Uploaded September 2026 | Updated November 2026, 4 days ago
A de-esser is not a fixed EQ cut. It is a compressor that only listens to your S sounds. The part that did not fit:
WHAT THE DETECTOR HEARS
The detector is fed through a band pass filter, so it only hears one slice of your voice. At 6.5 kHz with a bandwidth of 1.5 that slice runs about 5.3 to 8 kHz. Everything else you say is invisible to it. Nothing moves until that slice gets loud, which is the difference between a de-esser and an EQ that is cutting all the time.
WHY THE ATTACK HAS TO BE FAST
I measured my own S bursts off this take. They run 22 to 92 milliseconds, median 56. An attack of 1 ms catches them from the start. Anything in the tens of milliseconds and the S is already over before the gain has finished moving, which is why de-essers ship with attacks a hundred times faster than a vocal compressor.
RATIO SETS HOW HARD, RANGE SETS HOW FAR
Ratio decides how much it turns down for every decibel over the threshold. Range is a floor, so at 8 dB it can never take more than 8 off no matter how loud the S is. That floor is what keeps a hard S from being erased instead of softened.
BROADBAND AND SPLIT BAND ARE NOT THE SAME TOOL
Broadband turns your entire voice down for the moment the S is loud. Split band turns down only the band the detector is listening to. Measured on my voice, across the moments it is actually working, broadband takes 2 dB off the rest of my voice. Split band takes 0.3. That is the whole reason a heavily de-essed vocal can sound like it is ducking on every S.
NOT EVERY DE-ESSER IS BUILT THIS WAY
Some use a dynamic EQ band instead of a compressor. The trigger is the same, a filtered detector watching one range, and nothing is cut until your S sounds get loud.
HOW TO USE IT
Start with the threshold high so nothing is happening, then bring it down slowly until the S sounds settle back into your voice. Watch the gain reduction meter while you do it. If your whole voice seems to dip every time you hit an S, you are on broadband, and split band is the fix.
#audioengineering #deesser #mixingvocals #sibilance #homestudio #audiotips
A de-esser is not a fixed EQ cut. It is a compressor that only listens to your S sounds. The part that did not fit:
WHAT THE DETECTOR HEARS
The detector is fed through a band pass filter, so it only hears one slice of your voice. At 6.5 kHz with a bandwidth of 1.5 that slice runs about 5.3 to 8 kHz. Everything else you say is invisible to it. Nothing moves until that slice gets loud, which is the difference between a de-esser and an EQ that is cutting all the time.
WHY THE ATTACK HAS TO BE FAST
I measured my own S bursts off this take. They run 22 to 92 milliseconds, median 56. An attack of 1 ms catches them from the start. Anything in the tens of milliseconds and the S is already over before the gain has finished moving, which is why de-essers ship with attacks a hundred times faster than a vocal compressor.
RATIO SETS HOW HARD, RANGE SETS HOW FAR
Ratio decides how much it turns down for every decibel over the threshold. Range is a floor, so at 8 dB it can never take more than 8 off no matter how loud the S is. That floor is what keeps a hard S from being erased instead of softened.
BROADBAND AND SPLIT BAND ARE NOT THE SAME TOOL
Broadband turns your entire voice down for the moment the S is loud. Split band turns down only the band the detector is listening to. Measured on my voice, across the moments it is actually working, broadband takes 2 dB off the rest of my voice. Split band takes 0.3. That is the whole reason a heavily de-essed vocal can sound like it is ducking on every S.
NOT EVERY DE-ESSER IS BUILT THIS WAY
Some use a dynamic EQ band instead of a compressor. The trigger is the same, a filtered detector watching one range, and nothing is cut until your S sounds get loud.
HOW TO USE IT
Start with the threshold high so nothing is happening, then bring it down slowly until the S sounds settle back into your voice. Watch the gain reduction meter while you do it. If your whole voice seems to dip every time you hit an S, you are on broadband, and split band is the fix.
#audioengineering #deesser #mixingvocals #sibilance #homestudio #audiotips



