Uploaded March 2022 | Updated November 2026, 3 hours ago
A video showing the outside, connectors, buttons and everything you might want to know about the ZTE MC801A 5G Router as supplied by Three in 2022.
Shows you what is in the box.
Shows you the manual from Three.
Shows you the manual from ZTE.
Shows you the power supply PSU provided in the box.
Shows you all the lights on the front.
Shows you what is on the bottom of the router and where you put the SIM.
Shows you all the connectors on the back for aerials/antennas (TS-9 / TS9 connector), phone and two Ethernet network sockets.
Other videos:
youtu.be/UmsV6E8__VI - The web admin interface of the router
youtu.be/9Z403LofNtI - How to factory reset the router.
youtu.be/xRcQPQRHpyQ - How to bridge mode the router.
youtu.be/TS-GktnZdVA - What the USB C port on the router does.
A video showing the outside, connectors, buttons and everything you might want to know about the ZTE MC801A 5G Router as supplied by Three in 2022.
Shows you what is in the box.
Shows you the manual from Three.
Shows you the manual from ZTE.
Shows you the power supply PSU provided in the box.
Shows you all the lights on the front.
Shows you what is on the bottom of the router and where you put the SIM.
Shows you all the connectors on the back for aerials/antennas (TS-9 / TS9 connector), phone and two Ethernet network sockets.
Other videos:
youtu.be/UmsV6E8__VI - The web admin interface of the router
youtu.be/9Z403LofNtI - How to factory reset the router.
youtu.be/xRcQPQRHpyQ - How to bridge mode the router.
youtu.be/TS-GktnZdVA - What the USB C port on the router does.




![BT Business Smart Hub 3 (Shipped 2024) device and admin screens.
All the web admin configuration pages of the BT Business Smart Hub 3 (F5394-CP BT) aka. Enterprise SH31B.
Also a brief look at the router hub showing the VDSL/Modem socket, LAN sockets, WAN socket, power button, WPS buttons and USB socket.
00:00 - Introduction.
00:30 - WPS Button Location.
00:43 - Sockets on the back of the router.
02:25 - The Power Supply.
03:55 - Starting up the router for the first time.
07:35 - Logging in to the web admin interface.
09:08 - The Status admin page (firmware version, serial number, uptime etc.).
10:12 - Wireless settings (Turn off 2.4GHz or 5GHz, change name and password, change channels).
13:35 - Manage WiFi Extenders (Halo/Mesh devices).
14:05 - My Network screen showing devices connected to the network.
15:03 - Hybrid Connect.
15:23 - Help screens.
17:00 - Hub light control.
17:17 - Guest WiFi settings.
19:45 - Broadband performance test. (Just links you off site to BT Wholesale speed test website).
20:35 - Broadband settings (PPPoE/PPPoA details)
21:58 - VPN Port Clamping settings.
22:04 - Static Routes.
22:26 - DNS Hosts (DNS overrides)
23:50 - Firewall (Port Forwarding, how to add a port forward example.).
25:08 - Enable WAN ping, UPNP settings.
25:59 - DMZ settings.
27:07 - Multi Static IP settings.
27:55 - IPv4 LAN Settings (IP Address, DHCP Server settings, Subnet mask etc.).
28:58 - Address Table screen (ARP list/DHCP log?)
29:29 - Technical log.
30:39 - Access Control (requires an app, not going to test that.).
30:54 - IPv6 Settings (device pinholes [e.g. allowing a service through like old IPv4 Port Forwarding]).
31:52 - System settings tab (Ping tests, set date and time, change admin password and factory reset the router).
How to factory reset the BT Business Smart Hub 3 - https://youtu.be/039cmYOIojM
What is inside the BT Business Smart Hub 3 - https://youtu.be/7lZTr8oeIuM
A general look at the BT Business Smart Hub 3 including all admin pages - https://youtu.be/hMvzTpdY60k BT Business Smart Hub 3 (Shipped 2024) device and admin screens.](https://i.ytimg.com/vi/hMvzTpdY60k/mqdefault.jpg)





