Uploaded March 2025 | Updated September 2026, 5 days ago
Routers are powerful tools, but when used along the edge of stock, balancing becomes a challenge. Since most of the router's weight hangs off the edge, there's a constant risk of tipping, shifting, or uneven cuts. Enter the Router Anchor. This idea gives you more stability, control, and leverage while routing.
Designed to stabilize your router on edge work, this shifts the center of gravity onto the stock, preventing bumps and ensuring smooth, controlled passes.
If you're using a trim router, instead of spending $25 or more on a store-bought baseplate, we'll make a custom built pad that cost a fraction of the price while having the ability to fit any trim router setup. Whether you're using a full-sized router or a lightweight trim router, these fixtures will eliminate the balancing act and give you more control with your cuts.
"Playlist of all bitesize tips used" → youtube.com/playlist?list=PLEBXNh1Ik9Fl5jsj4RYaeX3M4FyNqlMpD
Attaching plexiglass to the base → youtu.be/MS7Q9RcaNmw?t=492
Step by step instructions/tools/materials → makethingswithrob.com/router-anchor
Become a patron! → patreon.com/makethings ←
Huge thank you to my patrons that keep this thing going!
*MAKER TEAM*
Michelle B
Keith Current
William L McNally
Rich Lightfoot
Tutor the Barbarian
Aubrey G.
Nukebert
Sam W.
Aaron Knows DIY
G. Salazar
David B.
Make Things, Let's Make Things
00:00 Intro
00:22 1. ROUTER ANCHOR
00:25 1.1. Materials
00:49 1.2. Mapping out lines
02:14 1.3. Recessing the plywood
03:13 1.4. Shaping the base
04:03 1.5. Base to baseplate
05:53 1.6. Dowel handle
06:14 1.7. Testing it out
06:52 1.8. Final thoughts
07:16 2. TRIM STYLE ROUTER PLATE
07:27 2.1. Differences and materials
08:54 2.2. Mapping the shape
09:59 2.3. Cutting and shaping
10:32 2.4. Final markings, drillings
13:17 2.5. Assembly & example
14:13 CREDITS
#LetsMakeThings
Routers are powerful tools, but when used along the edge of stock, balancing becomes a challenge. Since most of the router's weight hangs off the edge, there's a constant risk of tipping, shifting, or uneven cuts. Enter the Router Anchor. This idea gives you more stability, control, and leverage while routing.
Designed to stabilize your router on edge work, this shifts the center of gravity onto the stock, preventing bumps and ensuring smooth, controlled passes.
If you're using a trim router, instead of spending $25 or more on a store-bought baseplate, we'll make a custom built pad that cost a fraction of the price while having the ability to fit any trim router setup. Whether you're using a full-sized router or a lightweight trim router, these fixtures will eliminate the balancing act and give you more control with your cuts.
"Playlist of all bitesize tips used" → youtube.com/playlist?list=PLEBXNh1Ik9Fl5jsj4RYaeX3M4FyNqlMpD
Attaching plexiglass to the base → youtu.be/MS7Q9RcaNmw?t=492
Step by step instructions/tools/materials → makethingswithrob.com/router-anchor
Become a patron! → patreon.com/makethings ←
Huge thank you to my patrons that keep this thing going!
*MAKER TEAM*
Michelle B
Keith Current
William L McNally
Rich Lightfoot
Tutor the Barbarian
Aubrey G.
Nukebert
Sam W.
Aaron Knows DIY
G. Salazar
David B.
Make Things, Let's Make Things
00:00 Intro
00:22 1. ROUTER ANCHOR
00:25 1.1. Materials
00:49 1.2. Mapping out lines
02:14 1.3. Recessing the plywood
03:13 1.4. Shaping the base
04:03 1.5. Base to baseplate
05:53 1.6. Dowel handle
06:14 1.7. Testing it out
06:52 1.8. Final thoughts
07:16 2. TRIM STYLE ROUTER PLATE
07:27 2.1. Differences and materials
08:54 2.2. Mapping the shape
09:59 2.3. Cutting and shaping
10:32 2.4. Final markings, drillings
13:17 2.5. Assembly & example
14:13 CREDITS
#LetsMakeThings
