Blade Attila | A homemade/DIY Amazing Solar Lighter @AttilaBlade | Uploaded May 2018 | Updated October 2024, 7 minutes ago.
Don't forget to check out my 2nd channel @east-europeansmarts 🙏❤️👍
I made a simple solar lighter from a plastic concave parabolic mirror.
It was the lamp mirrored background in a plastic toy car, but that's damaged, so I recreate something useful from that rubbish. :)
I used for this project a plastic parabolic mirror, a spring and a plastic tube between the cigarette and the spring also I used some hot glue.
That's it!
Subscribe and follow my channel: youtube.com/user/bladeattila
Google+: plus.google.com/u/0/+AttilaBlade/posts
Check my heat engine blog: http:manson-ericsson-hae.blogspot.hu
Support my efforts with a simple video sharing please
THANKS!
See You Soon!
BLADE
Don't forget to check out my 2nd channel @east-europeansmarts 🙏❤️👍
I made a simple solar lighter from a plastic concave parabolic mirror.
It was the lamp mirrored background in a plastic toy car, but that's damaged, so I recreate something useful from that rubbish. :)
I used for this project a plastic parabolic mirror, a spring and a plastic tube between the cigarette and the spring also I used some hot glue.
That's it!
Subscribe and follow my channel: youtube.com/user/bladeattila
Google+: plus.google.com/u/0/+AttilaBlade/posts
Check my heat engine blog: http:manson-ericsson-hae.blogspot.hu
Support my efforts with a simple video sharing please
THANKS!
See You Soon!
BLADE
![[TUTORIAL] Free Piston Stirling Engine /NASA type/ - 2020 Updated version disassembling](https://i.ytimg.com/vi/iAu4as9fRNo/hqdefault.jpg "[TUTORIAL] Free Piston Stirling Engine /NASA type/ - 2020 Updated version disassembling
#stirlingengine, #stirling, #freepiston, #tutorial, #DIY, #homemade, #cheapandeasy, #howtomake, #easytobuild
[TUTORIAL] Free Piston Stirling Engine /NASA type/ - 2020 Updated version disassembling
Dont forget to check out my 2nd channel @east-europeansmarts 🙏❤️👍
Do you want more infos about my work? 🔥Join my channel as a MEMBER via my community section! https://www.youtube.com/c/AttilaBlade/community Check it out!
If you dont want to be a member but you would like to support my efforts dont hesitate to use the Super THANKS button under my videos! 🙏
If you want more informations and exclusive contents BUT NOT on youtube, please support my work on Patreon 👌:
https://www.patreon.com/bladeattila
This is an easy to follow also easy to build step by step tutorial in 2020 for a pretty simple free piston Stirling engine.
Ingredients:
Soft drink can 0,355-0,33 l // Diameter around 58mm
Energy drink can 0,25 l //Diameter around 52,7-53mm
Balloons: https://amzn.to/3xxGhx1
Steel Wool for this experiment: https://amzn.to/3COXuDa
Scissors: https://amzn.to/3CVD4Z9
Blade/ safety knife: https://amzn.to/3DVpuXf
Super glue: https://amzn.to/3r8ldfr
Red Silicone heat resistant
Washer: https://amzn.to/3laTkQ8
Pin https://amzn.to/3cQTqYx
The basic parameters available on my instagram page! Check the link bellow!
Ive made it from cans at 355/330/250 ml, Red Bull, Coke for main cylinder, and small energy drink as displacer.
Latex gloves, rubber balloon, few bolts and nuts, red silicone and super glue, blade and scissors.
OTHER VIDEOS YOU MIGHT LIKE:
○ Transparent NASA free piston Stirling: https://youtu.be/dOSGpzGhrJQ
○ Tutorial for easy to build free piston Stirling engine: https://youtu.be/_CsZv15XMcg
○ How to make DIY epoxy piston for Stirling engine: https://youtu.be/rxna7W8yhVE
○ DIY tutorial for a simple high speed thermoacoustic hot air engine: https://youtu.be/y50sve8p6I0
○ Simple Stirling engine car : https://youtu.be/s656Z5t_ugM
○ DIY an Oximoron hot air engine: https://youtu.be/ApW211YhkLA
○ 50Hz!!! High speed thermal lag cupid arrow engine: https://youtu.be/zV8edaVOUlg
○ The updated cheap and easy NASA Stirling from soft drink can: https://youtu.be/iAu4as9fRNo
○ Make your own solar heat engine DIY tutorial: https://youtu.be/Qd4c0-NF-tw
○ DIY test tube Stirling engine tutorial: https://youtu.be/c2vfz5zuHe4
My new Instagram page where I will share smaller projects, funny things, toys etc...etc... Follow me here:
https://www.instagram.com/attilablade/
╔═╦╗╔╦╗╔═╦═╦╦╦╦╗╔═╗
║╚╣║║║╚╣╚╣╔╣╔╣║╚╣═╣
╠╗║╚╝║║╠╗║╚╣║║║║║═╣
╚═╩══╩═╩═╩═╩╝╚╩═╩═╝
Dont forget to subscribe and follow my channel: https://www.youtube.com/user/bladeattila
Stay tuned!
Check my heat engine blog: http:manson-ericsson-hae.blogspot.hu
THANKS!
See You Soon!
BLADE")
