Uploaded August 2025 | Updated September 2026, 2 weeks ago
I've had a lot of questions about how I secured the inlet and outlet pipes on the Ultrasonic Fog Chiller. It's not really detailed in the video I did for the ultrasonic setup. I just used a short piece of pipe in the inlet elbow to go through the lid and secured it underneath the lid with a coupling. The fittings in the video are smaller than the 3 inch fittings on my chiller. I just grabbed what I had laying around to demonstrate for this video. A plumbing flange or some other fitting might work better depending on what box or tote you have.
I've had a lot of questions about how I secured the inlet and outlet pipes on the Ultrasonic Fog Chiller. It's not really detailed in the video I did for the ultrasonic setup. I just used a short piece of pipe in the inlet elbow to go through the lid and secured it underneath the lid with a coupling. The fittings in the video are smaller than the 3 inch fittings on my chiller. I just grabbed what I had laying around to demonstrate for this video. A plumbing flange or some other fitting might work better depending on what box or tote you have.
