Uploaded April 2018 | Updated September 2026, 2 weeks ago
Is the fake Hakko FX-951 clone worth it´s money?
Support Roger on Patreon: patreon.com/kainkalabs
Followup-video here: youtu.be/qSWz7EStyds
Schematics & Datasheets of the fake FX-951:
kainkalabs.com/upload/index.php?f=15ad0d22095847
Temperature problems with indirect heated solder-stations:
youtu.be/phDOs18MbRs
ATTEN AT-80D reverse-engineering + fixing the problems:
youtu.be/hQY4sKDlp3I
EEVBlog-videos about direct vs. indirect heatet solder-tips:
youtu.be/scvS2yeUH00
youtu.be/yyt0X2CGDRM
Louis Rossmanns teardown & review of the fake FX-951 station:
youtu.be/yyt0X2CGDRM
Support Roger on Patreon!
patreon.com/kainkalabs
Is the fake Hakko FX-951 clone worth it´s money?
Support Roger on Patreon: patreon.com/kainkalabs
Followup-video here: youtu.be/qSWz7EStyds
Schematics & Datasheets of the fake FX-951:
kainkalabs.com/upload/index.php?f=15ad0d22095847
Temperature problems with indirect heated solder-stations:
youtu.be/phDOs18MbRs
ATTEN AT-80D reverse-engineering + fixing the problems:
youtu.be/hQY4sKDlp3I
EEVBlog-videos about direct vs. indirect heatet solder-tips:
youtu.be/scvS2yeUH00
youtu.be/yyt0X2CGDRM
Louis Rossmanns teardown & review of the fake FX-951 station:
youtu.be/yyt0X2CGDRM
Support Roger on Patreon!
patreon.com/kainkalabs
![Every maker should have…[Pt.25]…an IR Thermometer](https://i.ytimg.com/vi/wol957PJScQ/mqdefault.jpg "Every maker should have…[Pt.25]…an IR Thermometer
The poor-man´s Infrared Imaging-Camera :-)
Roger explains how an electronic Infrared-Thermometer (or Pyrometer) works and what traps there are when taking measurements with them.
Why is a high Spot-to-Distance ratio of the IR-lens important?
What is the optical parallax of the laser-pointer?
What is the emissivity-factor and when can it give false measurements?
Shop: http://www.ak-modul-bus.de/stat/laborzubehoer.html
Forum-Thread: https://forum.kainkalabs.com/forumdisplay.php?fid=13
twitter: http://twitter.com/kainkalabs
facebook: http://facebook.com/kainkalabs")
![Every Maker Should have...[Pt.39]...a Solder-Iron Thermometer](https://i.ytimg.com/vi/yLrHQyJil58/mqdefault.jpg "Every Maker Should have...[Pt.39]...a Solder-Iron Thermometer
A surprisingly accurate, cheap and user-friendly Chinese solder-iron thermometer. Also resold by HAKKO :-)
Support Roger on Patreon: https://www.patreon.com/kainkalabs
Very useful if you have a solder-station/solder-iron of unknown quality to check the true temperature at the solder-tip.
For the FG-100 there are also temperature-probes for solder-pots and for hot-air stations available.
Furthermore a teardown of the FG-100 & comparison with the ELV LTT1 and a normal thermocouple thermometer.
Link to the ELV LTT1:
https://www.elv.de/L%C3%B6tkolbentemperatur-Messger%C3%A4t-LTT-1/x.aspx/cid_726/detail_31395")
