Uploaded September 2026 | Updated November 2026, 4 days ago
wafer.space provides budget silicon manufacturing for the GF180MCU process, starting from just $2,000 for 1,000 dies!
In this talk, we will take a look at the recent wafer.space shuttle runs and the challenges encountered. I will walk you through the journey that your design takes until it arrives at your doorstep, either as bare dies or CoB-packaged parts. Finally, I will provide an outlook on ongoing and future developments.
wafer.space provides budget silicon manufacturing for the GF180MCU process, starting from just $2,000 for 1,000 dies!
In this talk, we will take a look at the recent wafer.space shuttle runs and the challenges encountered. I will walk you through the journey that your design takes until it arrives at your doorstep, either as bare dies or CoB-packaged parts. Finally, I will provide an outlook on ongoing and future developments.

![Custom instruction development and deployment on a RISC-V softcore (Philippos Papaphilippou)
This talk demonstrates the programmability of the Simodense RISC-V
softcore running on an FPGA [1]. The latest experimentation based on Simodense
features runtime reconfigurability. Custom instructions can automatically be
loaded during runtime on demand, using a recently proposed approach called
LUTstructions. LUTstructions are small FPGAs (essentially FPGA-on-FPGA when
running on an FPGA) that are optimised for instruction implementation and fast
reconfiguration [2]. The prototype is entirely written in Verilog and is thus
applicable to a variety of usage scenarios.
[1] Simodense: a RISC-V softcore for custom SIMD instructions (GitHub
repository) https://github.com/pphilippos/simodense
[2] Philippos Papaphilippou LUTstructions: Fast-Reconfigurable FPGA-Based
Instructions (in-press) IEEE/SBC SBAC-PAD 2026 Custom instruction development and deployment on a RISC-V softcore (Philippos Papaphilippou)](https://i.ytimg.com/vi/KMmclf0-Ggg/mqdefault.jpg)








