Uploaded October 2026 | Updated November 2026, 3 hours ago
Turn on subtitles to see comments on every step of the installation.
We replaced the stock rear lights on a Harley-Davidson Street Glide 2024 with eight ultra-compact Kellermann ATTO DF indicators. Each ATTO DF is a 3-in-1 unit: tail light, brake light and turn signal. They fit into the factory holes left in the rear fender from the stock light mounting studs, four on each side.
With the ignition off, it looks like there are no rear lights at all: the saddlebags seem to float in the air. With the lights on, the ATTOs are brighter than stock and the bike looks like a spaceship.
0:00 Street Glide 2024 with stock rear lights.
0:29 Removing the lower stiffening bracket.
0:54 Removing the stock lights.
1:21 Kellermann ATTO DF 3-in-1 indicators.
1:30 Installing ATTO into the rear fender.
2:18 Protecting and routing the wires.
3:16 Wiring with feed-through terminals.
3:54 Kellermann ATTO on Street Glide 2024.
4:15 ATTO brightness compared to stock lights.
On video the center of the indicator looks white or orange when braking. That's the camera sensor being overexposed; in reality the color is deep red.
Full article: https://stuntex.ru/en/article/atto-street-glide
Forum discussion: https://forum.stuntex.ru/d/49-kellermann-atto-na-street-glide
Kellermann ATTO in our shop: https://stuntexshop.ru/street/street_moto-tiuning/atto-kellermann
About Kellermann brand: https://stuntexshop.ru/brands/kellermann
#Kellermann #StreetGlide #HarleyDavidson
Turn on subtitles to see comments on every step of the installation.
We replaced the stock rear lights on a Harley-Davidson Street Glide 2024 with eight ultra-compact Kellermann ATTO DF indicators. Each ATTO DF is a 3-in-1 unit: tail light, brake light and turn signal. They fit into the factory holes left in the rear fender from the stock light mounting studs, four on each side.
With the ignition off, it looks like there are no rear lights at all: the saddlebags seem to float in the air. With the lights on, the ATTOs are brighter than stock and the bike looks like a spaceship.
0:00 Street Glide 2024 with stock rear lights.
0:29 Removing the lower stiffening bracket.
0:54 Removing the stock lights.
1:21 Kellermann ATTO DF 3-in-1 indicators.
1:30 Installing ATTO into the rear fender.
2:18 Protecting and routing the wires.
3:16 Wiring with feed-through terminals.
3:54 Kellermann ATTO on Street Glide 2024.
4:15 ATTO brightness compared to stock lights.
On video the center of the indicator looks white or orange when braking. That's the camera sensor being overexposed; in reality the color is deep red.
Full article: https://stuntex.ru/en/article/atto-street-glide
Forum discussion: https://forum.stuntex.ru/d/49-kellermann-atto-na-street-glide
Kellermann ATTO in our shop: https://stuntexshop.ru/street/street_moto-tiuning/atto-kellermann
About Kellermann brand: https://stuntexshop.ru/brands/kellermann
#Kellermann #StreetGlide #HarleyDavidson










