Uploaded December 2020 | Updated September 2026, 2 weeks ago

---

In this video I'll walk you through the design decisions that I made for the retrofit PCB that will upgrade my CoolerMaster 690 frontpanel to USB 3.2 (2x Type-A Gen1 and 1x Type-C Gen2!)

The KiCad project and gerbers can be found here: gitlab.com/timkoers/cm-690-ii-usb-3.0-frontpanel-mod

Thanks for watching my video!

Want to contribute to my channel?

You can buy various electronics components using these links:
FeelElec FY6900 (20MHz to 60MHz): https://s.click.aliexpress.com/e/_d8uetg0
ESP-01S: https://s.click.aliexpress.com/e/_BfirlPh2
NodeMCU V3: https://s.click.aliexpress.com/e/_dXIVjLI
RobotDyn AC dimmer: https://s.click.aliexpress.com/e/_d8YAlGg
220V AC to 3.3V DC converter HLK-PM03: https://s.click.aliexpress.com/e/_dUHCfJW
VS1838B IR receiver: https://s.click.aliexpress.com/e/_dWGz9eG
Prototyping boards (various sizes): https://s.click.aliexpress.com/e/_d8ZxGAs
Dupont jumper cables (all variants): https://s.click.aliexpress.com/e/_dVyzHN2
(Tip!) Blitzwolf micro usb (+ USB C adapter): https://s.click.aliexpress.com/e/_d65Y0dQ
(Tip!) 115 in 1 scredriver set: https://s.click.aliexpress.com/e/_d8RBPy8

Please checkout my Patreon page! patreon.com/timselectronicslab

You can also find me on Instagram:
instagram.com/timselectronicslab

If you still need to create a Banggood account, please use my referral link:
banggood.app.link/AYJB8cq4X8

Please use this link if you are planning to purchase something:
banggood.com/index.php?zf=6303154