A transistor for timekeeping: Inside an early Panasonic clock @Vintage-Tech
A transistor for timekeeping: Inside an early Panasonic clock  @Vintage-Tech
Uploaded September 2025 | Updated November 2026, 3 hours ago
A nice transistor clock from "National" dated 1971 in good working condition complete with its manual and other papers...

A description of how the circuit works below

How the Circuit Works

The mechanism of the clock, often called a transistorised pendulum drive, is a simple and elegant solution for converting a battery's power into continuous motion. The circuit has two main parts: the drive coil and the sense coil. These are typically wound together on a single core, or positioned close to each other.

Sensing the Pendulum: A small permanent magnet is attached to the end of the pendulum. As the pendulum swings through its arc, this magnet passes by the coils. Its movement induces a very small electrical current in the sense coil.  

Activating the Transistor: This small, induced current from the sense coil is sent to the base of the 2SB175 transistor. Think of the base as a gate. This tiny electrical signal is just enough to "open the gate" and switch the transistor on.  

Delivering the Impulse: When the transistor is switched on, it allows a much larger current from the 1.5-volt C-size battery to flow through the drive coil. This current instantly turns the drive coil into an electromagnet.

Giving the "Kick": The magnetic field generated by the drive coil repels the permanent magnet on the pendulum. This repulsion gives the pendulum a small, precise "kick" or impulse. This is just enough to overcome the friction in the clock's gears and the slight energy loss from air resistance, ensuring the pendulum keeps swinging at a consistent rate.  

Circuit Reset: As the pendulum continues its swing, the magnet moves away from the coils. The induced current in the sense coil drops, the transistor turns off, and the current to the drive coil is cut off. The circuit then "waits" for the pendulum to swing back the other way, and the process repeats with each swing.

This entire cycle happens in a fraction of a second, with the transistor acting as a highly efficient, electronic switch that keeps the mechanical pendulum in constant, precise motion. This system allowed clocks to run for a year or more on a single battery.
A transistor for timekeeping: Inside an early Panasonic clockTV to go! 1980s colour portable televisions (Pt 2.)Crestworth Astro Lava Lamp pre production MK0 1963 versionRestored Schaub Lorenz Music Center 5001Philips portable record player playing a warped record...Dynatron TV-32 405 line set from 1957 First LookHubert one day old miniature pony foal sleepingToy Record Player with Direct Drive!A short video of my personal Hi-Fi set up..HMV 157, Pony & Ragamuffin by Barnabas Von Geczy And His Orchestra1930s French carved Oak Clock with Frère Jacques ChimesVU meter replacement on a Ferguson reel to reel
Vintage-Tech (Eddy Norton) |

A transistor for timekeeping: Inside an early Panasonic clock

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER