STEEL REPAIR – MWM STEEL SPOT MK II Tutorial mywaymotive 2021-11-30 | MWM Steel Spot MK II is a multi-function spotter, designed to repair steel panel and car body dents.Steel Spot MK II works on main control microprocessor via a very simple encoder, which enables a simple, fast and intuitive machine regulation since all needful machine parameters are immediately visualized on a digital display and pre-set.5 pre-set programs allow users to work with all steel welding consumables as: 3 pointed washers, straight and twisted washers with buttonhole, welding wiggly wire, coppered nails, coppered screws, coppered washers, carbon electrodes and coppered trim rivets.MWM tools used in the video:- Steel Spot MK II: mwmautomotive.com/it/catalogo-catalog-2021-2022#pag14- Pull system: mwmautomotive.com/it/catalogo-catalog-2021-2022#pag88- Steel consumables: mwmautomotive.com/it/catalogo-catalog-2021-2022#pag24
EQUIPMENT - NUMERO 5 HYBRID mywaymotive 2023-09-27 | Number 5 Hybrid is a newly designed Pulling Tower that responds to the operator's need to work closer to the repair point and at the same time keep the pulling command constant on the application.The classic MWM winch was therefore flanked by an electric actuator with a deviation of 1 mm and a maximum travel of 7.5 cm, controlled by a cable to avoid interference and disconnections.Number 5 Hybrid has the same characteristics as the manual version - pulling force up to 550 kg, displaced plate and maximum pull height - and has been subjected to numerous stress-tightness and safety tests during the product development period to ensure it is 100% in line with MWM quality standards.
EQUIPMENT - SEAL PROTECTION SOFT mywaymotive 2023-09-06 | Seal Protection Soft is an MWM product for masking rubber seals, used in the preparation phase for painting vehicle pillars.Seal Protection Soft uses the Velcro Ⓡ Brand system to stretch a strip of fabric across the door, lowering the seal and facilitating the correct painting of the pillars.PATENT PENDING MWM tools used in the video:820000 - Seal Protection Soft Thanks to "Autocarrozzeria 3T | PenskeCars Service" for his collaboration and hospitality during video shoot.
PLASTIC REPAIR - RiPlastic EXT mywaymotive 2023-06-21 | External interchangeable battery stapler.It enables plastic parts repair simply by sinking hot staples to fix and keep the two damaged parts aligned. Operation is extremely SIMPLE as the tool only has an on/off button and needs no other regulation or adjustment.Customer friendly and intuitive: operated by portable batteries, it is therefore easy to move around since such batteries are normally already available in any workshop. Charge indicator flashes shortly before battery is empty allowing to end repair session.Compatible with batterie Milwaukee® and DeWalt®.MWM tools used in the video:3107010 - RiPlastic EXT 31065 - Pre-cut winding staples
EQUIPMENT - COMPENSATION KIT NUMERO 5 mywaymotive 2023-03-01 | MWM have engineered and developed the Compensation Kit, with the goal to anchor the vehicle to the floor so to carry out without limitations the needed tractional pulling force.The kit comprises X Plate – recently developed pneumatic depression metal plate with relevant silencer and pulling synthetic belt with 2 hooks.The Compensation Kit is operated very easily : once the hooks are placed on the opposite sides of the belt, by using metal clamp always available in Car Body Repair Workshop, one is anchored to the vehicle frame and the other one to the X Plate – pneumatic depression metal plate anchored to the floor.
ALUMINIUM REPAIR - REPAIR with ZOLA ARC and PULLING BAR mywaymotive 2022-12-14 | ZOLA ARC is one of the best solutions for car body repair specialists which are looking for a high-performance aluminium welder. Designed to perform straightening work on sheet metal, its features make it unique: it is a state-of-the-art drawn arc welding device using slotted washers and aluminium pins. For this repair we used twisted washers as a consumable and Pulling Bar Basic as a pulling tool, as the damage was particularly extensive in length and required a greater and more gradual pulling traction. Watch the previous video where the choice of using twisted washers is explained!youtu.be/ke6dn42qp-UMWM tools used in the video: 3496001 ZOLA ARC DRAWN ARC WELDER 30360162 KIT 50 TWISTED WASHER ALMG3 32400 PULLING BAR BASIC 830 mm
ALUMINIUM REPAIR - ZOLA ARC: Repair with slotted washers in manual mode mywaymotive 2022-11-29 | ZOLA ARC is one of the best solutions for car body repair specialists which are looking for a high-performance aluminium welder. Designed to perform straightening work on sheet metal, its features make it unique: it is a state-of-the-art drawn arc welding device using slotted washers and aluminium pins.For the repair of this aluminum bonnet, we used twisted washers. This type of consumable is best suited for the veining in relief on the car body, as you can apply them side by side following the line of damage, and the slotted part remains free to insert the pin.This type of damage required very specific welding machine parameters, the MWM technician used the manual mode of the welding machine, where he customized the amperage power and the duration of the electrical pulse.MWM tools used in the video:3496001 ZOLA ARC DRAWN ARC WELDER30360162 KIT 50 TWISTED WASHER ALMG334102 PULL SYSTEM FOR ALUMINIUM
EQUIPMENT – NUMERO 5 XPLATE: LAMBORGHINI URUS FRONT SPAR REPAIR mywaymotive 2022-11-23 | XPLATE: PNEUMATIC DEPRESSION PLATE FOR EXTREME TRACTIONSXPLATE enables MWM Numero 5 - Pulling Tower to stay firmly anchored to the flooring, so to counterbalance heaviest and most extreme traction loads.X PLATE is particularly suitable for horizontal tractions where the angle between pulling winch and flooring surface is extremely reduced, it is infact specifically intended to be fully antislide.VULCANISED RUBBERBrand new rubber pad has been vulcanised to be more flexible and difficult to strain and increase resistance to abrasion so ensuring longer lifetime even in high wear conditions.FIXINGDuring the vulcanization chemical process the rubber pad gets shaped and fixed directly to the metal plate.C SHAPED PROFILETwo C shaped profiles increase friction to most damaged floorings, expecially in presence of cracks, splits or uneven surfaces.Thanks to "Autocarrozzeria 3T" for his collaboration and hospitality during video shoot. MWM tools used in the video:3288001 - NUMERO 5 X PLATE - FAST INSTALLATION PULLING TOWER
ALUMINIUM REPAIR – Zola Arc: Hood repair with AlMg3 pins mywaymotive 2022-11-16 | ZOLA ARC is one of the best solutions for car body repair specialists which are looking for a high-performance aluminium welder. Designed to perform straightening work on sheet metal, its features make it unique: it is a state-of-the-art drawn arc welding device using slotted washers and aluminium pins.For the repair of this aluminum hood, we used the almg3 (Aluminium - Magnesium) pins as consumables, particularly suitable for damages requiring higher pulling force.The pin, having a larger diameter than the washer, allows to repair deeper damages.MWM tools used in the video:31953 - ZOLA ARC TROLLEY KIT30360300 - KIT 50 PINS AlMg33411000 - BASIC PULL SYSTEM
Equipment – Numero 5, MWM Vertical pull mywaymotive 2022-06-15 | Numero 5, MWM fast installation pulling tower, allows a pulling traction force up to 550 kg, thanks to a metal plate anchored to the floor through pneumatic depression. Equipped with 15 adjustments up to 1.65 m in height - 2.20 m with an optional extension- it allows the vehicle repair in limited damaged areas either in the upper part as roof pillars and in the lower part as door sills.To perform above at its best, MWM has implemented the VERTICAL PULLING KIT, which allows traction from bottom ground: it is composed of an additional metal plate with pneumatic depression, a hook for belt connection and the relevant muffler.Through the use of the Vertical Pulling Kit, it is therefore possible to repair easily and quickly all lower parts of car bodies, such as door sills.Kit featured in the video comprises:3288010 – Vertical Pulling Kit 32880 – Numero 5 Fast installation pulling tower31350 – Kit Glue Multipads3288087 – Muffler 3/8 Plus Thanks to "CARROZZERIA LEVANTE" and Massimo Spisni for his collaboration and hospitality during the video shooting.
ALUMINIUM REPAIR - ZOLA ARC Drawn Arc Aluminium Welder mywaymotive 2022-05-25 | ZOLA ARC is one of the best solutions for car body repair specialists which are looking for a high-performance aluminium welder.Designed to perform straightening work on sheet metal, its features make it unique: it is a state-of-the-art Drawn Arc Welder using slotted washers and aluminium pins.Manufactured by inverter technology to ensure stability of electrical absorption, in addition the welding area can be protected by ARGON gas to prevent impurities from the repair.ZOLA ARC is equipped with a handy and user-friendly digital display from which you can choose between two working modes: Synergic and Manual, where you can store customised programmes.MWM designed, tested and manufactured ZOLA ARC with particular consideration to every detail and to make every time the welding a pleasant experience.It is supplied with straight washers AlMg3, AlMgSi and relevant electrode.In addition, AlMg3 pins with puller head and AlMg3 and AlMgSi twisted washers with buttonhole are available.Lightweight and easy handling, thanks to its weight - with only 7,9 kg - it is easy to transport.
PDR SMART REPAIR – MWM Led light lamps for hail damages repair mywaymotive 2021-12-07 | MWM LED light lamps are engineered to identify damages to be repaired on surfaces such as to light hidden and hard to reach working positions.Specifically, Led light lamps are intended for hail damages repair where light helps users identifying dents position and entity as well as glue pulling repair and welding spot repair.Led light Lamps are useful equipment for glue pulling repair and welding spot repair as well.MWM tools used in the video:LED LIGHT LAMP: mwmautomotive.com/en/mwm-led-lamps-mini-led-lamp-lllamp#pag2- Lamp housing 860 x 160 mm, hosting 2 cold white CW (3000 lumen) and 1 warm white WW (6000 lumen);- Total lamp weight 22,5 KG;- Telescopic arm adjustable in various positions (horizontal, vertical, car side), Max height 280 mm, outreach 105 mm;- 4 turning wheels, 2 of them with holding brakes;- Operated by DC at 12 Volts or AC mains at 230 Volts (battery and AC/DC on request);- Remote control included for on/off switchable and full range light intensity control.MINI LED LIGHT LAMP: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag56- Lamp housing 380 x 160 mm, hosting 2 cold white CW (3000 lumen) and 1 warm white WW (6000 lumen);- Total lamp weight 2,80 KG;- 360° pivoting support flexible tube;- Operated by DC at 12 Volts or AC mains at 230 Volts (battery and AC/DC on request);- Remote control included for on/off switchable and full range light intensity control.
PDR repair - How to use a PDR spring beater / WOODPECKER mywaymotive 2021-08-31 | Made for hail damage or similar, the PDR spring beater has two 5/18‘’ thread both sides for interchangeable tips (tips not included) connected by a central reinforced spring. To protect panel’s paint while working, the tool is equipped of two rubber O-ring positioned on the two opposite sides.Total weight lower than 1KG - total length 105mm. MWM tools used:- PDR woodpecker: mwmautomotive.com/en/woodpecker-pdr-panel-spring-beater#pag1- PDR tips and extension: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag62
PDR SMART Repair - How to use lever tools for paintless dent repair (PDR) mywaymotive 2021-06-01 | The paintless dent removal (PDR) technique can be used to remove parking damage, chestnut or hail damage and small damages in general, resulting in quick and economic repairs.If used in combination with selected accessories and glue pulling system, PDR levers can guarantee a perfect and final repair.MWM tools used:- PDR levers: mwmautomotive.com/en/new-dent-removal-steel-levers-sets#pag1- Led light Lamp: mwmautomotive.com/en/mwm-led-lamps-mini-led-lamp-lllamp#pag1 - PDR smart repair workstation: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag50
PDR SMART REPAIR - How to repair a car door dent with MWM glue pulling system mywaymotive 2021-05-26 | Full repair on car door using MWM glue pulling system.The system allows the user to work directly on painted surfaces and avoid flaking and repainting the car.MWM tools used in the video:- Fast installation Pulling tower: mwmautomotive.com/en/numero-5-fast-installation-pulling-tower - Pull system: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag88- Glue tabs: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag58- Alu hammers: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag40- Glue consumables: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag62
PDR SMART REPAIR - How to repair a car door dent with MWM 2AX Multipads kit and glue pulling system mywaymotive 2021-05-26 | Full repair on car door using MWM 2AX Multipads system and glue pulling tools.The system allows the user to work directly on painted surfaces and avoid flaking and repainting the car.MWM tools used in the video:- Fast installation Pulling tower: mwmautomotive.com/en/numero-5-fast-installation-pulling-tower - 2AX Multipads kit: mwmautomotive.com/en/2-ax-multipads-kit-code-32195- Pulling bar: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag86- Glue tabs: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag58- Alu hammers: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag40 - Glue consumables: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag62
ALUMINIUM REPAIR - How to repair an aluminium panel with ALUspot MK I mywaymotive 2020-11-30 | Aluminium panel repair performed using MWM ALU SPOT MK I, a capacitor discharger spotter intended to weld studs from Ø 3 mm to Ø 5 mm on aluminium panels and car body parts, as any other metallic accessories, ferrous and non-ferrous, with TS ignition tip on non-treated and non-oxidized surfaces of mild steel, galvanized steel, stainless steel and brass.MWM tools used in the video:- ALU SPOT MK I: mwmautomotive.com/en/alu-spot-mki-%E2%80%93-newest-mwm-aluminium-spotter- Alu shock kit: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag38- Pulling bar: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag86- Pull system: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag88- Alu consumables: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag38- Pneumatic grinder: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag92
Car body repair - NUMERO5 | PULLING TOWER mywaymotive 2020-11-18 | Designed to reach a pulling traction force up to 550 Kg it is counterbalanced by the pulling of a metal plate anchoring to the ground through pneumatic depression.Dimensions and weight are very limited 35x55x165 cm, 20 Kg, and it can be used on any material needed to be repaired as steel, aluminium, via spotwelding or hotmelt glue.Supplied together with the basic usage components (hook gripping head, eyebolts and hooks) to be eventually completed with the MWM product range suitable to fit the necessary repair conditions (multipads, washers, bolts).MWM tools used in the video:- Fast installation Pulling tower: mwmautomotive.com/en/numero-5-fast-installation-pulling-tower - Glue tabs: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag58- Alu hammers: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag40- Glue consumables: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag62- STEEL Spot I: mwmautomotive.com/en/presentiamo-la-nuova-saldatrice-mwm-steel-spot-i%C2%B0 - Steel consumables: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag24Thanks to "CARROZZERIA LEVANTE" of Massimo Spisni for his collaboration and hospitality during video shoot.
SMART REPAIR - How to repair hail damages with ZOLA8 PDR Inverter mywaymotive 2020-06-04 | ZOLA 8 is a PDR (paintless dent removal) electronic inverter suitable to repair car bodies both in steel and aluminium operating with a carbon Electrode to pop dents up through heating in small areas (particularly indicated for Hail Dent repairers).ZOLA 8 can be used to step by step reduce bigger dents and make them easier workable and a potentiometer helps to adjust Power/Voltage from 0 so to provide complete accurate regulation.MWM tools used in the video:- ZOLA 8 Inverter: mwmautomotive.com/en/zola8-pdr-inverter - Led Light Lamp: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag56- Pneumatic grinder: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag92- PDR lever: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag60- Alu hammer:Alu hammers: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag40
PLASTIC REPAIR - How to repair a PC (Polycarbonate) car bumper mywaymotive 2020-02-26 | MWM Nitrogen plastic welder can be used to repair PC (Polycarbonate) plastic parts as the bumper in the video.PC can be easily repaired by using plastic consumables supplied by MWM in flat strips and round wires.MWM tools used in the video:- Single plastic welder: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag66- Pneumatic grinder: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag78- PC Plastic mwmautomotive.com/en/catalogo-catalog-2021-2022#pag74- Clamp holder: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag78 Plastic repair focus and manual: mwmautomotive.com/en/plastic-repair-solutions-automotive-industry
PLASTIC REPAIR - How to repair a PP (Polypropylene) coolant overflow tank mywaymotive 2020-02-26 | MWM Nitrogen plastic welder can be used to repair PP (Polypropylene) plastic parts as coolant overflow tank in the video.PP can be easily repaired by using plastic consumables which are supplied by MWM in flat strips, angular strips and round wires, black and white color.MWM tools used in the video:- Single plastic welder: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag66 - Pneumatic grinder:mwmautomotive.com/en/catalogo-catalog-2021-2022#pag78- Pre-cut staples: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag74- PP Plastic consumable: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag74 Plastic repair focus and manual: mwmautomotive.com/en/plastic-repair-solutions-automotive-industry#pag1
PLASTIC REPAIR - How to repair a P/E (PP+EPDM) car bumper mywaymotive 2019-12-04 | MWM Nitrogen plastic welder can be used to repair P/E (PP+EPDM) plastic parts as the bumper in the video.P/E can be easily repaired by using PP plastic consumables which are supplied by MWM in flat strips, angular strips and round wires.MWM tools used in the video:- Single plastic welder: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag66- Pneumatic grinder: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag78- PP Plastic consumable: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag74- Aluminium tape: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag78Plastic repair focus and manual: mwmautomotive.com/en/plastic-repair-solutions-automotive-industry
PLASTIC REPAIR - How to repair a TPO bumper part mywaymotive 2019-12-04 | MWM Nitrogen plastic welder can be used to easily repair TPO plastic parts as the bumper part in the video.TPO plastic consumables are supplied by MWM in round wires.MWM tools used in the video:- Single plastic welder: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag66- Pneumatic grinder: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag78- TPO Plastic consumable: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag74Plastic repair focus and manual: mwmautomotive.com/en/plastic-repair-solutions-automotive-industry
PLASTIC REPAIR - How to restore missing support on a PA/Nylon grid mywaymotive 2019-12-04 | MWM Nitrogen plastic welder can be used to easily repair PA (Polyamide) /Nylon plastic parts and restore missing as the grid support in the video.PA/Nylon plastic consumables are supplied by MWM in natural round wires.MWM tools used in the video:- Single plastic welder: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag66- Pneumatic grinder: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag78- PA/Nylon Plastic consumable: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag74- Aluminium guide: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag78Plastic repair focus and manual: mwmautomotive.com/en/plastic-repair-solutions-automotive-industry
PLASTIC REPAIR - How to repair an ABS wing mirror mywaymotive 2019-12-04 | MWM Nitrogen plastic welder can be used to easily repair ABS plastic parts, as the wing mirror in the video.ABS plastic consumables are supplied by MWM in both wires and flat strips.MWM tools used in the video:- Single plastic welder: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag66- Pneumatic grinder: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag78- ABS Plastic consumable: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag74- Pre-cut staples: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag74- Clamp holder: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag78Plastic repair focus and manual: mwmautomotive.com/en/plastic-repair-solutions-automotive-industry
PLASTIC REPAIR - MWM bumper rollers kit mywaymotive 2019-07-17 | A kit developed to correct plastic bumper damage using proper rollers. Made of aluminium, they can work with high temperature and bumper can be shaped when it has been heated up.The kit contains 3 different shape rollers: one wide and flat, one ball-shaped, and one with a sharp edge lines.MWM tools used in the video:- Bumper roller: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag78- Electric heating gun: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag36Plastic repair focus and manual: mwmautomotive.com/en/plastic-repair-solutions-automotive-industry
PLASTIC REPAIR - How to easy change air type in MWM Plastic welders mywaymotive 2018-11-12 | Compressed air or Nitrogen gas? Both of them! With few moves you can easily switch type of source supply and obtain two type of quality welding with the same machine.MWM tools used in the video:- Pocket plastic welder: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag66- Single plastic welder: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag66- Nitrogen gas generator: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag68- Connection pipes: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag68Plastic repair focus and manual: mwmautomotive.com/en/plastic-repair-solutions-automotive-industry
PLASTIC REPAIR - Plastic reapir with Nitrogen gas VS Compressed air mywaymotive 2018-10-25 | The video shows the difference within plastic welding made with Nitrogen and Compressed air supply.Better quality is provided by using Nitrogen gas which provide a complete smoke and bubble free repair, differently from compressed air welding.MWM tools used in the video:- Pocket plastic welder: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag66- Single plastic welder: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag66- Nitrogen gas generator: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag66- Plastic consumables: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag74Plastic repair focus and manual: mwmautomotive.com/en/plastic-repair-solutions-automotive-industry
Plastic repair - How to hold bulky parts with MWM Telescopic arm mywaymotive 2018-09-10 | Telescopic articulated arm with regulation on 360° is mainly used to hold bulky plastic parts (normally bumpers, car doors or side protections) on workplates positioned on our extendible trolleys (cod. 31450). It is a useful tool which allow the user to work hand free and with any additional support during body shop repair.MWM tools used in the video:- Extendible multiuse trolley: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag84- Universal part holder: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag6678- Aluminium worktop set: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag78- Clamps: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag92
MWM LASER TRACER - How to speed up consumables welding mywaymotive 2018-04-16 | MWM LASER LINE traces a continuous red led laser line to be used as a guideline along which to weld all main consumables used for steel welding like plain and twisted washers, 3 pointed washers as well as wiggly wire or for aluminium welding like M4 and M5 screws into which to screw threaded rings.Suction cup at his bases makes the tool versatile and can be used on both steel and aluminium. MWM tools used in the video:- Laser tracer: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag26- Steel consumables: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag24- STEEL SPOT MK II: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag14
STEEL REPAIR - How to use MWM SUPER SPOTTER Evolution mywaymotive 2017-11-06 | WHAT ELSE WOULD YOU LIKE TO WELD?LITERALLY NOTHING AT ALL!The new MWM KIT SUPER SPOTTER EVOLUTION is inclusive of all accessories and electrodes necessary to get the most out of SUPER SPOTTER EVOLUTION in every application during repair on steel surface!As completion of the exisiting KIT, it provides more versatility and flexibility of usage through wiggly wire and different washers, as well as all electrodes.MWM tools used:- SUPER SPOTTER: mwmautomotive.com/en/what-else-would-you-weld- Steel consumables: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag24
MADE IN MWM: Welding Guns mywaymotive 2017-09-27 | http://www.mwmautomotive.comMWM QUALITY IS MADE IN ITALY, BETTER IT IS MADE IN MWMAttention for every single customer, total care for the products manufactured, complete knowledge of the quality delivered and full responsability for the After Sales Service are the main concerns of MWM as a company.Every single product is selected, checked, assembled, dimensionally and mechanically tested prior to the final assembly, after which the whole manufacture will be finally run in.Last but not least, all MWM products can easily be customized (following customers’ wishes) being every component machined internally.BEST GUARANTEE FOR SUCCESS!LA QUALITA’ MWM E’ MADE IN ITALY, ANCORA MEGLIO, E’ MADE IN MWMCompleta attenzione ad ogni singolo cliente, cura totale nella produzione dei componenti, minuziosa conoscenza del livello di qualità fornito e piena responsabilità del Servizio Postvendita sono le principali preoccupazioni della azienda MWM. Ogni singolo prodotto viene selezionato, controllato, montato, testato dimensionalmente e meccanicamente prima del montaggio finale, al termine del quale viene regolarmente rodato. Non meno importante, tutti i prodotti MWM possono facilmente essere personalizzabili (secondo le indicazioni dei clienti) essendo la produzione gestita internamente all’azienda. MIGLIORE GARANZIA DI SUCCESSO !
STEEL REPAIR - MWM STEEL SPOT I Tutorial mywaymotive 2017-09-06 | MWM Steel Spot I is a multi-function spotter, designed to repair steel panel and car body. Steel Spot I works on main control microprocessor via a very simple encoder, which enables a simple, fast and intuitive machine regulation since all needful machine parameters are immediately visualized on a digital display. MWM tools used:- STEEL SPOT I: mwmautomotive.com/it/catalogo-catalog-2021-2022#pag14- Pull system: mwmautomotive.com/it/catalogo-catalog-2021-2022#pag88 - Steel consumables: mwmautomotive.com/it/catalogo-catalog-2021-2022#pag24
PLASTIC REPAIR - How to fit car parking sensors on a bumper mywaymotive 2017-02-14 | MWM provides the most professional line available on the market as COMPLETE DRILL KIT to install CAR PARKING SENSORS on PLASTIC BUMPERS. Range includes 23 different tool sizes (mm 14 - 15 - 15,8 - 16 - 16,8 17 - 18 - 18,5 - 19 - 20 - 21 - 22 - 22,5 - 23 - 24 - 26 - 26,5 - 27 - 28 - 30 - 32 - 34 - 37,5) in hardened and tempered steel to provide the sharpest holes and no burrs. The video is a tutorial showing how to best install parking sensor on bumper without damaging and affecting any existing part.MWM tools used:- Drill kit for parking sensor: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag76- Riplastic: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag72- Double panel pre-cut staples: mwmautomotive.com/en/new-pre-cut-staple-models
STEEL REPAIR - STEEL CAR BODY PARTS REPAIR mywaymotive 2016-11-03 | NEW STEEL SPOT VIDEO!! youtu.be/8lzH8WhD8xs !!!MWM has traditionally created a very exhaustive package of tools, components, and consumable products ready to support the operator during steel car body repairs, ranging from spotwelders, to wavy wire, slide hammers, three point washers, pulling bars, spotwelding electrodes, washers twisted and plain, fast ground connectors, welding rivets and screws, gripping heads, caps,torches, cables, pull systems and all needed accessories like dollies and beating hammers.MWM tools used:- STEEL SPOT I: mwmautomotive.com/it/catalogo-catalog-2021-2022#pag14- Pull system: mwmautomotive.com/it/catalogo-catalog-2021-2022#pag88 - Steel consumables: mwmautomotive.com/it/catalogo-catalog-2021-2022#pag24
PLASTIC REPAIR - Parking sensors installation on plastic car bumper mywaymotive 2016-02-25 | Assembling parking sensors on a new bumper?MWM offers a complete kit with appropriate tooling inclusive of drills for diameters mm 15/16/17/18/18,5/19/20/21/22/22,5/23/24/26/27/28/30/32 supplied in a handy plastic case and relevant use instructions.MWM tools used:- Drill kit for parking sensor: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag76- Riplastic: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag72- Double panel pre-cut staples: mwmautomotive.com/en/new-pre-cut-staple-models
PLASTIC REPAIR - PRECUT and STANDARD STAPLES for plastic car body repair mywaymotive 2016-02-16 | After recent MWM acknowledgement of relevant PATENT, we are proud to show how we manufacture our precut and standard staples for plastic car body repair.MWM tools used:- Pre-Cut staples: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag74
PLASTIC REPAIR - Angular Strips for car body plastic welding mywaymotive 2015-11-16 | To testify full commitment towards NITROGEN PLASTIC WELDING, MWM has started to provide plastic angular strips to fully match difficult welding positions and be able to create supports, brackets and everything to be added to a standard part and to fully repair any part of plastic car body.Dimensions are cm1,5X5,8/5,8X30 and angular strips are available in our stock both natural (white) and black MWM in bags of 15 or 30 pcs.MWM tools used:- Plastic consumables: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag74- Plastic welder: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag66
PLASTIC REPAIR - How to repair a perforation hole on plastic car bumper mywaymotive 2015-10-20 | MWM Plastic Welders can be successfully used to reassemble missing plastic supports to the original structure by welding them appropriately to the damaged or broken support holders.MWM supplies consumables components like all shape plastic strips as well as wires compatible with any type of plastic component.MWM tools used:Plastic welder: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag66Nitrogen Generator: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag66Plastic consumables: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag74Pneumatic grinder: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag92
PLASTIC REPAIR - How to repair a split on a bumper mywaymotive 2015-09-16 | Car bumper repair with DOUBLE GAS PLASTIC WELDER.Completely renewed, the welder sees the introduction of a button on the gun body to switch the output of the air in nitrogen gas.This system allows a considerable saving on the nitrogen bottle.The repair performed in the video is a cut (or a split) in a bumper.Very notable is that repairs are now possible with very low costs, so proportionally increasing profit considering that plastic is increasingly being used in the car manufacturing industry.MWM tools used:Plastic welder: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag70Plastic consumables: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag74 Pre-cut staples: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag74
PLASTIC REPAIR - How to repair a BUTTONHOLE SUPPORT on a bumper mywaymotive 2015-09-01 | http://www.mwmautomotive.comMWM Plastic Welders can be successfully used to reassemble missing plastic supports to the original structure by welding them appropriately to the damaged or broken support holders.MWM supplies consumables components like all shape plastic strips as well as wires compatible with any type of plastic component.For more informations: http://www.mwmautomotive.com/en/categoria/linea-plastica/kit-plastic-welder
PDR REPAIR - OctoPULLER for glue pulling repair and PDR repair mywaymotive 2015-01-13 | MWM product range for dent and hail damage repair using glue pulling repair system.OctoPuller ™ joins pulling systems for MWM suction cups, highlighting by its agility and lightness.With a very low weight, OctoPuller ™ can easily be positioned above the suction cup to pull and throught its lever system allows easy and quick pull.The head can be rotated by 360° enabling the introduction of suction cup on its inside in a quick and efficient way, while its height adjustment is set up with the top screw.The bases can rotate allowing the support even on sloping surfaces; also their protective covering prevents damage or scratches in the non-affected parts to repair.OctoPuller ™ design, cute and elegant, makes it possible to combine the aesthetics with maximum functional rigidity.MWM tools used:Octopuller: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag52Glue tabs: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag58Glue sticks: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag62
ALUMINIUM REPAIR - How to repair dents on ALUMINIUM CAR BODY mywaymotive 2014-09-01 | Aluminium panel repair performed using MWM ALU SPOT MK I, a capacitor discharger spotter intended to weld studs from Ø 3 mm to Ø 5 mm on aluminium panels and car body parts, as any other metallic accessories, ferrous and non-ferrous, with TS ignition tip on non-treated and non-oxidized surfaces of mild steel, galvanized steel, stainless steel and brass.MWM tools used in the video:- ALU SPOT MK I: mwmautomotive.com/en/alu-spot-mki-%E2%80%93-newest-mwm-aluminium-spotter- Alu shock kit: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag38- Pulling bar: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag86- Pull system: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag88- Alu consumables: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag38- Pneumatic grinder: mwmautomotive.com/en/catalogo-catalog-2021-2022#pag92
PLASTIC REPAIR - Pre-cut vs Standard staples for plastic repair mywaymotive 2014-07-21 | http://www.mwmautomotive.comWith MWM pre-cut staples, made for repair plastic part on car-body repair, you can make a faster job without any additional equipment needed.Visit our website and discover all different sizes of pre-cut staples for plastic part on car body. http://www.mwmautomotive.com/it/nuovi-modelli-di-graffette-preincise
PDR REPAIR - How to use MWM High Traction Suction Cups mywaymotive 2014-07-07 | http://www.mwmautomotive.comThe new range of high traction suction cups of 16, 21, 26 and 32 mm diameter, improves the contact surface between cup and glue, increasing the applicable traction force before the release.
Massa Magnetica a puntare - Magnetic Mass for Spot Welding mywaymotive 2014-04-22 | http://www.mwmautomotive.comCODICE PRODOTTO/PN: 37320
Massa Contatto Estrattore - Contact Mass for Slider Cup mywaymotive 2014-04-22 | CODICE PRODOTTO/PN: 33051
Massa Contatto AluSpotter - Contact Mass for AluSpotter mywaymotive 2014-04-22 | http://www.mwmautomotive.comCODICE PRODOTTO/PN: 31154
