Uploaded October 2019 | Updated November 2026, 19 hours ago
#9SleeveDesign #LatestSleeveDesign #StitchAndSwear
How to draft a sleeve design on paper and design various sleeve design from that.
In this video, we will be learning about developing 9 sleeve design that can be used in Kurti, top, salwar and any form of upper wear. Sleeve design drafted here is very easy and can be recreated in many other form. You just need to be open to learn and apply a similar concept to your design.
Basic remains the same. You can use your creativity to establish more and more design for sleeve design for kurti sleeve, top sleeve, Maxi Dress Sleeve and Gown Sleeve.
Sleeve design paper cutting:
Total arm length- 17 inch
Arm hole length- 8 inch + 2-inch margin
Arm hole curve- 3.5 inch down
Arm hole round- 20 inch
Margin for back and front arm- half inch
Mohri for arm hole- 7 inch
Sleeve design 1 @ 16.50 – as per the paper cutting. We have marked 2 inch extra from top and bottom of the arm. And stitched the top and bottom 2 inch. As you can see we have a beautiful design. We will flatten up before the final stitching of the sleeve 2 inch stitched section.
Sleeve design 2 @ 19.35- You can open the upper arm 2 inch section and it would become as self design. It would be from of puff design. You can prepare the design with a single colour and multiple layered clothes. You can get it prepared by adding 2 to section.
Sleeve design 3 @ 24.00- In case you are left with less cloth for the arm. You can use this method for coupling the extra cloth that complement design of the arm. And join as mentioned in the sewing section.
You can prepare all three sleeve design in half sleeve and 3/4th sleeve. So we have discussed 9 sleeve design in just under 40 minutes.
For more such interesting and learning video. Stay connected and keep supporting us.
YT link : youtube.com/c/StitchSWearShantiSingh?sub_confirmation=1
Insta link : instagram.com/stitchandswear
fb page : facebook.com/The.Shanti.Singh
#9SleeveDesign #LatestSleeveDesign #StitchAndSwear
How to draft a sleeve design on paper and design various sleeve design from that.
In this video, we will be learning about developing 9 sleeve design that can be used in Kurti, top, salwar and any form of upper wear. Sleeve design drafted here is very easy and can be recreated in many other form. You just need to be open to learn and apply a similar concept to your design.
Basic remains the same. You can use your creativity to establish more and more design for sleeve design for kurti sleeve, top sleeve, Maxi Dress Sleeve and Gown Sleeve.
Sleeve design paper cutting:
Total arm length- 17 inch
Arm hole length- 8 inch + 2-inch margin
Arm hole curve- 3.5 inch down
Arm hole round- 20 inch
Margin for back and front arm- half inch
Mohri for arm hole- 7 inch
Sleeve design 1 @ 16.50 – as per the paper cutting. We have marked 2 inch extra from top and bottom of the arm. And stitched the top and bottom 2 inch. As you can see we have a beautiful design. We will flatten up before the final stitching of the sleeve 2 inch stitched section.
Sleeve design 2 @ 19.35- You can open the upper arm 2 inch section and it would become as self design. It would be from of puff design. You can prepare the design with a single colour and multiple layered clothes. You can get it prepared by adding 2 to section.
Sleeve design 3 @ 24.00- In case you are left with less cloth for the arm. You can use this method for coupling the extra cloth that complement design of the arm. And join as mentioned in the sewing section.
You can prepare all three sleeve design in half sleeve and 3/4th sleeve. So we have discussed 9 sleeve design in just under 40 minutes.
For more such interesting and learning video. Stay connected and keep supporting us.
YT link : youtube.com/c/StitchSWearShantiSingh?sub_confirmation=1
Insta link : instagram.com/stitchandswear
fb page : facebook.com/The.Shanti.Singh








