Mr Matt Lee
HAVN BF 360 Flow: The Best PC Case for Airflow in 2025? | RTX 5070 PC Build
updated
Timecodes, though I don't recommend skipping for visual narrative reasons!
00:00 - A Package Arrives...
01:25 - Frame 4500X Overview
02:44 - Motherboard Assembly
04:25 - Frame 4500X Assembly
06:26 - A Strange Portal Appeared
07:02 - Cable Management Timelapse
07:45 - Build Resumes
08:39 - Noise Levels
09:01 - Airflow Visualization
09:23 - Cinematic & Desk Setup
11:20 - Coffee Thanks
11:26 - Matt Built an Actual Corsair?
With curved glass being all the rage in 2025, it was only a matter of time until Corsair entered with their own addition. The Frame 4500X is an excellent panoramic PC case, offering plenty of space for hardware whilst retaining a relatively modest footprint.
Whilst the Frame 4500X may look like a dual chamber chassis on face value, the PSU is located at the bottom and small chamber to the rear allows for cable management and drive storage.
With simplicity of building in mind, Corsair included three Reverse-rotor iCUE LINK LX-R RGB intake fans which do a fantastic job of moving air into the chassis. You'll also find the INFINIRAIL system to allow the flexible installation of 120mm and 140mm fans.
Final conclusion following build hardware list:
๐๐๐ข๐ง ๐ฉ๐๐ซ๐ญ๐ฌ ๐ข๐ง๐๐ฅ๐ฎ๐๐๐ ๐ข๐ง ๐ญ๐ก๐ ๐๐ฎ๐ข๐ฅ๐:
(๐๐๐ ๐๐ฆ๐๐ณ๐จ๐ง)
Case: Coming Son
CPU: amzn.to/3KndhT8ย
GPU: amzn.to/4nyn1Ziย
RAM: amzn.to/4pD51yFย
Ram Light Enhancement Kit: amzn.to/4gQGlPeย ย
MOBO: amzn.to/482HyR1ย
PSU: amzn.to/4mCvTfgย
PSU Cables: Coming Soon
Cooler: amzn.to/3KtmjOtย
Fans: amzn.to/3VxCpsRย
Storage: amzn.to/4nvivuYย
Thermal Paste: amzn.to/4mA7zdUย
Keyboard:ย amzn.to/4pLcCev
Mouse:ย amzn.to/4nt8IFC
Monitor: amzn.to/4ndJyuAย
Espresso Machine: amzn.to/40f3SSH
๐๐๐ข๐ง ๐ฉ๐๐ซ๐ญ๐ฌ ๐ข๐ง๐๐ฅ๐ฎ๐๐๐ ๐ข๐ง ๐ญ๐ก๐ ๐๐ฎ๐ข๐ฅ๐:
(๐๐ ๐๐ฆ๐๐ณ๐จ๐ง)
Case: amzn.to/4nULpo6ย
CPU: amzn.to/4nfXLaeย
GPU: amzn.to/4gIEZ98ย
RAM: amzn.to/3KkuMUcย
Ram Light Enhancement Kit: amzn.to/46r4B72ย
MOBO: amzn.to/48AVYbgย
PSU: amzn.to/46FFonYย
PSU Cables: amzn.to/4mwT2zJย
Cooler: amzn.to/3KmTuTNย
Fans: amzn.to/4njTpijย
Storage: amzn.to/4nmgJvNย
Thermal Paste: amzn.to/4pFnM4fย
Keyboard:ย amzn.to/4pM1e1S
Mouse:ย amzn.to/4pMZcyG
Lamp: amzn.to/4jBUbWsย
Espresso Machine: amzn.to/40lcTsK
๐๐ฌ ๐๐ง ๐๐ฆ๐๐ณ๐จ๐ง ๐๐ฌ๐ฌ๐จ๐๐ข๐๐ญ๐, ๐ ๐ฆ๐๐ฒ ๐๐๐ซ๐ง ๐๐ซ๐จ๐ฆ ๐ช๐ฎ๐๐ฅ๐ข๐๐ฒ๐ข๐ง๐ ๐ฉ๐ฎ๐ซ๐๐ก๐๐ฌ๐๐ฌ.
The Corsair Frame 4500X is very well executed panoramic PC case offering a solid build experience with excellent hardware support. Though, cable management space is a little on the tight side, it's great to see that it supports Corsairs SHIFT PSU series too!
What's your thoughts on the Corsair Frame 4500X? Could you see this setup on your desk? Let's chat in the comments!
---------------------------------------------------------------
Watch more comic shorts on the โโ @MMLComics channel!
Subscribe to my 2nd Channel for more! โโ @MrMattLeeV2
---------------------------------------------------------------
โโ BUY ME A COFFEE! โโ
Show you support for the channel. Bonus - get a shout out in the next video! No subscription or sign-up required!
buymeacoffee.com/MrMattLee
---------------------------------------------------------------
Please like and subscribe if you want to see more content like this, also follow the link below to my Instagram where you will find the photoshoot pictures and lots more like-minded content :D
----------------------------------------------------------------
Find me on socials:
instagram.com/mr_matt_lee
twitter.com/mr_matt_lee
facebook.com/MrMatthewLee
Timecodes, though I don't recommend skipping for visual narrative reasons! (๐๐ฎ๐๐ฅ๐ข๐ญ๐ฒ ๐ก๐๐๐๐ฉ๐ก๐จ๐ง๐๐ฌ ๐จ๐ซ ๐ฌ๐ฉ๐๐๐ค๐๐ซ๐ฌ ๐ซ๐๐๐จ๐ฆ๐ฆ๐๐ง๐๐๐ ๐ญ๐ก๐ซ๐จ๐ฎ๐ ๐ก๐จ๐ฎ๐ญ)
00:00 - How Did We Get Here?
01:11 - What's in the Box?
02:00 8.8" Universal Screen Overview
02:49 - Screen 1 Installation
03:58 - Screen 2 Installation
05:53 - Airflow Visualization
06:11 - Cinematic & Desk Setup
08:08 - Coffee Thanks
08:15 - Matt & Sam Get Trapped
It goes without saying that Lian Li have been pushing hard with their LCD displays over the last year and the new 8.8" Universal Screen is an excellent addition to their line-up!
Not just for Lian Li's own cases, the Universal Screen can be adapted to fit within any build thanks to the flexible mounting bracket which simply installs over four existing fan screw holes. Using the L-Connect 3 software, adding themes, performance data and video files is completely effortless too.
Initally I had my reservations about installing not one, but two of these screens inside the O11 Mini V2, but truth be told, there was adequate space and they certainly bring a unique vibe to the overall setup!
Final conclusion following build hardware list:
๐๐๐ ๐๐ฆ๐๐ณ๐จ๐ง ๐๐ข๐ง๐ค๐ฌ:
Screen: amzn.to/4gGrPti
Case: amzn.to/4o0f7bl
CPU: amzn.to/4pEkqyL
GPU: amzn.to/4nJveda
RAM: amzn.to/46txPRn
Motherboard: amzn.to/48mUJfF
PSU: amzn.to/4moPi3a
Cooler: amzn.to/47S0MbX
Fans (regular): amzn.to/4mvIUYb
Fans (reverse blade): amzn.to/3Iulmou
Fans (LCD): amzn.to/4mpqqIy
Fans: (LCD reverse blade): amzn.to/4mvJ2XF
Storage: amzn.to/4nDYnGv
Keyboard: amzn.to/3W3fPZ7
Mouse: amzn.to/4pykyzD
Monitor: amzn.to/4ndJyuA
Espresso Machine: amzn.to/40f3SSH
๐๐ ๐๐ฆ๐๐ณ๐จ๐ง ๐๐ข๐ง๐ค๐ฌ:
Screen: Coming Soon
Case: amzn.to/4nyJOnw
CPU: amzn.to/420CYyV
GPU: amzn.to/4gzA5uT
RAM: amzn.to/4pybYks
Motherboard: amzn.to/4py8o9M
PSU: amzn.to/3W0cfyU
Cooler: amzn.to/4px3f1L
Fans (regular): amzn.to/4nc6dHs
Fans (reverse blade): amzn.to/3IaPLZ0
Fans (LCD): amzn.to/42GheZj
Fans (LCD Reverse Blade): amzn.to/3IvM7sBย ย
Storage: amzn.to/4nw0pZP
Keyboard: amzn.to/4ni4XCX
Mouse: amzn.to/4nAYQcl
Monitor: amzn.to/3VmZuyl
Lamp: amzn.to/4jBUbWs
Espresso Machine: amzn.to/40lcTsK
๐๐ฌ ๐๐ง ๐๐ฆ๐๐ณ๐จ๐ง ๐๐ฌ๐ฌ๐จ๐๐ข๐๐ญ๐, ๐ ๐ฆ๐๐ฒ ๐๐๐ซ๐ง ๐๐ซ๐จ๐ฆ ๐ช๐ฎ๐๐ฅ๐ข๐๐ฒ๐ข๐ง๐ ๐ฉ๐ฎ๐ซ๐๐ก๐๐ฌ๐๐ฌ.
As always it's a pleasure to see Lian Li innovating. The 8.8" Universal LCD screen simplifies what has typically been quite a complicated process; installing a third party screen and adapting it to work as a hardware monitor.
With personalisation and customisation in mind, this one certainly hits the spot and looks the part! What's your thoughts on Lian Li's latest LCD Screen? Could you see yourself with it? Let's talk in the comments!
๐๐๐ญ๐๐ก ๐จ๐ฎ๐ซ ๐ฉ๐ซ๐๐ฏ๐ข๐จ๐ฎ๐ฌ ๐๐๐ ๐๐ข๐ง๐ข ๐๐ ๐๐ฎ๐ข๐ฅ๐ ๐ฏ๐ข๐๐๐จ ๐ก๐๐ซ๐:
youtube.com/watch?v=r0K3Az0DXj4
---------------------------------------------------------------
Subscribe to MML Comics here! @MMLComics
youtube.com/@MMLComics
Subscribe to my 2nd Channel for Shorts and more! @MrMattLeeV2
---------------------------------------------------------------
โโ BUY ME A COFFEE! โโ
Show you support for the channel. Bonus - get a shout out in the next video! No subscription or sign-up required!
buymeacoffee.com/MrMattLee
---------------------------------------------------------------
Please like and subscribe if you want to see more content like this, also follow the link below to my Instagram where you will find the photoshoot pictures and lots more like-minded content :D
----------------------------------------------------------------
Find me on socials:
instagram.com/mr_matt_lee
twitter.com/mr_matt_lee
facebook.com/MrMatthewLee
Timecodes, though I don't recommend skipping for visual narrative reasons! (Quality headphones or speakers recommended throughout)
00:00 - Montech Enters the Digital Era...
01:20 - Hyperflow Digital Overview
02:03 - Motherboard Assembly
04:07 - Montech HS02 Pro Assembly
06:06 - The Cable Management Handover
07:24 - Build Resumes...
08:28 - Noise Levels
08:54 - Airflow Visualization
09:17 - Cinematic & Desk Setup
11:31 - Coffee Thanks
11:38 - Bonus - HyperSNOW Hits Different!
LCD coolers have been all the rage for the last few years and that's not a bad thing. Monitoring CPU / GPU temps can be important, especially when optimising airflow etc. Montech's Hyperflow range just expanded to include the new 'Digital' variation into the line-up.
No GIFS, no animations... no complications. Just a simplified display which shows Graphics Card temperatures or Processor, both selectable in degrees and Fahrenheit. The simplified software automatically installs once you boot up the PC too. Coming in at just $99 for the 240mm and $119 for the 360mm, the Hyperflow Digital offers excellent price to performance.
For this build we opted to use the Montech HS02 Pro chassis to full show off the pump housing and radiator from all angles and it didn't disappoint. The HS02 strikes a great balance for aesthetics and airflow.
Final conclusion following build hardware list:
USA Amazon Links:
Hyperflow Digital: amzn.to/4nB63Jw
E28 Fans: amzn.to/4nln2Qy
Case: amzn.to/3IsBHtK
CPU: amzn.to/4pEkqyL
GPU: amzn.to/4nJveda
RAM: amzn.to/4pxxlCg
MOBO: amzn.to/4mrDSvA
PSU: amzn.to/3W4rNBH
Storage: amzn.to/4217Jnm
Keyboard: amzn.to/3K4GKkO
Mouse: amzn.to/4pykyzD
Monitor: amzn.to/4ndJyuA
Espresso Machine: amzn.to/40f3SSH
UK Amazon Links:
Hyperflow Digital: amzn.to/4nB63Jw
E28 Fans: amzn.to/4nln2Qy
Case: amzn.to/47S0YrO
CPU: amzn.to/420CYyV
GPU: amzn.to/4gzA5uT
RAM: amzn.to/42zEaJF
MOBO: amzn.to/46sDlU9
PSU: amzn.to/3Iw4Zb2
Storage: amzn.to/3VWjCYb
Keyboard: amzn.to/4mK3iFb
Mouse: amzn.to/4nAYQcl
Monitor: amzn.to/3VmZuyl
Lamp: amzn.to/4jBUbWs
Espresso Machine: amzn.to/40lcTsK
As an Amazon Associate, I may earn from qualifying purchases.
The Montech Hyperflow Digital is a great option for those seeking subtly and simplicity in a cost-effective package. Whilst I would like to see the ARGB sections on the pump housing to be more vibrant / brighter, this wouldn't particularly put me off purchasing, especially within a build with less ARGB.
Could you see yourself with the new Hyperflow Digital? Let's chat in the comments!
Special thanks to @Montech_HQ for supporting this project.
---------------------------------------------------------------
Subscribe to MML Comics here! @MMLComics
youtube.com/@MMLComics
Subscribe to my 2nd Channel for Shorts and more! @MrMattLeeV2
---------------------------------------------------------------
โโ BUY ME A COFFEE! โโ
Show you support for the channel. Bonus - get a shout out in the next video! No subscription or sign-up required!
buymeacoffee.com/MrMattLee
---------------------------------------------------------------
Please like and subscribe if you want to see more content like this, also follow the link below to my Instagram where you will find the photoshoot pictures and lots more like-minded content :D
----------------------------------------------------------------
Find me on socials:
instagram.com/mr_matt_lee
twitter.com/mr_matt_lee
facebook.com/MrMatthewLee
Timecodes, though I don't recommend skipping for visual narrative reasons!
00:00 - Sam Receives a Gift
01:15 - Prime AP202 White Overview
02:12 - Motherboard Assembly
04:18 - Prime AP202 Assembly
06:51 - Managing the Cables!
07:30 - GPU Install & Finalise
08:26 - Noise Levels
08:49 - Airflow Visualization
09:14 - Cinematic & Desk Setup
10:53 - Coffee Thanks
10:59 - Who the Heck is Noct-Owl!?
It goes without saying that the ASUS Prime AP202 is a solid choice for a Micro ATX chassis. In this configuration, Sam opted to install the side fans as intake to assist the CPU cooler with airflow, whilst the bottom intake fans directly cool the GPU.
With low volume in mind, the Noctua cooling setup always hits the sweet spot. At 50% fan speeds, the PC was basically inaudible over ambient room sound and that's something we never take for granted when gaming and editing.
Also, after what feels like an eternity of waiting fo ASUS to drop their white GPUโs, Matt finally got hands on and purchased a 5000 series. How great does the PRIME RTX 5070 look in all white?
Final conclusion following build hardware list:
๐๐๐ข๐ง ๐ฉ๐๐ซ๐ญ๐ฌ ๐ข๐ง๐๐ฅ๐ฎ๐๐๐ ๐ข๐ง ๐ญ๐ก๐ ๐๐ฎ๐ข๐ฅ๐:
(๐๐๐ ๐๐ฆ๐๐ณ๐จ๐ง)
Case: amzn.to/3Vi3obH
CPU: amzn.to/4milu8h
GPU: amzn.to/462Vjhb
RAM: amzn.to/3IjdS7I
MOBO: amzn.to/4pjUiZG
PSU: amzn.to/46dr7Ad
Cooler: amzn.to/4mdLzp2
Fans: amzn.to/48hzs79
Storage: amzn.to/42rVJeE
Thermal Paste: amzn.to/4fHWeab
Keyboard (alternative): amzn.to/4mlao2x
Mouse: amzn.to/3KkgWRv
Monitor: amzn.to/46CjT8Q
Espresso Machine: amzn.to/40f3SSH
๐๐๐ข๐ง ๐ฉ๐๐ซ๐ญ๐ฌ ๐ข๐ง๐๐ฅ๐ฎ๐๐๐ ๐ข๐ง ๐ญ๐ก๐ ๐๐ฎ๐ข๐ฅ๐:
(๐๐ ๐๐ฆ๐๐ณ๐จ๐ง)
Case: amzn.to/46BnFze
CPU: amzn.to/3IfFRFo
GPU: amzn.to/46eHICd
RAM: amzn.to/46AuAc2
MOBO: amzn.to/3KjI5nG
PSU: amzn.to/4mkF8AP
Cooler: amzn.to/46juOmG
Fans: amzn.to/4mWvLs5
Storage: amzn.to/4pn8Vvk
Thermal Paste: amzn.to/4oVPUQD
Keyboard: not available
Mouse: amzn.to/3VcQgoj
Monitor: amzn.to/4gnepSx
Lamp: amzn.to/4jBUbWs
Espresso Machine: amzn.to/40lcTsK
๐๐ฌ ๐๐ง ๐๐ฆ๐๐ณ๐จ๐ง ๐๐ฌ๐ฌ๐จ๐๐ข๐๐ญ๐, ๐ ๐ฆ๐๐ฒ ๐๐๐ซ๐ง ๐๐ซ๐จ๐ฆ ๐ช๐ฎ๐๐ฅ๐ข๐๐ฒ๐ข๐ง๐ ๐ฉ๐ฎ๐ซ๐๐ก๐๐ฌ๐๐ฌ.
The ASUS Prime AP202 might be a premium case option for Micro ATX but it truly excels when it comes to showing off your hardware whilst being very functional.
As for the Noctua cooling, well... You all know that we're a sucker for that brown and beige aesthetic at this point!
What's your thoughts on the Prime AP202 Chassis? Would you go with the light and brown theme, or prefer the blackout style instead? Let's chat in the comments!
Credits:
๐ฅ Filmed by Sam
๐ฅ๏ธ Edited by Matt
---------------------------------------------------------------
Watch more comic shorts on the โโ @MMLComics channel!
Subscribe to my 2nd Channel for more! โโ @MrMattLeeV2
---------------------------------------------------------------
โโ BUY ME A COFFEE! โโ
Show you support for the channel. Bonus - get a shout out in the next video! No subscription or sign-up required!
buymeacoffee.com/MrMattLee
---------------------------------------------------------------
Please like and subscribe if you want to see more content like this, also follow the link below to my Instagram where you will find the photoshoot pictures and lots more like-minded content :D
----------------------------------------------------------------
Find me on socials:
instagram.com/mr_matt_lee
twitter.com/mr_matt_lee
facebook.com/MrMatthewLee
Timecodes, though I don't recommend skipping for visual narrative reasons! (Quality headphones or speakers recommended throughout)
00:00 - Choices, Choices...
00:56 - Phanteks XT M3 Overview
02:05 - Motherboard Assembly
04:37 - Phanteks XT M3 Assembly
07:51 - Matt is now the Cable Master?
09:25 - Build Resumes...
10:28 - Noise Levels
10:53 - Airflow Visualization
11:18 - Cinematic & Desk Setup
13:27 - Coffee Thanks!
13:34 - Being a SATA cable Hurts... (MML COMICS)
It goes without saying that Micro ATX has been one of the most popular form factors featured on the channel, so it was only a matter of a time until the XT M3 from Phanteks landed on the build desk.
As noted, this version came without any fans as standard, the result... a price tag of just ยฃ49.99 here in the UK. It's hard to pick any faults at all with the price to value in mind! Sure, the materials aren't premium, but the XT M3 punches above it's weight when you consider any other cases sitting at a similar price.
With airflow and GPU compatibility in mind, this case is unmatched at the price too. I opted to install Phantek's own T30 fans throughout (we do love the T30's here on the channel) and the airflow exceeded my expectations, in part due to the well thought-out fan cut-outs around the chassis.
Final conclusion following build hardware list:
USA Amazon Links:
Case without fans: Coming soon
Case with fans: amzn.to/4gmPEWL
CPU: amzn.to/4lXCErH
GPU: amzn.to/3IatpXm
RAM Alternative: amzn.to/48b9lyy
MOBO: amzn.to/3I5fjqi
PSU: amzn.to/4phqugu
Cooler: amzn.to/4m0zLq3
9x Fans: amzn.to/3JPfyX6
Storage: amzn.to/483n8XY
Thermal Paste: amzn.to/3Ia8jZe
Keyboard: amzn.to/3V51BGN
Mouse: amzn.to/465AQqM
Desk Mat: amzn.to/3V7qku9
Monitor: amzn.to/46fEIFR
Espresso Machine: amzn.to/4apOwOY
UK Amazon Links:
Case without fans: amzn.to/4mQKNzp
Case with fans: Coming Soon
CPU: amzn.to/4m4CJdh
GPU: amzn.to/4niUlDi
RAM: amzn.to/46rPjP2
MOBO: amzn.to/4noMfsV
PSU: amzn.to/45SiJFX
Cooler: amzn.to/3JRaSjt
9x Fans: amzn.to/3JOSx6A
Storage: amzn.to/3JJJQKS
Thermal Paste: amzn.to/3I5fH8e
Keyboard: amzn.to/4mTW3LD
Mouse: amzn.to/4635UsF
Desk Mat: amzn.to/4gddswg
Monitor: amzn.to/45TB59F
Espresso Machine: amzn.to/40lcTsK
As an Amazon Associate, I may earn from qualifying purchases.
The Phanteks XT M3 is by far one of the best value Micro ATX Cases I've had the pleasure of building with. Sure, it comes with a few catches, such as the limitation of just 120mm fans... but with that shortcoming aside, there's a lot to love with this one.
Premium build with a cheap case, or low budget build... the XT M3 ticks all the right boxes for small size with excellent compatibility.
Could you see yourself with the Phanteks XT M3? Let's chat in the comments!
Don't forget to subscribe to @MMLComics for more toony fun!
---------------------------------------------------------------
Subscribe to my 2nd Channel for more! @MrMattLeeV2
---------------------------------------------------------------
โโ BUY ME A COFFEE! โโ
Show you support for the channel. Bonus - get a shout out in the next video! No subscription or sign-up required!
buymeacoffee.com/MrMattLee
---------------------------------------------------------------
Please like and subscribe if you want to see more content like this, also follow the link below to my Instagram where you will find the photoshoot pictures and lots more like-minded content :D
----------------------------------------------------------------
Find me on socials:
instagram.com/mr_matt_lee
twitter.com/mr_matt_lee
facebook.com/MrMatthewLee
Timecodes, though I don't recommend skipping for visual narrative reasons! (Quality headphones or speakers recommended throughout)
00:00 - A Subscriber Request
01:00 - Motherboard Assembly
02:16 - Phantom Spirit 120 SE Installation
03:24 - NZXT H5 Flow Assembly
05:32 - Cable Management on a budget
07:06 - Build Resumes...
08:05 - Noise Levels
08:28 - Airflow Visualization
08:55 - Cinematic & Desk Setup
11:13 - Matt Got Scammed! (MML Comics)
When it comes to building a stylish yet affordable gaming PC, there will always be a lot of factors to consider, such as your end goal; noise levels, or performance etc. For this specific build we wanted to give ourselves a modest budget of around $1200 to come up with something that's very capable without many compromises.
It's hard to think that the Thermalright Phantom Spirit 120 SE comes in at just $30... Combine that with a bunch of additional matching Thermalright fans at an axtra $20, then the cooling is complete for just $50 total. Sure, they're not the quietest fans in the world, but for the price it's very difficult to beat!
As for the NZXT H5 Flow, this is one of the best mid-tower airflow focussed cases you can buy right now thanks to all of the perforations around the panels.
Final conclusion following build hardware list:
USA Amazon Links:
Case: amzn.to/3HAUsLr
CPU: amzn.to/4ndPweB
GPU: amzn.to/4mZYrzS
RAM: amzn.to/3VoHmnt
MOBO: amzn.to/3UOYnXU
PSU: amzn.to/45Z7qdV
Cooler: amzn.to/47TMFTr
Fans: amzn.to/3UVbczR
Storage: amzn.to/45XWXPI
Thermal Paste: amzn.to/4fHWeab
Keyboard (alternative): amzn.to/45ZxtBM
Mouse: amzn.to/4n7vD8O
Monitor: amzn.to/3HD71G1
Espresso Machine: amzn.to/40f3SSH
UK Amazon Links:
Case: amzn.to/4p0kY1i
CPU: amzn.to/4lRehMe
GPU: amzn.to/4g0EC9i
RAM: amzn.to/45GwnvP
MOBO: amzn.to/3HYQoEF
PSU: amzn.to/4my8ufQ
Cooler: amzn.to/4g1aJFV
Fans: amzn.to/45FxonR
Storage: amzn.to/4mHqrsw
Thermal Paste: amzn.to/4oVPUQD
Keyboard: amzn.to/4lXCYH9
Mouse: amzn.to/47gzP1p
Monitor: amzn.to/420e9mC
Lamp: amzn.to/4jBUbWs
Espresso Machine: amzn.to/40lcTsK
As an Amazon Associate, I may earn from qualifying purchases.
With cost-saving in mind, Thermalright deliver the goods when it comes to affordable PC cooling. Similarly, NZXT have been long known for their relatively inexpensive PC cases. Join both of these together and there's a lot to love with this one.
Is it possible to retain a premium aesthetic on a modest budget? How does this visually compare to some of the Noctua focussed builds you've seen on the channel? Let's chat in the comments!
Also, don't forget to subscribe to @MMLComics for more PC content humour :D
---------------------------------------------------------------
Subscribe to my 2nd Channel for more! @MrMattLeeV2
---------------------------------------------------------------
โโ BUY ME A COFFEE! โโ
Show you support for the channel. Bonus - get a shout out in the next video! No subscription or sign-up required!
buymeacoffee.com/MrMattLee
---------------------------------------------------------------
Please like and subscribe if you want to see more content like this, also follow the link below to my Instagram where you will find the photoshoot pictures and lots more like-minded content :D
----------------------------------------------------------------
Find me on socials:
instagram.com/mr_matt_lee
twitter.com/mr_matt_lee
facebook.com/MrMatthewLee
All of the PC build clips featured here have been taken from other videos right here on the channel. Please do browse through if something caught your eye to see the full build video, cinematics and hardware specs!
Timecodes, though I don't recommend skipping for visual narrative reasons!
00:00 - Introduction to Air Coolers
01:15 - ID Cooling's Small Form Cooler
02:32 - Arctic Freezes the Competition
04:02 - Be Quiet's Stealthy Giant
05:30 - Noctua's GOAT
07:42 - Noctua's Larger GOAT
10:02 - Thermalright Hits The Spot
10:50 - Scythe Goes Hard
11:45 - To Summarise...
12:37 - The LARGEST Cooler EVER
When it comes to air cooling your CPU, there are so many options readily available. Of course, there are so many more tower coolers we would've loved to include in this list for their own reasons. The seven we chose to showcase in this video have been among some of the best we've personally tested and continue to use through 2025.
Here's a selection of my personal recommendations for Air Coolers in 2025:
(USA Amazon)
ID Cooling IS-55 Black: amzn.to/4lKSpSO
ID Cooling IS-55 RGB: amzn.to/4lG2Cju
Arctic Freezer 36 Black: amzn.to/463wS38
Arctic Freezer 36 White: amzn.to/4mNWqHH
Arctic Freezer 36 Copper: amzn.to/4oOOpDD
BE Quiet DarkRock Pro 5: amzn.to/3Jsqg5D
Noctua NH-U12A: amzn.to/45VSkWK
Noctua NH-D15 G2: amzn.to/47bBHbM
Thermalright Peerless Assassin: amzn.to/4gaf5eh
Scythe Fuma 3: amzn.to/420fdXA
(UK Amazon)
ID Cooling IS-55 Black: amzn.to/4mrYkND
ID Cooling IS-55 ARGB: amzn.to/4mrUcxd
Arctic Freezer 36 Black: amzn.to/4mSe4t7
Arctic Freezer 36 White: amzn.to/4mw2WTe
Arctic Freezer 36 Copper: amzn.to/4mYd0nQ
BE Quiet DarkRock Pro 5: amzn.to/4fZa8os
Noctua NH-U12A: amzn.to/45DM9Gk
Noctua NH-D15 G2: amzn.to/3JMkKux
Thermalright Peerless Assassin: amzn.to/4lRTfgQ
Scythe Fuma 3: amzn.to/3JwB8zt
As an Amazon Associate, I may earn from qualifying purchases.
Air coolers are without a doubt a time-proven method of CPU cooling and often preferred over liquid for longevity and reliability. With that being said - what CPU cooler are you currently using in your PC? Did any from this list stand out to you? Let's chat in the comments!
Don't forget to subscribe to @MMLComics for more quirky animated PC fun too!
---------------------------------------------------------------
Subscribe to my 2nd Channel for more! @MrMattLeeV2
---------------------------------------------------------------
โโ BUY ME A COFFEE! โโ
Show you support for the channel. Bonus - get a shout out in the next video! No subscription or sign-up required!
buymeacoffee.com/MrMattLee
----------------------------------------------------------------
Find me on socials:
instagram.com/mr_matt_lee
twitter.com/mr_matt_lee
facebook.com/MrMatthewLee
twitter.com/mr_matt_lee
facebook.com/MrMatthewLee
--------------------------
Timecodes, though I don't recommend skipping for visual narrative reasons! (Quality headphones or speakers recommended throughout)
00:00 - Let's Recap
00:37 - Present Day: A Request
01:20 - Motherboard Assembly
03:39 - Fractal Design EPOCH Assembly
05:36 - Cable Management Begins
07:17 - Build Resumes
08:20 - Noise Levels
08:44 - Airflow Visualization
09:09 - Cinematic & Desk Setup
11:08 - Coffee Thanks
11:14 - I've Seen The light!? (MML COMICS)
Having recently built with the Fractal Design Epoch for a blackout assembly, I we felt it was perfectly appropriate to check out the white version!
It goes without saying that the white Epoch case both looks and feels rather premium, so rather than saturate it with RGB lighting, the idea here was to bring in a sense of monochrome for those whites and greys.
The Redux line from Noctua isn't often showcased within 'aesthetic' PC builds, but when you tie together the correct components, you truly end up with something different, something unique...
Not only that, this PC build runs quietly and ticks all of the right boxes for 1440p and even 4K gaming. What's not to love about that?!
Final conclusion following build hardware list:
๐๐๐ ๐๐ฆ๐๐ณ๐จ๐ง ๐๐ข๐ง๐ค๐ฌ:
Case: amzn.to/41ICVra
CPU: amzn.to/3V2Y8bH
GPU: amzn.to/3HA1kbI
RAM: amzn.to/419AcXF
MOBO: amzn.to/417SIQc
PSU: amzn.to/4mCtt1j
Cable Extensions: amzn.to/45TRiLS
Cooler: amzn.to/45TkEKg
Fans: amzn.to/4fFcYyJ
Fan Corners: amzn.to/3HDFrZ2
Storage: amzn.to/45m6wsX
Thermal Paste: amzn.to/4fHWeab
Keyboard (alternative): amzn.to/3V2YeQB
Mouse: amzn.to/47ytv5o
Headset: amzn.to/3HCh8L1
Monitor: amzn.to/4mt8kGN
Espresso Machine: amzn.to/40f3SSH
๐๐ ๐๐ฆ๐๐ณ๐จ๐ง ๐๐ข๐ง๐ค๐ฌ:
Case: amzn.to/41MnxKq
CPU: amzn.to/3UwjqOQ
GPU: amzn.to/417R4y7
RAM: amzn.to/4mm4wHb
MOBO: amzn.to/3UwtUxKย ย
PSU: amzn.to/4mCtQcd
Cable Extensions: amzn.to/4oE9ksM
Cooler: amzn.to/4oF3wiR
Fans: amzn.to/45j9SwK
Fan Corners: Currently Unavailable
Storage: amzn.to/4oFd8Kw
Thermal Paste: amzn.to/4oVPUQD
Keyboard (alternative): amzn.to/47wgadK
Mouse: amzn.to/4fBoQ4G
Headset: amzn.to/4fCH5GS
Monitor: amzn.to/3HuJSFx
Lamp: amzn.to/4jBUbWs
Espresso Machine: amzn.to/40lcTsK
๐๐ฌ ๐๐ง ๐๐ฆ๐๐ณ๐จ๐ง ๐๐ฌ๐ฌ๐จ๐๐ข๐๐ญ๐, ๐ ๐ฆ๐๐ฒ ๐๐๐ซ๐ง ๐๐ซ๐จ๐ฆ ๐ช๐ฎ๐๐ฅ๐ข๐๐ฒ๐ข๐ง๐ ๐ฉ๐ฎ๐ซ๐๐ก๐๐ฌ๐๐ฌ.
Fractal Design know how to make a quality case and the white EPOCH certainly ticks all the right boxes for being stylish and affordable. As far as airflow goes, this one is a winner too!
Could you see yourself with the EPOCH case? Perhaps the Noctua REDUX line for your next cooling setup? Let's chat in the comments! Don't forget to subscribe to @MMLComics too!
---------------------------------------------------------------
Subscribe to my 2nd Channel for more! @MrMattLeeV2
---------------------------------------------------------------
โโ BUY ME A COFFEE! โโ
Show you support for the channel. Bonus - get a shout out in the next video! No subscription or sign-up required!
buymeacoffee.com/MrMattLee
---------------------------------------------------------------
Please like and subscribe if you want to see more content like this, also follow the link below to my Instagram where you will find the photoshoot pictures and lots more like-minded content :D
----------------------------------------------------------------
Find me on socials:
instagram.com/mr_matt_lee
twitter.com/mr_matt_lee
facebook.com/MrMatthewLee
Timecodes, though I don't recommend skipping for visual narrative reasons! (Quality headphones or speakers recommended throughout)
00:00 - A Magical Fridge Appeared
01:42 - Xtender VG Overview
02:36 - Motherboard Assembly
03:56 - The Liquid Freezer III PRO 420
04:40 - Xtender VG Assembly
06:33 - Whoa, Sam! Whoa...
07:40 - Vertical GPU Fitment Issues
07:57 - Build Resumes
08:47 - Noise Levels
09:15 - Airflow Visualization
09:36 - Cinematic & Desk Setup
11:43 - Coffee Thanks
11:50 - Jurassic 'Arctic' Park is REAL (BONUS)
14:04 - Bloopers & Outtakes
Most of us know Arctic for their epic CPU coolers, ridiculously powerful case fans and not to mention their excellent thermal pastes. Who would've known they'd come in so hard in 2025 with the new Xtender VG (and... fridges?!)
The Xtender VG has the presence of a dual chamber chassis for those oh-so desirable panoramic views, but without the width of a typical dual chamber case. The Xtender houses the PSU at the bottom which keeps the overall footprint smaller, albeit in the name of being taller.
I'm stoked to see Arctic are finally embracing the reversed blade fans with their P14 Pro line. They not only look the part inside this chassis, but perform above average too. The VG (Vertical Graphics) version of the Xtender is able to revert to standard GPU orientation too.
Within all of this awesomeness, Arctic have also dropped their Liquid Freezer III PRO 420 AIO's which are cooling titans for sure. Need more radiator airflow than you'll ever need? Those P14 Pro fans have you covered.
Final conclusion following build hardware list:
๐๐๐ ๐๐ฆ๐๐ณ๐จ๐ง ๐๐ข๐ง๐ค๐ฌ:
Case: Coming Soon
CPU: amzn.to/45qM1Kj
GPU: not available
RAM: amzn.to/4ljqkSk
MOBO: amzn.to/46SkHqU
PSU (alternative): amzn.to/40XP3V3
Cooler (420): Coming Soon
Cooler (360): amzn.to/4mWnqo3
Cooler (240): amzn.to/4lplzGW
Storage: amzn.to/40YxsMP
Thermal Paste: amzn.to/45cVS7N
Keyboard (alternative): amzn.to/4ouxsy7
Mouse: amzn.to/4fyP487
Monitor: amzn.to/4mt8kGN
Espresso Machine: amzn.to/40f3SSH
๐๐ ๐๐ฆ๐๐ณ๐จ๐ง ๐๐ข๐ง๐ค๐ฌ:
White Case: amzn.to/4fvfHul
Black Case: amzn.to/45u9xGt
CPU: amzn.to/3HiwPHg
GPU: amzn.to/4mF3N3v
RAM: amzn.to/4fPyxgd
MOBO: amzn.to/4fuZ6XH
PSU: amzn.to/4lpkTkZ
Cooler (420): amzn.to/4mF3SEl
Storage: amzn.to/45rGzGX
Thermal Paste: amzn.to/47phlf4
Keyboard (alternative): amzn.to/4oJIDTQ
Mouse: amzn.to/41B8vHg
Monitor: amzn.to/3HuJSFx
Lamp: amzn.to/4jBUbWs
Espresso Machine: amzn.to/40lcTsK
๐๐ฌ ๐๐ง ๐๐ฆ๐๐ณ๐จ๐ง ๐๐ฌ๐ฌ๐จ๐๐ข๐๐ญ๐, ๐ ๐ฆ๐๐ฒ ๐๐๐ซ๐ง ๐๐ซ๐จ๐ฆ ๐ช๐ฎ๐๐ฅ๐ข๐๐ฒ๐ข๐ง๐ ๐ฉ๐ฎ๐ซ๐๐ก๐๐ฌ๐๐ฌ.
It's fantastic to see Arctic dipping their toes in the PC case market and the Xtender VG is a solid first addition to their line-up. Combined with the new Liquid Freezer III PRO 420, the airflow from this thing is immense.
Could you see yourself with the new Arctic Xtender VG, Liquid Freezer III Pro, or both? Let's chat in the comments!
Don't forget to subscribe to @MMLComics too!
---------------------------------------------------------------
Subscribe to my 2nd Channel for more! @MrMattLeeV2
---------------------------------------------------------------
โโ BUY ME A COFFEE! โโ
Show you support for the channel. Bonus - get a shout out in the next video! No subscription or sign-up required!
buymeacoffee.com/MrMattLee
---------------------------------------------------------------
Please like and subscribe if you want to see more content like this, also follow the link below to my Instagram where you will find the photoshoot pictures and lots more like-minded content :D
----------------------------------------------------------------
Find me on socials:
instagram.com/mr_matt_lee
twitter.com/mr_matt_lee
facebook.com/MrMatthewLee
Timecodes, though I don't recommend skipping for visual narrative reasons! (Quality headphones or speakers recommended throughout)
00:00 - Intro: EPOCH Overview
01:36 - Motherboard Assembly
03:36 - Epoch Assembly
05:55 - Sam is LIT (cable management)
07:54 - Build Resumes...
09:04 - Noise Levels
09:28 - Airflow Visualization
09:49 - Cinematic & Desk Setup
11:54 - Coffee Thanks & MML Comic Episode
13:27 - Outtakes & Bloopers
The Epoch series from Fractal Design was an unexpected but very welcomed addition to their PC Case line-up. Whilst the wood panels on the North have been iconic for many, it goes without saying that wood on PC cases isn't for everybody.
The Epoch retains the same build quality, dimensions and hardware support as the North which isn't a bad thing. The front panel being all unrestricted mesh allows for excellent airflow too. The mometum fans which came with this case would've been more than adequate, but with blackout in mind, we had to switch them for Silent Wing Pro 4's and we had no complaints.
The overall theme with the blackout Be Quiet! hardware combined with the the Epoch's monochromatic style really hits different with this one and we love it. It's worth noting that the 'black' version of Epoch is more grey than it is black... certainly something to keep in mind.
Final conclusion following build hardware list:
๐๐๐ ๐๐ฆ๐๐ณ๐จ๐ง ๐๐ข๐ง๐ค๐ฌ:
Case: amzn.to/4mpZp8y
CPU: amzn.to/478yzNG
GPU: amzn.to/47eqB5F
Vertical GPU Mount: amzn.to/3HdBOZI
RAM: amzn.to/4mq2LZ7
MOBO: amzn.to/3JgAnKs
PSU: amzn.to/47ibEPU
Cooler: amzn.to/4ofV5u2
Fans: amzn.to/4lRzZRa
Storage: amzn.to/4ojR1ca
Thermal Paste: amzn.to/3UJfHgI
Keyboard: amzn.to/3IWcDeM
Mouse: amzn.to/45xPLuI
Monitor: amzn.to/4kPI1IQ
Espresso Machine: amzn.to/40f3SSH
๐๐ ๐๐ฆ๐๐ณ๐จ๐ง ๐๐ข๐ง๐ค๐ฌ:
Case: amzn.to/4msHazm
CPU: amzn.to/46DDmXl
GPU: amzn.to/41a72I7
Vertical GPU Mount: amzn.to/4fEH5Xb
RAM: amzn.to/4mnqvgr
MOBO: amzn.to/45lxtf6
PSU: amzn.to/45wGLWO
Cooler: amzn.to/3UFrYTk
Fans: amzn.to/3IQgrOG
Storage: amzn.to/450AEdd
Thermal Paste: amzn.to/3J27KRf
Keyboard: amzn.to/3IYj9Sb
Mouse: amzn.to/4leHYXx
Monitor:ย ย amzn.to/3TTQUX8
Lamp: amzn.to/4jBUbWs
Espresso Machine: amzn.to/40lcTsK
๐๐ฌ ๐๐ง ๐๐ฆ๐๐ณ๐จ๐ง ๐๐ฌ๐ฌ๐จ๐๐ข๐๐ญ๐, ๐ ๐ฆ๐๐ฒ ๐๐๐ซ๐ง ๐๐ซ๐จ๐ฆ ๐ช๐ฎ๐๐ฅ๐ข๐๐ฒ๐ข๐ง๐ ๐ฉ๐ฎ๐ซ๐๐ก๐๐ฌ๐๐ฌ.
Fractal Design continue to refresh their designs rather than replace them entirely, this is always something we love to see in the PC DIY community. As with all Fractal Design products, the EPOCH oozes quality, style and performance, all wrapped up into a very appealing bundle!
Could you see yourself with the new EPOCH case? Let's chat in the comments! Don't forget to subscribe to @MMLComics too!
---------------------------------------------------------------
Subscribe to my 2nd Channel for more! @MrMattLeeV2
---------------------------------------------------------------
โโ BUY ME A COFFEE! โโ
Show you support for the channel. Bonus - get a shout out in the next video! No subscription or sign-up required!
buymeacoffee.com/MrMattLee
---------------------------------------------------------------
Please like and subscribe if you want to see more content like this, also follow the link below to my Instagram where you will find the photoshoot pictures and lots more like-minded content :D
----------------------------------------------------------------
Find me on socials:
instagram.com/mr_matt_lee
twitter.com/mr_matt_lee
facebook.com/MrMatthewLee
Timecodes, though I don't recommend skipping for visual narrative reasons! (Quality headphones or speakers recommended throughout)
00:00 - Intro / Recap
01:07 - O11D Mini V2 Overview
02:17 - Motherboard Assembly
04:26 - O11D Mini V2 Assembly
07:08 - Shapeshifting is banned
08:14 - In Goes the Graphics Card
09:24 - Noise Levels
09:45 - Airflow Visualization
10:12 - Cinematic & Desk Setup
12:11 - Coffee, BONUS COMIC & Bloopers
It goes without saying that the original O11D Mini from Lian Li has been one of the most popular cases for the last 5 years in the PC DIY space thanks to the epic hardware support within a relatively compact form factor.
The V2 O11 Dynamic Mini is only 2 litres larger than the original, but brings some very welcomed improvements, including full size ATX PSU support, 10-degree angled bottom intake fans and a broader selection of radiator adaptability thanks to the shiftable motherboard position.
When it comes to airflow, the O11D Mini V2 is excellent as to be expected, although those bottom intake fans being so close to the desktop can increase noise levels, especially higher up the RPM range. This turned out to be a non-issue though.
Final conclusion following build hardware list:
USA Amazon Links:
Case: Coming Soon
CPU: amzn.to/45hxLVe
GPU: amzn.to/46inJnW
RAM: amzn.to/411L49S
MOBO: amzn.to/44HDunb
PSU: amzn.to/4o1402x
Cooler: amzn.to/4kQazlK
Fans (regular): amzn.to/4m5OwbJ
Fans (reverse): amzn.to/4mb97vq
Fans LCD (regular): amzn.to/44VD23t
Fans LCD (reverse): amzn.to/3TRFsuY
Storage: amzn.to/4nYLTKq
Thermal Paste: amzn.to/3UukjqQ
Keyboard: amzn.to/3GXGUJq
Mouse: amzn.to/44SQ7Mt
Monitor: amzn.to/4kPI1IQ
Espresso Machine: amzn.to/40f3SSH
UK Amazon Links:
Case: Coming Soon
CPU: amzn.to/4lMiAJQ
GPU: amzn.to/4f1Zr3Z
RAM: amzn.to/4nYKq6S
MOBO: amzn.to/4flPkqZ
PSU: amzn.to/4f0x3iJ
Cooler: amzn.to/46oTBYc
Fans (regular): amzn.to/3IKmX9r
Fans (reverse): amzn.to/3IKn3Ol
Fans LCD (regular): amzn.to/46oxIIy
Fans LCD (reverse): amzn.to/4kO54nH
Storage: amzn.to/4lHieEj
Thermal Paste: amzn.to/4584KKK
Keyboard: amzn.to/3TRErTG
Mouse: amzn.to/3TNWtGu
Monitor:ย ย amzn.to/3TTQUX8
Lamp: amzn.to/4jBUbWs
Espresso Machine: amzn.to/40lcTsK
As an Amazon Associate, I may earn from qualifying purchases.
As always it's a pleasure to see Lian Li innovation and bringing a fresh take on their more popular cases. The O11D Mini V2 ticks all the right boxes for a modern refresh on this case, but I can't help but wonder... when will the O11D Mini V2 AIR be released? Now that would certainly peak our interests too!
What's your thoughts on Lian Li's latest Mini chassis? Could you see yourself with it? Let's talk in the comments!
---------------------------------------------------------------
Subscribe to MML Comics here! @MMLComics
youtube.com/@MMLComics
Subscribe to my 2nd Channel for Shorts and more! @MrMattLeeV2
---------------------------------------------------------------
โโ BUY ME A COFFEE! โโ
Show you support for the channel. Bonus - get a shout out in the next video! No subscription or sign-up required!
buymeacoffee.com/MrMattLee
---------------------------------------------------------------
Please like and subscribe if you want to see more content like this, also follow the link below to my Instagram where you will find the photoshoot pictures and lots more like-minded content :D
----------------------------------------------------------------
Find me on socials:
instagram.com/mr_matt_lee
twitter.com/mr_matt_lee
facebook.com/MrMatthewLee
Timecodes, though I don't recommend skipping for visual narrative reasons!
00:00 - Bringing in the Beige
01:27 - PA401 Beige Overview
02:24 - Motherboard Assembly
04:34 - ProArt PA401 Beige Assembly
06:04 - A Wild Cable Manager Appears
07:06 - Build Resumes
08:11 - Noise Levels
08:32 - Airflow Visualization
08:50 - Cinematic & Desk Setup
10:43 - Coffee Thanks & BONUS MML Comic!
It goes without saying that creators typically enjoy more than just dark PC hardware. Whilst the new beige version of the PA401 isn't exactly white, the beige colour pallet certainly brings in a retro touch of styling whilst retaining an overall modern creative vibe.
The PA401 Beige shares all the same specifications as the black version of the chassis which is good news. Although, this will still come with compromises for GPU lengths and radiator suppport.
With those quirks aside, blend the beige PA401 wood edition with some Noctua hardware and the vibes are simply off the charts!
Final conclusion following build hardware list:
Main parts included in the build:
(USA Amazon)
Case (Beige): Coming Soon
Case (black wood): amzn.to/3GOBGPS
Case (black): amzn.to/3TPlb9w
CPU: amzn.to/4lHQXSa
GPU: not available
RAM: amzn.to/40XkAX2
MOBO: amzn.to/4luwWhE
PSU: amzn.to/40rLoPb
Cooler: amzn.to/40p89Do
Fan 140mm: amzn.to/4nYuFNh
Storage: amzn.to/3GAowWZ
Thermal Paste: amzn.to/44Ddycl
Keyboard: amzn.to/40p8eXI
Mouse: amzn.to/4eYGvTI
Mouse: amzn.to/4k0P9lA
Monitor: amzn.to/3T0wTOc
Espresso Machine: amzn.to/40f3SSH
Main parts included in the build:
(UK Amazon)
Case (beige): Coming Soon
Case (black wood): amzn.to/46WjEWC
CPU: amzn.to/46RWhO2
GPU: amzn.to/46BHAyL
RAM: amzn.to/44ULWOR
MOBO: amzn.to/450kIGE
PSU: amzn.to/44XaOWe
Cooler: amzn.to/4kO9BGu
Fan 140mm: amzn.to/3UiUZEf
Storage (alternative): amzn.to/4kQr9BU
Thermal Paste: amzn.to/3GVPWGN
Keyboard: not available
Mouse: amzn.to/3GRTVUO
Monitor: amzn.to/4kQ403v
Lamp: amzn.to/4jBUbWs
Espresso Machine: amzn.to/40lcTsK
As an Amazon Associate, I may earn from qualifying purchases.
As we continue to see a growing trend of wood themed PC cases, the PA401 hits different with that beige aesthetic. Whilst it's not going to be everybody's mood, I think with the right hardware theme this one has the potential to turn heads in all the right ways.
What's your thoughts on the new ProArt PA401 Beige Chassis? Let's chat in the comments!
---------------------------------------------------------------
Watch more comic shorts on the @MMLComics channel!
Subscribe to my 2nd Channel for more! @MrMattLeeV2
---------------------------------------------------------------
โโ BUY ME A COFFEE! โโ
Show you support for the channel. Bonus - get a shout out in the next video! No subscription or sign-up required!
buymeacoffee.com/MrMattLee
---------------------------------------------------------------
Please like and subscribe if you want to see more content like this, also follow the link below to my Instagram where you will find the photoshoot pictures and lots more like-minded content :D
----------------------------------------------------------------
Find me on socials:
instagram.com/mr_matt_lee
twitter.com/mr_matt_lee
facebook.com/MrMatthewLee
Timecodes, though I don't recommend skipping for visual narrative reasons! (Quality headphones or speakers recommended throughout)
00:00 - Introduction
00:53 - Get Yourself a... What?
01:30 - The Power Supply
02:32 - Planning Ahead is Key
03:09 - Zip Ties are the DEVIL
04:41 - Manage the Bulk, Last...
05:46 - Dealing with the Bulk
06:33 - The ARGB / PWM Nightmare
08:24 - Don't be an Artist
09:18 - Not All PC Systems are the same
10:26 - Extension Cables
11:18 - The Value of Taking Your Time
11:44 - Final Thoughts...
12:47 - Bonus MML Comic & Bloopers
The dreaded cable management. It's less of a stress than one should anticipate, but following a few extra steps will make the whole process easier and more manageable regardless of your skill level. In this video, we take a deeper dive into some of my own personal tips and tricks to help you with your next PC build adventure!
Also, this was the first time working with Montech's new HS01 Pro chassis. I have to be honest and say that it's one heck of a case for the price! With cable management in mind too, the dual chamber design lends it's self really well, even when using extensions. That included PWM and ARGB hub was a bonus to see too!
Links to some of my personal recommendations for tools, power supplies and more can be found below:
Recommended Products
(USA Amazon)
Slim Velcro Roll - amzn.to/4nMLJFR
Wide Velcro Roll - amzn.to/46bESj4
Scissors - amzn.to/44tyDWG
TUF Gaming 850w - amzn.to/3GNftBX
TUF Gaming 1000w - amzn.to/3Ix2pkF
Corsair SF850 - amzn.to/4ltsdwF
Black Cable Extension kit - amzn.to/3GIu7KN
White Cable Extension Kit - amzn.to/3TFsSil
Monochromatic Extension Kit - amzn.to/40VtV1w
Montech HS01 Case Featured - amzn.to/3IqPbG9
Screwdriver - amzn.to/3TCLQpZ
Thermalpaste - amzn.to/40Pao2M
Desk Mat for Building - amzn.to/3UahUS7
Recommended Products
(UK Amazon)
Slim Velcro Roll - amzn.to/4kBedQp
Wide Velcro Roll - amzn.to/44MSMGa
Scissors - amzn.to/4kBerqJ
TUF Gaming 850w - amzn.to/4kGeqSj
TUF Gaming 1000w - amzn.to/4kEZrbg
Corsair SF850 - amzn.to/3IrJ70a
Black Cable Extension kit - amzn.to/4lx8Xyq
White Cable Extension Kit - amzn.to/4nOcRVb
Monochromatic Extension Kit - amzn.to/4eRFIDR
Montech HS01 Case Featured - amzn.to/44wWepw
Screwdriver - amzn.to/44wmGj1
Thermalpaste - amzn.to/3GErdH2
Desk Mat for Building - amzn.to/4lRRYGC
As an Amazon Associate, I may earn from qualifying purchases.
---------------------------------------------------------------
Subscribe to @MMLComics for more fun PC DIY cartoon skits.
Subscribe to my 2nd Channel for more! @MrMattLeeV2
---------------------------------------------------------------
โโ BUY ME A COFFEE! โโ
Show you support for the channel. Bonus - get a shout out in the next video! No subscription or sign-up required!
buymeacoffee.com/MrMattLee
---------------------------------------------------------------
Please like and subscribe if you want to see more content like this, also follow the link below to my Instagram where you will find the photoshoot pictures and lots more like-minded content :D
----------------------------------------------------------------
Find me on socials:
instagram.com/mr_matt_lee
twitter.com/mr_matt_lee
facebook.com/MrMatthewLee
Timecodes, though I don't recommend skipping for visual narrative reasons! (Quality headphones or speakers recommended throughout)
00:00 - Coin Toss Decisions...
01:03 - PRIME AP202 Overview
02:04 - Motherboard Assembly
03:32 - PRIME AP202 Assembly
05:48 - Cable Master Levelled Up
07:22 - Build Resumes...
08:23 - Noise Levels
08:45 - Airflow Visualization
09:14 - Black AP202 Cinematic & Desk Setup
10:44 - White AP202 Cinematic
11:46 - Coffee, MML Comics + Outtakes
The ASUS PRIME AP202 shares very little in common with the PRIME AP201 we've grown so familiar with over the last few years. Instead, the AP202 takes a completely new approach, especially where airflow is concerned.
ASUS have patented the 'slot' intake along the bottom partition of the case. Initally, I assumed this wouldn't be very effective due to certain relative restrictions in the size and spacing but during testing I was wrong.
The slot provides ample airflow for a Micro ATX build whilst also keeping volume levels quiet. I'd love to see ASUS include two reverse fans for the side instead, I can't help but feel that temperatures would be even better with the side as exhaust for more high performance systems.
Final conclusion following build hardware list:
USA Amazon Links:
Black Build:
Case: Coming Soon!
CPU: amzn.to/4lBjMit
GPU: amzn.to/44NS78k
RAM (replacement): amzn.to/45Q26ex
Motherboard: amzn.to/44BPVjj
PSU: amzn.to/44y5ys0
Cooler: not available
Storage: amzn.to/3IaRqNK
Fans: amzn.to/45TAOE7
Thermal Paste: amzn.to/3Tr2PeG
White Build:
Case: Coming Soon!
CPU: amzn.to/3TqKkHj
GPU (alternative): amzn.to/4014StC
RAM: amzn.to/40wLnZZ
Motherboard: not available
PSU: amzn.to/40yd6tm
Cable Extensions: amzn.to/3Gr7f2h
Cooler: amzn.to/3I9JHPR
Storage: amzn.to/4lcVg7u
Desk Setup:
Keyboard: amzn.to/4nxMa6R
Mouse: amzn.to/3IaTgOG
Monitor: amzn.to/4ny7rxi
UK Amazon Links:
Black Build:
Case: Coming Soon!
CPU: amzn.to/4nDPmya
GPU: amzn.to/4kk0ygt
RAM (replacement): amzn.to/45Zo6nn
Motherboard: amzn.to/3TqPjrv
PSU: amzn.to/4ldO639
Cooler: amzn.to/4lgcTUb
Storage: amzn.to/4l6VDAB
Fans: amzn.to/3Tor3Gs
Thermal Paste: amzn.to/4nxoLCH
White Build:
Case: Coming Soon!
CPU: amzn.to/44fLeN5
GPU: amzn.to/40ydRTe
RAM: amzn.to/45UJslM
Motherboard: amzn.to/44vLDK9
PSU: amzn.to/44KeU50
Cable Extensions: amzn.to/3Idvx06
Cooler: amzn.to/3I766gZ
Storage: amzn.to/3IbiBYE
Desk Setup:
Keyboard: amzn.to/4lypce1
Mouse: amzn.to/45OSz7r
Monitor: amzn.to/4kigbEZ
As an Amazon Associate, I may earn from qualifying purchases.
The ASUS Prime AP202 is unique in its own rights. The curved glass isn't something new to the PC DIY space at this point, but the overall styling combined with the slotted bottom intake creates some unique visuals with great performance. It's worth noting that the black version of the case comes with very tinted glass, so be mindful of that when purchasing!
Could you see yourself with the new ASUS PRIME AP202? Let's chat in the comments!
---------------------------------------------------------------
Subscribe to MML Comics here! @MMLComics
youtube.com/@MMLComics
Subscribe to my 2nd Channel for Shorts and more! @MrMattLeeV2
---------------------------------------------------------------
โโ BUY ME A COFFEE! โโ
Show you support for the channel. Bonus - get a shout out in the next video! No subscription or sign-up required!
buymeacoffee.com/MrMattLee
---------------------------------------------------------------
Please like and subscribe if you want to see more content like this, also follow the link below to my Instagram where you will find the photoshoot pictures and lots more like-minded content :D
----------------------------------------------------------------
Find me on socials:
instagram.com/mr_matt_lee
twitter.com/mr_matt_lee
facebook.com/MrMatthewLee
Timecodes, though I don't recommend skipping for visual narrative reasons!
00:00 - Airflow Cases Explained
01:48 - TUF Gaming GT302 ARGB
02:54 - MML Comic Interlude (Sorry Sam)
03:22 - Fractal Design Meshify 3
04:32 - NZXT H3 Flow
05:48 - Lian Li Lancool 217
07:14 - Dan Cases A3
08:25 - ASUS ProArt PA401
09:38 - ASUS ProArt PA602
11:00 - TRYX Luca L70
12:11 - NZXT H9 Flow (2025)
13:30 - HAVN HS420
14:57 - To Summarise...
In this video I take a look back through some recent PC builds and talk about 10 stand out cases specifically with airflow in mind. Of course, there's so many which didn't make the list for no reason other than the video couldn't be three hours long! With that said, this selection is eclectic and offers a unique angle regardless of the PC build intentions.
For my final thoughts on this video, check out the paragraph below the following links:
(USA Amazon)
TUF Gaming GT302 ARGB - amzn.to/3GprGMW
Fractal Design Meshify 3 - amzn.to/3TjA1Vl
Fractal Design Meshify 3 XL - amzn.to/3GrhHGZ
NZXT H3 Flow - amzn.to/3I9eT1D
Lian Li Lancool 217 - amzn.to/3I53Fez
Dan Cases A3 - amzn.to/3Ge03Xf
Dan Cases A3 Wood - amzn.to/40xzgfc
ProArt PA401 - amzn.to/4ewwJrx
ProArt PA602 - amzn.to/4l7e1Jt
TRYX Luca L70 - amzn.to/40qsiJ2
NZXT H9 Flow - amzn.to/4erWFEG
HAVN HS420 - amzn.to/44sze9E
HAVN HS420 VGPU - amzn.to/3I2m4sJ
(UK Amazon)
TUF Gaming GT302 ARGB - amzn.to/44HMubO
Fractal Design Meshify 3 - amzn.to/3GqPWyb
Fractal Design Meshify 3 XL - amzn.to/44Hvq5Q
NZXT H3 Flow - amzn.to/3TPKYy9
Lian Li Lancool 217 - amzn.to/4kiM3cD
Dan Cases A3 - amzn.to/4ez23Ge
Dan Cases A3 Wood - amzn.to/3TRR4Ou
ProArt PA401 - amzn.to/4kBiV0B
ProArt PA602 - amzn.to/4kgMRig
TRYX Luca L70 - amzn.to/4lxKmZW
NZXT H9 Flow - amzn.to/3Gmh55v
HAVN HS420 - amzn.to/40tsYNK
HAVN HS420 VGPU - amzn.to/4l0m9eS
As an Amazon Associate, I may earn from qualifying purchases.
To wrap this up, airflow doesn't have to be complicated and most brand place a strong focus on airflow nowadays. Always keep in mind that, the more efficiently you can get air in and back out of the case, the cooler your system will be.
What PC Case are you using currently? Did any featured in this video surprise you? As always, let's chat in the comments!
---------------------------------------------------------------
Subscribe to @MMLComics for some animated PC DIY fun!
Subscribe to my 2nd Channel for more! @MrMattLeeV2
---------------------------------------------------------------
โโ BUY ME A COFFEE! โโ
Show you support for the channel. Bonus - get a shout out in the next video! No subscription or sign-up required!
buymeacoffee.com/MrMattLee
----------------------------------------------------------------
Find me on socials:
instagram.com/mr_matt_lee
twitter.com/mr_matt_lee
facebook.com/MrMatthewLee
twitter.com/mr_matt_lee
facebook.com/MrMatthewLee
--------------------------
Timecodes, though I don't recommend skipping for visual narrative reasons!
00:00 - A Thoughtful Intro
01:04 - Noctua 120mm G2 Overview
02:46 - Motherboard Assembly
04:09 - Noctua NH-D15 G2 Installation
04:51 - Corsair 4000D Assembly
07:13 - Sam, is that you?! (cable management)
08:18 - Upgrading The Noctua RTX 4080
09:20 - Finishing Touches
10:04 - Noise Levels
10:25 - Airflow Visualization
10:55 - Cinematic & Desk Setup
13:18 - Coffee Thanks & BONUS MML Comic
13:45 - Outtakes & Bloopers
If there's one thing we can count on Noctua for, it's their incredible approach to product design and the quiet technology which powers them. Noctua have been working away for years now to refine their second generation of fans and those years of efforts seem to have certainly paid off.
The NF-A12x25 G2 retains the colours we've grown so familar with from Noctua, but the fan blade shape and winglet design offers a unique and distinctive image for the G2's which also come with some excellent and welcomed performance upgrades too.
When testing, we were blown away at how quiet these fans truly are. Not only as case fans, but when pushing air thrrough radiators and heatsinks too.
Final conclusion following build hardware list:
Main parts included in the build:
(USA Amazon)
Fans 120mm: amzn.to/44k0s2e
Fans 120mm Twin - coming soon
Fans 140mm: amzn.to/4kZjDWf
Case: amzn.to/3T2MGMl
CPU: amzn.to/3ZEOP4A
GPU: not available
RAM: amzn.to/408UL5R
MOBO: amzn.to/4nbzv9D
PSU: amzn.to/3TySGwo
Cooler: amzn.to/4nbvulo
Storage: amzn.to/3T0sCu8
Thermal Paste: amzn.to/4lbPR03
Fan Hub: amzn.to/4kPu4f1
Keyboard: not available
Mouse: amzn.to/4k0P9lA
Monitor: amzn.to/3T0wTOc
Espresso Machine: amzn.to/40f3SSH
Main parts included in the build:
(UK Amazon)
Fans 120mm: Coming Soon
Fans 120mm Twin - amzn.to/4eF25wt
Fans 140mm: amzn.to/4ef24Pq
Case: amzn.to/44nArAe
CPU: amzn.to/4l7Kzmq
GPU: not available
RAM: amzn.to/43S5u7i
MOBO: amzn.to/4k9oIKA
PSU: amzn.to/3TvcG2W
Cooler: amzn.to/4ebRjNF
Storage: amzn.to/3Txah7X
Thermal Paste: amzn.to/3G7WQIB
Keyboard: not available
Mouse: amzn.to/4kXzFA8
Monitor: amzn.to/4kQ403v
Lamp: amzn.to/4jBUbWs
Espresso Machine: amzn.to/40lcTsK
Noctua continue to push the boundaries of what it means to create a quiet fan. Whilst the word 'silent' can be easily thrown around in this industry when talking about hardware operation, the G2's certainly comes as close to that as possible.
What's your thoughts on the new Noctua fans? Let's chat in the comments!
Special thanks to @NoctuaVideos for supporting this project.
Subscribe to the Mr Matt Lee Comics here:
@MMLComics
---------------------------------------------------------------
Subscribe to my 2nd Channel for more! @MrMattLeeV2
---------------------------------------------------------------
โโ BUY ME A COFFEE! โโ
Show you support for the channel. Bonus - get a shout out in the next video! No subscription or sign-up required!
buymeacoffee.com/MrMattLee
---------------------------------------------------------------
Please like and subscribe if you want to see more content like this, also follow the link below to my Instagram where you will find the photoshoot pictures and lots more like-minded content :D
----------------------------------------------------------------
Find me on socials:
instagram.com/mr_matt_lee
twitter.com/mr_matt_lee
facebook.com/MrMatthewLee
Timecodes, though I don't recommend skipping for visual narrative reasons! (Quality headphones or speakers recommended throughout)
00:00 - Intro: From Small To Big
00:44 - An SMS from NZXT
01:30 - NZXT H9 Flow Overview
02:27 - Motherboard Assembly
04:08 - NZXT H9 Flow Assembly
05:36 - We All Need a Sam (cable time)
07:09 - In Goes The GPU
08:17 - Noise Levels
08:38 - Airflow Visualization
09:00 - Cinematic & Desk Setup
11:16 - BONUS SCENES (+ MML COMICS)
The new version of the H9 Flow not only aligns the design language with NZXT's current lineup (H3, H5 and H7) it brings more character and not to forget how the RGB+ version comes with two 420mm RGB Core fan bars and a single 120mm rear exhaust.
The combination of having a three 140mm front-side intake fans, three 140mm bottom intake and a 120mm rear exhaust makes this case one heck of a cooling machine for both liquid and air cooled builds.
The build process couldn't be easier due to the fan bars being pre-installed. With that being said, the rest of the case assembly was effortless too. This is great news for new PC builders and seasoned pro's alike.
Final conclusion following build hardware list:
USA Amazon Links:
Case: amzn.to/4ebZbyY
CPU: amzn.to/3HUdjk2
GPU: amzn.to/4ecCOt5
RAM: amzn.to/3HCxbYT
MOBO: amzn.to/3HGMgc7
PSU: amzn.to/3HHPxb5
Cooler: amzn.to/4423yYL
Storage: amzn.to/3G3tomW
Thermal Paste: amzn.to/3Tm6OJg
Keyboard: amzn.to/4kV7Sj0
Mouse: amzn.to/4jGcrNm
Mic: amzn.to/4e59qVx
Monitor: amzn.to/3SIfIkg
Speakers: amzn.to/45uSbdZ
Espresso Machine: amzn.to/4apOwOY
UK Amazon Links:
Case: amzn.to/45XYPtx
CPU: amzn.to/45i356W
GPU: amzn.to/3FZ2AV1
RAM: amzn.to/4l9I96T
MOBO: amzn.to/3SSVX9M
PSU: amzn.to/3SRuSUs
Cooler: amzn.to/3HUsf1C
Storage: amzn.to/4jMeWh1
Thermal Paste: amzn.to/4kXaX23
Keyboard: amzn.to/4dUV1uV
Mouse: amzn.to/4jFVDpu
Mic: amzn.to/45M7v63
Monitor: amzn.to/4dBDdoC
Lamp: amzn.to/4jBUbWs
Espresso Machine: amzn.to/40lcTsK
As an Amazon Associate, I may earn from qualifying purchases.
The NZXT H9 Flow RGB+ is without a doubt one of my favourite large cases for cooling and airflow right now in 2025. No complications, no size restrictions... Just build your dream rig and theme away!
As always NZXT have done an excellent job with the H9 refresh and I'm stoked to see how builders get to grips with this one through the coming months.
Could you see yourself with the new NZXT H9 Flow? Let's chat in the comments!
Special thanks to @NZXTglobal โfor supporting this project.
---------------------------------------------------------------
Subscribe to MML Comics here! @MMLComics
youtube.com/@MMLComics
Subscribe to my 2nd Channel for Shorts and more! @MrMattLeeV2
---------------------------------------------------------------
โโ BUY ME A COFFEE! โโ
Show you support for the channel. Bonus - get a shout out in the next video! No subscription or sign-up required!
buymeacoffee.com/MrMattLee
---------------------------------------------------------------
Please like and subscribe if you want to see more content like this, also follow the link below to my Instagram where you will find the photoshoot pictures and lots more like-minded content :D
----------------------------------------------------------------
Find me on socials:
instagram.com/mr_matt_lee
twitter.com/mr_matt_lee
facebook.com/MrMatthewLee
NZXT H3 Flow: Micro ATX is Back (and Better)
Timecodes, though I don't recommend skipping for visual narrative reasons! (Quality headphones or speakers recommended throughout)
00:00 - A Hecking Delivery Arrives
00:48 - Radeon RX 9060 XT Enters the Chat
01:27 - NZXT H3 Flow Overview
02:16 - Motherboard Assembly
04:27 - NZXT H3 Flow Assembly
06:05 - The Cable Guy Does His Thing
07:05 - This is the RX 9060 XT (not 9070)
07:49 - Noise Levels
08:10 - Airflow Visualization
08:28 - Cinematic & Desk Setup
10:39 - Coffee Thanks & Bloopers
It goes without saying that the H3 Chassis from NZXT has been long anticipated. Retaining the design language found on the much larger H7 and H5, the H3 brings it's own style with smaller dimensions but with plenty of airflow for modern systems.
It's unusual to find PSU shrouds with usable airflow for mounting fans below the GPU, but NZXT have executed this well, setting back the PSU further towards the sides. Sure, the short coming could be the radiator compatibility (240mm on top, 280mm on the front) but if you utilise the airflow options available it's unlikely you'll encounter any thermal issues.
The Radeon RX 9060 XT only just arrived with us on the day of filming, so unfortunately we don't have any testing data for this just yet. We are stoked to see the PRIME design language remains unchanged, this is a big win for excellent cooling thanks to the three fan design and not to mention how slim it is for smaller builds too!
Final conclusion following build hardware list:
USA Amazon Links:
Case: amzn.to/4dUTZix
CPU: amzn.to/4dY9TZJ
GPU: Coming Soon
RAM: amzn.to/45M5WFe
MOBO: amzn.to/4dZnvE2
PSU: amzn.to/43CUgDq
Cooler: amzn.to/45M6c7a
Fans: amzn.to/4jJjdSm
Storage: amzn.to/3SHQe6s
Thermal Paste: amzn.to/3FxlH8B
Keyboard: amzn.to/4kV7Sj0
Mouse: amzn.to/4jGcrNm
Mic: amzn.to/45aXFKV
Monitor: amzn.to/3SIfIkg
Speakers: amzn.to/45uSbdZ
Espresso Machine: amzn.to/4apOwOY
UK Amazon Links:
Case: amzn.to/4mRYlv2
CPU: amzn.to/3HwuDvv
GPU: Coming Soon
RAM: amzn.to/3Th5hEm
MOBO: amzn.to/4jKFSOl
PSU: amzn.to/3Fxm8jf
Cooler: amzn.to/3HzKWb2
Fans: amzn.to/4e0Gyhq
Storage: amzn.to/3FQnkOF
Thermal Paste: amzn.to/4kXaX23
Keyboard: amzn.to/4dUV1uV
Mouse: amzn.to/4jFVDpu
Mic: amzn.to/45M7v63
Monitor: amzn.to/4dBDdoC
Speakers: amzn.to/43JnkrN
Lamp: amzn.to/4jBUbWs
Espresso Machine: amzn.to/40lcTsK
As an Amazon Associate, I may earn from qualifying purchases.
The NZXT H3 Flow easily fills a sweet spot for those seeking a more affordable build with plenty of cooling options. GPU support is excellent with plenty of space to accomodate the larger 5000 series too. There's a lot to love here.
Could you see yourself with the new NZXT H3 Flow? Let's chat in the comments!
Special thanks to @NZXTglobal โfor supporting this project.
---------------------------------------------------------------
Subscribe to my 2nd Channel for more! @MrMattLeeV2
---------------------------------------------------------------
โโ BUY ME A COFFEE! โโ
Show you support for the channel. Bonus - get a shout out in the next video! No subscription or sign-up required!
buymeacoffee.com/MrMattLee
---------------------------------------------------------------
Please like and subscribe if you want to see more content like this, also follow the link below to my Instagram where you will find the photoshoot pictures and lots more like-minded content :D
----------------------------------------------------------------
Find me on socials:
instagram.com/mr_matt_lee
twitter.com/mr_matt_lee
facebook.com/MrMatthewLee
Timecodes, though I don't recommend skipping for visual narrative reasons! (Quality headphones or speakers recommended throughout)
00:00 - Introduction
01:24 - HydroShift II Overview
02:19 - SL Infinity Wireless Overview
02:52 - Motherboard Assembly
04:48 - O11 EVO Assembly
07:46 - The Cable Master Arrives
08:23 - Build Resumes
09:29 - Noise Levels
09:52 - Airflow Visualization
10:12 - Cinematic & Desk Setup
12:07 - Coffee Thanks & Bloopers
When the original Hydroshift from Lian Li dropped last year we were blown away by the hidden tubes and tech innovations. It came with a few caveats, however... One of which being the compatibility of the cooler and rigidity of the tubes. These issues have been ironed out with the second generation, bringing a far more appealing option for a clean PC aesthetic.
With 'offline' mode, you're able to rotate the bezel to switch LCD display modes and RGB lighting. This is a welcomed addition, especially for those trying to retain a minimalist system without extra software.
Lian Li have also finally launched their brand new SL-INF fans and they are our favourites so far. Sure, the wireless feature is one the headlines here, but those new 3 zone lights look brilliant, offering a new perspective and design language within builds.
Final conclusion following build hardware list:
USA Amazon Links:
Case: amzn.to/43ETm8n
CPU: amzn.to/43BQtVP
GPU: amzn.to/4kjlSn7
RAM: amzn.to/3SshgyI
MOBO: amzn.to/4jtcXhI
PSU: amzn.to/3ZGXJhI
Cooler (Uni Fan CL): amzn.to/3ZFHLEF
Fans: Coming Soon
Fans (alternative): amzn.to/4kpG8DB
Storage: amzn.to/3SXP9r9
Thermal Paste: amzn.to/43vVkJr
Keyboard: amzn.to/3ZIhXrx
Mouse: amzn.to/4kL2lf6
Monitor: amzn.to/3HvOOcM
Speakers: amzn.to/45uSbdZ
Espresso Machine: amzn.to/4apOwOY
UK Amazon Links:
Case: amzn.to/4ksDD3h
CPU: amzn.to/3ZF7Kfm
GPU: amzn.to/451ICmO
RAM: amzn.to/3ZaHd9D
MOBO: amzn.to/4mF8T0y
PSU: amzn.to/3HfZNqI
Cooler: Coming Soon
Fans: Coming Soon
Fans (alternative): amzn.to/3SvtK8E
Storage (alternative): amzn.to/3Fg4WP9
Thermal Paste: amzn.to/4jtdLmu
Keyboard: amzn.to/4mEka0U
Mouse: amzn.to/3SvmGsJ
Monitor: amzn.to/4dBDdoC
Speakers: amzn.to/43JnkrN
Lamp: amzn.to/4jBUbWs
Espresso Machine: amzn.to/40lcTsK
As an Amazon Associate, I may earn from qualifying purchases.
If there's one thing we can count on Lian Li for, it's their ability to push new innovations whilst fulfilling the needs of the PC DIY Community. The New Hydroshift II is a very appealing option, with or without fans.
Read our full writeup here:
mrmattlee.com/post/hydroshift2
Could you see yourself with the new Hydroshift II or SL Infinity Fans? Let's chat in the comments!
Special thanks to โโ @LIANLIHQ for supporting this project.
---------------------------------------------------------------
Subscribe to my 2nd Channel for more! @MrMattLeeV2
---------------------------------------------------------------
โโ BUY ME A COFFEE! โโ
Show you support for the channel. Bonus - get a shout out in the next video! No subscription or sign-up required!
buymeacoffee.com/MrMattLee
---------------------------------------------------------------
Please like and subscribe if you want to see more content like this, also follow the link below to my Instagram where you will find the photoshoot pictures and lots more like-minded content :D
----------------------------------------------------------------
Find me on socials:
instagram.com/mr_matt_lee
twitter.com/mr_matt_lee
facebook.com/MrMatthewLee
Timecodes, though I don't recommend skipping for visual narrative reasons! (Quality headphones or speakers recommended throughout)
00:00 - Sam Gets a DM
01:06 - Fractal North Overview
01:46 - Build Hardware
02:20 - Motherboard Assembly
04:08 - Fractal North Assembly
07:25 - Noise Levels
07:52 - Airflow Visualization
08:15 - Cinematic & Desk Setup
Whilst Matt was away, Sam was tasked with the creative process of filming and building a PC for the channel, something he's never tried before. We never planned for this video to be live on the channel, but Sams efforts were so good it only felt right to share it with you guys. Please do give him a high five in the comments :D
The Fractal Design North remains one of the more mature focussed cases almost three years after its launch. For this one Sam wanted to embrace the thick Arctic Freezer III 240 combined with a Core Ultra 7 and RTX 5080 combination. This pushed the North for a solid gamer and creator focussed system which will be ideal for recoding music and editing content.
Final conclusion following build hardware list:
USA Amazon Links:
Case: amzn.to/3SObSWG
CPU: amzn.to/3YXEeBn
GPU: amzn.to/4mCO06f
RAM: amzn.to/3SP1MVt
MOBO: amzn.to/43avBpA
PSU: amzn.to/3H8mYU1
Cooler: amzn.to/4msLHlU
Fans: amzn.to/4jfdaVp
Storage: amzn.to/3SRk7Bi
Thermal Paste: amzn.to/44TD91c
Keyboard: amzn.to/4jifo6m
Mouse: amzn.to/3HbP2Wv
Bass Guitar: amzn.to/4mNwxYX
Mouse: amzn.to/4kmrWuy
Monitor: amzn.to/3EY2IDB
Espresso Machine: amzn.to/4apOwOY
UK Amazon Links:
Case: amzn.to/4mv7nhp
CPU: amzn.to/43tJ7Dt
GPU: amzn.to/4jBw2yl
RAM: amzn.to/4kxFp2L
MOBO: amzn.to/44UwdB6
PSU: amzn.to/43DAOW6
Cooler: amzn.to/4kwKsjV
Fans: amzn.to/4kD8k5F
Storage: amzn.to/4k9hKWu
Thermal Paste: amzn.to/3YZBL9C
Keyboard: not available
Mouse: amzn.to/4k4I7gg
Monitor: amzn.to/3Z0Ntk9
Lamp: amzn.to/4jBUbWs
Espresso Machine: amzn.to/40lcTsK
As an Amazon Associate, I may earn from qualifying purchases.
With Computex 2025 just passing, I was hopeful that we might see a new version of North for later in the year, perhaps even a smaller Micro ATX addition... That doesn't seem to be the case. With that said, the current North still holds its own and I'm very excited to see so much new hardware working so well within!
Have you built with the North in 2024? What do you think of Sams build? Let's chat in the comments
Read our full writeup here:
mrmattlee.com/post/meshify3
---------------------------------------------------------------
Subscribe to my 2nd Channel for more! @MrMattLeeV2
---------------------------------------------------------------
โโ BUY ME A COFFEE! โโ
Show you support for the channel. Bonus - get a shout out in the next video! No subscription or sign-up required!
buymeacoffee.com/MrMattLee
---------------------------------------------------------------
Please like and subscribe if you want to see more content like this, also follow the link below to my Instagram where you will find the photoshoot pictures and lots more like-minded content :D
----------------------------------------------------------------
Find me on socials:
instagram.com/mr_matt_lee
twitter.com/mr_matt_lee
facebook.com/MrMatthewLee
Timecodes, though I don't recommend skipping for visual narrative reasons! (Quality headphones or speakers recommended throughout)
00:00 - From Delay to Present Day
02:42 - Meshify 3 Overview
03:36 - Build Hardware
04:06 - Motherboard Assembly
05:35 - Meshify 3 Assembly
07:18 - Sam Brings the Good Stuff
08:07 - Build Resumes
08:59 - Noise Levels
09:22 - Airflow Visualization
09:43 - Cinematic & Desk Setup
11:30 - Coffee Thanks & Bloopers
The Meshify series from Fractal Design have stood the test of time for being some of the best performance PC cases currently available on the market. The Meshify 3 is their latest iteration, brining some interesting new quirks and features to the table, including software-less configuration control.
The Ambience Pro version of the Meshify 3 utilises the 'Adjust Pro Hub' to allow ARGB and fan control without the need for software. You simply access it online through FD's hub and make the relative changes. This is great news for those seeking to keep their PC's free of software and bloatware.
As for airflow performance, this is incredible as to be expected. Fractals new Momentum fans move loads of air whilst also having the direction assisted by the airflow ramp at the base of the case. This keeps your GPU exceptionally cool with very low noise too.
Final conclusion following build hardware list:
USA Amazon Links:
Case: Coming Soon
CPU: amzn.to/4mr3ASnย
GPU: amzn.to/3FaYtVvย
RAM: amzn.to/4dhGgSIย
MOBO: amzn.to/3GS8wiTย
PSU: amzn.to/3EW3qS9ย
Cooler: amzn.to/3GVdlYwย
Storage: amzn.to/3S4lOLvย
Rear Fan Recommend: amzn.to/45dgrBi
Thermal Paste: amzn.to/4dEGJyNย
Speakers: amzn.to/4mniEA6
Mouse: amzn.to/4kmrWuyย
Monitor: amzn.to/3EY2IDBย
Espresso Machine: amzn.to/4apOwOYย
UK Amazon Links:
Case: Coming Soon
CPU: amzn.to/4jV60qtย
GPU: amzn.to/44Hlgmbย
RAM: amzn.to/3FlorWeย
MOBO: amzn.to/3S3xBcWย
PSU: amzn.to/4kmrcFGย
Rear Fan Recommend: amzn.to/44INFbv
Cooler: amzn.to/43kDmYWย
Storage: amzn.to/4doGyr5ย
Thermal Paste: amzn.to/4j8kqTcย
Speakers: amzn.to/3FmTqRP
Mouse: amzn.to/4kmklMnย
Monitor: amzn.to/3Z0Ntk9ย
Lamp: amzn.to/4jBUbWsย
Espresso Machine: amzn.to/40lcTsK
As an Amazon Associate, I may earn from qualifying purchases.
Fractal Design continue to refresh their designs rather than replace them entirely, this is always something we love to see in the PC DIY community. As with all Fractal Design products, the Meshify 3 oozes quality, style and performance, all wrapped up into a very appealing bundle!
Read our full writeup here:
mrmattlee.com/post/meshify3
Could you see yourself with the new Meshify 3? Let's chat in the comments!
---------------------------------------------------------------
Subscribe to my 2nd Channel for more! @MrMattLeeV2
---------------------------------------------------------------
โโ BUY ME A COFFEE! โโ
Show you support for the channel. Bonus - get a shout out in the next video! No subscription or sign-up required!
buymeacoffee.com/MrMattLee
---------------------------------------------------------------
Please like and subscribe if you want to see more content like this, also follow the link below to my Instagram where you will find the photoshoot pictures and lots more like-minded content :D
----------------------------------------------------------------
Find me on socials:
instagram.com/mr_matt_lee
twitter.com/mr_matt_lee
facebook.com/MrMatthewLee
Timecodes, though I don't recommend skipping for visual narrative reasons!
00:00 - Imagine This...
00:39 - Honey I Shrunk The PA602
01:12 - PA401 Wood Edition Overview
02:31 - Build Hardware
02:56 - Kingston Gen 5 Arrives
03:15 - Motherboard Assembly
05:07 - PA401 Assembly
06:39 - The Cable Master Returns
07:11 - Build Continues
07:52 - Noise Levels
08:21 - Airflow Visualization
08:45 - Cinematic & Desk Setup
11:01 - Coffee Thanks & Bloopers
It goes without saying that the ProArt PA602 has been a very popular case for both gamers and creators alike. If there's one thing we've been craving, however, it's a smaller version for those who have less space or less demand... Enter the PA401.
Elegant and stylish, those are my two keywords here. The PA401 Wood Edition offers some very warm angles and the subdued wood grain is tasteful whilst not overpowering. ASUS opted to use Ash wood for the front panel which was an interesting but welcomed choice, in a space where others have gravitated more towards Walnut and Pine.
Whilst GPU lengths are going to be a big contributing factor with your decision to purchase the PA401, assuming you stay within those limitations this chassis has some incredible cooling potential whilst also being quite minimalistic.
Final conclusion following build hardware list:
Main parts included in the build:
(USA Amazon)
Case (wood): amzn.to/3GOBGPS
CPU: amzn.to/4k6qNXQ
GPU: amzn.to/3YGpcjn
RAM: amzn.to/4kc8y3c
MOBO: amzn.to/3SsoXVs
PSU: amzn.to/43akviW
Cooler: amzn.to/4j2nf8f
Storage: amzn.to/3GQed0x
Thermal Paste: amzn.to/4535QIY
Keyboard: amzn.to/4dfiPcP
Keycaps: not available
Mouse: amzn.to/44s7L9T
Monitor: amzn.to/3EY2IDB
Espresso Machine: amzn.to/4apOwOY
Main parts included in the build:
(UK Amazon)
Case (wood): amzn.to/3EOql1D
CPU: amzn.to/43akZFM
GPU: amzn.to/3Za6Qaw
RAM: amzn.to/3ZeREsH
MOBO: amzn.to/4m8C1wH
PSU: amzn.to/3F2P9Tu
Cooler: amzn.to/44s80Sl
Storage: amzn.to/4iY3MFF
Thermal Paste: amzn.to/3GPx4sC
Keyboard: amzn.to/3GN20d8
Keycaps: not available
Mouse: amzn.to/4iTHF36
Monitor: amzn.to/3Z0Ntk9
Lamp: amzn.to/4jBUbWs
Espresso Machine: amzn.to/40lcTsK
As an Amazon Associate, I may earn from qualifying purchases.
Wood panels on PC cases are becoming more and more normal into 2025, that's something I never thought I'd say a few years ago! ASUS have done a very good job of implementing the wood accents into the PA401, bridging the gap for creators and gamers alike to embrace a stylish and more 'mature' focussed setup.
PA602 Wood Edition too large? Well, the PA401 has you covered.
What's your thoughts on the new ProArt Chassis? Let's chat in the comments!
Read the complete build writeup here:
mrmattlee.com/post/proartpa401
---------------------------------------------------------------
Subscribe to my 2nd Channel for more! @MrMattLeeV2
---------------------------------------------------------------
โโ BUY ME A COFFEE! โโ
Show you support for the channel. Bonus - get a shout out in the next video! No subscription or sign-up required!
buymeacoffee.com/MrMattLee
---------------------------------------------------------------
Please like and subscribe if you want to see more content like this, also follow the link below to my Instagram where you will find the photoshoot pictures and lots more like-minded content :D
----------------------------------------------------------------
Find me on socials:
instagram.com/mr_matt_lee
twitter.com/mr_matt_lee
facebook.com/MrMatthewLee
Timecodes, though I don't recommend skipping for visual narrative reasons! (Quality headphones or speakers recommended throughout)
00:00 - Intro / Throwback
00:38 - A Lancool 217 Appears
01:33 - Lancool 217 Overview
03:11 - Build Hardware
03:44 - Motherboard Assembly
05:00 - Lancool 217 Assembly
06:34 - The Cable Master Returns
07:20 - In Goes The GPU
08:17 - Noise Levels
08:38 - Airflow Visualization
09:06 - Cinematics & Desk Setup
11:49 - Coffee Thanks & Bloopers
Alongside popular cases such as the O11 Dynamic, Lian Li have been making some incredible airflow focussed cases over the last few years. The Lancool 217 hits in the same way that the Lancool III did back in 2022. Loads of airflow, intuitive and unique internal designs with a very 'Lian Li' overall style.
The Lancool 217's strength comes with those two huge 170mm x 30mm front intake fans. When paired up with the also included two 120mm reversed bottom and single 140mm exhaust fan, there are few other cases at this price point which can beat this in terms of raw airflow and cooling performance.
The wood accents Lian Li opted to use with the Lancool 217 feels a little underwhelming. Not because the wood is poor quality, more the uniformity of it. I would've loved to see the wood accents somehow implemented across the bottom section of the case to bring more symmetry. However, when the RGB inside is themed orange this becomes less of a problem.
Final conclusion following build hardware list:
USA Amazon Links:
Case: Coming Soon
CPU: amzn.to/4jKbdBE
GPU: amzn.to/4lQ9SdM
RAM: amzn.to/42H6KJS
MOBO: amzn.to/3EPX7PP
PSU: amzn.to/4d09VQd
Cooler: amzn.to/4304SL0
Storage: amzn.to/4d0EGEP
Thermal Paste: amzn.to/3GA3kQk
Keyboard: amzn.to/3GDQrES
Keycaps: amzn.to/4lWL18l
Mouse: amzn.to/4k6xVUm
Monitor: amzn.to/3EY2IDB
Espresso Machine: amzn.to/4apOwOY
UK Amazon Links:
Case: not available
Case (alternative): amzn.to/4ahHgVE
CPU: amzn.to/42aSFV5
GPU: amzn.to/4jdmQRx
RAM: amzn.to/4j8tJnd
MOBO: amzn.to/4267xnL
PSU: Coming Soon
24pin Strimer - amzn.to/3WiBJIt
12VHPWR Strimer - amzn.to/4jeO4Ht
Cooler: amzn.to/3C6cjqM
Thermal Paste: amzn.to/4afWcU4
Thermal Paste Guard: amzn.to/3CiAD8G
Storage: amzn.to/409gREJ
Fans (alternative): amzn.to/3E3h1pyย ย
Keyboard: amzn.to/4mfVJHc
Keycaps: amzn.to/3Yv4J0Q
Mouse: amzn.to/4j51LJ7
Monitor: amzn.to/4778eh2
As an Amazon Associate, I may earn from qualifying purchases.
If there's one thing we can count on Lian Li for, it's their ability to push new innovations whilst fulfilling the needs of the PC DIY Community. With wood and airflow in mind, the Lancool 217 ticks all the right boxes for those seeking only the highest cooling performance with solid build construction too.
Read our full writeup here:
mrmattlee.com/post/lancool217
Could you see yourself with the new Lancool 217? Will you be taking the light or dark version of the chassis? Let's chat in the comments!
Special thanks to โโ @LIANLIHQ for supporting this project.
---------------------------------------------------------------
Subscribe to my 2nd Channel for more! @MrMattLeeV2
---------------------------------------------------------------
โโ BUY ME A COFFEE! โโ
Show you support for the channel. Bonus - get a shout out in the next video! No subscription or sign-up required!
buymeacoffee.com/MrMattLee
---------------------------------------------------------------
Please like and subscribe if you want to see more content like this, also follow the link below to my Instagram where you will find the photoshoot pictures and lots more like-minded content :D
----------------------------------------------------------------
Find me on socials:
instagram.com/mr_matt_lee
twitter.com/mr_matt_lee
facebook.com/MrMatthewLee
Timecodes, though I don't recommend skipping for visual narrative reasons! (Quality headphones or speakers recommended throughout)
00:00 - Matt Returns, With Toys...
01:29 - Lancool 207 Digital Overview
02:26 - Build Hardware
02:58 - Motherboard Assembly
04:10 - Lancool 207 Digital Assembly
05:43 - I Summoned the Cable Master
06:18 - Build Resumes
07:16 - Airflow Visualization
07:46 - Cinematics & Desk Setup
09:59 - Coffee Thanks & Outtakes
If there's one thing we can count on Lian Li for, it's their constant ability to breathe new life into old cases, whilst also bringing something interesting to the table. That's exactly what we see here with the 207 Digital.
Thankfully, the $79 Lancool 207 and the new Digital variation both retain exactly the same cooling support, meaning those without the need for an LCD screen can opt for the cheaper version, whilst this one being just $30 more, brings customisation and plethora of options for enthusiasts and PC DIYers alike.
I have to be honest and say the Lancool 207 Digital is a lot of PC case for the money. Not only are you getting a very well made chassis, but the included two 140mm front intake fans and two 120mm bottom intake fans perform very well indeed, making the whole package almost untouchable at the price vs quality.
Final conclusion following build hardware list:
USA Amazon Links:
Case: amzn.to/3WiHS7t
CPU: amzn.to/3WhrxQn
GPU: amzn.to/4aeZU0e
GPU (alternative): amzn.to/40tilLd
RAM: not available
MOBO: amzn.to/4jg32x5
PSU: Coming Soon
PSU (alternative): amzn.to/40eKrZy
24pin Strimer - amzn.to/3WiBJIt
12VHPWR Strimer - amzn.to/4jeO4Ht
Cooler: amzn.to/4fOGAbm
Thermal Paste: amzn.to/4gW8O5u
Thermal Paste Guard: amzn.to/4afVFl2
Storage: amzn.to/4hcu9Hi
Fans: amzn.to/4aeNgyj
Keyboard: amzn.to/3WiIry7
Mouse: amzn.to/3WhOzqy
Monitor: amzn.to/4e7IIu7
UK Amazon Links:
Case: not available
Case (alternative): amzn.to/4ahHgVE
CPU: amzn.to/42aSFV5
GPU: amzn.to/4jdmQRx
RAM: amzn.to/4j8tJnd
MOBO: amzn.to/4267xnL
PSU: Coming Soon
24pin Strimer - amzn.to/3WiBJIt
12VHPWR Strimer - amzn.to/4jeO4Ht
Cooler: amzn.to/3C6cjqM
Thermal Paste: amzn.to/4afWcU4
Thermal Paste Guard: amzn.to/3CiAD8G
Storage: amzn.to/409gREJ
Fans (alternative): amzn.to/3E3h1pyย ย
Keyboard (alternative): amzn.to/3C76nh8ย ย
Mouse: amzn.to/4j51LJ7
Monitor: amzn.to/4778eh2
As an Amazon Associate, I may earn from qualifying purchases.
Lian Li seem to be constantly pushing the boundaries of innovation in the PC DIY space and it's commendable. Not only do their products fulfil the needs of many, the quality and attention to detail always shines through.
The Lancool 207 Digital certainly hits the spot for those seeking more personalisation, or simply to monitor PC temps and statistics. There's a lot to love here!
Read our full writeup here:
mrmattlee.com/post/lancool207digital
Could you see yourself with the new Lancool 207 Digital? do you already have the non digital version? Let's chat in the comments!
Special thanks to โโ @LIANLIHQ for supporting this project.
---------------------------------------------------------------
Subscribe to my 2nd Channel for more! @MrMattLeeV2
---------------------------------------------------------------
โโ BUY ME A COFFEE! โโ
Show you support for the channel. Bonus - get a shout out in the next video! No subscription or sign-up required!
buymeacoffee.com/MrMattLee
---------------------------------------------------------------
Please like and subscribe if you want to see more content like this, also follow the link below to my Instagram where you will find the photoshoot pictures and lots more like-minded content :D
----------------------------------------------------------------
Find me on socials:
instagram.com/mr_matt_lee
twitter.com/mr_matt_lee
facebook.com/MrMatthewLee
Timecodes, though I don't recommend skipping for visual narrative reasons!
00:00 - Introducing Sam!
01:49 - ROG Swift PG27AQDP Unboxing
03:32 - Those Peels...
04:10 - First Look Overview
05:00 - Setting up the desk
05:47 - Forza Horizon 5
06:05 - Spiderman Remastered
06:22 - Cyberpunk 2077
06:30 - Ori & The Blind Forest
06:40 - Marvel Rivals
06:53 - Monitor Cinematics
07:49 - Sams Outro
Can we just take a moment to appreciate Sams work with this video? Considering he's never filmed or produced a YouTube video before, this was an outstanding first attempt and I honestly tip my hat to him. Very well done and I'm stoked to give him a formal introduction to the channel finally.
Please give him a warm welcome in the comments!
As for the ROG Swift PG27AQDP, a 1440p 480Hz Oled monitor... Say no more! This thing is absolutely stunning both cosmetically and from a performance perspective. As we all know, 1440p is the sweet spot for most gamers and seeing that high refresh rate to compliment the resolution makes for one heck of a gaming experience, don't you agree?
Main parts included in the build to power the monitor during this video:
(USA Amazon)
Monitor: amzn.to/3RuMip7
Case: amzn.to/3Xp3QXc
CPU: amzn.to/3FclM0C
GPU: Coming Soon
RAM (alternative): amzn.to/4h5RXMJ
MOBO: amzn.to/4ioaa98
PSU: amzn.to/4krmTKj
Cooler (alternative): amzn.to/3D1myx6
Storage: amzn.to/4kjRUj9
Cable Extensions: amzn.to/4ipXgrr
Gen 5 Riser Cable: amzn.to/4blsRYV
Thermal Paste: amzn.to/3QJ06f6
Keyboard: amzn.to/3QH0Dyo
Mouse: amzn.to/43gY4KH
(UK Amazon)
Monitor: amzn.to/42JNUR6
Case: amzn.to/3QGPYnb
CPU: amzn.to/4h9CZVQ
GPU: Coming Soon
RAM (alternative): amzn.to/3XpasEQ
MOBO: amzn.to/41Fb4ZF
PSU: amzn.to/4idXX7e
Cooler: amzn.to/4i2yxcN
Storage: amzn.to/4br4MzK
Cable Extensions: amzn.to/4bqqqED
Gen 5 Roser Cable: amzn.to/3F3RkWI
Thermal Paste: amzn.to/4i00Pof
Keyboard: amzn.to/41qFkG2
Mouse: amzn.to/41qFNIv
As an Amazon Associate, I may earn from qualifying purchases.
What's your thoughts on this 1440p 480Hz panel from ASUS ROG? Let me know in the comments!
Special thanks to Sam for taking the reins and making this video happen. What an absolute legend :D
---------------------------------------------------------------
โโ BUY ME A COFFEE! โโ
Show you support for the channel. Bonus - get a shout out in the next video! No subscription or sign-up required!
buymeacoffee.com/MrMattLee
---------------------------------------------------------------
Please like and subscribe if you want to see more content like this, also follow the link below to my Instagram where you will find the photoshoot pictures and lots more like-minded content :D
----------------------------------------------------------------
Find me on socials:
instagram.com/mr_matt_lee
twitter.com/mr_matt_lee
facebook.com/MrMatthewLee
Timecodes, though I don't recommend skipping for visual narrative reasons!
00:00 - Introverview (Intro + Case Overview)
02:12 - Motherboard Assembly
05:53 - TR100 Assembly
08:09 - Airflow Visualization & Noise Levels
08:52 - Cinematic & Desk Setup
10:28 - Coffee Thanks & Outtakes
From the small cases such as the Tower 200 and 300 series, to the new TR100, Thermaltake have been pushing innovation hard for the last year and it clearly shows. Taking into consideration modern graphics card sizes, the TR100's make easy work of handling larger GPU's whilst also accommodating up to 280mm radiators up top.
Those seeking loads of cooling may be a little disappointed here though, whilst the TR100 is more than capable of drawing in lots of air through the perforated panels, theres no room to install any kind of forced cold air intake. This might be problematic for some, but assuming you build within the thermal parameters of this case, it's a pure delight for sure!
Final conclusion following build hardware list:
Main parts included in the build:
(USA Amazon)
Case: amzn.to/4j2ybDn
CPU: amzn.to/44ssv10
GPU: not available
RAM: amzn.to/4j8cMZM
MOBO: amzn.to/4i927N2
PSU: amzn.to/3RetQkr
Cooler (alternative): amzn.to/3EcicDP
Storage: amzn.to/3XUQjqw
Thermal Paste: amzn.to/42lY4qJ
Keyboard: amzn.to/4i9gFfL
Mouse: amzn.to/42rSGlQ
Monitor: amzn.to/4hrs5vP
Espresso Machine: amzn.to/4apOwOY
Main parts included in the build:
(UK Amazon)
Case: amzn.to/3YscW5E
CPU: amzn.to/3Rb31xF
GPU: amzn.to/4jmuSH2
RAM: amzn.to/42netev
MOBO: amzn.to/42pRZtz
PSU: amzn.to/42neuPB
Cooler: amzn.to/4lnifNX
Storage: amzn.to/4ia8Ztm
Thermal Paste: amzn.to/3EjzSxk
Keyboard: amzn.to/3Eejsq2
Mouse: amzn.to/3RIRW71
Lamp: amzn.to/4jBUbWs
Monitor: amzn.to/4hNz41P
Espresso Machine: amzn.to/40lcTsK
As an Amazon Associate, I may earn from qualifying purchases.
Building with the TR100 was a pleasurable experience with some really interesting stages. Other than the AIO pump LED's failing, the entire build process was simple, intuitive and easy to work with.
Fun fact: the LCD screen I used for this case was actually the screen for Thermaltakes CERES chassis. It would appear that Thermaltake have been using the same screen for all of their cases including the Tower series, so if you decide to pick up the TR100, finding a screen shouldn't be an issue! (other than the price!)
Read our full thoughts on this build here:
mrmattlee.com/post/thermaltaketr100
What's your thoughts on the TR100? Let's chat in the comments!
---------------------------------------------------------------
Subscribe to my 2nd Channel for more! @MrMattLeeV2
---------------------------------------------------------------
โโ BUY ME A COFFEE! โโ
Show you support for the channel. Bonus - get a shout out in the next video! No subscription or sign-up required!
buymeacoffee.com/MrMattLee
---------------------------------------------------------------
Please like and subscribe if you want to see more content like this, also follow the link below to my Instagram where you will find the photoshoot pictures and lots more like-minded content :D
----------------------------------------------------------------
Find me on socials:
instagram.com/mr_matt_lee
twitter.com/mr_matt_lee
facebook.com/MrMatthewLee
Timecodes, though I don't recommend skipping for visual narrative reasons! (Quality headphones or speakers recommended throughout)
00:00 - Introduction
00:56 - The Importance of Space
01:40 - The Toolkit Basics
02:29 - How Tight is too Tight?
03:15 - Install a CPU the Right Way
04:07 - All about Thermal Paste
05:14 - RAM Installation
06:10 - Case Cables Explained
07:17 - Get your Power Right
08:33 - The Order of Building Your PC
09:34 - You Should Read The Manuals...
10:19 - Roundup
Even those of us who have built literally hundreds of PC's occasionally need a reminder of the best practices when building. From the correct tools, to the order of which we put things together... making the process easier and less stressful is always a winner in my books.
Of course, there are loads more hints and tips which could be shared too, so perhaps a part two of this video is in order? Let me know your thoughts!
Links to some of my personal recommendations for tools, thermalpaste and more can be found below:
Recommended Products
(USA Amazon)
Large Desk Mat for building - amzn.to/44c36sj
PH2 Screwdriver - amzn.to/3Ek9jYJ
Precision Screwdriver - amzn.to/3R4LLKk
Velcro for cable management - amzn.to/42nyTUU
Thermalpaste 3.5g - amzn.to/4j4PXWY
Thermalpaste 10g - amzn.to/43HQlFQ
Thermal Paste Cleaning - amzn.to/4hZMxmL
AM5 Thermal Paste Guard - amzn.to/4hZzzFx
Easy to build ATX case - amzn.to/4iWdUPR
Easy to Build MATX case - amzn.to/42wU1sT
Easy to Build ITX case - amzn.to/41YLnmU
Recommended PSU - amzn.to/421am96
Coffee Machine - amzn.to/3FW3X6F
Recommended Products
(UK Amazon)
Large Desk Mat for building - amzn.to/42jVVMe
PH2 Screwdriver - amzn.to/4cgg0aK
Precision Screwdriver - amzn.to/428T5JO
Velcro for cable management - amzn.to/44eJALU
Thermalpaste 3.5g - amzn.to/3XP2Qf8
Thermalpaste 10g - amzn.to/4hVVmOp
Thermal Paste Cleaning - amzn.to/3DTYooI
AM5 Thermal Paste Guard - amzn.to/42hMNaP
Easy to build ATX case - amzn.to/42oS4O7
Easy to build MATX case - amzn.to/3G96avl
Easy to build ITX case - amzn.to/4hVVs8J
Recommended PSU - amzn.to/3Rza6bd
Coffee Machine - amzn.to/3R43mSB
As an Amazon Associate, I may earn from qualifying purchases.
If you want to recap these tips later, we wrote a blog where you can check out some images and read more:
mrmattlee.com/post/pcbuildingtips
---------------------------------------------------------------
Subscribe to my 2nd Channel for more! @MrMattLeeV2
---------------------------------------------------------------
โโ BUY ME A COFFEE! โโ
Show you support for the channel. Bonus - get a shout out in the next video! No subscription or sign-up required!
buymeacoffee.com/MrMattLee
---------------------------------------------------------------
Please like and subscribe if you want to see more content like this, also follow the link below to my Instagram where you will find the photoshoot pictures and lots more like-minded content :D
----------------------------------------------------------------
Find me on socials:
instagram.com/mr_matt_lee
twitter.com/mr_matt_lee
facebook.com/MrMatthewLee
Timecodes, though I don't recommend skipping for visual narrative reasons!
00:00 - How Did We Get Here?
01:08 - S400 Overview
01:54 - Build Hardware
02:27 - Motherboard Assembly
04:35 - S400 Assembly
06:27 - Making The Impossible, Possible.
08:24 - Airflow Visual & Sound Levels
09:20 - Cinematic & Desk Setup
11:24 - Coffee Thanks & Bloopers
When it comes to building Mini ITX systems, it's easy to get carried away with installing hardware which is simply overpowered for the case the size. With this build however, I wanted to keep the hardware fair, whilst also pushing the boundaries for the general GPU size.
MiniNeo / Shiny Snake make bold claims that the case supports GPU's up to 335mm, and whilst it is technically possible, it's just not that simple. The TUF Gaming RTX 5070 OC shouldn't technically fit, though it does fall within the allowed dimensions. However, some fettling and cautious case bending allowed it!
Final conclusion following build hardware list:
Main parts included in the build:
(USA Amazon)
Case: Black - amzn.to/3FZkUwJ
CPU: amzn.to/3FXqtvD
GPU: amzn.to/3DZ3Mqo
RAM: amzn.to/4hTpVV4
MOBO: amzn.to/4c6AYJ4
PSU: amzn.to/4hVZs9k
Cooler: amzn.to/3Ybrjv5
Storage: amzn.to/3E83DRt
Fans: amzn.to/3E2mXQb
Thermal Paste: amzn.to/3XEoUsN
Keyboard: amzn.to/4iL3GSi
Mouse: amzn.to/4laecnN
Monitor: amzn.to/4hrs5vP
Espresso Machine: amzn.to/4apOwOY
Main parts included in the build:
(UK Amazon)
Case: amzn.to/4ch8rAW
CPU: amzn.to/3Rsa590
GPU: amzn.to/4iPjYd6
RAM: amzn.to/42mdwnX
MOBO: amzn.to/4laepY7
PSU: amzn.to/3FKtvDA
Cooler: amzn.to/4iJGFzd
Storage: amzn.to/4j5LKlT
Fans: amzn.to/3DUej6n
Thermal Paste: amzn.to/4cgsyze
Keyboard: amzn.to/4hNGWjn
Mouse: amzn.to/4cejfzN
Lamp: amzn.to/4jBUbWs
Monitor: amzn.to/4hNz41P
Espresso Machine: amzn.to/40lcTsK
As an Amazon Associate, I may earn from qualifying purchases.
I Purchased the S400 which came with a GEN4 Riser cable. We did include this during the build stages of the video, but even though we set the BIOS to PCIE Gen 4 (and later Gen 3) the screen tearing issues kept happening so we replaced the riser for a completely different brand.
I can't say if this issue is ongoing with riser cables included with the S400 or if the one I purchased was faulty, so I would proceed with that in mind should you wish to replicate the build.
Quirks aside, the S400 was a stressful but very rewarding building experience and the final result looks absolutely amazing. Not one for beginners, but certainly one for those looking for a Mini ITX challenege!
Read our full thoughts on this build here:
What's your thoughts? Let's chat in the comments!
---------------------------------------------------------------
Subscribe to my 2nd Channel for more! @MrMattLeeV2
---------------------------------------------------------------
โโ BUY ME A COFFEE! โโ
Show you support for the channel. Bonus - get a shout out in the next video! No subscription or sign-up required!
buymeacoffee.com/MrMattLee
---------------------------------------------------------------
Please like and subscribe if you want to see more content like this, also follow the link below to my Instagram where you will find the photoshoot pictures and lots more like-minded content :D
----------------------------------------------------------------
Find me on socials:
instagram.com/mr_matt_lee
twitter.com/mr_matt_lee
facebook.com/MrMatthewLee
Timecodes, though I don't recommend skipping for visual narrative reasons!
00:00 - Intro: How did we get here?
01:08 - Montech XR Wood Overview
02:25 - Build Hardware
02:52 - Motherboard Assembly
04:27 - Montech XR Wood Assembly
08:04 - Airflow Visual & Noise Levels
09:05 - Cinematic & Desk Setup
11:23 - Coffee Thanks & Bloopers
Montech have well established themselves as a low cost PC case manufacturer at this point. The XR Wood offers a minimalist approach to adding wood accents to a PC case, but I personally feel it was the right move. This enables us as PC builders to bring that aesthetic through the rest of the case without feeling that the accents are overpowering.
Coming in at under $80, the XR wood edition isn't particularly premium in terms of materials and overall build quality, but that's quite alright. It truly excels with airflow and fan support, whilst having a vibey aesthetic for those who enjoy a taste of walnut in their living / gaming space.
Final conclusion following build hardware list:
Main parts included in the build:
(USA Amazon)
Case: Coming Soon
CPU: amzn.to/41RfdZb
GPU: amzn.to/4iUhv0B
RAM: amzn.to/4hBclWi
MOBO: amzn.to/4ixnMQa
PSU: amzn.to/4bSCEpF
Cooler: amzn.to/41Tq84H
Storage: amzn.to/4ireXXZ
Cable Extensions: amzn.to/4itGJ6a
Fans: amzn.to/41SRyI1
Thermal Paste: amzn.to/4hulxM4
Keyboard (alternative): amzn.to/4iNjrYI
Mouse: amzn.to/4iRSe76
Monitor: amzn.to/4hrs5vP
Headphones: amzn.to/4iAxaCr
Espresso Machine: amzn.to/4apOwOY
Main parts included in the build:
(UK Amazon)
Case: Coming Soon
CPU: amzn.to/4kUgNCr
GPU: amzn.to/4kIA4qp
RAM: amzn.to/4iN2ZYq
MOBO: amzn.to/4itX1vV
PSU: amzn.to/4iQot6J
Cooler (alternative): amzn.to/4hBdcpY
Storage: amzn.to/4bSQqZx
Cable Extensions: amzn.to/4ixp3qq
Fans: amzn.to/4ilqLuN
Thermal Paste: amzn.to/4iteCEc
Keyboard: not available
Mouse: amzn.to/4kxL2yT
Lamp: amzn.to/4jBUbWs
Headphones: amzn.to/4hu10r3
Monitor: amzn.to/4hNz41P
Espresso Machine: amzn.to/40lcTsK
Montech continue to add solid cases to their expanding lineup. The XR Wood should find it's place nicely, rivalling cases such as the Corsair 4000D and NZXT H5 Flow for raw airflow potential. I'd even say this one could perform along side the Antec Flux whilst coming in cheaper still.
Hats off to Montech for making yet another, elegant and affordable chassis for us PC DIYers to explore.
What's your thoughts on this build? Let's chat in the comments!
Read the complete build writeup here:
mrmattlee.com/post/montechxrwood
---------------------------------------------------------------
Subscribe to my 2nd Channel for more! @MrMattLeeV2
---------------------------------------------------------------
โโ BUY ME A COFFEE! โโ
Show you support for the channel. Bonus - get a shout out in the next video! No subscription or sign-up required!
buymeacoffee.com/MrMattLee
---------------------------------------------------------------
Please like and subscribe if you want to see more content like this, also follow the link below to my Instagram where you will find the photoshoot pictures and lots more like-minded content :D
----------------------------------------------------------------
Find me on socials:
instagram.com/mr_matt_lee
twitter.com/mr_matt_lee
facebook.com/MrMatthewLee
Timecodes, though I don't recommend skipping for visual narrative reasons!
00:00 - Intro: Something Different
00:58 - Frame 4000D Overview
02:00 - Build Hardware
02:26 - Motherboard Assembly
04:56 - Frame 4000D Assembly
07:20 - TUF Gaming RTX 5070
08:43 - Noise Levels & Airflow Visualization
09:40 - Cinematic & Desk Setup
11:57 - Coffee Thanks & Outtakes
It goes without saying that the 4000D has hit the sweet spot for many thanks to its excellent airflow and hardware compatibility. This new version truly takes things up a level with more perforations, the Infinirail fan mounting system and loads of modularity to refine exactly the system you need.
This Blackout setup certainly hits different, breaking the mould of what we usually visualise with Corsair systems and instead embracing the blackout, refined look. The A115 air cooler performed exceptionally with the Ryzen 7 7800X3D whilst keeping the system relatively quiet too.
Final conclusion following build hardware list:
Main parts included in the build:
(USA Amazon)
Case: amzn.to/3DvJVz7
CPU: amzn.to/4iqxGTq
GPU (RTX 5070): not available
GPU (RTX 5070 Ti): amzn.to/41TmhEy
RAM: amzn.to/4it0yuf
MOBO: amzn.to/4bQBz1w
PSU: amzn.to/41TsbWi
Cooler: amzn.to/4hkkgHu
Storage: amzn.to/4ivwaiS
Cable Extensions: amzn.to/3FwMSA0
Fans: amzn.to/4kQaHCU
Keyboard: amzn.to/4kP17A6
Mouse: amzn.to/4iRSe76
Monitor: amzn.to/4hrs5vP
Espresso Machine: amzn.to/4apOwOY
Main parts included in the build:
(UK Amazon)
Case: amzn.to/3DKMX2r
CPU: amzn.to/4iRSvXG
GPU: not available
RAM: amzn.to/4iqq7vE
MOBO: amzn.to/4bPc80c
PSU: amzn.to/4bQDu6e
Cooler: amzn.to/4iukJb8
Storage: amzn.to/4kQDFT1
Fans: amzn.to/425cDjs
Keyboard: not available
Mouse: amzn.to/4kxL2yT
Lamp: amzn.to/4jBUbWs
Monitor: amzn.to/4hNz41P
Espresso Machine: amzn.to/40lcTsK
From beginners to seasoned pro's alike, the Corsair Frame 4000D hits the sweet spot at a modest budget. Coming in around $80, there are few other cases with so much airflow focus and modularity combined and that's certainly something to pay attention to.
I must also say that I've been incredibly impressed with the fans from Corsair too, specifically the non-rgb category. The Fans we used within this build (including the air cooler) performed above expectations whilst keeping noise levels at a minimum whilst gaming.
What's your thoughts on this Frame 4000D build? Let's chat in the comments!
Read the complete build writeup here:
mrmattlee.com/post/corsairframe4000d
---------------------------------------------------------------
Subscribe to my 2nd Channel for more! @MrMattLeeV2
---------------------------------------------------------------
โโ BUY ME A COFFEE! โโ
Show you support for the channel. Bonus - get a shout out in the next video! No subscription or sign-up required!
buymeacoffee.com/MrMattLee
---------------------------------------------------------------
Please like and subscribe if you want to see more content like this, also follow the link below to my Instagram where you will find the photoshoot pictures and lots more like-minded content :D
----------------------------------------------------------------
Find me on socials:
instagram.com/mr_matt_lee
twitter.com/mr_matt_lee
facebook.com/MrMatthewLee
Timecodes, though I don't recommend skipping for visual narrative reasons! (Quality headphones or speakers recommended throughout)
00:00 - Intro
00:38 - Mini ITX
02:53 - Micro ATX
05:15 - Mid-Tower ATX
08:35 - Full Tower E-ATX
09:39 - In Summary
Building a PC for the first time can be a daunting task, understanding what some of the case sizes mean can be greatly beneficial when first starting on your PC DIY journey. I've had countless conversations with new PC builders who either assembled a system which was unnecessarily large or a little too small, resulting in a prompt rebuild at further expense.
Getting your PC size correct the first time not only saves the headaches of spending more money, but also ensures your system is optimised exactly for your intended use!
Hopefully this video provides some insights spanning from Mini ITX right through to some of the largest EATX towers on the market right now.
Links to some of my personally recommendations within each form factor can be found below, and all of the builds featured in this video can be found on the channel too. Make sure you are subscribed, and take a look back through previous uploads to find them:
Final conclusion and temperatures following build hardware list:
Recommended Cases
(USA Amazon)
ITX
Fractal Terra: amzn.to/3Fi5pzV
Minineo S300: amzn.to/3Xy9KVF
Jonsbo TK-0: amzn.to/4kEOjw7
Cooler Master NCore 100 Max: amzn.to/41CHAdn
SSUPD Meshroom D: amzn.to/41Qd9lk
MATX
Jonsbo D32: amzn.to/4istAtS
Jonsbo Z20: amzn.to/4bFhBqh
ASUS Prime AP 201: amzn.to/3Dfn0Ic
Dan Cases A3 Wood Edition: amzn.to/3Fc321A
ThermalTake Tower 300: amzn.to/4bCW3uu
ATX
TUF Gaming GT302: amzn.to/4bBt0r8
Fractal North: amzn.to/3QTLutp
Lian Li O11 Vision Compact: amzn.to/3XBJABq
Montech Air 903: amzn.to/4iBLs5j
NZXT H6 Flow: amzn.to/4kE6XEk
Full Tower
ROG Hyperion: amzn.to/4hl2p2M
ProArt PA602 Wood Edition: amzn.to/4hhORVT
Cooler Master HAF700: amzn.to/4iDl1Mv
Lian Li LanCool 3: amzn.to/3QTp4sm
Antec Flux Pro: amzn.to/4iBMBK9
Recommended Cases
(UK Amazon)
ITX
Fractal Terra: amzn.to/43zs8Bn
Minineo S300: amzn.to/3FgxffL
Jonsbo TK-0: amzn.to/41Ei4o2
Cooler Master NCore 100 Max: amzn.to/3QTMpdl
SSUPD Meshroom D: amzn.to/4iAYaBh
MATX
Jonsbo D31: amzn.to/3QVqfYg
Jonsbo Z20: amzn.to/4hl3LdS
ASUS Prime AP 201: amzn.to/41CM4Rf
Lian Li/Dan Cases A3 Wood Edition: amzn.to/4ivYEZm
ThermalTake Tower 300: amzn.to/3DC3OEo
ATX
TUF Gaming GT302: amzn.to/3DwMII5
Fractal North: amzn.to/3Dw0db4
Lian Li O11 Vision Compact: amzn.to/3XCvM9U
Montech Air 903: amzn.to/3DjfrjI
NZXT H6 Flow: amzn.to/3Dp1Ib3
Full Tower
ROG Hyperion: amzn.to/41RcHDn
ProArt PA602 Wood Edition: amzn.to/3FhX8Mf
Cooler Master HAF700: amzn.to/3DuX3US
Lian Li LanCool 3: amzn.to/4hjAUGY
Antec Flux Pro: amzn.to/4kAkkp4
As an Amazon Associate, I may earn from qualifying purchases.
---------------------------------------------------------------
Subscribe to my 2nd Channel for more! @MrMattLeeV2
---------------------------------------------------------------
โโ BUY ME A COFFEE! โโ
Show you support for the channel. Bonus - get a shout out in the next video! No subscription or sign-up required!
buymeacoffee.com/MrMattLee
---------------------------------------------------------------
Please like and subscribe if you want to see more content like this, also follow the link below to my Instagram where you will find the photoshoot pictures and lots more like-minded content :D
----------------------------------------------------------------
Find me on socials:
instagram.com/mr_matt_lee
twitter.com/mr_matt_lee
facebook.com/MrMatthewLee
Timecodes, though I don't recommend skipping for visual narrative reasons!
00:00 - Recovering the Asset
02:00 - Radeon RX 9070 Unboxing
03:00 - Prime RX 9070 First Look
03:49 - Build Hardware
04:22 - Motherboard Assembly
06:04 - TUF Gaming GT302 Assembly
08:21 - Airflow Visualization
08:50 - Cinematics & Desk Setup
10:42 - Coffee Thanks & Outtakes
The RX 9000 Series has to be one of the most anticipated launches so far in 2025 and you bet we've been stoked to finally build with and experience the next generation of Radeon architecture.
For this build I opted to pull in the PRIME 9070's visual design language going with a black and white theme whilst keeping the lines symmetrical and subtle. Much like the the new GeForce cards, the Radeon 9000 series also work on GEN5 PCIe, so it's best ideal you're using a GEN5 riser cable in the event you wish to vertical mount in the same style as this video.
Final conclusion following build hardware list:
Main parts included in the build:
(USA Amazon)
Case: amzn.to/3Xp3QXc
CPU: amzn.to/3FclM0C
GPU: Coming Soon
RAM (alternative): amzn.to/4h5RXMJ
MOBO: amzn.to/4ioaa98
PSU: amzn.to/4krmTKj
Cooler (alternative): amzn.to/3D1myx6ย ย
Storage: amzn.to/4kjRUj9
Cable Extensions: amzn.to/4ipXgrr
Gen 5 Riser Cable: amzn.to/4blsRYV
Thermal Paste: amzn.to/3QJ06f6
Keyboard: amzn.to/3QH0Dyo
Mouse: amzn.to/43gY4KH
Monitor: amzn.to/4hrs5vP
Espresso Machine: amzn.to/4apOwOY
Main parts included in the build:
(UK Amazon)
Case: amzn.to/3QGPYnb
CPU: amzn.to/4h9CZVQ
GPU: Coming Soon
RAM (alternative): amzn.to/3XpasEQย ย
MOBO: amzn.to/41Fb4ZF
PSU: amzn.to/4idXX7e
Cooler: amzn.to/4i2yxcN
Storage: amzn.to/4br4MzK
Cable Extensions: amzn.to/4bqqqED
Gen 5 Roser Cable: amzn.to/3F3RkWI
Thermal Paste: amzn.to/4i00Pof
Keyboard: amzn.to/41qFkG2
Mouse: amzn.to/41qFNIv
Monitor: amzn.to/4hNz41P
Espresso Machine: amzn.to/40lcTsK
As an Amazon Associate, I may earn from qualifying purchases.
Whilst we can't talk about the performance data at this point as those details are still under embargo, I can say that AMD have done great here with the pricing, sliding the RX 9070 right at the sweet spot for where most gamers want to be... The added bonus? 16GB VRAM! YES!
Read our full thoughts on this build here and add a bookmark, as I will be updating this build blog with performance testing data asap.
mrmattlee.com/post/primerx9070
What's your thoughts on the PRIME RX 9070? Will you be choosing this, or the XT version? Let's chat in the comments!
---------------------------------------------------------------
Subscribe to my 2nd Channel for more! @MrMattLeeV2
---------------------------------------------------------------
โโ BUY ME A COFFEE! โโ
Show you support for the channel. Bonus - get a shout out in the next video! No subscription or sign-up required!
buymeacoffee.com/MrMattLee
---------------------------------------------------------------
Please like and subscribe if you want to see more content like this, also follow the link below to my Instagram where you will find the photoshoot pictures and lots more like-minded content :D
----------------------------------------------------------------
Find me on socials:
instagram.com/mr_matt_lee
twitter.com/mr_matt_lee
facebook.com/MrMatthewLee
Timecodes, though I don't recommend skipping for visual narrative reasons!
00:00 - A Throwback Intro
01:14 - Jonsbo TK-0 Overview
02:08 - Build Hardware
02:38 - Motherboard Assembly
04:18 - Jonsbo TK-0 Assembly
06:48 - Airflow Visual & Sound Levels
07:31 - Cinematic & Desk Setup
09:28 - Coffee Thanks & Outtakes
When it comes to Mini ITX cases, you could say there are quite a fair number of them which tick all the right boxes for hardware support. Where the TK-0 differs is with it's dual chamber format, keeping cable management simple whilst also retaining a unique layout format for its size.
Of course, the Jonsbo TK-0 is going to come with some severe limitations, such as zero liquid cooling and very limited fan support, but assuming you're building within the limitations this ITX build really does hit the spot for a small size 1080p and even 1440p performance build.
I've always been a big fan of Jonsbo's build quality and the TK-0 continues this with a very sturdy construction and a single bi-curved glass panel which looks amazing in person.
Final conclusion following build hardware list:
Main parts included in the build:
(USA Amazon)
Case: amzn.to/432Ityt
CPU: amzn.to/3Qr8foD
GPU: amzn.to/4hQzl4C
RAM: amzn.to/3D2XTrW
MOBO: amzn.to/41c2Pmk
PSU: amzn.to/41paS0d
Cooler: amzn.to/437JjK5
Fan 120mm: amzn.to/4gPx8oz
Fan 140mm: amzn.to/4hK3DWz
Storage: amzn.to/4i3xf0E
Cable Extensions: amzn.to/3Xb1hYD
Keyboard: Drop x Noctua
Mouse: amzn.to/3XDtZBJ
Monitor: amzn.to/4hrs5vP
Espresso Machine: amzn.to/4apOwOY
Main parts included in the build:
(UK Amazon)
Case: Overclockers
CPU: amzn.to/4k8jvnm
GPU: amzn.to/4hO3KQL
RAM: amzn.to/3Xdju7E
MOBO: amzn.to/3CZ4R14
PSU: amzn.to/3Xc4Opg
Cooler: amzn.to/3ERsWHF
Fan 120mm: amzn.to/3EQ1xWD
Fan 140mm: amzn.to/4beW5ZA
Storage: amzn.to/41mlixH
Cable Extensions: amzn.to/41qwnxM
Keyboard: Drop x Noctua
Mouse: amzn.to/4hPrHqX
Monitor: amzn.to/4hNz41P
Espresso Machine: amzn.to/40lcTsK
As an Amazon Associate, I may earn from qualifying purchases.
In a market dominated by similar looking Mini ITX cases, the Jonsbo TK-0 is unique in it's own right with a dual chamber layout, wood and curved glass panel. This could be considered an even smaller alternative to the popular Lian Li O11 Mini! Keep in mind, your GPU size will ultimately dictate wether or not this case is right for you!
Read our full thoughts on this build here:
mrmattlee.com/post/jonsbod32
What's your thoughts on the TK-0? Let's chat in the comments!
---------------------------------------------------------------
Subscribe to my 2nd Channel for more! @MrMattLeeV2
---------------------------------------------------------------
โโ BUY ME A COFFEE! โโ
Show you support for the channel. Bonus - get a shout out in the next video! No subscription or sign-up required!
buymeacoffee.com/MrMattLee
---------------------------------------------------------------
Please like and subscribe if you want to see more content like this, also follow the link below to my Instagram where you will find the photoshoot pictures and lots more like-minded content :D
----------------------------------------------------------------
Find me on socials:
instagram.com/mr_matt_lee
twitter.com/mr_matt_lee
facebook.com/MrMatthewLee
Timecodes, though I don't recommend skipping for visual narrative reasons!
00:00 - Intro: PC DIY Lucky Dip
02:06 - Pure Base 501 Overview
02:58 - Build Hardware
03:26 - Motherboard Assembly
05:39 - Pure Base 501 Assembly
09:13 - Airflow Visualization
09:39 - Cinematic & Desk Setup
12:09 - Coffee Thanks & Outtakes
The Pure Base 501 comes in a few different chassis arrangements. This specific model is the 'Airflow Windowed' version which I feel gives the best of low noise whilst retaining hardware visibility, even in a blackout zero RGB form.
For a mid tower form factor, the Pure Base 501 does an excellent job of remaining compact with some solid hardware support. Radiators up top take quite a hit with 240mm being the maximum (360mm up front) but it makes up for it with great GPU length, housing most of the larger 50 series cards too.
You know I love I good air cooler here on the channel and the Dark Rock Pro 5 is an excellent performer both in terms of noise levels and cooling. be quiet! have made good of the installation stages which require minimal effort with a simplified process (they even include the screwdriver!)
Final conclusion following build hardware list:
Main parts included in the build:
(USA Amazon)
Case: amzn.to/4hF47Nz
CPU: amzn.to/4jStn4F
GPU: coming soon
RAM: amzn.to/4jYLwxC
MOBO: amzn.to/4b44sqv
PSU: amzn.to/3Qm078S
Cooler: amzn.to/3CIqHWy
Fans: amzn.to/4gIBRYY
Fan Hub (alternative): amzn.to/41gw34K
Storage: amzn.to/4hY9N5c
Keyboard: amzn.to/4347Kbg
Mouse: amzn.to/4hvIaQC
Headphones: amzn.to/3EEwQnj
Monitor: amzn.to/4hrs5vP
Espresso Machine: amzn.to/4apOwOY
Main parts included in the build:
(UK Amazon)
Case: amzn.to/4gIC7ao
CPU: amzn.to/3EFWKXC
GPU: Coming Soon
RAM: amzn.to/4hDRcvt
MOBO: amzn.to/4gGG1Rq
PSU: amzn.to/4k41Flx
Cooler: amzn.to/4jYydNw
Fans: amzn.to/4i0RUm4
Fan Hub (alternative): amzn.to/4b8evLh
Storage: amzn.to/4hUAp6W
Keyboard: not available
Mouse: amzn.to/4hcG4p4
Headphones: amzn.to/42XcY8Q
Lamp: amzn.to/4jBUbWs
Monitor: amzn.to/4hNz41P
Espresso Machine: amzn.to/40lcTsK
It doesn't matter if you're a seasoned PC builder or a complete beginner, the Pure Base 501 hits the sweet spot for a PC case which performs great with a mature design aesthetic. Whilst the two Pure wings 3 fans which come supplied are okay, I'd highly recommend adding a couple of extras to truly optimise the airflow for both your CPU and GPU.
What's your thoughts on this build? Let's chat in the comments!
Read the complete build writeup here:
mrmattlee.com/post/purebase501
---------------------------------------------------------------
Subscribe to my 2nd Channel for more! @MrMattLeeV2
---------------------------------------------------------------
โโ BUY ME A COFFEE! โโ
Show you support for the channel. Bonus - get a shout out in the next video! No subscription or sign-up required!
buymeacoffee.com/MrMattLee
---------------------------------------------------------------
Please like and subscribe if you want to see more content like this, also follow the link below to my Instagram where you will find the photoshoot pictures and lots more like-minded content :D
----------------------------------------------------------------
Find me on socials:
instagram.com/mr_matt_lee
twitter.com/mr_matt_lee
facebook.com/MrMatthewLee
Timecodes, though I don't recommend skipping for visual narrative reasons!
00:00 - Settling Requests
01:18 - HAVN HS 420 VGPU Overview
02:26 - Build Hardware
02:59 - Motherboard Assembly
04:45 - HAVN HS 420 Assembly
08:48 - Airflow Visualization
09:28 - Cinematic & Desk Setup
11:50 - Coffee Thanks & Bloopers
The HAVN HS 420's have been requested on the channel ever since their launch, and whilst it's taken a little time to get there, I'm stoked to finally share with you my latest RTX 5080 build with the VGPU version.
It goes without saying that there are few cases on the market which can truly rival the cooling potential with this one. I built with eight 140mm Phanteks fans (four in, four out) which gave this system more airflow than it could ever need. It's crazy to think that there was still space for a further three 140mm fans if needed on the side panel too!
HAVN have truly embraced something a little different here. The bottom intake fans came into their own with directing the flow of air towards the GPU which was evident during testing. We didn't anticipate the ROG Astral to exhaust through the cable management holes however, but that was really awesome to see!
Final conclusion following build hardware list:
Main parts included in the build:
(USA Amazon)
Case (VGPU): amzn.to/4hP39hn
Case (standard version): amzn.to/4jR29uV
CPU: amzn.to/4jO6rTQ
GPU: amzn.to/4jSA6v9
RAM: amzn.to/4jI2vEp
MOBO: amzn.to/4k0N2PU
PSU: amzn.to/42CTNkt
Cooler: amzn.to/3CI2Juk
Fans: amzn.to/4htkXiv
Storage (alternative): amzn.to/4ha9Af7
Keyboard: amzn.to/4hRLc1T
Mouse: amzn.to/4hvIaQC
Monitor: amzn.to/4hrs5vP
Espresso Machine: amzn.to/4apOwOY
Main parts included in the build:
(UK Amazon)
Case (VGPU): amzn.to/40NPJLU
Case (Standard): amzn.to/41ajsA8
CPU: amzn.to/4hPzRPS
GPU: not available
RAM: amzn.to/4gAtPBz
MOBO: amzn.to/4gzVbaO
PSU: amzn.to/40Ee1Yr
Cooler: amzn.to/4gAlZrJ
Fans: amzn.to/42QBqbV
Storage: amzn.to/4hHzQ0p
Keyboard: not available
Mouse: amzn.to/4hcG4p4
Lamp: amzn.to/4jBUbWs
Monitor: amzn.to/4hNz41P
Espresso Machine: amzn.to/40lcTsK
As an Amazon Associate, I may earn from qualifying purchases.
As a new challenger to the table, HAVN have made an incredible entrance to the PC DIY space. With 50 series GPU's now slowly entering the market, this one will certainly hit the spot for keeping low temps with huge hardware visibility thanks to that massive curved glass panel. Very excited to see what HAVN come up with next!
Read our full thoughts on this build and performance details here:
mrmattlee.com/post/havnhs420
Special thanks to the teams at Pro Gamersware, @Phanteks & @OverclockersUK for supporting this project. Check out the HAVN HS 420 VGPU here:
bit.ly/havnhs420
---------------------------------------------------------------
Subscribe to my 2nd Channel for more! @MrMattLeeV2
---------------------------------------------------------------
โโ BUY ME A COFFEE! โโ
Show you support for the channel. Bonus - get a shout out in the next video! No subscription or sign-up required!
buymeacoffee.com/MrMattLee
---------------------------------------------------------------
Please like and subscribe if you want to see more content like this, also follow the link below to my Instagram where you will find the photoshoot pictures and lots more like-minded content :D
----------------------------------------------------------------
Find me on socials:
instagram.com/mr_matt_lee
twitter.com/mr_matt_lee
facebook.com/MrMatthewLee
Timecodes, though I don't recommend skipping for visual narrative reasons!
00:00 - INTRO - GPU's are changing
01:17 - DESIRE - Unboxing ROG Astral
02:50 - FIRST LOOK - ROG Astral
03:38 - REFLECTING - Past Generations
04:58 - Airflow Visualization
05:35 - Build Cinematic
07:36 - Coffee Thanks & Outtakes
The ASUS ROG Astral is without a doubt one of the more unique graphics cards we've seen for quite some time. The RTX 5080 and RTX 5090 models share the same dimensions, therefore this video is valid for both.
Premium materials, premium price tag, that's pretty much the summary here, but with the price of RTX 5090 boards already being expensive, the ROG Astral paves its way forward as a standout product in it's own right.
There has been a small number of complaints saying that the additional fan increases noise levels due to turbulence. I did test extensively for this, but other than a marginal increase in volumes due to having one extra fan, it seems our version isn't prone to anything unordinary.
It was also noted during the Astral Overview section of the video that the measurements supplied by ASUS on their website is incorrect. They placed the Astral as dimensionally the same as the ROG Strix RTX 4080 / 4090 but we found Astral to be around 7mm shorter which is quite significant. Hopefully ASUS will amend the measurements ASAP.
Final conclusion following build hardware list:
Main parts included in the build:
(USA Amazon)
Case: KOMP MAGNUS II
CPU: amzn.to/42C6cW3
GPU: bit.ly/ROGASTRAL
RAM: amzn.to/3CmdEtL
MOBO: amzn.to/40GTPVN
PSU: amzn.to/42CTNkt
Cooler: amzn.to/3CAtAsj
Storage: amzn.to/4ha9Af7
Keyboard: amzn.to/4gcqCb3
Mouse: amzn.to/4hvIaQC
Monitor: amzn.to/4e7IIu7
Espresso Machine: amzn.to/4apOwOY
Main parts included in the build:
(UK Amazon)
Case: KOMP MAGNUS II
CPU: amzn.to/3WGfCMl
GPU: bit.ly/ROGASTRAL
RAM: amzn.to/4aEBVHS
MOBO: amzn.to/4aFLOVY
PSU: amzn.to/40Ee1Yr
Cooler (alternative): amzn.to/3WKFEOn
Storage: amzn.to/4hHzQ0p
Keyboard: not available
Mouse: amzn.to/4hcG4p4
Lamp: amzn.to/4jBUbWs
Monitor: amzn.to/4778eh2
Espresso Machine: amzn.to/40lcTsK
As an Amazon Associate, I may earn from qualifying purchases.
It goes without saying that GPU's are changing. With inflated prices from Nvidia to begin with, partner cards are also ramping up in price. The ROG Astral certainly stands out as one of the more premium products I've ever unboxed and built with. Airflow is huge, performance is great and the overall aesthetics are pretty sweet!
Read our full thoughts on this build and performance details here:
mrmattlee.com/post/rogastralrtx
Find out more on the ASTRAL RTX 5080 OC and keep an eye on stock levels here:
bit.ly/ROGASTRAL
What's your thoughts on the ASUS ASTRAL GPU from ASUS? Let's chat in the comments!
---------------------------------------------------------------
Subscribe to my 2nd Channel for more! @MrMattLeeV2
---------------------------------------------------------------
โโ BUY ME A COFFEE! โโ
Show you support for the channel. Bonus - get a shout out in the next video! No subscription or sign-up required!
buymeacoffee.com/MrMattLee
---------------------------------------------------------------
Please like and subscribe if you want to see more content like this, also follow the link below to my Instagram where you will find the photoshoot pictures and lots more like-minded content :D
----------------------------------------------------------------
Find me on socials:
instagram.com/mr_matt_lee
twitter.com/mr_matt_lee
facebook.com/MrMatthewLee
Timecodes, though I don't recommend skipping for visual narrative reasons!
00:00 - The Evolution Begins
00:48 - ASUS PRIME RTX 5080 Unboxing
01:50 - ASUS PRIME 5080 First Look
02:49 - Montech Heritage Pro Overview
03:43 - Build Hardware
04:05 - Motherboard Assembly
05:41 - Montech Heritage Pro Assembly
08:55 - Airflow Visualization
09:17 - Cinematic & Desk Setup
11:27 - Coffee Thanks & Outtakes
In what only feels like the blink of an eye, we've evolved from the RTX 4080, to the RTX 5080. Not only does the latest generation bring more performance, but also a new aesthetic. Enter the ASUS PRIME GPU!
Taking heavy inspiration from the previous gen ProArt card, the ASUS PRIME shares a lot of similarities. Whilst very slightly larger dimensionally (and plastic) the PRIME 5080 really does hit the sweet spot falling around MSRP whilst keeping the design language clean and classy. That vapour chamber is a really nice touch to keep temps under check too!
As for the Montech Heritage Pro... Well, that's just a statement piece in it's self. From the brown eco-leather wrapped around the exterior to the roomy Micro ATX interior, there's a lot of scope with this one and airflow is plentiful too. I can't deny that I do have a bit of a sweet spot for this case, Montech have truly gone 'outside the box' to make something interesting and quirky. Commendable indeed!
Final conclusion following build hardware list:
Main parts included in the build:
(USA Amazon)
Case: amzn.to/4gjuDe2
CPU: amzn.to/42w6CNF
GPU: Coming Soon!
RAM: amzn.to/4jrVmrH
MOBO: amzn.to/4jxTy02
PSU (850w): amzn.to/4jzkrAH
PSU (1000w): amzn.to/40wtQk1
Cooler (alternative): amzn.to/4huLo6U
Storage: amzn.to/4gfLhv0
Keyboard: amzn.to/4gcqCb3
Mouse: amzn.to/4hvIaQC
Monitor: amzn.to/4e7IIu7
Lamp: amzn.to/4hyGAgL
Espresso Machine: amzn.to/4apOwOY
Main parts included in the build:
(UK Amazon)
Case: amzn.to/40tywXQ
CPU: amzn.to/42PWnnB
GPU: Coming Soon!
RAM: amzn.to/3PThwpa
MOBO: amzn.to/4gpgBYs
PSU (850w): amzn.to/4hzU5gc
PSU (1000w): amzn.to/4hyUIqA
Cooler: amzn.to/3Eb9YLL
Storage: amzn.to/4hb5RxL
Keyboard: not available
Mouse: amzn.to/4hcG4p4
Lamp: amzn.to/4jBUbWs
Monitor: amzn.to/4778eh2
Espresso Machine: amzn.to/40lcTsK
As an Amazon Associate, I may earn from qualifying purchases.
It's no surprise at this point that Micro ATX is my goto form factor. To finally get hands on with the first (of many) RTX 5080's has been a great experience and it's awesome to see how the sizing will work moving forwards.
As for the ASUS PRIME 5080 along with the Montech Heritage Pro... Well, they're kind of a match made for each other!
Read our full thoughts on this build and performance details here:
mrmattlee.com/post/primertx5080
ASUS ROG UK will be hosting a launch event for 50 series, more details here:
https://uk.asus.click/Mr-Matt-Lee-RTX50
Also, find out if your PSU meets the power requirements for 50 series here:
https://uk.asus.click/Mr-Matt-Lee-PSU-Calculator
What's your thoughts on the ASUS PRIME RTX 5080 / Heritage Pro Case? Let's chat in the comments!
---------------------------------------------------------------
Subscribe to my 2nd Channel for more! @MrMattLeeV2
---------------------------------------------------------------
โโ BUY ME A COFFEE! โโ
Show you support for the channel. Bonus - get a shout out in the next video! No subscription or sign-up required!
buymeacoffee.com/MrMattLee
---------------------------------------------------------------
Please like and subscribe if you want to see more content like this, also follow the link below to my Instagram where you will find the photoshoot pictures and lots more like-minded content :D
----------------------------------------------------------------
Find me on socials:
instagram.com/mr_matt_lee
twitter.com/mr_matt_lee
facebook.com/MrMatthewLee
Timecodes, though I don't recommend skipping for visual narrative reasons!
00:00 - A Calming Intro
01:51 - D32 Pro Overview
02:39 - Build Hardware
03:09 - Motherboard Assembly
04:55 - D32 Pro Assembly
08:10 - Airflow Visualization
08:29 - Cinematic & Desk Setup
10:24 - Coffee Thanks & Outtakes
What really defines 'Peak Micro ATX' ? Well, it's small... it has the ability to support a Strix RTX 4090 and the colossal Noctua RTX 4080... very little space wasted inside, whilst retaining a low cost and high build quality. Throw in the support for reverse motherboard connect and that's quite a large demand for such a small case.
Jonsbo are an illusive brand here in the UK. Whilst we can find them in places like Overclockers, it seems like all new releases take at least a year to make it to our market which blows my mind. Anyway, cut to present day and as luck should have it, a rouge D32 Pro appeared for sale finally!
I went into this build with similar expectations to that of the Z20 recently featured on the channel. The materials and overall build quality are much the same, including some typical Jonsbo style quirks along the way. The D32 Pro is much more spacious however which lends it's self for more airflow and great GPU compatibility which is a winner!
Final conclusion following build hardware list:
Main parts included in the build:
(USA Amazon)
Case: amzn.to/3ChKvzD
CPU: amzn.to/4fXOajW
GPU: amzn.to/4hjR4Rb
RAM: amzn.to/4aqNlPG
MOBO: amzn.to/3E0abkV
PSU (850w): amzn.to/4jlKc7C
PSU (750w): amzn.to/3Cch7ee
Cooler: amzn.to/3PI7lUm
Storage: amzn.to/40lct5E
Fans: amzn.to/4jkGHhE
Keyboard: amzn.to/4akHF9N
Mouse: amzn.to/4g5gvoH
Speaker: amzn.to/3WorYbS
Monitor: amzn.to/4e7IIu7
Coffee Machine: amzn.to/4apOwOY
Main parts included in the build:
(UK Amazon)
Case: Coming Soon (I hope)
CPU: amzn.to/4arHjye
GPU: amzn.to/4anDUQK
RAM: amzn.to/4hjRhUt
MOBO: amzn.to/4akI0cz
PSU (850w): amzn.to/3PGZTc0
PSU (750w): amzn.to/3PG71FC
Cooler: amzn.to/40jrx3z
Storage: amzn.to/3PKFeDG
Fans: amzn.to/3Wp9EPD
Keyboard: not available
Mouse: amzn.to/4hogYmZ
Speaker: amzn.to/4hfKgUs
Monitor: amzn.to/4778eh2
Coffee Machine: amzn.to/40lcTsK
As an Amazon Associate, I may earn from qualifying purchases.
Micro ATX is always my go-to form factor. Building with the D32 Pro was a pleasurable experience with some really interesting stages. I particularly liked to see the back connect motherboard support, this should hopefully grow even more as we progress into 2025... Perhaps a revisit with this case later is in order for that?
Read our full thoughts on this build here:
mrmattlee.com/post/jonsbod32
What's your thoughts on the D32 Pro? Let's chat in the comments!
---------------------------------------------------------------
Subscribe to my 2nd Channel for more! @MrMattLeeV2
---------------------------------------------------------------
โโ BUY ME A COFFEE! โโ
Show you support for the channel. Bonus - get a shout out in the next video! No subscription or sign-up required!
buymeacoffee.com/MrMattLee
---------------------------------------------------------------
Please like and subscribe if you want to see more content like this, also follow the link below to my Instagram where you will find the photoshoot pictures and lots more like-minded content :D
----------------------------------------------------------------
Find me on socials:
instagram.com/mr_matt_lee
twitter.com/mr_matt_lee
facebook.com/MrMatthewLee
Timecodes, though I don't recommend skipping for visual narrative reasons! (Quality headphones or speakers recommended throughout)
00:00 - Supercars & Technology
01:20 - EDGE Gold First Look
02:02 - Build Hardware
02:27 - Motherboard Assembly
04:04 - O11 EVO Lamborghini Assembly
08:07 - Airflow Visualization
08:32 - Cinematixc & Desk Setup
10:28 - Coffee Thanks & Bonus / Outtakes
Having spent the largest part of my professional life within the Supercar industry, you bet I was stoked to film this build video! When Lian Li sent out their new EDGE GOLD PSU, I was actually taken back a little by it. At what point did power supplies become something more than simply a source of power?
The relationship between the USB & Fan Hub to the PSU makes this unit almost the endgame when it comes to power supplies which tick every box you could possibly need. Not only that, but the freedom to utilise the components both in dual chamber and standard mid-tower format too.
As for the Lamborghini O11 Evo... This really is 'the one'. The implementation of the rear screen was a really nice touch, bringing in the performance dials in such a way that resembles a speedometer / hud has been extremely well executed. Hats off Lian Li...
Final conclusion following build hardware list:
USA Amazon Links:
Case: amzn.to/3WiHS7t
CPU: amzn.to/3WhrxQn
GPU: amzn.to/4aeZU0e
GPU (alternative): amzn.to/40tilLd
RAM: not available
MOBO: amzn.to/4jg32x5
PSU: Coming Soon
PSU (alternative): amzn.to/40eKrZy
24pin Strimer - amzn.to/3WiBJIt
12VHPWR Strimer - amzn.to/4jeO4Ht
Cooler: amzn.to/4fOGAbm
Thermal Paste: amzn.to/4gW8O5u
Thermal Paste Guard: amzn.to/4afVFl2
Storage: amzn.to/4hcu9Hi
Fans: amzn.to/4aeNgyj
Keyboard: amzn.to/3WiIry7
Mouse: amzn.to/3WhOzqy
Monitor: amzn.to/4e7IIu7
UK Amazon Links:
Case: not available
Case (alternative): amzn.to/4ahHgVE
CPU: amzn.to/42aSFV5
GPU: amzn.to/4jdmQRx
RAM: amzn.to/4j8tJnd
MOBO: amzn.to/4267xnL
PSU: Coming Soon
24pin Strimer - amzn.to/3WiBJIt
12VHPWR Strimer - amzn.to/4jeO4Ht
Cooler: amzn.to/3C6cjqM
Thermal Paste: amzn.to/4afWcU4
Thermal Paste Guard: amzn.to/3CiAD8G
Storage: amzn.to/409gREJ
Fans (alternative): amzn.to/3E3h1pyย ย
Keyboard (alternative): amzn.to/3C76nh8ย ย
Mouse: amzn.to/4j51LJ7
Monitor: amzn.to/4778eh2
As an Amazon Associate, I may earn from qualifying purchases.
Lian Li seem to be constantly pushing the boundaries of innovation in the PC DIY space and it's commendable. Not only do their products fulfil the needs of many, the quality and attention to detail always shines through.
As a car enthusiast, I freaking adore the Lian Li x Lamborghini collaboration and I hope to see more of this through 2025!
Read our full writeup here:
mrmattlee.com/post/lianliedge
Could you see yourself with the new EDGE Gold Power Supply, or the O11 Evo Lambo case?? Let's chat in the comments!
Special thanks to โโ @LIANLIHQ for supporting this project.
---------------------------------------------------------------
Subscribe to my 2nd Channel for more! @MrMattLeeV2
---------------------------------------------------------------
โโ BUY ME A COFFEE! โโ
Show you support for the channel. Bonus - get a shout out in the next video! No subscription or sign-up required!
buymeacoffee.com/MrMattLee
---------------------------------------------------------------
Please like and subscribe if you want to see more content like this, also follow the link below to my Instagram where you will find the photoshoot pictures and lots more like-minded content :D
----------------------------------------------------------------
Find me on socials:
instagram.com/mr_matt_lee
twitter.com/mr_matt_lee
facebook.com/MrMatthewLee
Timecodes, though I don't recommend skipping for visual narrative reasons!
00:00 - Nine Days of Deliveries
01:03 - Seasonic X Noctua First Look
02:55 - Build Hardware
03:31 - Motherboard Assembly
05:29 - TUF Gaming GT502 Assembly
05:59 - Mistakes Were Made
06:39 - NH-D12L Enters The Chat
09:40 - Airflow Visualization
10:06 - Cinematic & Desk Setup
12:12 - Coffee Thanks & Outtakes
One of the weakest links with building quiet PC's in the past has been the PSU. Whilst power supplies don't typically make constant noise anyway, when focussing on a system designed to be as quiet as physically possible, the Seasonic X Noctua PRIME TX really comes into its own.
With 1600W available on tap, it's massively overpowered for this build specifically, but that can only work in its advantage by keeping the fan (where applicable) at it's lowest possible speed.
Seasonic and Noctua have done a great job of both the colours and the included cables, bringing in just the right amount of Noctua colour branding without feeling overpowering.
Final conclusion following build hardware list:
Main parts included in the build:
(USA Amazon)
Case: amzn.to/4jhkRfh
CPU: amzn.to/422qQhO
CPU (alternative): amzn.to/3Poo52Q
GPU: amzn.to/4abJsxS
RAM: amzn.to/4fJFHAI
MOBO: amzn.to/3PoZn2i
PSU: Coming Soon
Cooler: amzn.to/3PjwIeW
Storage: amzn.to/421HbDh
Fans: amzn.to/3DGXN9b
Vertical Mount: amzn.to/3DEAtc5
Keyboard: Drop x Noctua
Mouse: amzn.to/421Hm1p
Monitor: amzn.to/4e7IIu7
Lights used to film this video:
Godox UL150ii - amzn.to/3kVOwka
Godox UL60 - amzn.to/3Ymetb2
Main parts included in the build:
(UK Amazon)
Case: amzn.to/3BWbJvt
CPU (alternative): amzn.to/4gFLZTo
GPU: amzn.to/41ZmbwO
RAM: amzn.to/4221q3Q
MOBO: amzn.to/3BYD4x7
PSU: Coming Soon
Cooler: amzn.to/3BWbWif
Storage: amzn.to/4abKlGI
Fans: amzn.to/4g0Scbv
Vertical Mount: amzn.to/3C7YS9w
Keyboard: Drop X Noctua
Mouse: amzn.to/4h2d82x
Monitor: amzn.to/4778eh2
Lights used to film this video:
Godox UL150ii - amzn.to/3wUWFIx
Godox UL60 - amzn.to/3xaH6N7
When building a PC to focus on being as quiet as physically possible, this one really hit the sweet spot. Plenty of airflow, basically inaudible fans and a choice aesthetic... I can't deny this one is ideal for me!
It's a shame the new NH-D15 G2 wouldn't quite fit, but, we make those mistakes so you don't have to!
What's your thoughts on this build? Let's chat in the comments!
Read the complete build writeup here:
mrmattlee.com/post/seasonicprimetx-1600noctuaedition
---------------------------------------------------------------
Subscribe to my 2nd Channel for more! @MrMattLeeV2
---------------------------------------------------------------
โโ BUY ME A COFFEE! โโ
Show you support for the channel. Bonus - get a shout out in the next video! No subscription or sign-up required!
buymeacoffee.com/MrMattLee
---------------------------------------------------------------
Please like and subscribe if you want to see more content like this, also follow the link below to my Instagram where you will find the photoshoot pictures and lots more like-minded content :D
----------------------------------------------------------------
Find me on socials:
instagram.com/mr_matt_lee
twitter.com/mr_matt_lee
facebook.com/MrMatthewLee
Timecodes, though I don't recommend skipping for visual narrative reasons! (Quality headphones or speakers recommended throughout)
00:00 - It's been a journey
01:50 - NZXT H5 Flow
04:12 - Fractal Design Torrent
06:56 - Lian Li SUP-01
09:18 - Dan Cases A3 Wood Edition
11:29 - TRYX Luca / Panorama
14:46 - Deepcool CH160
16:45 - Fractal Design North
18:37 - TUF Gaming GT302
20:54 - Montech Sky Two GX
23:01 - Thermaltake The Tower 300
25:09 - NZXT H7 Flow
27:34 - ASUS BTF Trio
30:32 - Custom Transformers One Build
32:35 - Lian Li O11 Vision Compact
34:59 - ASUSFest GT302 Custom Mod
37:23 - Cooler Master Masterbox 600
39:49 - ProArt PA602 Wood Edition
41:53 - Antec Flux
44:37 - Gear Seekers King 95 Ultra
47:00 - MiniNeo S300 ITX
48:59 - TUF Gaming BTF All White
51:05 - Jonsbo TK-2
53:16 - Dan Cases A3 White
55:11 - Cooler Master TD500 Max
57:30 - ASUS A21 BTF
59:36 - Thanks!
Need PC build inspiration? A playlist of music to relax or drive with? Maybe just came to enjoy the ride? Either way, 2024 has been an absolute blast. Thanks so much for all of the ongoing support, let's make 2025 even better!
Which of the PC builds featured in this video stood out the most for you? Let me know in the comments!
All of the featured videos can be found on the Mr Matt Lee channel using the links below, also if you need to know the hardware used for every build, or fancy replicating one for yourself... Make sure check the description for each video for the product links!
Final conclusion and temperatures following build hardware list:
Featured Videos:
NZXT H5 Flow
youtu.be/6-1-cIwHiQc
Fractal Design Torrent Nano
youtu.be/ySKkJugQg8A
Lian Li SUP-01
youtu.be/ic5OQKfpzo8
Dan Cases A3 Wood Edition
youtu.be/eOXGxrwNmsc
TRYX Luca / Panorama
youtu.be/T77djJUtqKk
Deepcool CH160
youtu.be/ipp8LenWMv8
Fractal Design North
youtu.be/tGO7wo_2Chc
TUF Gaming GT302
youtu.be/hOnFYt20TH0
Montech Sky Two GX
youtu.be/yx-rLZO18Kw
Thermaltake The Tower 300
youtu.be/3yV_j2GAKp0
NZXT H7 Flow
youtu.be/OM85rZwB0vs
ASUS BTF Trio
youtu.be/CzYzS9ZGLO0
Custom Transformers One Build
youtu.be/px434DDUKTA
Lian Li O11 Vision Compact
youtu.be/RvXgFSvb0Ek
ASUSFest GT302 Custom Mod
youtu.be/HMtyJUfVXm0
Cooler Master Masterbox 600
youtu.be/mc0YfH2ui5A
ProArt PA602 Wood Edition
youtu.be/6x1y6OOiEcs
Antec Flux
youtu.be/fkvR5fqkwSk
Gear Seekers King 95 Ultra
youtu.be/eia1vpoRDdo
MiniNeo S300 ITX
youtu.be/AnF2HC_HSOg
TUF Gaming BTF All White
youtu.be/giaAPem7ihA
Jonsbo TK-2
youtu.be/HGWaGWo6Zt0
Dan Cases A3 White
youtu.be/71BZ9Bhqy7o
Cooler Master TD500 Max
youtu.be/dyKnhvYZ66k
ASUS A21 BTF
youtu.be/8tOFqHx282k
---------------------------------------------------------------
Subscribe to my 2nd Channel for more! @MrMattLeeV2
---------------------------------------------------------------
โโ BUY ME A COFFEE! โโ
Show you support for the channel. Bonus - get a shout out in the next video! No subscription or sign-up required!
buymeacoffee.com/MrMattLee
---------------------------------------------------------------
Please like and subscribe if you want to see more content like this, also follow the link below to my Instagram where you will find the photoshoot pictures and lots more like-minded content :D
----------------------------------------------------------------
Find me on socials:
instagram.com/mr_matt_lee
twitter.com/mr_matt_lee
facebook.com/MrMatthewLee
๐ ๐ฃ๐ ๐๐ถ๐๐ฒ๐ฎ๐๐ฎ๐ ๐ฑ๐ฒ๐๐ฎ๐ถ๐น๐ ๐ฐ๐ฎ๐ป ๐ฏ๐ฒ ๐ณ๐ผ๐๐ป๐ฑ ๐ฏ๐ฒ๐น๐ผ๐ ๐๐ต๐ฒ ๐ต๐ฎ๐ฟ๐ฑ๐๐ฎ๐ฟ๐ฒ ๐น๐ถ๐ป๐ธ๐ ๐
Timecodes, though I don't recommend skipping for visual narrative reasons! (Quality headphones or speakers recommended throughout)
00:00 - Intro / A Note From Santa
00:56 - Unwrapping the dream
02:06 - Build Hardware
02:34 - Motherboard Assembly
04:45 - TUF Gaming GT302 Assembly
07:09 - Airflow Visualization
07:28 - Cinematic & Desk Setup
09:25 - Coffee Thanks & Outtakes
AMD have been absolutely crushing it with their X3D chips. You bet I was stoked when ASUS UK approached me to ask if I wanted to team up with them and AMD to give away a high end PC. I even got to choose all of the hardware which was freaking awesome!
The TUF Gaming GT302 case is one of the best performing airflow cases of the last year. Paired up with the Strix LC III 360, there's no cap on how far you can push the 9800X3D. This All AMD build totally rips!
Final conclusion following build hardware list:
USA Amazon Links:
Case: amzn.to/3Pt62Zn
CPU: amzn.to/3DDIHRJ
GPU: amzn.to/3Pckl40
RAM: amzn.to/4h5lab9
MOBO: amzn.to/49Q2vxq
PSU (alternative): amzn.to/3VTxTWa
Cooler: amzn.to/3VPHDAC
Storage: amzn.to/3VQgopG
Keyboard: amzn.to/3VOT6At
Mouse: amzn.to/3BILgBA
Lava Lamp: amzn.to/3VLdYbB
Monitor: amzn.to/4e7IIu7
UK Amazon Links:
Case: amzn.to/3BvJBzj
CPU: not available
CPU (alternative): amzn.to/4fLDtRD
GPU: amzn.to/3ZQfFGc
RAM: amzn.to/41KWXlW
MOBO: amzn.to/4fwIe1h
PSU (alternative): amzn.to/3VSNViVย ย
Cooler: amzn.to/4iLVrGc
Storage: amzn.to/3ZNTtML
Keyboard: amzn.to/3BCpboj
Mouse: amzn.to/4gIy7Hx
Lava Lamp: amzn.to/4fB2crn
Monitor: amzn.to/4778eh2
As an Amazon Associate, I may earn from qualifying purchases.
๐๐ So, you want to WIN this PC build right? Right!
Entering is simple:
1) Make sure you're subscribed!
2) Leave a comment with your best Christmas Cracker Joke and use the HASHTAG: #LetMeWinMrMatt!
3) Bonus entry - Leave a comment on the blog post: bit.ly/AMDXmasGiveaway
This giveaway is strictly UK only, so please only enter if you're in the United Kingdom. The winner will be selected on 2nd January 2025 and announced in a YouTube Community Post here on the Mr Matt Lee channel and via the Mr Matt Lee Instagram page @Mr_Matt_Lee. If you receive comments, or messages from anybody else imitating Mr Matt Lee claiming you've won, it's likely to be a scam. Please be vigilant, I would never reply to a comment to announce a winner or request money from anybody.
We will have more upcoming giveaways including worldwide so please hang tight for those :D
Special thanks to ASUS, AMD and Kingston Technology for supporting this project and allowing me to give back to the community.
Happy Christmas One and All!
---------------------------------------------------------------
Subscribe to my 2nd Channel for more! @MrMattLeeV2
---------------------------------------------------------------
โโ BUY ME A COFFEE! โโ
Show you support for the channel. Bonus - get a shout out in the next video! No subscription or sign-up required!
buymeacoffee.com/MrMattLee
---------------------------------------------------------------
Please like and subscribe if you want to see more content like this, also follow the link below to my Instagram where you will find the photoshoot pictures and lots more like-minded content :D
----------------------------------------------------------------
Find me on socials:
instagram.com/mr_matt_lee
twitter.com/mr_matt_lee
facebook.com/MrMatthewLee
Timecodes, though I don't recommend skipping for visual narrative reasons! (Quality headphones or speakers recommended throughout)
00:00 - Intro: A Package Arrives
01:30 - UNI FAN TL Wireless First Look
02:20 - Build Hardware
02:54 - Motherboard Assembly
04:52 - O11 Vision Compact Assembly
08:15 - Airflow Visualization
08:40 - Cinematic & Desk Setup
10:52 - Coffee Thanks & Outtakes
It goes without saying that Lian Li have some of the best PC case fans on the market right now. The new TL wireless tick all the right boxes for those looking for aesthetic focussed with LCD screens, or pure performance with the standard LED versions.
Much the same as the previous SL fans, the signal is transmitted to and from the fans utilising wireless senders and receivers. The result is less cables, no oversized control boxes along with a simplified installation process.
The performance is exactly as we'd come to expect from Lian Li, with the fans running smoothly, quietly and moving loads of air at the same time. The L-Connect3 software makes the setup easy and straightforward too.
Building with the O11 Vision Compact with a radiator on the top this time was a great time too. Whilst some compromises must be made, such as only a single fan on the rear, the smaller size houses the hardware perfectly and that's something we love to see!
Final conclusion following build hardware list:
USA Amazon Links:
Case: amzn.to/3OTmZM1
CPU: amzn.to/3VG16nd
GPU: amzn.to/4gzpGy4
GPU (alternative): amzn.to/4ge0E7U
RAM: amzn.to/3OQOi9X
MOBO: amzn.to/3ZSazdQ
PSU: amzn.to/49DdH07
Cooler (alternative): amzn.to/3VDRGbM
Fans: Coming Soon
Storage (Kingston Fury): amzn.to/3BeFgAs
Storage (Kingston KC3000): amzn.to/4fmredQ
Keyboard: not available
Mouse: amzn.to/4gbTuRK
Monitor: amzn.to/4e7IIu7
UK Amazon Links:
Case: amzn.to/4gyxct7
CPU: amzn.to/49IdR6I
GPU: amzn.to/4g8Z7A0
GPU (alternative): amzn.to/3ZxtwkC
RAM: amzn.to/49zGW40
MOBO: amzn.to/3OTFxf6
PSU: amzn.to/49zjZho
Cooler (alternative): amzn.to/3VEvD4R
Fans: Coming Soon
Storage (Kinston Fury): amzn.to/3ZRgxvk
Storage (Kingston KC3000): amzn.to/4ff6Xa6
Keyboard: not available
Mouse: amzn.to/41sgOWQ
Monitor: amzn.to/4778eh2
As an Amazon Associate, I may earn from qualifying purchases.
The Lian Li UNI FAN TL Wireless are some of my favourite PC fans this year. Not only does the LED lighting feel well diffused and easy to control, the LCD screens are a nice addition too. As for the O11 Vision Compact, well, it's one of the most popular dual chamber cases of 2024 for a reason.
It's amazing to keep seeing Lian Li grow from strength to strength with their product lines. Once again, they continue to push the boundaries with innovation in PC Gaming Tech.
Read our full writeup here:
mrmattlee.com/post/unifantlwireless
Could you see yourself with the new O11 Vision Compact or TL Wireless fans?? Let's chat in the comments!
Special thanks to โโ @LIANLIHQ for supporting this project.
---------------------------------------------------------------
Subscribe to my 2nd Channel for more! @MrMattLeeV2
---------------------------------------------------------------
โโ BUY ME A COFFEE! โโ
Show you support for the channel. Bonus - get a shout out in the next video! No subscription or sign-up required!
buymeacoffee.com/MrMattLee
---------------------------------------------------------------
Please like and subscribe if you want to see more content like this, also follow the link below to my Instagram where you will find the photoshoot pictures and lots more like-minded content :D
----------------------------------------------------------------
Find me on socials:
instagram.com/mr_matt_lee
twitter.com/mr_matt_lee
facebook.com/MrMatthewLee
Timecodes, though I don't recommend skipping for visual narrative reasons! (Quality headphones or speakers recommended throughout)
00:00 - Intro
00:38 - ProArt PA602 Wood Edition
01:55 - Lian Li O11 Vision Chrome
03:21 - Dan Cases A3 Wood Edition
05:04 - Cooler Master TD500 MAX
06:38 - Lian Li SUP-01
07:48 - Jonsbo Z20
09:37 - Zalman P30
10:58 - BTF (Back Connect)
12:29 - Arctic Liquid Freezer III
14:07 - Noctua NH-D15 G2
15:58 - TRYX Panorama
17:25 - TUF Gaming PSU's
19:05 - Matts Picks for ITX, MATX & ATX
20:58 - To summarise
It wouldn't feel like the end of the year without a channel roundup. From the launch of the ProArt PA602 back in January, right through to the most recent TRYX launches, it's been another really exciting year getting hands on with some of the industries finest offerings.
If you had to choose one of the builds featured in this video, which would it be and why? Let me know in the comments!
Links to all of the cases and hardware featured can be found below, also if you need to know the hardware used for every build, make sure you are subscribed to the channel, and take a look back through previous uploads to find them.
Final conclusion and temperatures following build hardware list:
PC Cases & Hardware Featured
(USA Amazon)
ProArt PA602 (standard edition) - amzn.to/3OKnEzd
Lian Li O11 Vision Chrome - amzn.to/3D9K8HG
Dan Cases A3 Wood Edition - amzn.to/3VucEde
Cooler Master TD500 MAX - amzn.to/3OLBkKp
Lian Li SUP-01 - amzn.to/3BlAW26
Jonsbo Z20 - amzn.to/3ZJ3hsz
Jonsbo TK1 - amzn.to/3ZJ3jAH
Zalman P30 - not available
Prime AP201 - amzn.to/4gnRLIL
Fractal North (black) - out of stock
TUF Gaming Z790-BTF- amzn.to/3VxuiwO
TUF Gaming RTX 4070Ti Super BTF - amzn.to/3B6ZI6g
ROG Maximus Z790 Hero BTF - amzn.to/3BaKVYe
ROG Strix RTX 4090 BTF - amzn.to/41tg5Vh
Arctic Liquid Freezer III 360 - amzn.to/4ipSGdu
Noctua NH-D15 G2 - amzn.to/49AvQf9
TRYX Panorama - amzn.to/49uv9nE
TUF Gaming 850w - amzn.to/3ZjN37W
TUF Gaming 1000w - amzn.to/49K82Wt
PC Cases Featured
(UK Amazon)
ProArt PA602 Standard Edition - amzn.to/4gnS5qX
Lian Li O11 Vision Chrome - amzn.to/3VrefQYv
Dan Cases A3 - amzn.to/49uvqqG
Cooler Master TD500 MAX - not available
Lian Li SUP-01 - amzn.to/4gh8cqe
Jonsbo Z20 - amzn.to/4g6eYPP
Jonsbo TK1 - amzn.to/4gkk9Mp
Zalman P30 - not available
Prime AP201 - amzn.to/49x6XRI
Fractal North (black) - amzn.to/4g54Qab
TUF Gaming Z790-BTF - amzn.to/49uvEOy
TUF Gaming RTX 4070Ti Super BTF - amzn.to/3ZqT1E3
ROG Maximus Z790 Hero BTF - amzn.to/3ZqKRLN
ROG Strix RTX 4090 BTF - amzn.to/3BmOEls
Arctic Liquid Freezer III 360 - amzn.to/41wtaNs
Noctua NH-D15 G2 - amzn.to/41jFHUC
TRYX Panorama - amzn.to/4gsDpXl
TUF Gaming 850w - amzn.to/3ZqT96v
TUF Gaming 1000w - amzn.to/49x74wC
As an Amazon Associate, I may earn from qualifying purchases.
---------------------------------------------------------------
Subscribe to my 2nd Channel for more! @MrMattLeeV2
---------------------------------------------------------------
โโ BUY ME A COFFEE! โโ
Show you support for the channel. Bonus - get a shout out in the next video! No subscription or sign-up required!
buymeacoffee.com/MrMattLee
---------------------------------------------------------------
Please like and subscribe if you want to see more content like this, also follow the link below to my Instagram where you will find the photoshoot pictures and lots more like-minded content :D
----------------------------------------------------------------
Find me on socials:
instagram.com/mr_matt_lee
twitter.com/mr_matt_lee
facebook.com/MrMatthewLee
Timecodes, though I don't recommend skipping for visual narrative reasons!
00:00 - The Build, Explained.
01:53 - Build Hardware
02:24 - Motherboard Assembly
04:14 - Dan Cases A3 Wood Assembly
08:05 - Airflow Visualization
08:33 - Cinematic & Desk Setup
10:30 - Coffee Thanks & Bloopers
Since its launch earlier this year, the Dan Cases A3 has rapidly become one of the most popular Micro ATX cases currently on the market, and that's for good reason! The wood edition brings that extra touch of character whilst also opening up the front panel for more airflow, which is a welcomed addition for extra PSU ventilation that's for sure.
The Walnut wood on the front panel of the A3 is well finished with clear attention to detail, including a removable dust filter which is nice to see. As for the hardware, it's very much exactly the same support as previous A3 cases.
Building this PC with three budget levels in mind was a fun approach. More often than not, changing GPU's between 4060 and 4080 Super for example would come at the cost of varying sizes, but with this setup the aesthetic simply won't change.
The SCYTHE Mugen 5 Rev C is a wonderful air cooler, combined with their Kaze Flex fans which are capable of some serious airflow power once they start ramping up too! Scythe have always crushed it with their cooling support and it's a pleasure to revisit this tower once again.
Final conclusion following build hardware list:
Main parts included in the build:
(USA Amazon)
Case: amzn.to/3Z5kdbe
A3 Glass Panel: amzn.to/3B8Ud6O
CPU (i7 14700K): amzn.to/4i2MVSP
CPU (i5 14600K): amzn.to/3CNWMvF
CPU (i5 14400F): amzn.to/3BaYMxr
GPU (RTX 4080 Super): amzn.to/3ZmIACt
GPU (RTX 4070 Super): amzn.to/3VdeX4b
GPU (RTX 4060): amzn.to/3AYeQCJ
RAM: amzn.to/3ZnfKC7
MOBO: amzn.to/3V61lYs
PSU (850w): amzn.to/3ZrPs1O
PSU (750w): amzn.to/4fGj80H
Cooler (alternative): amzn.to/4eN9zf1
Fans: amzn.to/3Orropb
Storage (alternative): amzn.to/3VaoZTJ
Mouse: amzn.to/41aBpi3
Headset Stand: amzn.to/3Vhtb4d
Wooden Wrist Rest: amzn.to/4fMkAi0
Monitor: amzn.to/4e7IIu7
Main parts included in the build:
(UK Amazon)
Case: coming soon
A3 Glass Panel: not available
CPU (i7 14700K): amzn.to/3COQk7O
CPU (i5 14600K): amzn.to/4i8NZV6
CPU (i5 14400F): amzn.to/4i7JJoX
GPU (RTX 4080 Super): amzn.to/3APU8Fc
GPU (RTX 4070 Super): amzn.to/3V9G7sB
GPU (RTX 4060): amzn.to/3CHe6Cm
RAM (alternative): amzn.to/3CI2dfzย ย
MOBO: amzn.to/499MC4L
PSU (850w): amzn.to/3ZncRkF
PSU (750w): amzn.to/3Z8dn4F
Cooler: amzn.to/496njQK
Fans: amzn.to/49d0Amc
Storage: amzn.to/4eSFPxt
Mouse: amzn.to/4fRqrTf
Headset Stand: amzn.to/3BdCQBO
Wooden Wrist Rest: amzn.to/41hMzl8
Monitor: amzn.to/4778eh2
The Dan Cases A3 wood edition is without a doubt a stunning case from every angle. With a mesh side panel as standard airflow is plentiful, but for those seeking more aesthetics, there's also a glass side panel you can purchase as an optional extra which is great to see!
Which version do you prefer?
Read the complete build writeup here:
mrmattlee.com/post/lianlia3wood
Could you see yourself with the Lian Li A3 Wood edition? Let's chat in the comments!
---------------------------------------------------------------
Subscribe to my 2nd Channel for more! @MrMattLeeV2
---------------------------------------------------------------
โโ BUY ME A COFFEE! โโ
Show you support for the channel. Bonus - get a shout out in the next video! No subscription or sign-up required!
buymeacoffee.com/MrMattLee
---------------------------------------------------------------
Please like and subscribe if you want to see more content like this, also follow the link below to my Instagram where you will find the photoshoot pictures and lots more like-minded content :D
----------------------------------------------------------------
Find me on socials:
instagram.com/mr_matt_lee
twitter.com/mr_matt_lee
facebook.com/MrMatthewLee
Timecodes, though I don't recommend skipping for visual narrative reasons!
00:00 - A box, or Cat House?
00:49 - TRYX Luca L70 Overview
02:00 - Build Hardware
02:29 - Motherboard Assembly
03:43 - TRYX Panorama Installation
04:31 - TRYX Luca L70 Assembly
08:02 - Airflow Visualization
08:30 - Cinematic & Desk Setup
11:31 - Coffee Thanks & Bloopers
I went into this build with zero expectations, although aware that there had been quite a lot of negative comments from various media regarding the Luca L70 chassis. With that said, taking a completely uninfluenced approach, I had very few bad things to say about either, if any.
The Panorama Curved AMOLED AIO is without a doubt one of the more unique coolers seen for quite some time. The 3D effect from the curved screen gets you transfixed, watching your animations seemingly jumping out at you. The Kanali software made setting up really easy, allowing for GIFS, MP4, JPEG and so many more image formats to immediately appear. Keeping the new RYZEN 7 9800X3D cool didn't take much effort either, even with the pump RPM and fan speeds set below 50%.
Luca L70 is undoubtedly a titan case with airflow in mind. Able to support up to EATX with two 420mm radiators simultaneously, this one will be aimed at those seeking only top levels of cooling whilst offering excellent panoramic views inside too. The Luca L70 brings its own flare of design language, pushing in the direction of a space-like futuristic theme which I love!
Final conclusion following build hardware list:
Main parts included in the build:
(USA Amazon)
Case: Coming Soon
CPU: Not Available
CPU (alternative): amzn.to/3ZuXuqJ
GPU: amzn.to/3AVP1Dd
RAM: amzn.to/4fITYP8
MOBO: amzn.to/4fH8lmO
PSU: amzn.to/4hZ7NKL
Cooler (240mm): amzn.to/3V4rzdU
Fans (Noctua): amzn.to/3ZgwXwZ
Fans (TRYX): amzn.to/495a9nh
Storage: amzn.to/4fZX54R
Keyboard (alternative): amzn.to/492Nl7y
Mouse: amzn.to/3Z5YsIe
Monitor: amzn.to/4e7IIu7
Main parts included in the build:
(UK Amazon)
Case: Coming Soon
CPU: Not Available
CPU (alternative): amzn.to/3CHSqpO
GPU: amzn.to/4g1rXBX
RAM: amzn.to/4i3SoJe
MOBO: amzn.to/414daSL
PSU: amzn.to/410i3fN
Cooler: amzn.to/3CD5Kf0
Fans (Noctua): amzn.to/40ZR180
Fans (TRYX): amzn.to/4i2pVTN
Storage: amzn.to/3V6JuRg
Keyboard (alternative): amzn.to/4i3zEcDย ย
Mouse: amzn.to/3CJYYnV
Monitor: amzn.to/4778eh2
When a new brand enters this space with something unique, it's always an exciting time to get hands on and explore their first offerings. Whilst the Luca L70 case isn't 'perfect' (what is really?) it's a solid first step into case manufacturing and we're excited to see where things lead.
As for the Panorama 360 AIO. It's one of the most popular and talked about coolers of 2024 for good reason. Personalisation, effortless installation and a host of excellent features make this a no-brainer for those conscious of aesthetics (You'll need deep pockets mind!)
Read the complete build writeup here:
mrmattlee.com/post/tryxpanorama
Could you see yourself with the Luca L70 or Panorama AIO? Let's chat in the comments!
Fun fact, Matt made the smoke animation himself in the studio. Want to attach it to your own TRYX Panorama? Download here:
bit.ly/TRYXPano
---------------------------------------------------------------
Subscribe to my 2nd Channel for more! @MrMattLeeV2
---------------------------------------------------------------
โโ BUY ME A COFFEE! โโ
Show you support for the channel. Bonus - get a shout out in the next video! No subscription or sign-up required!
buymeacoffee.com/MrMattLee
---------------------------------------------------------------
Please like and subscribe if you want to see more content like this, also follow the link below to my Instagram where you will find the photoshoot pictures and lots more like-minded content :D
----------------------------------------------------------------
Find me on socials:
instagram.com/mr_matt_lee
twitter.com/mr_matt_lee
facebook.com/MrMatthewLee
Timecodes, though I don't recommend skipping for visual narrative reasons!
00:00 - A little bit of context...
01:30 - Space Marine RX 7900 XTX Unboxing
03:52 - Plastic Peels / Feels
04:20 - Space Marine RX 7900 XTX First Look
05:04 - The Dream PC Build Cinematic
06:55 - Closing Thoughts / Dear Henry Cavill...
It goes without saying that this video was a real pleasure to make. I recall reaching out to ASUS around GamesCom 2024 to see if it would be possible to get one of these graphics cards in the studio, but that was quickly denied due to rarity. The search never really ended, but eventually I found myself here! Sure, there's a large hole in the wallet, but totally justified!
Whilst the performance doesn't differ from the original TUF Gaming GPU, The Space Marine 2 7900 XTX is without a doubt one of the best looking graphics cards I've had the pleasure of owning. Hopefully the video brings justice to the design language and overall colour theme. That gold heatsink in person is so visually striking... It's hard to explain!
Love the look of the PC build? Here's the Amazon links to get you as close as possible!
(USA Amazon)
Case: amzn.to/48URzOx
CPU: amzn.to/3YPSCLc
GPU: - Good Luck With That
GPU (alternative): amzn.to/3CxRcNW
RAM: amzn.to/3Z7egfb
MOBO: amzn.to/4hTzcNW
PSU: amzn.to/3CxRzYQ
Cooler (alternative): amzn.to/3Z9zhWIย ย
Fans (Noctua): amzn.to/40P2lDS
Fans (Lian Li): amzn.to/3Cs3cAi
Storage: amzn.to/3YJZMQQ
Keyboard (alternative): amzn.to/3YQfVV2
Mouse: amzn.to/3ObmT1X
Monitor: amzn.to/4e7IIu7
(UK Amazon)
Case: amzn.to/3ZaK4j6
CPU: amzn.to/3CqkFco
GPU: - Good Luck With That
GPU (alternative): amzn.to/3ZaKjL2
RAM: amzn.to/3YQzAUW
MOBO: amzn.to/40RW2Q2
PSU: amzn.to/40PoGS3
Cooler (alternative): amzn.to/3Cs3Spk
Fans (Noctua): amzn.to/3ALmOPo
Fans (Lian Li): amzn.to/4hQlpaW
Storage: amzn.to/3CwKVlD
Keyboard (alternative): amzn.to/3YLTXm6ย ย
Mouse: amzn.to/3AK94EC
Monitor: amzn.to/4778eh2
As an Amazon Associate, I may earn from qualifying purchases.
The chances of finding another one of these graphics cards out in the wold is certainly slim, but should one ever appear then I'd suggest you snap it up right away! You don't have to love Warhammer 40K to appreciate the design language and details which have gone into this, leading to a worthy investment both visually and from a performance perspective.
What's your thoughts on this graphics card? Have you played Space Marine 2 yet?! Let's talk in the comments!
๐ฅ๐๐๐ ๐ผ๐๐ฟ ๐ณ๐๐น๐น ๐๐ฟ๐ถ๐๐ฒ ๐๐ฝ ๐ผ๐ป ๐๐ต๐ถ๐ ๐๐ฟ๐ฎ๐ฝ๐ต๐ถ๐ฐ๐ ๐๐ฎ๐ฟ๐ฑ ๐ฎ๐ป๐ฑ ๐๐๐ถ๐น๐ฑ ๐ต๐ฒ๐ฟ๐ฒ:
mrmattlee.com/post/rx7900xtxspacemarine2
---------------------------------------------------------------
Subscribe to my 2nd Channel for more! @MrMattLeeV2
---------------------------------------------------------------
โโ BUY ME A COFFEE! โโ
Show you support for the channel. Bonus - get a shout out in the next video! No subscription or sign-up required!
buymeacoffee.com/MrMattLee
----------------------------------------------------------------
Find me on socials:
instagram.com/mr_matt_lee
twitter.com/mr_matt_lee
facebook.com/MrMatthewLee
twitter.com/mr_matt_lee
facebook.com/MrMatthewLee
--------------------------
All of the PC build clips featured here have been taken from other videos on my channel. Please do browse through if something caught your eye to see the full build video and cinematic!
Timecodes, though I don't recommend skipping for visual narrative reasons!
00:00 - Introduction to PC Cooling
01:20 - Air Cooling Roots
02:09 - Common Air Cooler Sizes / Uses
03:15 - How Does a Tower Cooler Work?
04:05 - Heat Pipes, Size & CPU Efficiency
05:15 - What's Inside an Air Cooler?
05:47 - Optimising Airflow & Fan Placement
06:47 - Air Cooling Drawbacks
07:57 - Liquid Cooling Roots
08:55 - Looks & Performance
09:32 - Radiator Sizes Explained
10:55 - What's Inside a Liquid Cooler?
12:06 - Airflow and Radiator Placement
13:02 - TUBES UP? DOWN? Watch This.
14:52 - Liquid AIO Drawbacks
16:47 - Round-up
You could say over the years I've been hands on with a lot of liquid and air coolers. Through that time a lot of knowledge has been obtained with nothing more than hands on experience and a willingness to learn. Time for me to speak on the channel again? Well, it would be rude not too!
There's a lot of reasons to choose either of these two popular cooling solutions for your PC. Both are strong, both have perks and downfalls, the hard reality is that they will both perform admirably assuming that you've purchased parts to compliment the rest of your hardware.
Here's a selection of my personal recommendations for Air and Liquid Cooling in 2024 going into 2025:
(USA Amazon)
My Top Air Coolers (as of November 2024)
Noctua NH-U12A - amzn.to/3O3niUc
Scythe Mugen 6 - amzn.to/4fDELhK
Arctic Freezer 36 - amzn.to/4fCPEjO
Thermalright Phantom Spirit 120 - amzn.to/3CfyLNF
Noctua NH-D15 G2 - amzn.to/4hJbOCJ
ID Cooling IS-67 XT - amzn.to/4fHLJlK
Be Quiet! Dark Rock Elite - amzn.to/3UNq83n
My Top Liquid Coolers
Arctic Liquid Freezer iii - amzn.to/4ex1ifm
NZXT Kraken Elite - amzn.to/4fhZUOT
ROG Ryuo III - amzn.to/3Cjxcyl
Cooler Master PL Flux - amzn.to/3YAG364
EK-Nucleus - amzn.to/4hFi5iV
Lian Li GA II SL-INF - amzn.to/3ClSmMl
ROG Ryujin III - amzn.to/3YYVB59
(UK Amazon)
My Top Air Coolers (as of November 2024)
Noctua NH-U12A - amzn.to/3Z0nJF2
Scythe Mugen 6 - amzn.to/4eqsyft
Arctic Freezer 36 - amzn.to/4er7Rjs
Thermalright Phantom Spirit 120 - amzn.to/3YLrqNq
Noctua NH-D15 G2 - amzn.to/3CxErmf
ID Cooling IS-67 XT - amzn.to/4euTkTD
Be Quiet! Dark Rock Elite - amzn.to/3YZKYyX
My Top Liquid Coolers
Arctic Liquid Freezer iii - amzn.to/4fGXARi
NZXT Kraken Elite - amzn.to/40Aru5k
ROG Ryuo III - amzn.to/40AOFMR
Cooler Master PL Flux - amzn.to/3Clwlgx
EK-Nucleus - amzn.to/4hGdyNe
Lian Li GA II SL-INF - amzn.to/4hG588C
ROG Ryujin III - amzn.to/4fGh3kK
As an Amazon Associate, I may earn from qualifying purchases.
To wrap this up, cooling your CPU doesn't have to be complicated. Take note of what the brand recommends their coolers up to (TDP) and make sure your CPU doesn't exceed it, if it does, it's always best to look for a more efficient option.
What's your thoughts on the points made in this video? Anything you'd do different or explain differently? Let's chat in the comments!
---------------------------------------------------------------
Subscribe to my 2nd Channel for more! @MrMattLeeV2
---------------------------------------------------------------
โโ BUY ME A COFFEE! โโ
Show you support for the channel. Bonus - get a shout out in the next video! No subscription or sign-up required!
buymeacoffee.com/MrMattLee
----------------------------------------------------------------
Find me on socials:
instagram.com/mr_matt_lee
twitter.com/mr_matt_lee
facebook.com/MrMatthewLee
twitter.com/mr_matt_lee
facebook.com/MrMatthewLee
--------------------------
Timecodes, though I don't recommend skipping for visual narrative reasons!
00:00 - Case / Coffee Overview
01:37 - Build Hardware
02:05 - Motherboard Assembly
04:18 - Antec Flux Assembly
07:14 - Airflow Visualization
07:42 - Cinematic & Desk Setup
10:10 - Coffee Thanks & Bloopers
The Antec Flux has been one of the more requested videos on the channel for a few months now. Whilst the 'Pro' version of the case comes with additional valuable features, they didn't really apply here because of the intention to use Noctua etc anyway.
With that said, the Antec Flux is a solid option for those seeking high airflow whilst still retaining a gamer-y style chassis. The ProArt hardware seamlessly blends into the overall theme with this one, carrying those walnut tones through with the gold and brown branding.
Building in the Antec Flux was really straight forward as to be expected with a mid-tower of this style. Where it really shines is with solid hardware support including the option to mount 420mm radiators up front: especially important for creators and designers seeking large amounts of CPU cooling.
Final conclusion following build hardware list:
Main parts included in the build:
(USA Amazon)
Case (Flux Pro): amzn.to/3UADnEo
CPU: amzn.to/4fP4C6D
GPU: amzn.to/3NPDbxv
RAM: amzn.to/4f9B977
MOBO: amzn.to/4fcqKaQ
PSU: amzn.to/40Aa0WD
Cooler: amzn.to/4ekQKzv
Storage: amzn.to/4fxH8m4
Vertical GPU Mount: amzn.to/4faqpFO
Keyboard: amzn.to/3AuNxzF
Mouse: amzn.to/4fbfVpJ
Monitor: amzn.to/4e7IIu7
Lights used to film this video:
Godox UL150ii - amzn.to/3kVOwka
Godox UL60 - amzn.to/3Ymetb2
Main parts included in the build:
(UK Amazon)
Case: amzn.to/4fneXGy
CPU: amzn.to/3C8yRGO
GPU: amzn.to/3UC9AeD
RAM: amzn.to/4ehxyme
MOBO: amzn.to/4huJsw7
PSU: amzn.to/3CbJbhr
Cooler: Coming Soon!
Storage: amzn.to/3As1PB0
Vertical GPU Mount: amzn.to/4fzLdq5
Keyboard: amzn.to/48xHdDY
Mouse: amzn.to/3YAuGLG
Monitor: amzn.to/4778eh2
Lights used to film this video:
Godox UL150ii - amzn.to/3wUWFIx
Godox UL60 - amzn.to/3xaH6N7
The Antec Flux comes in at a respectable $99, with the Pro version quite substantially ahead of this $179. Depending on your style of build, either of the two would be more than sufficient to house current generation and I dare say next generation too. Those walnut accents will always be a winner for me, especially within a blackout theme combined with ProArt hardware of course!
Read the complete build writeup here:
mrmattlee.com/post/antecflux
Could you see yourself with the Antec Flux Chassis? Let's chat in the comments!
---------------------------------------------------------------
Subscribe to my 2nd Channel for more! @MrMattLeeV2
---------------------------------------------------------------
โโ BUY ME A COFFEE! โโ
Show you support for the channel. Bonus - get a shout out in the next video! No subscription or sign-up required!
buymeacoffee.com/MrMattLee
---------------------------------------------------------------
Please like and subscribe if you want to see more content like this, also follow the link below to my Instagram where you will find the photoshoot pictures and lots more like-minded content :D
----------------------------------------------------------------
Find me on socials:
instagram.com/mr_matt_lee
twitter.com/mr_matt_lee
facebook.com/MrMatthewLee
Timecodes, though I don't recommend skipping for visual narrative reasons!
00:00 - A Mysterious Package
01:19 - Choose Your Weapon...
02:00 - ROG Z890 Maximus APEX First Look
02:32 - Build Hardware
02:55 - Motherboard Assembly
04:26 - White ROG Hyperion Assembly
07:21 - Airflow Visualization
07:49 - Cinematic & Desk Setup
09:35 - Coffee Thanks & Bloopers
As 2024 begins to draw to a close, Intel are back with a new socket: welcome the Core Ultra series to the table!
With any new platform comes opportunity to develop and that's exactly where the Core Ultra 9 currently finds it's self. Those seeking mountains more power than the i9 14900K may be disappointed, but make no mistake the 285K has some serious power to be had whilst also consuming less energy and that's a winner.
The ROG Maximus Z890 Apex provides a solid platform to fully utilise every bit of the new CPU's from intel whilst retaining those stylish and sharp design angles. Combined with the RTX 4090 OC, there's really not much which can defeat this one and that's fine with me!
Final conclusion following build hardware list:
Main parts included in the build:
(USA Amazon)
Case: amzn.to/4e1fY63
CPU: Coming Soon
GPU: amzn.to/3C3rXTl
RAM: amzn.to/3Yl2j3N
MOBO: amzn.to/4eZHIJp
PSU: Coming Soon
PSU (alternate): amzn.to/3YEWXlm
Cooler: amzn.to/3YB6ASa
Storage: amzn.to/4eVlIPW
Keyboard: amzn.to/40nmr8a
Mouse: amzn.to/4f0jgrk
Monitor: amzn.to/4e7IIu7
Main parts included in the build:
(UK Amazon)
Case: amzn.to/3BTnulZ
CPU: Coming Soon
GPU: amzn.to/3AasNNz
RAM: amzn.to/3YEYBUi
MOBO: amzn.to/3BXtwC5
PSU: Coming Soon
PSU (alternative): amzn.to/3BXtwC5
Cooler: amzn.to/3YjheM1
Storage: amzn.to/4eZ30Hl
Keyboard: amzn.to/3O2POFD
Mouse: amzn.to/40nmFMy
Monitor: amzn.to/4778eh2
With a new platform comes new challenges and opportunities. Contrary to popular discussion I'm stoked to see Intel bring forward powerful chips with significantly reduced power consumption. This can and will pave the way for less heat in small form factor and greater headroom for future CPU's on the new socket too. What's not to love?
Read the complete build writeup here:
mrmattlee.com/post/rogcoreultra9
Could you see yourself with the new Core Ultra CPU's in your PC? What's your thoughts on the ROG Z890 Maximus Apex? Let's chat in the comments!
Special thanks to @ASUSROGUK & @Intel for supporting this project.
---------------------------------------------------------------
Subscribe to my 2nd Channel for more! @MrMattLeeV2
---------------------------------------------------------------
โโ BUY ME A COFFEE! โโ
Show you support for the channel. Bonus - get a shout out in the next video! No subscription or sign-up required!
buymeacoffee.com/MrMattLee
---------------------------------------------------------------
Please like and subscribe if you want to see more content like this, also follow the link below to my Instagram where you will find the photoshoot pictures and lots more like-minded content :D
----------------------------------------------------------------
Find me on socials:
instagram.com/mr_matt_lee
twitter.com/mr_matt_lee
facebook.com/MrMatthewLee


