Name: Lathe Leveling and Alignment || INHERITANCE MACHINING @InheritanceMachining
Uploaded: 2026-09-28T08:17:00-05:00
Duration: 8 min 17 s
Description: Lathe Leveling and Alignment || INHERITANCE MACHINING

Lathe Leveling and Alignment || INHERITANCE MACHINING

Inheritance Machining 2026-09-28 | Lathe Leveling and Alignment || INHERITANCE MACHINING

Made for One Man, Half a World Away

Inheritance Machining 2025-08-15 | Go to shareasale.com/r.cfm?b=2354729&u=4548275&m=138211&urllink=&afftrack= to check out BambuLab's X1C, filaments and more!
#bambulab #bambulabA1 #bambulabp1s #bambulabs

Try Onshape Free – Engineers Get Up to 6 Months Pro: https://Onshape.pro/InheritanceMachining

#ToolroomTakeover2025

Jonesey Makes’ video: youtu.be/Ea1sKIVE584

Not An Engineer’s video: youtube.com/watch?v=khRzQz0PnZ0

Toolroom Takeover 2025 Playlist: youtube.com/playlist?list=PL2ISTNaXIkzC2s9OMVn2EnkT_c3g7JU9-&si=Z5_4_xdAnSrqeSnx

For all sponsorship inquiries, please contact inheritancemachining@adhesivemedia.com.

Patreon - patreon.com/inheritancemachining
Drawings Store - inheritancemachining.com/?product_tag=drawings
Merch - inheritance-machining.myspreadshop.com
Instagram - instagram.com/inheritancemachining
Amazon Store (affiliate) - amazon.com/shop/inheritancemachining

Thank you again to the Micrometer level Patreon members listed at the end of the video!

TIMESTAMPS

0:00 Intro
1:00 Machiners Unite
2:10 Anti-intuitiveness
3:53 Controversial
5:57 It Must be Dove
6:43 Cost Effective
8:21 My Middle Name is "Questionable"
10:31 It's aMAZEing
13:17 What's HapPINing
15:10 Debatable
16:45 SOILER ALERT
19:45 A man after my own heart
23:20 Hot and Heavy

FAQ
Drafting Equipment (affiliate links): amzn.to/3P0HvMe
A/V Equipment (affiliate links): amzn.to/3Pi45jB
Editing: Final Cut Pro X
Intro Song: Way Back Way Back When (Instrumental Version) - Gamma Skies
epidemicsound.com/track/SQxEhTVi9I/\

This video was sponsored by Bambu Lab.
This video was sponsored but Onshape.

youtu.be/9CBT4Rp0lK0

© 2025 Inheritance Machining, LLC. All Rights Reserved.

They Made A Million of These...

Inheritance Machining 2025-06-27 | Thanks to Helix Sleep for sponsoring! Check out helixsleep.com/inheritancemachining to shop their Fourth of July Exclusive Partner Offer and get 27% off Sitewide #helixsleep

You know what they say... when you don't like the way a german designed it... replace it with another german design. Easier said than done. Or maybe some ideas just aren't meant to be used together.

#inheritancemachining #machineshop

For all sponsorship inquiries, please contact inheritancemachining@adhesivemedia.com.

Patreon - patreon.com/inheritancemachining
Drawings Store - inheritancemachining.com/?product_tag=drawings
Merch - inheritance-machining.myspreadshop.com
Instagram - instagram.com/inheritancemachining
Amazon Store (affiliate) - amazon.com/shop/inheritancemachining

Thank you again to the Micrometer level Patreon members listed at the end of the video!

TIMESTAMPS

0:00 What's The Big Idea(s)
3:08 Sleep
4:38 Thug Life
7:59 One Step Forward
10:15 Two Steps Back
11:39 Doh... nuts
14:08 The Cold and Pokies
17:27 Buddah Baybay
19:04 German Enough?

FAQ
Drafting Equipment (affiliate links): amzn.to/3P0HvMe
A/V Equipment (affiliate links): amzn.to/3Pi45jB
Editing: Final Cut Pro X
Intro Song: Way Back Way Back When (Instrumental Version) - Gamma Skies
epidemicsound.com/track/SQxEhTVi9I/\

This video is sponsored by Helix Sleep.

youtu.be/hx5GoAddwo8

© 2025 Inheritance Machining, LLC. All Rights Reserved.

The Invention that WASNT

Inheritance Machining 2025-05-30 | Try Lemonade Salt and Get YOUR FREE LMNT Sample Pack with any purchase when you order through http://drinklmnt.com/Inheritance

While making a multi-video projects ensures I can adequately cover all aspects new invention, it also give the audience time to point out how the invention already exists. Regardless, we've made it this far and I really want this tool. So we persist!

#inheritancemachining #machineshop #hobbymachinist

For all sponsorship inquiries, please contact inheritancemachining@adhesivemedia.com.

Patreon - patreon.com/inheritancemachining
Drawings Store - inheritancemachining.com/?product_tag=drawings
Merch - inheritance-machining.myspreadshop.com
Instagram - instagram.com/inheritancemachining
Amazon Store (affiliate) - amazon.com/shop/inheritancemachining

Thank you again to the Micrometer level Patreon members listed at the end of the video!

TIMESTAMPS

0:00 Right in the Knuths
1:44 A Based Creation
3:24 A Hole Lotta Boring
5:33 Watching My Figure
7:50 Cutting Corners
9:26 Tain't Gonna Fit
11:33 Hard-ish
12:59 What is Dove
14:20 Baby Don't Skirt Me
16:01 Press S#!T
17:17 All Them Angles
19:00 Poking Fun
20:36 Aww Bush!
22:51 Looks good! Except...

FAQ
Drafting Equipment (affiliate links): amzn.to/3P0HvMe
A/V Equipment (affiliate links): amzn.to/3Pi45jB
Editing: Final Cut Pro X
Intro Song: Way Back Way Back When (Instrumental Version) - Gamma Skies
epidemicsound.com/track/SQxEhTVi9I/\

This video was sponsored by LMNT.

youtu.be/Jc3h38qdItI

© 2025 Inheritance Machining, LLC. All Rights Reserved.

Inventing stuff is hard

Inheritance Machining 2025-05-09 | Thank you to Henson Shaving for sponsoring this video! Use code INHERITANCE to get 100 free blade refills at http://hensonshaving.com/inheritance make sure both products are in the cart for the code to take effect!

Try Onshape Professional for free up to 6 months https://Onshape.pro/InheritanceMachining

I'm finally tackling one of the great frontiers of lathe work... with a ball turner(ish)! A half formed idea has been floating around in my head for literally 2 years at this point... so rather than wait 2 more years for the rest of it to form, I'm just diving in. Without a plan. Mostly.

#inheritancemachining #machineshop #hobbymachinist

For all sponsorship inquiries, please contact inheritancemachining@adhesivemedia.com.

Patreon - patreon.com/inheritancemachining
Drawings Store - inheritancemachining.com/?product_tag=drawings
Merch - inheritance-machining.myspreadshop.com
Instagram - instagram.com/inheritancemachining
Amazon Store (affiliate) - amazon.com/shop/inheritancemachining

Thank you again to the Micrometer level Patreon members listed at the end of the video!

TIMESTAMPS

0:00 Runout ...of waiting
1:36 What's the big idea here?
3:28 Metalethargy
5:30 A whole new man
8:11 A little help
10:12 The art of indirection
11:46 I need therapy
13:40 A natural selection
16:00 A distinct lack of planning
17:35 A broach too far
19:13 Don't get no harder.

FAQ
Drafting Equipment (affiliate links): amzn.to/3P0HvMe
A/V Equipment (affiliate links): amzn.to/3Pi45jB
Editing: Final Cut Pro X
Intro Song: Way Back Way Back When (Instrumental Version) - Gamma Skies
epidemicsound.com/track/SQxEhTVi9I/\

This video is sponsored by Henson Shaving.
This video is sponsored by Onshape.

youtu.be/fTdPXt-jLGo

© 2025 Inheritance Machining, LLC. All Rights Reserved.

A mistake... 3 years in the making

Inheritance Machining 2025-04-18 | Try Onshape Professional for free up to 6 months https://Onshape.pro/InheritanceMachining

SendCutSend - 15% off laser cut parts: http://sendcutsend.com/inheritance

Level fixture drawings - inheritancemachining.com/product/lathealignmentfixture-2

BambuLab Affiliate Link - shareasale.com/r.cfm?b=2354729&u=4548275&m=138211&urllink=&afftrack=

It's pretty common for me to make mistakes. We all know this by now. But I'm usually good about correcting them in the moment when they happen. Not... THREE YEARS LATER! In my defense I didn't know what I didn't know. So let's learn a lesson the hard way. The long, frustrating, and hard way.

#inheritancemachining #machineshop #hobbymachinist

For all sponsorship inquiries, please contact inheritancemachining@adhesivemedia.com.

Patreon - patreon.com/inheritancemachining
Drawings Store - inheritancemachining.com/?product_tag=drawings
Merch - inheritance-machining.myspreadshop.com
Instagram - instagram.com/inheritancemachining
Amazon Store (affiliate) - amazon.com/shop/inheritancemachining

Thank you again to the Micrometer level Patreon members listed at the end of the video!

TIMESTAMPS

0:00 WAY too long
1:35 WAYing the problem
3:16 A better WAY
4:30 Make WAY
6:49 WAY off track
8:43 Every which WAY
9:56 The other WAY 'round
12:57 HalfWAY there
14:28 No freaking WAY
15:15 Every which WAY
17:04 WAYt a minute
18:44 Making headWAY
20:52 Blown aWAY

FAQ
Drafting Equipment (affiliate links): amzn.to/3P0HvMe
A/V Equipment (affiliate links): amzn.to/3Pi45jB
Editing: Final Cut Pro X
Intro Song: Way Back Way Back When (Instrumental Version) - Gamma Skies
epidemicsound.com/track/SQxEhTVi9I/\

This video was sponsored by Onshape.
This video was sponsored by SendCutSend.

youtu.be/oSZx2JO5aMU

© 2025 Inheritance Machining, LLC. All Rights Reserved.

Polished parts WITHOUT Polishing

Inheritance Machining 2025-02-28 | Take your personal data back with Incogni! Use code INHERITANCE at the link below and get 60% off an annual plan: http://incogni.com/inheritance

Get started with Onshape at https://Onshape.pro/InheritanceMachining

Drawing for this build can be found here:
inheritancemachining.com/product/mill-ball-burnisher

#inheritancemachining #machineshop #hobbymachinist

For all sponsorship inquiries, please contact inheritancemachining@adhesivemedia.com.

Patreon - patreon.com/inheritancemachining
Drawings Store - inheritancemachining.com/?product_tag=drawings
Merch - inheritance-machining.myspreadshop.com
Instagram - instagram.com/inheritancemachining
Amazon Store (affiliate) - amazon.com/shop/inheritancemachining

Thank you again to the Micrometer level Patreon members listed at the end of the video!

TIMESTAMPS

0:00 This Video
1:00 Jumping Ahead
2:37 Losing My Sineity
7:09 This part is nut
8:28 Finding Safe Arbor
10:04 A link to the past
12:10 Trepanation
15:10 Five's a crowd
17:06 Zhuzh it up.
19:54 Trial
22:25 And Error

FAQ
Drafting Equipment (affiliate links): amzn.to/3P0HvMe
A/V Equipment (affiliate links): amzn.to/3Pi45jB
Editing: Final Cut Pro X
Intro Song: Way Back Way Back When (Instrumental Version) - Gamma Skies
epidemicsound.com/track/SQxEhTVi9I/\

This video was sponsored by Incogni.
This video was sponsored by Onshape.

youtu.be/imxnpvtXNv4

© 2025 Inheritance Machining, LLC. All Rights Reserved.

When Failure is the Best Option

Inheritance Machining 2025-02-07 | Get started with Onshape at https://Onshape.pro/InheritanceMachining

Machining being what it is, there are always new techniques to use... or better put, attempt. New isn't exactly the right word either. But new to me! So let's give burnishing a go!

Get the plans for this build here:
inheritancemachining.com/product/latheballburnisher

#inheritancemachining #machineshop #hobbymachinist

For all sponsorship inquiries, please contact inheritancemachining@adhesivemedia.com.

Patreon - patreon.com/inheritancemachining
Drawings Store - inheritancemachining.com/?product_tag=drawings
Merch - inheritance-machining.myspreadshop.com
Instagram - instagram.com/inheritancemachining
Amazon Store (affiliate) - amazon.com/shop/inheritancemachining

Thank you again to the Micrometer level Patreon members listed at the end of the video!

TIMESTAMPS

0:00 I WANT THAYUT
3:27 Machining Legs
5:50 Move yo bodeh
8:42 No seals were harmed
10:34 Just make it harder
13:32 Cap in your feather
14:54 I hate it
16:03 No idea what Im doing
18:23 Citrusy

FAQ
Drafting Equipment (affiliate links): amzn.to/3P0HvMe
A/V Equipment (affiliate links): amzn.to/3Pi45jB
Editing: Final Cut Pro X
Intro Song: Way Back Way Back When (Instrumental Version) - Gamma Skies
epidemicsound.com/track/SQxEhTVi9I/\

This video is sponsored by Onshape.

youtu.be/S5CNM-H1eFM

© 2025 Inheritance Machining, LLC. All Rights Reserved.

She asked for coasters... so I made her a CLOCK

Inheritance Machining 2025-01-17 | Go to shareasale.com/r.cfm?b=2354729&u=4548275&m=138211&urllink=&afftrack= to check out the X1C, filaments and more!
#bambulab #bambulabA1 #bambulabp1s #bambulabs

Engineers get Onshape Professional up to 6 Months Free: https://Onshape.pro/InheritanceMachining

Get the IM Shop Magnet here! inheritancemachining.com/product/shopmagnet

---

For all sponsorship inquiries, please contact inheritancemachining@adhesivemedia.com.

Patreon - patreon.com/inheritancemachining
Drawings Store - inheritancemachining.com/?product_tag=drawings
Merch - inheritance-machining.myspreadshop.com
Instagram - instagram.com/inheritancemachining
Amazon Store (affiliate) - amazon.com/shop/inheritancemachining

Thank you again to the Micrometer level Patreon members listed at the end of the video!

TIMESTAMPS

0:00 Matrimony
0:59 Something Old
2:56 Something New
5:14 Half is better than nothing
8:30 Bridge Crossing
10:44 Something Borrowed
13:05 The "fun" part
16:54 Make A Stand
18:52 When in Doubt... cut it off
20:47 Something Blew.... her away!

FAQ
Drafting Equipment (affiliate links): amzn.to/3P0HvMe
A/V Equipment (affiliate links): amzn.to/3Pi45jB
Editing: Final Cut Pro X
Intro Song: Way Back Way Back When (Instrumental Version) - Gamma Skies
epidemicsound.com/track/SQxEhTVi9I/\

This video was sponsored by BambuLab.
This video was sponsored by Onshape

youtu.be/8TfCJuFrRtw

© 2025 Inheritance Machining, LLC. All Rights Reserved.

Making a Puzzle Solvers DREAM

Inheritance Machining 2024-12-27 | Engineers get Onshape Professional up to 6 Months Free: https://Onshape.pro/InheritanceMachining

Puzzle Build Drawings:
inheritancemachining.com/product/jailbreak-puzzle

It's been long enough. While my first puzzle over a year ago was a success... it was also incredibly underwhelming in a lot of ways. Namely how easy it was to solve once you knew the solution. Just didn't tickle my fancy. This time is different. Not only did I set out to make a puzzle that's hard to solve... but also hard to RE-solve. And guess who I chose as my first victim? 😈

#inheritancemachining #machineshop #hobbymachinist

This video was sponsored by Onshape.

For all sponsorship inquiries, please contact inheritancemachining@adhesivemedia.com.

Patreon - patreon.com/inheritancemachining
Drawings Store - inheritancemachining.com/?product_tag=drawings
Merch - inheritance-machining.myspreadshop.com
Instagram - instagram.com/inheritancemachining
Amazon Store (affiliate) - amazon.com/shop/inheritancemachining

Thank you again to the Micrometer level Patreon members listed at the end of the video!

TIMESTAMPS

0:00 Intro
0:56 Bipolar
2:57 Designers Bloque
5:07 Risk it for the Biscuit
7:05 Brain Blast
9:20 Take 2
11:12 Screwed… again
12:36 Exactly the Different
13:54 My signature move
16:21 Guinnea Paige
20:08 I double dare you

FAQ
Drafting Equipment (affiliate links): amzn.to/3P0HvMe
A/V Equipment (affiliate links): amzn.to/3Pi45jB
Editing: Final Cut Pro X
Intro Song: Way Back Way Back When (Instrumental Version) - Gamma Skies
epidemicsound.com/track/SQxEhTVi9I/\

youtu.be/FkZ4EU7lR-c

© 2024 Inheritance Machining, LLC. All Rights Reserved.

When the WRONG tools find the RIGHT job

Inheritance Machining 2024-12-06 | Take your personal data back with Incogni! Use code INHERITANCE at the link below and get 60% off an annual plan: http://incogni.com/inheritance

This video is sponsored by Incogni.

This week I'm taking on another one of those race car parts that should really be reserved for a CNC. But I like a good challenge. And somewhere along the line the lathe got involved... maybe challenge isn't the right word for it 0_o

Formula Kentucky Donations - https://give.uky.edu/campaigns/47163/donations/new?designation_id=1215399110&amt=75.00

#inheritancemachining #machineshop #hobbymachinist

For all sponsorship inquiries, please contact inheritancemachining@adhesivemedia.com.

Patreon - patreon.com/inheritancemachining
Drawings Store - inheritancemachining.com/?product_tag=drawings
Merch - inheritance-machining.myspreadshop.com
Instagram - instagram.com/inheritancemachining
Amazon Store (affiliate) - amazon.com/shop/inheritancemachining

Thank you again to the Micrometer level Patreon members listed at the end of the video!

TIMESTAMPS

0:00 Liberties
1:54 I Have A Problem
4:36 Safety Squints
6:25 Decorative Embellishment
9:23 A Rare Pragmatist Appears
11:14 Not all Curves Are Holes
12:55 Happy Mills, Happy Bills
14:52 She'll be milling 'round the corner when she comes
17:08 Standing Ovation

FAQ
Drafting Equipment (affiliate links): amzn.to/3P0HvMe
A/V Equipment (affiliate links): amzn.to/3Pi45jB
Editing: Final Cut Pro X
Intro Song: Way Back Way Back When (Instrumental Version) - Gamma Skies
epidemicsound.com/track/SQxEhTVi9I/\

youtu.be/thgWnGAhmzo

© 2024 Inheritance Machining, LLC. All Rights Reserved.

Only Showoffs Do Things Once

Inheritance Machining 2024-11-15 | Get up to 47% the best holiday gift using my link: ridge.com/inheritance

This video was sponsored by Ridge.

Nope you aren’t experiencing deja vu. I’m just stubbornly determined to make a this damned lead screw. And as expected, it went completely unexpectedly. Largely because of the thickness of my skull. But also because… something something uncharted territory.

#inheritancemachining #machineshop #hobbymachinist

For all sponsorship inquiries, please contact inheritancemachining@adhesivemedia.com.

Patreon - patreon.com/inheritancemachining
Drawings Store - inheritancemachining.com/?product_tag=drawings
Merch - inheritance-machining.myspreadshop.com
Instagram - instagram.com/inheritancemachining
Amazon Store (affiliate) - amazon.com/shop/inheritancemachining

Thank you again to the Micrometer level Patreon members listed at the end of the video!

TIMESTAMPS

0:00 We’re Back
1:02 I’m Not Dense…
3:29 Slim Dense
4:38 Common Dense
7:13 It Didn’t Stand a Dense
8:26 Came to my Denses
10:24 International Man of Density
12:43 It Don’t Make No Dense
14:15 SixDense None The Richer
17:05 Lap Dense
18:15 Just Put It In!

FAQ
Drafting Equipment (affiliate links): amzn.to/3P0HvMe
A/V Equipment (affiliate links): amzn.to/3Pi45jB
Editing: Final Cut Pro X
Intro Song: Way Back Way Back When (Instrumental Version) - Gamma Skies
epidemicsound.com/track/SQxEhTVi9I/\

youtu.be/QGC11ZScL4E

© 2024 Inheritance Machining, LLC. All Rights Reserved.

When You Save Money Making it Yourself

Inheritance Machining 2024-10-25 | Thank you to Henson Shaving for sponsoring this video! Use code INHERITANCE to get 100 free blade refills at http://hensonshaving.com/inheritance

Yes yes.. I've been away for a while... but I'm back with a banger. A tool I've needed basically since the beginning. A muhfuggin' heat treat oven, baby!

A huge thanks to @RedBeardOps for the inspiration and knowledge to make this build happen. His video is here - youtu.be/7FalYyVASyw?si=P-0i18Ibg1RvqhBc

I didn't put together any formal plans for this but I will list out some details and the items I used below (amazon links are affiliate so I do get a small kickback if you use them).

Power - 240V, 20A, 3200watts
Internal Dimensions - 4”H x 6”W x 18”D (100mm x 150mm x 450mm)
External Dimensions - 19"H x 198"W x 30"D (490mm x 460mm x 760mm)
Weight - 155lbs (70kg)
Material+Shipping Cost - ~$1800 US
Tooling Cost - ~$700 US

Materials
Fire Bricks (9x4.5x2.5) - amzn.to/4fhac0W
Fire Bricks (9x4.5x1.25) - amzn.to/4dYGGfp
High Temp Cement - amzn.to/4hfGV8V
Door Rope Gasket - amzn.to/3YC9XrW
16awg Kanthal A1 Wire - amzn.to/3NFil3Q
Ceramic terminal blocks - amzn.to/4ff8Cgj
PID Controller - amzn.to/48s9z2z
Solid State Relays - amzn.to/3YhUZWI
Heat Sink Compound - amzn.to/48j5dL4
Thermocouple - amzn.to/3Ydwwlo
Thermocouple wire - kilnparts.com/products/1250004?_pos=1&_sid=f3fc693aa&_ss=r
Cooling Fan - amzn.to/48s9DiP
Power Switch - amzn.to/4hlhwdM
Fuse Holders - amzn.to/3Ygquk1
2A Fuses - amzn.to/40ou9Pc
20A Fuses - amzn.to/40jaaSa
Terminal Strips - amzn.to/4hllzXC
Limit Switch - amzn.to/40c5RYR
12awg wire - amzn.to/3NE7tTz
10/3awg cable - amzn.to/4eWTTGT
240V 20A plug - amzn.to/3Ao1M9g
Spade Connectors - amzn.to/3ND48UR
Fork Connectors - amzn.to/4hjPpvF
Rivnuts - amzn.to/4fc6AgI
Pop Rivets - amzn.to/3UnhcS7
Handle - amzn.to/3BUEQ1P
Rubber Feet - amzn.to/3AdBp68

Tools
Rivnut Tool - amzn.to/4dTRn2Y
Terminal Crimper - amzn.to/40k1jzA
Ferrule Crimper - amzn.to/3NYG6Ed
Pop Rivet Tool - amzn.to/4eWWocf
30 in. 3-In-1 Shear, Press Brake, and Slip Roll - harborfreight.com

#inheritancemachining #machineshop #hobbymachinist

For all sponsorship inquiries, please contact inheritancemachining@adhesivemedia.com.

Patreon - patreon.com/inheritancemachining
Drawings Store - inheritancemachining.com/?product_tag=drawings
Merch - inheritance-machining.myspreadshop.com
Instagram - instagram.com/inheritancemachining
Amazon Store (affiliate) - amazon.com/shop/inheritancemachining

Thank you again to the Micrometer level Patreon members listed at the end of the video!

TIMESTAMPS

0:00 Intro
2:01 She’s a Brick… House
2:34 Paying Ohm’age
7:03 Mo Powah Babeh
8:43 Electron…ish
10:56 D’Press the D’Brake
12:11 Trimming
14:40 Mo Bricks
15:26 Electron…ics
17:05 Rounding the Corner
18:43 Not Proud… but Sore
20:09 Shell Games
22:13 The Dust Settles
23:18 Final Assembly… Finally
25:32 A Leg(z) to Stand On
28:28 Mortal Coils
29:52 A Mechanism Guy
32:55 Trials and Tribulations

FAQ
Drafting Equipment (affiliate links): amzn.to/3P0HvMe
A/V Equipment (affiliate links): amzn.to/3Pi45jB
Editing: Final Cut Pro X
Intro Song: Way Back Way Back When (Instrumental Version) - Gamma Skies
epidemicsound.com/track/SQxEhTVi9I/\

youtu.be/ByyT5XvQSag

© 2024 Inheritance Machining, LLC. All Rights Reserved.

So a lathe walks into a bar...

Inheritance Machining 2024-09-13 | Take your personal data back with Incogni! Use code INHERITANCE at the link below and get 60% off an annual plan: http://incogni.com/inheritance

This video was sponsored by Incogni.

What was the first thing I did when getting the free lathe? Measure how good it was. What was the second thing did? Pretend like that never happened. But not anymore. The time for a definitive test of the lathes performance has arrived... with a good old fashioned bar test. Not to be confused with the legal bar.... though that somehow seems fitting here too.

#inheritancemachining #machineshop #hobbymachinist

For all sponsorship inquiries, please contact inheritancemachining@adhesivemedia.com.

Patreon - patreon.com/inheritancemachining
Drawings Store - inheritancemachining.com/?product_tag=drawings
Merch - inheritance-machining.myspreadshop.com
Instagram - instagram.com/inheritancemachining
Amazon Store (affiliate) - amazon.com/shop/inheritancemachining

Thank you again to the Micrometer level Patreon members listed at the end of the video!

TIMESTAMPS

0:00 Grow a Pair
1:44 The Hard Part
3:54 It's live and it's center
7:22 Morse Code
12:29 Bar... none
14:07 Why is that even there?
16:04 Chasing my tail... stock
19:41 Doing the thing

FAQ
Drafting Equipment (affiliate links): amzn.to/3P0HvMe
A/V Equipment (affiliate links): amzn.to/3Pi45jB
Editing: Final Cut Pro X
Intro Song: Way Back Way Back When (Instrumental Version) - Gamma Skies
epidemicsound.com/track/SQxEhTVi9I/\

youtu.be/tLMvbief6fQ

© 2024 Inheritance Machining, LLC. All Rights Reserved.

You had one job (and you did it wrong)

Inheritance Machining 2024-08-23 | Use code INHERITANCE50 to get 50% OFF your first Factor box plus 20% off your next month of orders at bit.ly/46UBG9G!

This video was sponsored by Factor.

So I'm finally doing it. After 10 months I'm finally addressing the spindle play in the free lathe... And I could hardly believe what I found. Any guesses? The thumbnail is a good hint.

And Craig wants you know that he's never opened this lathe. Or even used it for that matter haha

Also curious to hear what you guys think of this different format?

#inheritancemachining #machineshop #hobbymachinist

Patreon - patreon.com/inheritancemachining
Drawings Store - inheritancemachining.com/?product_tag=drawings
Merch - inheritance-machining.myspreadshop.com
Instagram - instagram.com/inheritancemachining
Amazon Store (affiliate) - amazon.com/shop/inheritancemachining

Thank you again to the Micrometer level Patreon members listed at the end of the video!

TIMESTAMPS

0:00 Git In There!
2:51 Hammer Time.
5:16 A little too clean...
8:27 Pampering
11:18 There are Growers
13:04 And there are Showers
15:06 Just gotta shake it right
16:52 Poetry
18:33 Woooing her

FAQ
Drafting Equipment (affiliate links): amzn.to/3P0HvMe
A/V Equipment (affiliate links): amzn.to/3Pi45jB
Editing: Final Cut Pro X
Intro Song: Way Back Way Back When (Instrumental Version) - Gamma Skies
epidemicsound.com/track/SQxEhTVi9I/\

youtu.be/KVyeMKf4k3c

© 2024 Inheritance Machining, LLC. All Rights Reserved.

If It aint broke... try harder

Inheritance Machining 2024-08-02 | Sign up for a 14-day free trial and enjoy all the amazing features MyHeritage has to offer. bit.ly/InheritanceMachining

In the culmination of months of work making my own gear cutters we are back on the gifted lathe refurb making… another lead screw. Only this time it has an integrated gear. And is hardened… and is also… brittle. VERY brittle.

#inheritancemachining #machineshop #hobbymachinist

Patreon - patreon.com/inheritancemachining
Drawings Store - inheritancemachining.com/?product_tag=drawings
Merch - inheritance-machining.myspreadshop.com
Instagram - instagram.com/inheritancemachining
Amazon Store (affiliate) - amazon.com/shop/inheritancemachining

Thank you again to the Micrometer level Patreon members listed at the end of the video!

TIMESTAMPS

0:00 It was all for a reason
1:46 Heritage
3:42 I'd Tap That
6:51 O1 Kenobi
8:34 Hidden Enemy
10:50 Countermeasures
12:08 Screw This
14:17 All Geared Up
16:58 SMH
19:19 It's gettin' hot in here
22:18 Time to Bow Out

FAQ
Drafting Equipment (affiliate links): amzn.to/3P0HvMe
A/V Equipment (affiliate links): amzn.to/3Pi45jB
Editing: Final Cut Pro X
Intro Song: Way Back Way Back When (Instrumental Version) - Gamma Skies
epidemicsound.com/track/SQxEhTVi9I/\

youtu.be/nClw85G0c-w

This video is sponsored by MyHeritage.

© 2024 Inheritance Machining, LLC. All Rights Reserved.

Involuter? I barely know her!

Inheritance Machining 2024-07-12 | To try everything Brilliant has to offer—free—for a full 30 days, visit brilliant.org/Inheritance . You’ll also get 20% off an annual premium subscription.

This video was sponsored by Brilliant

Making gears is something a lot take for granted. Including me. But when you use techniques from 100 years ago, and start from scratch, well... Let's just say this may be the last time you see me this!

Gears and Gear Cutting Book (affiliate link) - amzn.to/3WtS4ep

#inheritancemachining #machineshop #hobbymachinist

Patreon - patreon.com/inheritancemachining
Drawings Store - inheritancemachining.com/?product_tag=drawings
Merch - inheritance-machining.myspreadshop.com
Instagram - instagram.com/inheritancemachining
Amazon Store (affiliate) - amazon.com/shop/inheritancemachining

Thank you again to the Micrometer level Patreon members listed at the end of the video!

TIMESTAMPS

0:00 Special Teeth
3:24 Hold my butt(on)
4:37 Involute-ish
6:04 Getting my grinding fix(ture)
7:58 Math is hard
9:02 We're gonna need some teeth
12:08 If you have the tool... use it!
13:37 Not as bad as it looks
15:38 Comic relief
17:08 Bring your wife to work day!
21:56 Gear Time!

FAQ
Drafting Equipment (affiliate links): amzn.to/3P0HvMe
A/V Equipment (affiliate links): amzn.to/3Pi45jB
Editing: Final Cut Pro X
Intro Song: Way Back Way Back When (Instrumental Version) - Gamma Skies
epidemicsound.com/track/SQxEhTVi9I/\

youtu.be/cJO8K2IILhs

© 2024 Inheritance Machining, LLC. All Rights Reserved.

The Rest of a Great Idea

Inheritance Machining 2024-06-21 | Thank you Helix Sleep for sponsoring! Click here helixsleep.com/inheritancemachining to get 30% off an Elite or Luxe mattress (plus two FREE pillows!) – or take 25% off sitewide – during their Fourth of July Sale. If you miss this limited time offer, you can still get 20% off using my link! Offers subject to change. #helixsleep

Where's the best place to pick up? Where you left off of course. Just because I got a little sidetracked by a little cross country road trip last video doesn't mean I've forgotten Yee Olde Eureka tool. So let's finish it off. And maybe we'll even demonstrate the beautiful movement it makes on a "gear cutter" ;)

Gears and Gear Cutting Book (affiliate link) - amzn.to/3WtS4ep

#inheritancemachining #machineshop #hobbymachinist

Patreon - patreon.com/inheritancemachining
Drawings Store - inheritancemachining.com/?product_tag=drawings
Merch - inheritance-machining.myspreadshop.com
Instagram - instagram.com/inheritancemachining
Amazon Store (affiliate) - amazon.com/shop/inheritancemachining

Thank you again to the Micrometer level Patreon members listed at the end of the video!

TIMESTAMPS

0:00 Participation Award
1:16 Where we left off
3:33 Do -n't- be a square.
9:52 This part is Nut(s)
12:31 Pray for good metal.
16:39 Don't pawls the video now...
18:09 Backing Vocals
19:56 A little spring in my step
22:33 Review with Head of Engineering

FAQ
Drafting Equipment (affiliate links): amzn.to/3P0HvMe
A/V Equipment (affiliate links): amzn.to/3Pi45jB
Editing: Final Cut Pro X
Intro Song: Way Back Way Back When (Instrumental Version) - Gamma Skies
epidemicsound.com/track/SQxEhTVi9I/\

This video was sponsored by Helix Sleep.

youtu.be/A4vsKNpxKvk

© 2024 Inheritance Machining, LLC. All Rights Reserved.

Saving the Machine the World Forgot

Inheritance Machining 2024-05-31 | Save up to 40% off the greatest gift using my link ridge.com/inheritance. Sponsored by Ridge.

Get the #CHAMFERIT block (SOLD OUT) - inheritancemachining.com/chamferit

Yes… I’m in the middle of another project. But when an opportunity presents itself to… obtain a piece of machining history that I’ve always wanted, I would be a fool to not drop everything and drive across the country to get it. Doesn’t hurt that I love road trips!

#inheritancemachining #machineshop #hobbymachinist

Patreon - patreon.com/inheritancemachining
Drawings Store - inheritancemachining.com/?product_tag=drawings
Merch - inheritance-machining.myspreadshop.com
Instagram - instagram.com/inheritancemachining
Amazon Store (affiliate) - amazon.com/shop/inheritancemachining

Thank you again to the Micrometer level Patreon members listed at the end of the video!

TIMESTAMPS

0:00 ROAD TRIP!
4:13 Getting Acquainted
5:55 What's the Surprise?
7:52 Make Room while the Sun Shines
9:45 Button Puckery
12:24 Rubba dub dub
15:10 Simple is as Simple Doesn't
17:05 Smaller I say!
19:27 Swoopedy
19:58 I'll call your 2D and raise you 3!
22:47 Show and Tell
24:23 She's A Natural!

FAQ
Drafting Equipment (affiliate links): amzn.to/3P0HvMe
A/V Equipment (affiliate links): amzn.to/3Pi45jB
Editing: Final Cut Pro X
Intro Song: Way Back Way Back When (Instrumental Version) - Gamma Skies
epidemicsound.com/track/SQxEhTVi9I/\

youtu.be/7am-ysvGD3s

© 2024 Inheritance Machining, LLC. All Rights Reserved.

Half of a Great Idea

Inheritance Machining 2024-05-10 | Thank you to Henson Shaving for sponsoring this video! Use code INHERITANCE to get 100 free blade refills at http://hensonshaving.com/inheritance

Gears and Gear Cutting Book (affiliate link) - amzn.to/3WtS4ep

How have I managed to avoid this core component of a machinists’ repertoire for so long? The time has come… for gears. But I like making tools a lot more than I like making not tools. So before I can make any gear, naturally, I need to make the gear cutter. Which requires making a few other tools, too. So many tools, in fact, that it will take me two videos to finish this project. And maybe by the end of this adventure I will properly be able to say "Eureka!".

#inheritancemachining #machineshop #hobbymachinist

Patreon - patreon.com/inheritancemachining
Drawings Store - inheritancemachining.com/?product_tag=drawings
Merch - inheritance-machining.myspreadshop.com
Instagram - instagram.com/inheritancemachining
Amazon Store (affiliate) - amazon.com/shop/inheritancemachining

Thank you again to the Micrometer level Patreon members listed at the end of the video!

TIMESTAMPS

0:00 Noob
0:55 Flirtation
3:21 Razor Spaghetti
7:19 A Little Pickle
9:45 Let’s Turn It Up A Notch
11:09 Back To The Bronze Age
13:59 You Won’t Believe It
15:14 Proper Sexy Chamfers
18:08 Little Hairy Pawls
20:46 Screw This
21:29 Spring Is Coming
22:57 Show and Tell

FAQ
Drafting Equipment (affiliate links): amzn.to/3P0HvMe
A/V Equipment (affiliate links): amzn.to/3Pi45jB
Editing: Final Cut Pro X
Intro Song: Way Back Way Back When (Instrumental Version) - Gamma Skies
epidemicsound.com/track/SQxEhTVi9I/\

youtu.be/qGsQl4FQFbQ

© 2024 Inheritance Machining, LLC. All Rights Reserved.

How a machinist does woodworking...

Inheritance Machining 2024-04-19 | To try everything Brilliant has to offer—free—for a full 30 days, visit brilliant.org/Inheritance. You’ll also get 20% off an annual premium subscription. This video was sponsored by Brilliant.

Shout out to Rowan @noengineerhere for finally overflowing my shame capacity of the Box of Shame with your fanmail. The box said, “Yum!” Now, to make room for some more of my future foibles… Let’s make a bigger box!

#inheritancemachining #machineshop #hobbymachinist

Patreon - patreon.com/inheritancemachining
Drawings Store - inheritancemachining.com/?product_tag=drawings
Merch - inheritance-machining.myspreadshop.com
Instagram - instagram.com/inheritancemachining
Amazon Store (affiliate) - amazon.com/shop/inheritancemachining

Thank you again to the Micrometer level Patreon members listed at the end of the video!

TIMESTAMPS

0:00 Special Delivery
1:18 Loose Premise
2:28 Let’s Get Physical
5:44 Woodn’t It Be Nice
7:49 **Precisely 15 Degrees
9:33 Wrong Brain Mode
11:09 Exactly Incorrect
14:17 I’ll Tell You When You’re Older
16:00 Gratuitous Milling and Drilling
17:25 What Come’s Around
18:15 Screw It
19:53 Wewd
21:51 Fire
22:35 More Sticky
26:07 Wait For it…

FAQ
Drafting Equipment (affiliate links): amzn.to/3P0HvMe
A/V Equipment (affiliate links): amzn.to/3Pi45jB
Editing: Final Cut Pro X
Intro Song: Way Back Way Back When (Instrumental Version) - Gamma Skies
epidemicsound.com/track/SQxEhTVi9I/\

youtu.be/uQQH8XzlgVU

© 2024 Inheritance Machining, LLC. All Rights Reserved.

Chasing my own Tail(stock)

Inheritance Machining 2024-03-29 | Thank you Incogni for sponsoring this video! Take your personal data back with Incogni! Use code INHERITANCE at the link below and get 60% off an annual plan: http://incogni.com/INHERITANCE

The lathe has been glaring at me for 4 months, it’s time to put it to work. And by "it", I mean me.Which, as you might expect, never goes quickly. And while I can’t promise a super satisfying reveal, can I tempt you with a negative side project total? Who would have believed it?!

#inheritancemachining #machineshop #hobbymachinist

Patreon - patreon.com/inheritancemachining
Drawings Store - inheritancemachining.com/?product_tag=drawings
Merch - inheritance-machining.myspreadshop.com
Instagram - instagram.com/inheritancemachining
Amazon Store (affiliate) - amazon.com/shop/inheritancemachining

Thank you again to the Micrometer level Patreon members listed at the end of the video!

TIMESTAMPS

0:00 Intro
0:55 Two Is Better Than Zero
2:04 Simple is... Boring
3:37 I Overthunkit
6:18 A Little Over Dressed
8:22 *sniff sniff*
10:08 Spring Break, Baby!
11:33 What's that tickin' Noise?
12:52 Gettin' Smok'd
14:56 Hyperbolic, Dontchathink?
16:58 Rookie Mistake
18:27 Indecent EXPOsure
19:45 Hot Date

FAQ
Drafting Equipment (affiliate links): amzn.to/3P0HvMe
A/V Equipment (affiliate links): amzn.to/3Pi45jB
Editing: Final Cut Pro X
Intro Song: Way Back Way Back When (Instrumental Version) - Gamma Skies
epidemicsound.com/track/SQxEhTVi9I/\

This video was sponsored by Incogni.

youtu.be/Z6S64XlAALA

© 2024 Inheritance Machining, LLC. All Rights Reserved.

Mobius Strip? Nah... Mobius CUBE!

Inheritance Machining 2024-03-15 | Thank you to Henson Shaving for sponsoring this video! Use code INHERITANCE to get 100 free blade refills at http://hensonshaving.com/inheritance

3D Model Download - inheritancemachining.com/?post_type=product&p=1580

I tend to always make tools but sometimes you get an itch that you just have to scratch. And of course what I thought would be a “simple catch up project” ended up being one of the hardest things I’ve made to date. Partially due to the complexity, and mostly due to the lack of planning I put into actually making it. Oh and something about the Young’s modulus.

#inheritancemachining #machineshop #hobbymachinist

Patreon - patreon.com/inheritancemachining
Drawings Store - inheritancemachining.com/?product_tag=drawings
Merch - inheritance-machining.myspreadshop.com
Instagram - instagram.com/inheritancemachining
Amazon Store (affiliate) - amazon.com/shop/inheritancemachining

Thank you again to the Micrometer level Patreon members listed at the end of the video!

TIMESTAMPS

0:00 Spoilers
2:02 Step 1: Add More Sides
4:26 A Whole.... Lotta Holes
6:55 Sexy-ing It Up
9:31 Complacency Kills
10:14 Slant'der
12:44 Cutting Corners
14:40 Surprise. I Have A Welder
16:34 Nether Regions
17:55 Young's Modulus My Ass
19:58 Definitions
21:24 A Roundabout Way To Do It
23:23 Finish-ish...
24:15 It's A Mathematical Fact

FAQ
Drafting Equipment (affiliate links): amzn.to/3P0HvMe
A/V Equipment (affiliate links): amzn.to/3Pi45jB
Editing: Final Cut Pro X
Intro Song: Way Back Way Back When (Instrumental Version) - Gamma Skies
epidemicsound.com/track/SQxEhTVi9I/\

This video was sponsored by Henson Shaving.

youtu.be/ICaUFUJgCWc

© 2024 Inheritance Machining, LLC. All Rights Reserved.

GRINDING On All Cylinders

Inheritance Machining 2024-02-16 | Use my link amazon.lumineuxhealth.com/amazon/InheritanceMachining to get $10 off your Lumineux Electric Toothbrush on Amazon!

No really... this changed everything. All my tooling to this date has missed one thing. Hardening. Hardening means grinding. And grinding I can't do (sortof). But not anymore!

#inheritancemachining #machineshop #hobbymachinist

Nathan's Company (the tool gifter) - tecindustrialinc.com

Patreon - patreon.com/inheritancemachining
Drawings Store - inheritancemachining.com/?product_tag=drawings
Merch - inheritance-machining.myspreadshop.com
Instagram - instagram.com/inheritancemachining
Amazon Store (affiliate) - amazon.com/shop/inheritancemachining

Thank you again to the Micrometer level Patreon members listed at the end of the video!

TIMESTAMPS

0:00 It Has Arrived!
2:02 What's in the Damn Box?!
4:18 TLC (Tenderly Lubricated and Cleaned)
9:10 Like "New"
11:15 The Boring Part
13:30 You Raise Me Up
16:43 The Mother of All Side Projects
18:07 Time to TURN it Up A Notch
20:58 Thingamabobs
23:45 Simple is as Simple Don't
24:38 Doughnuts
26:35 Say It Ain't True
27:47 Something Something Time Management

FAQ
Drafting Equipment (affiliate links): amzn.to/3P0HvMe
A/V Equipment (affiliate links): amzn.to/3Pi45jB
Editing: Final Cut Pro X
Intro Song: Way Back Way Back When (Instrumental Version) - Gamma Skies
epidemicsound.com/track/SQxEhTVi9I/\

This video is sponsored by Lumineux.

youtu.be/koQ4bcHrPJk

© 2024 Inheritance Machining, LLC. All Rights Reserved.

I Raced a $600,000 CNC Machine

Inheritance Machining 2024-02-02 | To try everything Brilliant has to offer—free—for a full 30 days, visit brilliant.org/inheritance. The first 200 of you will get 20% off Brilliant's annual premium subscription.

Taking on a part that was most definitely meant for CNC seems like a good way to spend a week at the mill. But where’s the fun unless I’m racing an actual CNC machine. Time to put my machines where my mouth is.

Machine Time (Craig’s CNC Shop) - machinetime.com

Support Formula Kentucky- https://sae.engr.uky.edu/sponsorship

#inheritancemachining #machineshop #hobbymachinist

Patreon - patreon.com/inheritancemachining
Drawings Store - inheritancemachining.com/?product_tag=drawings
Merch - inheritance-machining.myspreadshop.com
Instagram - instagram.com/inheritancemachining
Amazon Store (affiliate) - amazon.com/shop/inheritancemachining

Thank you again to the Micrometer level Patreon members listed at the end of the video!

TIMESTAMPS

0:00 Feeling Cocky
1:15 Ready... Set... NO
3:27 The Path Less Travelled
4:48 Don't Be a Square
7:22 How Boring
9:00 Sweeping Up
10:44 It's A Clevis, You Beavis
12:26 I Would Never Do That
13:57 What You're All Here For
15:22 The Right Way 'Round
17:26 Angles and Rounds
19:15 Sabatoge
21:06 Now It's A Race
22:18 Two Sides to Every... Part
23:49 DRAMATIC ENDING
25:24 The Results Are In

FAQ
Drafting Equipment (affiliate links): amzn.to/3P0HvMe
A/V Equipment (affiliate links): amzn.to/3Pi45jB
Editing: Final Cut Pro X
Intro Song: Way Back Way Back When (Instrumental Version) - Gamma Skies
epidemicsound.com/track/SQxEhTVi9I/\

This video was sponsored by Brilliant.

youtu.be/Q3sjsu1FPCk

© 2024 Inheritance Machining, LLC. All Rights Reserved.

WANTED: Dead or a LIVE CENTER

Inheritance Machining 2024-01-19 | Thank you to Henson Shaving for sponsoring this video! Use code INHERITANCE to get 100 free blade refills at http://hensonshaving.com/inheritance

Get Drawings for this Project here! - inheritancemachining.com/?product=livecenter

New Lathe. No Tooling. What's a guy to do? Make everything he's missing of course! Never mind that the lathe has its own set of issues. But this is related to solving those. I swear... or "putting the cart before the horse" is my middle name.

#inheritancemachining #machineshop #hobbymachinist

Patreon - patreon.com/inheritancemachining
Drawings Store - inheritancemachining.com/?product_tag=drawings
Merch - inheritance-machining.myspreadshop.com
Instagram - instagram.com/inheritancemachining
Amazon Store (affiliate) - amazon.com/shop/inheritancemachining

Thank you again to the Micrometer level Patreon members listed at the end of the video!

TIMESTAMPS

0:00 Intro
1:01 Cheaper By The Dozen
2:16 Concentricity
6:43 I Told You This was Boring
8:29 The Morse Code
10:51 Between a Center... And a Center
15:29 Loose Ends
16:05 Because Pretty, Thats Why
17:44 This Is Nuts
19:08 De-derpification
20:25 Define "Smoothly"
22:09 Turds Make Turds

FAQ
Drafting Equipment (affiliate links): amzn.to/3P0HvMe
A/V Equipment (affiliate links): amzn.to/3Pi45jB
Editing: Final Cut Pro X
Intro Song: Way Back Way Back When (Instrumental Version) - Gamma Skies
epidemicsound.com/track/SQxEhTVi9I/\

This Video is sponsored by Henson Shaving.

youtu.be/EsOgG7nIWo4

© 2024 Inheritance Machining, LLC. All Rights Reserved.

Just A SIMPLE Repair

Inheritance Machining 2023-12-22 | Use code Inheritance10 and get 10% off Shapr3D when you download Shapr3D for iPad, macOS, & Windows: link.shapr3d.com/cd83c2

This video is sponsored by Shapr3D.

Ignoring the larger issues with the "new" lathe in favor of a simple project. Remaking the lead screw and nuts for the compound slide. Little did I know simple... does not mean easy...

#inheritancemachining #machineshop #hobbymachinist

Patreon (Early Access + Ad Free + Drawings) - patreon.com/inheritancemachining
Drawings Store - inheritancemachining.com/?product_tag=drawings
Merch: inheritance-machining.myspreadshop.com
Instagram - instagram.com/inheritancemachining
Website - inheritancemachining.com
Amazon Storefront (affiliate links): amazon.com/shop/inheritancemachining

Thank you again to the Micrometer level Patreon members listed at the end of the video!

TIMESTAMPS

0:00 Spoiler Alert
1:20 Le Probleme
3:30 Civility
5:29 A Worthy Investment
7:39A before B (but also C and D)
11:07 Trigonom-ish
13:08 Two Firsts
16:48 A Milling Problem But a Center Ain't One
18:27 Brrrr
20:00 Killing Time...
21:31 Climax
24:18 MOAR THREADS
26:39 Bringing It All Together

FAQ
Drafting Equipment (affiliate links): amzn.to/3P0HvMe
A/V Equipment (affiliate links): amzn.to/3Pi45jB
Editing: Final Cut Pro X
Intro Song: Way Back Way Back When (Instrumental Version) - Gamma Skies
epidemicsound.com/track/SQxEhTVi9I/\

youtu.be/1l2_uCyBXQ0

© 2023 Inheritance Machining, LLC. All Rights Reserved.

This Tool Shows My FUTURE

Inheritance Machining 2023-12-08 | To try everything Brilliant has to offer—free—for a full 30 days, visit brilliant.org/inheritance. The first 200 of you will get 20% off Brilliant's annual premium subscription.

This video was sponsored by Brilliant.

We've all seen the new lathe looks like it was ridden hard and put away wet... but how bad is it actually? The answer may surprise you...

#inheritancemachining #machineshop #hobbymachinist

Patreon (Early Access + Ad Free + Drawings) - patreon.com/inheritancemachining
Drawings Store - inheritancemachining.com/?product_tag=drawings
Merch: inheritance-machining.myspreadshop.com
Instagram - instagram.com/inheritancemachining
Website - inheritancemachining.com
Amazon Storefront (affiliate links): amazon.com/shop/inheritancemachining

Thank you again to the Micrometer level Patreon members listed at the end of the video!

TIMESTAMPS

0:00 Intro
1:02 RIght Off The Bat
3:41 Leveling Up
6:08 Three's Company
8:10 But Why 5?
11:35 One Last Thing
12:38 Plot Twist
15:01 Brain Shart
16:05 Third Time’s The Charm
17:06 You Naughty Thing, You
18:41 But Wait! There’s More!

FAQ
Drafting Equipment (affiliate links): amzn.to/3P0HvMe
A/V Equipment (affiliate links): amzn.to/3Pi45jB
Editing: Final Cut Pro X
Intro Song: Way Back Way Back When (Instrumental Version) - Gamma Skies
epidemicsound.com/track/SQxEhTVi9I/\

youtu.be/lkbowia7isM

© 2023 Inheritance Machining, LLC. All Rights Reserved.

Getting the BEST Precision Lathe for FREE

Inheritance Machining 2023-11-24 | Go to https://sponsr.is/cs_inheritancemachining and use code INHERITANCEMACHINING to save 25% off today. Thanks to Curiosity Stream for sponsoring today’s video.

So… something happened that I never thought would happen. I was given something. Something big. And something I’ve always wanted. No.. no.. get your mind out of the gutter. I promise you this is PG-13 (ish).

#inheritancemachining #machineshop #hobbymachinist

Craig’s Machine Shop - machinetime.com

Patreon (Early Access + Ad Free + Drawings) - patreon.com/inheritancemachining
Drawings Store - inheritancemachining.com/?product_tag=drawings
Merch: inheritance-machining.myspreadshop.com
Instagram - instagram.com/inheritancemachining
Website - inheritancemachining.com
Amazon Storefront (affiliate links): amazon.com/shop/inheritancemachining

Thank you again to the Micrometer level Patreon members listed at the end of the video!

TIMESTAMPS

0:00 Lack Of Planning
0:59 Santa Craig
3:33 Nothing But Smiles
5:38 Get the Move On
8:00 Nightmares
9:05 Rubbadubdub
10:40 Stop Screaming at the Screen
13:17 That Ain't Precision
15:05 It Ain't Level Til It's Level
16:33 Mo Powah Baby
18:00 Show Boatin'...
18:59 Chip Off The Old Block

FAQ
Drafting Equipment (affiliate links): amzn.to/3P0HvMe
A/V Equipment (affiliate links): amzn.to/3Pi45jB
Editing: Final Cut Pro X
Intro Song: Way Back Way Back When (Instrumental Version) - Gamma Skies
epidemicsound.com/track/SQxEhTVi9I/\

youtu.be/aVAQBr8fB3s

© 2023 Inheritance Machining, LLC. All Rights Reserved.

A Dish Best Served ROLLED

Inheritance Machining 2023-11-10 | A sticky subject for me… rotary broaching. I thought I had it figured out. But maybe not. So let’s build one not from my imagination this time.

#inheritancemachining #machineshop #hobbymachinist

Buy this kit here (not sponsored or affiliated): hemingwaykits.com/HK2570

Patreon (Early Access + Ad Free + Drawings) - patreon.com/inheritancemachining
Drawings Store - inheritancemachining.com/?product_tag=drawings
Merch: inheritance-machining.myspreadshop.com
Instagram - instagram.com/inheritancemachining
Website - inheritancemachining.com
Amazon Storefront (affiliate links): amazon.com/shop/inheritancemachining

Thank you again to the Micrometer level Patreon members listed at the end of the video!

TIMESTAMPS

0:00 Intro
1:06 Play Time
3:14 I tried…
6:49 Loose Ends
8:09 Shank You Very Much
11:06 This Part is Boring
13:01 PG-13
14:45 Reverse! Reverse!
17:31 Slant Touch This…
19:51 Is it drafty in here?
22:03 Baking with Brandon
24:36 And… ACTION!
26:22 Near Miss

FAQ
Drafting Equipment (affiliate links): amzn.to/3P0HvMe
A/V Equipment (affiliate links): amzn.to/3Pi45jB
Editing: Final Cut Pro X
Intro Song: Way Back Way Back When (Instrumental Version) - Gamma Skies
epidemicsound.com/track/SQxEhTVi9I/\

youtu.be/o_OWEGzi3Gk

© 2023 Inheritance Machining, LLC. All Rights Reserved.

Live Free or DIE HOLDER

Inheritance Machining 2023-10-27 | Single point threading is slow. Die wrench results are trash. Both have their merits though so let's make something that is the best of both worlds!

#inheritancemachining #machineshop #hobbymachinist

Buy this kit here (not sponsored or affiliated): hemingwaykits.com/tailstock-die-holder

Patreon (Early Access + Ad Free + Drawings) - patreon.com/inheritancemachining
Drawings Store - inheritancemachining.com/?product_tag=drawings
Merch: inheritance-machining.myspreadshop.com
Instagram - instagram.com/inheritancemachining
Website - inheritancemachining.com
Amazon Storefront (affiliate links): amazon.com/shop/inheritancemachining

Thank you again to the Micrometer level Patreon members listed at the end of the video!

TIMESTAMPS

0:00 Intro
0:57 Design-ish
3:07 You're being Hyperbolic!
6:37 A First Time for Everything
9:03 Won't Know Until We Try
10:57 Shortcuts
12:47 Don't Trust My Math
15:42 The Morse Code Red
18:39 The Moment I've Been Waiting For
23:13 Uncharted Territory
25:22 Absolutely Delicious
26:51 Do it Does the Thing?

FAQ
Drafting Equipment (affiliate links): amzn.to/3P0HvMe
A/V Equipment (affiliate links): amzn.to/3Pi45jB
Editing: Final Cut Pro X
Intro Song: Way Back Way Back When (Instrumental Version) - Gamma Skies
epidemicsound.com/track/SQxEhTVi9I/\

youtu.be/kWzMN12TnZA

© 2023 Inheritance Machining, LLC. All Rights Reserved.

Hows a Guy Supposed to Work Like This?

Inheritance Machining 2023-10-13 | Thank you to Henson Shaving for sponsoring this video! Use code INHERITANCE to get 100 free blade refills at http://hensonshaving.com/inheritance

Let’s face it. Every once in a while you have to stop creating new projects and clear some of the long standing ones off of your list. Because one can only live like an animal for so long!

ALSO a correction because I did a dumb. My grandfather was PFC (Private First Class) not PVC as I have in the video. My apologies!

#inheritancemachining #machineshop #hobbymachinist

Patreon (Early Access + Ad Free + Drawings) - patreon.com/inheritancemachining
Drawings Store - inheritancemachining.com/?product_tag=drawings
Merch: inheritance-machining.myspreadshop.com
Instagram - instagram.com/inheritancemachining
Website - inheritancemachining.com
Amazon Storefront (affiliate links): amazon.com/shop/inheritancemachining

Thank you again to the Micrometer level Patreon members listed at the end of the video!

TIMESTAMPS

0:00 Intro
0:51 What's That Hissin' Noise?
4:25 Hygienic
7:03 Dimwit
8:44 You Saw This Coming
12:22 Out With Ye!
14:14 Filling My Drawers...
17:04 ...And Shelves... And Shelves...
18:49 A BIG Deal
22:06 Remembrance

FAQ
Drafting Equipment (affiliate links): amzn.to/3P0HvMe
A/V Equipment (affiliate links): amzn.to/3Pi45jB
Editing: Final Cut Pro X
Intro Song: Way Back Way Back When (Instrumental Version) - Gamma Skies
epidemicsound.com/track/SQxEhTVi9I/\

youtu.be/gsZigIXH6xs

© 2023 Inheritance Machining, LLC. All Rights Reserved.

How An Engineer Becomes A YouTuber (Q&A)

Inheritance Machining 2023-09-15 | Thank you so much to all the patrons who asked questions! You guys had some really good ones. This Q&A was great fun, and we'll definitely be doing more in the future. And make sure you stick around to the end for some bloopers!

Thanks for watching!

#inheritancemachining #machineshop #hobbymachinist

Patreon (Early Access + Ad Free + Drawings) - patreon.com/inheritancemachining
Drawings Store - inheritancemachining.com/?product_tag=drawings
Merch: inheritance-machining.myspreadshop.com
Instagram - instagram.com/inheritancemachining
Website - inheritancemachining.com
Amazon Storefront (affiliate links): amazon.com/shop/inheritancemachining

Thank you again to the Micrometer level Patreon members listed at the end of the video!

TIMESTAMPS/QUESTIONS

0:00 Intro
0:31 Branch of Engineering
1:46 Engineer-Machinist Relationship
3:12 Moving a Shop
4:20 Grandfather's Occupation
4:56 Learning the Trade
6:36 Expanding the Shop
7:35 3D Printing and CNC
8:41 Most Enjoyment
9:03 Most Challenging
10:10 Project Do-Overs
11:16 Becoming a YouTuber
13:02 Video Process
16:23 Project Time Frame
16:59 Drafting Education
18:42 Particular Consumables
19:23 In the Earbuds
19:43 Future Projects
20:55 Silly Stuff :D

FAQ
Drafting Equipment (affiliate links): amzn.to/3P0HvMe
A/V Equipment (affiliate links): amzn.to/3Pi45jB
Editing: Final Cut Pro X
Intro Song: Way Back Way Back When (Instrumental Version) - Gamma Skies
epidemicsound.com/track/SQxEhTVi9I/\

youtu.be/dT-dlk1E0pc

© 2023 Inheritance Machining, LLC. All Rights Reserved.

These Will Save My Parts

Inheritance Machining 2023-09-01 | Most of the time I use the 4 jaw chuck on the lathe, I also use some makeshift soft jaws to protect the part finish. But my shoddily thrown together jaw covers look like an afterthought and don't necessarily give me the warm fuzzies that I like to have when using my tools. So today I’m spending way more time than necessary making something that will look a whole lot better. I guess they will work better too… but mostly they will look nicer.

#inheritancemachining #machineshop #hobbymachinist

Get the drawings for this project here: inheritancemachining.com/?product=softjaws

Patreon (Early Access + Ad Free + Drawings) - patreon.com/inheritancemachining
Drawings Store - inheritancemachining.com/?product_tag=drawings
Merch: inheritance-machining.myspreadshop.com
Instagram - instagram.com/inheritancemachining
Website - inheritancemachining.com
Amazon Storefront (affiliate links): amazon.com/shop/inheritancemachining

Thank you again to the Micrometer level Patreon members listed at the end of the video!

TIMESTAMPS

0:00 Intro
1:04 Gelatin
3:21 Square Dancing
6:26 This Part Is Boring
8:32 Consumables
11:56 Stress Concentrations Galore
13:31 Abracadabra is Matrix Algebra
15:25 Rounds?
16:50 How 'Bout Rounded Rounds?!
19:45 Lathe Lovin'
21:15 Was It Worth It?

FAQ
Drafting Equipment (affiliate links): amzn.to/3P0HvMe
A/V Equipment (affiliate links): amzn.to/3Pi45jB
Editing: Final Cut Pro X
Intro Song: Way Back Way Back When (Instrumental Version) - Gamma Skies
epidemicsound.com/track/SQxEhTVi9I/\

youtu.be/r34WUDab244

© 2023 Inheritance Machining, LLC. All Rights Reserved.

Free the Nut! (Not What You Think)

Inheritance Machining 2023-08-18 | To try everything Brilliant has to offer—free—for a full 30 days, visit brilliant.org/Inheritance/. The first 200 of you will get 20% off Brilliant's annual premium subscription.

This video was sponsored by Brilliant.

Get the drawings for this puzzle here! inheritancemachining.com/?product=captivenut

In this video I'm designing and machining a new take on the age old machinists' captive nut puzzle. The solution is not what you think!

#inheritancemachining #machineshop #hobbymachinist

Patreon (Early Access + Ad Free + Drawings) - patreon.com/inheritancemachining
Drawings Store - inheritancemachining.com/?product_tag=drawings
Merch: inheritance-machining.myspreadshop.com
Instagram - instagram.com/inheritancemachining
Website - inheritancemachining.com
Amazon Storefront (affiliate links): amazon.com/shop/inheritancemachining

Thank you again to the Micrometer level Patreon members listed at the end of the video!

TIMESTAMPS

0:00 Intro
1:01 Insomnia
2:22 Schrödinger's Cat
5:28 Back On Center
7:42 A Fine Pairing
10:13 Best for Last
11:29 Nutty
15:34 Springy
17:11 The Key to it All
18:39 Another Crack
21:48 Third Time's the Charm
22:57 How Does it Do What it Does?
24:56 A Second Opinion

FAQ
Drafting Equipment (affiliate links): amzn.to/3P0HvMe
A/V Equipment (affiliate links): amzn.to/3Pi45jB
Editing: Final Cut Pro X
Intro Song: Way Back Way Back When (Instrumental Version) - Gamma Skies
epidemicsound.com/track/SQxEhTVi9I/\

youtu.be/1B37Izw_v2M

© 2023 Inheritance Machining, LLC. All Rights Reserved.

What Happens When You Procrastinate...

Inheritance Machining 2023-07-21 | Let’s face it, it’s far too easy to push off all the little inconveniences and annoyances that crop up while working in the shop. Especially so if they get in the way of the projects we actually want to make. But sometimes those annoyances all converge on one machine. Making it... Less than enjoyable to use. This is what happened to my milling machine. It has a few small issues that I’ve been putting off for one reason or another. But now the problems have escalated to the point that I just can’t take it anymore! So today I’ll be diving into what’s wrong, fixing those issues, and making a few upgrades along the way. Enjoy!

#inheritancemachining #machineshop #hobbymachinist

Patreon (Early Access + Ad Free + Drawings) - patreon.com/inheritancemachining
Drawings Store - inheritancemachining.com/?product_tag=drawings
Merch: inheritance-machining.myspreadshop.com
Instagram - instagram.com/inheritancemachining
Website - inheritancemachining.com
Amazon Storefront (affiliate links): amazon.com/shop/inheritancemachining

Thank you again to the Micrometer level Patreon members listed at the end of the video!

SUPPLIES (affiliate links)
Drive Belt: amzn.to/3rAcp4m
VFD: amzn.to/46YNjvX
Enclosure: amzn.to/44VjACk
Cord Grips: amzn.to/44RtuVM
Power Cable: amzn.to/43wEuql
Signal Cable: amzn.to/44Veer0
Zip Tie Mounts: amzn.to/43CmQkW
Power Switch: amzn.to/43BDjpM
Cooling Fan: amzn.to/3Q2u26P
Toe Jack: amzn.to/3Q0FaRP
Threaded Rod: amzn.to/3rE6Did
Drill Bit: amzn.to/3rE6BH7
Anchoring Epoxy: amzn.to/44SP4sV

TIMESTAMPS

0:00 Intro
1:15 Rubber Evaporates?
5:42 Troubles on Re-entry
9:09 Phase 2… NO! 3!!
11:41 Cable Management
15:40 Learning Curve
19:47 Rockin’ and Rollin’
21:32 Change of Plans
23:26 It was a good run…
25:08 Killing Time
26:53 Should Have Done This Sooner

FAQ
Drafting Equipment (affiliate links): amzn.to/3P0HvMe
A/V Equipment (affiliate links): amzn.to/3Pi45jB
Editing: Final Cut Pro X
Intro Song: Way Back Way Back When (Instrumental Version) - Gamma Skies
epidemicsound.com/track/SQxEhTVi9I/\

youtu.be/lZhAD8m6eUY

© 2023 Inheritance Machining, LLC. All Rights Reserved.

I Might Have Invented Something New...

Inheritance Machining 2023-07-07 | So the rotary fixture plate is done, right? WRONG. I’ve got just one more feature to add to it. A set of material squaring guides. I have an idea for a dovetail clamp that allows for adjustability, but is also self-squaring. I’ve never seen anything quite like it which could either be a good thing or a bad thing. It’s one of those weird things where the mechanism makes sense, but at the same time… doesn’t. So let’s find out, and build a functional prototype!

#inheritancemachining #machineshop #hobbymachinist

Patreon (Early Access + Ad Free + Drawings) - patreon.com/inheritancemachining
Drawings Store - inheritancemachining.com/?product_tag=drawings
Merch: inheritance-machining.myspreadshop.com
Instagram - instagram.com/inheritancemachining
Website - inheritancemachining.com
Equipment Links (affiliate): amazon.com/shop/inheritancemachining

Thank you again to the Micrometer level Patreon members listed at the end of the video!

TIMESTAMPS

0:00 Intro
1:12 Uncertainty Principle
3:50 Start at the Bottom…
5:15 And work your way DOWN??
6:20 Putting the “A” in “A2”
8:02 Subtleties
9:57 It Was Going to Bug Me…
10:47 Who Doesn’t Like a Quickie?
12:22 The Inbetwixt
15:15 Secret Sauce
16:50 Fixtures FTW
18:52 Does It Do the Thing?
19:49 Nitpicking
20:50 The Truth of the Matter
22:57 Kinda… Sorta…

FAQ
Editing: Final Cut Pro X
Intro Song: Way Back Way Back When (Instrumental Version) - Gamma Skies
epidemicsound.com/track/SQxEhTVi9I/\

youtu.be/awkhVmcxgR0

© 2023 Inheritance Machining, LLC. All Rights Reserved.

Handles, Collars and Stops... OH MY!

Inheritance Machining 2023-06-23 | As the next installment of the design build that got way out of hand, I’m tackling the bits that make the rotary fixture plate extra satisfying. The locking collar that holds it all together. The block that makes this thing mountable in the milling machine vise. A brutally grippy handlebar and knob (seriously this thing should be regulated). And the precision bump stops that should make this rotary table ultra-repeatable. There’s brass. There’re chamfers. There’re side projects! And if that’s not enough for you (and despite my wife’s eye rolling) there are dad jokes! Ok I’m done… Enjoy!

#inheritancemachining #machineshop #hobbymachinist

Patreon (Early Access + Ad Free + Drawings) - patreon.com/inheritancemachining
Drawings Store - inheritancemachining.com/?product_tag=drawings
Merch: inheritance-machining.myspreadshop.com
Instagram - instagram.com/inheritancemachining
Website - inheritancemachining.com
Amazon Storefront (affiliate links): amazon.com/shop/inheritancemachining

Thank you again to the Micrometer level Patreon members listed at the end of the video!

TIMESTAMPS

0:00 Intro
1:20 HOLD IT TOGETHER!!!
5:02 Broken, Battered and Scarred
6:45 For the Love of Shortcuts
11:22 Brass. Is. Butter.
12:44 Hold That Thought!
14:40 Assault with a Delicious Weapon
15:50 Another Shortcut
18:02 CRANK IT UP!
20:25 A Matter of Geometry
23:07 Small Change. BIG Impact.
24:40 I'm as Shocked as You
25:49 But Does it Do the Thing!?

FAQ
Drafting Equipment (affiliate links): amzn.to/3P0HvMe
A/V Equipment (affiliate links): amzn.to/3Pi45jB
Editing: Final Cut Pro X
Intro Song: Way Back Way Back When (Instrumental Version) - Gamma Skies
epidemicsound.com/track/SQxEhTVi9I/\

youtu.be/nT-hMh9Er4M

© 2023 Inheritance Machining, LLC. All Rights Reserved.

The Radius Fixture That Got Way Too Complicated

Inheritance Machining 2023-06-09 | Machining rounds on part corners presents a dilemma (to me anyway). Either I lug out my massive rotary table then spend a significant amount of time setting it and my parts up on the mill. Or I just quickly free-hand grind them on belt sander and live with the imprecision. So I’ve decided to make a tool that is the best of both worlds. A rotating fixture plate that is fast to set up, but also precise! But of course it doesn’t stop there. Being the engineer that I am, I couldn’t resist including a ton of extra functionality. If I’m taking the time to make the tool, might as well do it right, right? At any rate, the scope of the project might have gotten a little out of hand… and I might have had to come up with some shortcuts just to save some time. I’m not saying there’s super glue involved… But I’m not saying there isn’t either.

#inheritancemachining #machineshop #hobbymachinist

Patreon (Early Access + Ad Free + Drawings) - patreon.com/inheritancemachining
Drawings Store - inheritancemachining.com/?product_tag=drawings
Merch: inheritance-machining.myspreadshop.com
Instagram - instagram.com/inheritancemachining
Website - inheritancemachining.com
Amazon Storefront (affiliate links): amazon.com/shop/inheritancemachining

Thank you again to the Micrometer level Patreon members listed at the end of the video!

TIMESTAMPS

0:00 Intro
1:10 Scope Creep is Real
2:13 Inner Peace
3:28 "CA"n you handle it?
7:04 Improvisation
9:53 Powerfeed is my Friend
12:04 Swiss Cheesen' It
14:36 Keeping It Centered
16:32 For Smoothness
17:55 Economize!
20:05 VEEry Nice
21:59 Dissimilar Materials
23:33 What's Next?

FAQ
Drafting Equipment (affiliate links): amzn.to/3P0HvMe
A/V Equipment (affiliate links): amzn.to/3Pi45jB
Editing: Final Cut Pro X
Intro Song: Way Back Way Back When (Instrumental Version) - Gamma Skies
epidemicsound.com/track/SQxEhTVi9I/\

youtu.be/z3KaY65Wqmo

© 2023 Inheritance Machining, LLC. All Rights Reserved.

The Joy of Hand Drawing Machining Prints || INHERITANCE MACHINING

Inheritance Machining 2023-05-26 | Despite my best efforts to make my next machine shop project “simple”, I just couldn’t help myself but include ALL the features. As a result this one required a bit more engineering design than usual. So I decided to make a dedicated drafting video (i.e. without computer aided design software). I’ll walk through my personal design process starting with the pencil sketch. Then roughing out the assembly drawing. And finally putting together the technical drawing (blueprint) for each part. Along the way I’ll talk about the drafting tools (drafting machine, mechanical pencil, etc), techniques (pencil rolling, line types, etc) and view styles (section view, detail view, etc) I use. Enjoy!

#inheritancemachining #machineshop #hobbymachinist

Patreon (Early Access + Ad Free + Drawings) - patreon.com/inheritancemachining
Drawings Store - inheritancemachining.com/?product_tag=drawings
Merch: inheritance-machining.myspreadshop.com
Instagram - instagram.com/inheritancemachining
Website - inheritancemachining.com

Thank you again to the Micrometer level Patreon members listed at the end of the video!

Drafting Equipment (affiliate links)
*Most of the equipment I use is out of production. Comps are listed
Table - unmarked (comp. amzn.to/3BU0wbh)
Drafting Board Cover - Vyco Cover (amzn.to/3pXzih5)
Drafting Machine - Keuffel+Esser Paragon Jr. (ebay ebay.com/sch/i.html?_from=R40&_trksid=p2380057.m570.l1313&_nkw=drafting+machine&_sacat=0)
Pencil (Lead Holder) - Staedtler 780C (amzn.to/43mKimx)
Leads (HB) - Staedtler (amzn.to/421qRi9)
Leads (2B) - Staedtler (amzn.to/45vgne0)
Leads (2H) - Staedtler (amzn.to/3MB2Etk)
Lead Pointer - Dietzgen SharPoint (comp. amzn.to/3IDIzlc)
(ebay ebay.com/sch/i.html?_from=R40&_trksid=p2334524.m570.l1313&_nkw=dietzgen+sharpoint&_sacat=0&LH_TitleDesc=0&_osacat=0&_odkw=pickett+1503+cnc)
Eraser - Staedtler (amzn.to/3q8QYqg)
Eraser Shield - unmarked (comp. amzn.to/3MVBj6K)
Compass Set - Pickett 1503 NC (comp. amzn.to/3IDaa5H)
(ebay ebay.com/sch/i.html?_from=R40&_trksid=p2047675.m570.l1313&_nkw=pickett+1503+nc&_sacat=0)
Circle Templates - RapiDesign (inch amzn.to/3MxUfH5)
(metric amzn.to/3owUl9S)
Ellipse Templates - RapiDesign (inch amzn.to/3N46tJf)
(metric amzn.to/3BSZkov)
45 Triangle - Pickett 45 PT6 (comp. amzn.to/3ICMSgq)
30/60 Triangle - Pickett 30 PT6 (comp. amzn.to/3IEx3FV)
Brush - Alvin (amzn.to/43l9iL4)
Drafting Dots - Pacific Arc (amzn.to/43picXX)

TIMESTAMPS

0:00 Intro
1:11 An Idea
1:45 Doodly
2:48 The Computer
4:58 Roughin’ It
6:05 It’s a Setup!
8:17 Cheater
10:03 What Pencils are For
11:44 Heathenistic Tendencies
13:13 Projecting Much?
14:58 dimlin
16:50 Numbers!
18:26 Inspector Brandon
19:25 Jumping the Shark
20:34 Rinse and Repeat

FAQ
Camera: Canon 90D camera with Rode Videomic Pro+ with wind shield
Voiceover: Heil Sound "The FIN" mic with a pop filter and a Focusrite Scarlett 2i2 preamp.
Editing: Final Cut Pro X
Intro Song: Way Back Way Back When (Instrumental Version) - Gamma Skies
epidemicsound.com/track/SQxEhTVi9I/\

youtu.be/YtchhV7aV7Q

© 2023 Inheritance Machining, LLC. All Rights Reserved.

Some STYLISH Hold Down Clamps || INHERITANCE MACHINING

Inheritance Machining 2023-05-12 | A while back I spent the better part of a week in the machine shop making a universal fixture plate. It was something I thought would see a lot of use. But since finishing it, it hasn’t left its home in the cabinet. Not even once! But I think I know why… for a fixture plate to be useful one needs a variety of clamping tools to hold material to it. And as it stands, I only have one style of clamp ready to go. So that’s my challenge this week. To make a set of hold down clamps. While I’m at it, I might as well add some unique features to make them a bit more useful. And of course I can’t resist the urge to make them a bit stylish!

#inheritancemachining #machineshop #hobbymachinist

Drawings for the hold down clamps: inheritancemachining.com/?product=hold-down-clamps

Patreon (Early Access + Ad Free + Drawings) - patreon.com/inheritancemachining
Drawings Store - inheritancemachining.com/?product_tag=drawings
Merch: inheritance-machining.myspreadshop.com
Instagram - instagram.com/inheritancemachining
Website - inheritancemachining.com
Drafting Equipment (affiliate links): amzn.to/3P0HvMe

Thank you again to the Micrometer level Patreon members listed at the end of the video!

TIMESTAMPS

0:00 Intro
1:12 Here's What I'm Thinking
3:35 You Can Run, But You Can't Hide
5:45 Ain't Nobody Got Time For That
7:38 Brass Tacks
9:03 Dripping in Irony
12:12 Proper Footing
13:11 The Big'ns
14:18 A Tool for Every Job
16:06 The Little'ns
18:29 A Useful Fixture
20:08 MOAR FANCY
21:48 Parting Thoughts

FAQ
Amazon Storefront (affiliate links): amazon.com/shop/inheritancemachining
A/V Equipment (affiliate links): amzn.to/3Pi45jB
Editing: Final Cut Pro X
Intro Song: Way Back Way Back When (Instrumental Version) - Gamma Skies
epidemicsound.com/track/SQxEhTVi9I/\

youtu.be/0oJDy3OVxu8

© 2023 Inheritance Machining, LLC. All Rights Reserved.

A FANCY Lathe Tool Height Gauge || INHERITANCE MACHINING

Inheritance Machining 2023-04-14 | Being an engineer I have a knack for finding problems where they don’t exist, and coming up with over-designed solutions. Combine that with being a wanna-be toolmaker and things can get out of hand real fast. But in the case of this project I think I may have stumbled upon something actually useful! On a metal lathe there are a few tricks of the trade for setting the cutting tool heights. Like referencing a tailstock center, or the centerpoint of a faced piece of material. But these aren’t exactly precise methods. A common (and extremely simple) approach to this problem is to machine a reference bar whose length is the exact distance between the spindle centerline and the way surface. Then setting this on the ways near the cutting tool to set the height. While all of these work just fine as far as resulting in a good finish, I still see room for something a little more elegant. So in this video I’ll be putting together a lathe tool that I’m not sure exists. And maybe for good reason!

#inheritancemachining #machineshop #hobbymachinist

Patreon (Early Access + Ad Free + Drawings) - patreon.com/inheritancemachining
Drawings Store - inheritancemachining.com/?product_tag=drawings
Merch: inheritance-machining.myspreadshop.com
Instagram - instagram.com/inheritancemachining
Website - inheritancemachining.com
Amazon Storefront (affiliate links): amazon.com/shop/inheritancemachining

Thank you again to the Micrometer level Patreon members listed at the end of the video!

TIMESTAMPS

0:00 You See, The Problem Is...
2:04 Where the Pencil Meets... the Paper
4:37 Grandfather Was Right
7:44 Boyle's Law
10:19 Lack of Foresight
12:07 Milling Mojo
13:27 If it Ain't Broke
14:49 Highly Eccentric
17:43 Slightly Less Eccentric
19:50 Does it Do the Thing?

FAQ
Drafting Equipment (affiliate links): amzn.to/3P0HvMe
A/V Equipment (affiliate links): amzn.to/3Pi45jB
Editing: Final Cut Pro X
Intro Song: Way Back Way Back When (Instrumental Version) - Gamma Skies
epidemicsound.com/track/SQxEhTVi9I/\

youtu.be/fWYzpK34KD4

© 2023 Inheritance Machining, LLC. All Rights Reserved.

Resurrecting the Phoenix Clock || INHERITANCE MACHINING

Inheritance Machining 2023-03-31 | Growing up with my grandparents I was always intrigued by the mysterious wooden clock in their attic. It was in pieces so I wasn’t sure exactly what it looked like but I could tell it was an open design skeleton clock where you could see the gears and escapement. So naturally my gearhead self was fascinated. The legend behind the clock was that it was bought as a clock kit for my great-grandfather in the ‘80s. He was able to get it all together, but he passed away before he could get it fully running. So for 30 years it sat in that attic. It wasn’t until 3 years ago that I could try my hand at it, but being neither a clockmaker or horologist, I didn’t have much luck getting it to move longer than a couple minutes. But today I aim to change that!

#inheritancemachining #machineshop #hobbymachinist

Patreon (Early Access + Ad Free + Drawings) - patreon.com/inheritancemachining
Drawings Store - inheritancemachining.com/?product_tag=drawings
Merch: inheritance-machining.myspreadshop.com
Instagram - instagram.com/inheritancemachining
Website - inheritancemachining.com
Amazon Storefront (affiliate links): amazon.com/shop/inheritancemachining

Thank you again to the Micrometer level Patreon members listed at the end of the video!

TIMESTAMPS

0:00 Intro
1:31 Nearly Lost Forever
3:13 I’m No Horologist
5:46 Well That was Easy
8:13 The Great Escape(ment)
12:09 Test Cuts Prohibited
13:49 No “Turning” Back
15:27 That’s Not Wood...
17:04 A Lack of Planning
19:29 Gettin' Lucky
20:47 Fine Tuning
23:50 A New Record!

FAQ
Drafting Equipment (affiliate links): amzn.to/3P0HvMe
A/V Equipment (affiliate links): amzn.to/3Pi45jB
Editing: Final Cut Pro X
Intro Song: Way Back Way Back When (Instrumental Version) - Gamma Skies
epidemicsound.com/track/SQxEhTVi9I/\

youtu.be/_2ZY1l8Iz0A

© 2023 Inheritance Machining, LLC. All Rights Reserved.

Some UPGRADES for the Lathe || INHERITANCE MACHINING

Inheritance Machining 2023-03-17 | Over the past year I’ve taken on many machining and engineering projects so I’ve definitely spent a lot of time with these machine tools; becoming familiar with both their capabilities and their limitations. In this video I’ll be tackling some of the latter. Specifically on the metal lathe. I have a whole list of improvements I’d like to make so I’ll just be starting with the things that bug me the most and going from there. And as always I’ll be taking the “do it yourself” approach to all these upgrades, from engineering design to precision machining. Enjoy!

#inheritancemachining #machineshop #hobbymachinist

Patreon (Early Access + Ad Free + Drawings) - patreon.com/inheritancemachining
Drawings Store - inheritancemachining.com/?product_tag=drawings
Merch: inheritance-machining.myspreadshop.com
Instagram - instagram.com/inheritancemachining
Website - inheritancemachining.com
Amazon Storefront (affiliate links): amazon.com/shop/inheritancemachining

Thank you again to the Micrometer level Patreon members listed at the end of the video!

TIMESTAMPS

0:00 Intro
1:14 Upgrade Schmupgrade
3:05 Cocky Is as Cocky Does
4:27 Salvageable
7:18 When Problems Compound
8:39 AutoPAD 2.0
9:54 When the Back Burner Strikes Back
12:11 Now Where Was I?
14:53 Dun' Goofed
16:05 And Screwed
18:11 Carried Away
19:55 One Last Thing... I Swear!

FAQ
Drafting Equipment (affiliate links): amzn.to/3P0HvMe
A/V Equipment (affiliate links): amzn.to/3Pi45jB
Editing: Final Cut Pro X
Intro Song: Way Back Way Back When (Instrumental Version) - Gamma Skies
epidemicsound.com/track/SQxEhTVi9I/\

youtu.be/u2IS_FZiby0

© 2023 Inheritance Machining, LLC. All Rights Reserved.

Making the PERFECT* Slitting Saw Arbor || INHERITANCE MACHINING

Inheritance Machining 2023-03-03 | If you want something done right, sometimes you have to do it yourself. In this project I’ll be engineering and machining an improved slitting saw arbor to replace the bargain barrel piece of junk I bought a while back. Which should be a pretty simple project honestly… but of course I’m incapable of keeping things simple. I’ll include a standard R8 taper making it compatible with my mill’s spindle. But the other end will be a little more interesting. It’s designed such that it can adapter to a wide range of slitting saw blades with different sized holes. Do I have blades with different sized holes? No… but I might one day. Anyway, this does present somewhat of a challenge to keep several assembled parts as concentric as possible. So some precision machining is in order. Including some turning on the mill, as well as my first foray into trepanning. Like I said… I’m incapable of keeping things simple.

Get the drawings for this project here: inheritancemachining.com/?product=slittingsawarbor

#inheritancemachining #machineshop #hobbymachinist

Drawings Store - inheritancemachining.com/?product_tag=drawings
Patreon (Early Access + Ad Free + Drawings) - patreon.com/inheritancemachining
Instagram - instagram.com/inheritancemachining
Website - inheritancemachining.com
Merch: inheritance-machining.myspreadshop.com
Amazon Storefront (affiliate links): amazon.com/shop/inheritancemachining

Thank you again to the Micrometer level Patreon members listed at the end of the video!

TIMESTAMPS

0:00 Buy Cheap, Buy Twice
2:47 Or Design Your Own
4:27 Not STRAIGHTforward
6:38 "R8" My Play on Words
8:46 By the Mill, For the Mill
10:06 Lathe 2.0
13:25 Watch Your Step
15:37 Trepuhning? TREEpanning? TrePANning!
18:14 Where There's One, There's Many
19:35 The Eentsy Weentsy Centering Boss Retaining Pin
20:23 Is it Actually Better?

FAQ
Drafting Equipment (affiliate links): amzn.to/3P0HvMe
A/V Equipment (affiliate links): amzn.to/3Pi45jB
Editing: Final Cut Pro X
Intro Song: Way Back Way Back When (Instrumental Version) - Gamma Skies
epidemicsound.com/track/SQxEhTVi9I/\

youtu.be/UPZD7EgNDlQ

© 2023 Inheritance Machining, LLC. All Rights Reserved.

My best invention no one will ever see

Inheritance Machining 2023-02-17 | Welcome back to the machine shop! For over a year I’ve suffered through using a camera tripod to film all of these videos, and I’ve finally reached my breaking point. So for this build I’m making an articulating arm for mounting my DSLR camera. And better yet, I’m suspending it from a ceiling gantry that spans my entire shop. The balance arm will be similar to those used with desk lamps, only much larger and much more robust. And the arm will be mounted to a 2 axis gantry system made up of unistrut channel and unistrut trolleys. This is a perfect little engineering and machining project that not only results in something cool, but is a serious improvement to day to day life!

#inheritancemachining #machineshop #hobbymachinist

Patreon (Early Access + Ad Free + Drawings) - patreon.com/inheritancemachining
Drawings Store - inheritancemachining.com/?product_tag=drawings
Instagram - instagram.com/inheritancemachining
Website - inheritancemachining.com
Amazon Storefront (affiliate links): amazon.com/shop/inheritancemachining

Thank you again to the Micrometer level Patreon members listed at the end of the video!

TIMESTAMPS

0:00 Intro
1:19 A Design, You Say?
2:57 Gettin' Grippy
6:37 Tell it to the Boss
7:18 Sketch Filming
8:41 Davy Jones Locker
11:41 Inspired by CEE
12:47 Stacks on Stacks
14:52 When Form Meets Function
15:36 Tubular, Dude
17:43 Insurance Policy
20:02 Wood?!
23:18 Does It Do the Thing?

FAQ
Drafting Equipment (affiliate links): amzn.to/3P0HvMe
A/V Equipment (affiliate links): amzn.to/3Pi45jB
Editing: Final Cut Pro X
Intro Song: Way Back Way Back When (Instrumental Version) - Gamma Skies
epidemicsound.com/track/SQxEhTVi9I/\

youtu.be/t1sXvMY_vAw

© 2023 Inheritance Machining, LLC. All Rights Reserved.

Making a UNIVERSAL Tap Follower || INHERITANCE MACHINING

Inheritance Machining 2023-02-03 | Welcome back to my manual machine shop. In this build I’ll be making a spring loaded universal tap follower. This is a super useful tapping guide that keeps your tap and tap wrench straight when thread tapping. I’ll start at the drafting table putting together a detailed pencil drawing of the parts. And while it’s not nearly as over engineered of a design as I normally do, there are some features that were far more challenging than I anticipated. And the box of shame claims several victims… Despite that I got to spend some quality time at the metal lathe, my favorite machine. And after several videos without one, had an excuse to knock out a good side project.

Get the drawings for this project here: inheritancemachining.com/?product=tapfollower

#inheritancemachining #machineshop #hobbymachinist

Patreon (Early Access + Ad Free + Drawings) - patreon.com/inheritancemachining
Drawings Store - inheritancemachining.com/?product_tag=drawings
Instagram - instagram.com/inheritancemachining
Website - inheritancemachining.com
Amazon Storefront (affiliate links): amazon.com/shop/inheritancemachining

Thank you again to the Micrometer level Patreon members listed at the end of the video!

TIMESTAMPS

0:00 Intro
0:51 Design
3:54 Getting it All Straight
5:42 To Cut a Taper?
7:27 Drilling... Reimagined!
9:18 In the Clear
10:58 An Unsettling Discovery
13:05 The Boring Way is the Best Way
15:34 Moment of Truth
16:17 The Knurly Bit
18:11 Was it Worth It?

FAQ
Drafting Equipment (affiliate links): amzn.to/3P0HvMe
A/V Equipment (affiliate links): amzn.to/3Pi45jB
Editing: Final Cut Pro X
Intro Song: Way Back Way Back When (Instrumental Version) - Gamma Skies
epidemicsound.com/track/SQxEhTVi9I/\

youtu.be/gmzTG4RS4vI

© 2023 Inheritance Machining, LLC. All Rights Reserved.

Making the KING of All Knurling Tools (Finale) || INHERITANCE MACHINING

Inheritance Machining 2023-01-20 | Welcome back to my manual machine shop for the finale of the knurling tool build. I’m building this mechanical project from the somewhat famous Hemingway Kit (not sponsored) that is modeled after the old “Marlco” design. While last time there was a lot of mill work on the rotary table, this time there is still a lot of mill work, but with the collet block instead. Plus lots of quality time on the metal lathe. And maybe a visit or two to the box of shame. In other words, a well rounded project. In the end I make it through with a nice replica of a vintage tool capable of making both straight knurls and diamond knurls.

#inheritancemachining #machineshop #hobbymachinist

Knurling Kit (unaffiliated)- hemingwaykits.com/HK1115

Knurling Calculator - machiningdoctor.com/calculators/knurling

Patreon (Drawings) - patreon.com/inheritancemachining
Drawings Store - inheritancemachining.com/?product_tag=drawings
Instagram - instagram.com/inheritancemachining
Website - inheritancemachining.com
Amazon Storefront (affiliate links): amazon.com/shop/inheritancemachining

Thank you again to the Micrometer level Patreon members listed at the end of the video!

TIMESTAMPS

0:00 Intro
1:24 Run of the Mill
3:59 One False Move
6:05 Overlooking The Obvious...
8:37 ...Twice
9:58 A Good Night's Rest
10:18 Is it Nutty?
11:33 Or Screwy?
14:09 Nuances
15:30 Picking up the Pieces
16:20 Does Work Though?
18:34 Try That Again
19:52 Knurling... A Love Story

FAQ
Drafting Equipment (affiliate links): amzn.to/3P0HvMe
A/V Equipment (affiliate links): amzn.to/3Pi45jB
Editing: Final Cut Pro X
Intro Song: Way Back Way Back When (Instrumental Version) - Gamma Skies
epidemicsound.com/track/SQxEhTVi9I/\

youtu.be/yY5m6HR9m4g

© 2023 Inheritance Machining, LLC. All Rights Reserved.

Making the KING of All Knurling Tools (Part 1) || INHERITANCE MACHINING

Inheritance Machining 2023-01-06 | Welcome back to my manual machine shop. In this video series I’ll be making a much improved knurling tool from my current bump knurler setup. Rather than engineer this one from scratch I’m starting with the sensitive knurling tool kit from Hemingway Kits (not sponsored). The kit is based on the somewhat renowned vintage “Marlco” design and has a lot of advantages and nice features. This first video will focus on the arm assembly and I’ll be making heavy use of the mill and the rotary table. And of course a fair bit of lathe work with some unique setups will be needed as well so you know I’m excited for that!

#inheritancemachining #machineshop #hobbymachinist

Knurling Kit (unaffiliated)- hemingwaykits.com/HK1115

Patreon (Drawings) - patreon.com/inheritancemachining
Instagram - instagram.com/inheritancemachining
Drawings Store - inheritancemachining.com/?product_tag=drawings
Website - inheritancemachining.com
Amazon Storefront (affiliate links): amazon.com/shop/inheritancemachining

And a special thanks to my "Micrometer" patrons!
Frank Bartling, Voltser, Will Lindberg, Joe, Paul Sullivan, Ruben Urquiza, Jonathan Knoll, Madeline, duane mihlader, Patrick King, Donald, Abbas Ali, john, westley hill, Shawn Rabideau, Bill Chowanec, Pat Bourns, Alan Schabelski, Wardo, Greggory Rothmeier, Rowdy speaks, Eduardo Zarinana, Travis Trzecinski, Trevor Flowers, Austin Lippert, Michael Taylor, Jon Morgan, stevan, Robert Alexander Devennie, John Lillig, Tristan Swanson, Eli T, Joshua Noxon, finn foley, brayden, Jiří Kresan, OttoTheDoggo, Ralph Marshall, Benjamin Limmer, John Justice, Tom Paccioretti, Trevor Massetti, Pierce Heronemus, ZommBoyy69, Justin Schmidt, Parker Schuster, Cyrus Kofroth, owen, Jacob Wiertsema, Keaton, Daniel Nelson, Valodon lol, Patttto, Dalton Smithey, Paul Virdone, Yannick Gürtler, Tanner Trachsel, Robert Cimba, John Peyton Gavin, sebastian steigerwald, Joseph Driemeyer, Flick Freaks, Philip, August, Niels Ravnsborg, Warren W. Woody, Jeffrey Spoor, Domenic Bucceri, Droth, alan ruth, jack walker, Johnny LeMaster, Sri Ram Neravati, Dan Strittmatter, Noel Felix, Tyrese, Darrin Stampe, Aaron Bryant, Russell Brantley, Nathaniel Smith, Martin Jensen, Michael Bender, eric phillips, J.N.Alleman, Joseph Garcia, Travis Wolfe, Mr R, Steptimus Heap, Connor Hughes, Nils Wagenhals, Lul, Stefan Rohner, Eric Robarge, Drokles21, Jack Champion, Samppa Turunen, Cory Forrester, Dylan Roland, Blake Foley, mike kruzan, Troy Chappell, Dakota J, Jason Copland, Zac gougeon, Joshua Chambers, Martin Pittams, Jolly_Torch, Tim, Gabe Becker, Justin Gabrielson, Steven Bierlink, David Rahn, Dennis Ray, Sebastian Wridt, James York, John Thomas, Bobby Perkins, Kyle Wellman, Wayne Dorman, Benj King, Gary Bergin, aaron freeman, Marc B, Dave, Zane Alami, Kyle Brown, Nic Vulcano, Arjaan Martini, Aiden, cameron bell, Greg Eppy, Justin Jensen, Lucas, Unknown, Merik Karman, ryker321, GrimmSaber7619, AC Machining & Engineering, Giannis65, Fred Townroe, danny crawford, Graham Poole, Jeffrey Blodgett, Francisco Peebles, Infinite Craftsman, Jason Seydel, Saikho, EAPOL M3, Eddie SpaceMonkey, Mitch Stilborn, Nicolas Brouse, Matt Mansfield, Collin Danaher, Amelia Meyer, Anthony M, mark petovic, Gmoney Official, Wes, Jack Fountain, Squall, Jarrett, Ethan Vance, Ivan Sehlin, Doug Craig, Reuben, Caleb Butterfield, neal richard, Conner Bean, Adam Knowles, Saul Cervantes, Bruce Lindley, Erik D. Radzius, Clark Schaefer, Zachary Clark, Matthew Vaerewyck, Topher Caouette, Erik Conner, Nevin Spoljaric, Robert Brown, David W, Noah Rowe, Michael P Andersen, Wesley Tullos, Karam Arnaout, Patrick Kennedy, Max, Sandra Carroll, Laz A, Philip Zielinski, ???, lollimewire nineteeneleven, Toon Akkermans, James, Noah, MICHAEL GOSS, Brennan McNickle, Jim Anderson, Grant Fenske, Caleb Thompson, Stephen Maus, Samuel Gable, Ralph McCoy, Ethan Blankenship, Chris Williams, Matthew Kosmoski, Terence Kersey, Charles L Popple, Michael Timms, Jose Rodriguez, Jim Hinze,

TIMESTAMPS

0:00 Intro
1:39 What it Is
2:38 Warming Up
5:29 Piece of Cake
7:42 Something Harder
9:24 Arms - A New Tool
12:32 Arms - The Drill Chuck Strikes Back
13:44 Arms - Return of the Slit Saw
14:51 On Pins and... Bushes?
16:06 A Bit Eccentric
17:58 Children Will Play
19:09 Setup is Everything
21:24 Wrap-up

FAQ
Drafting Equipment (affiliate links): amzn.to/3P0HvMe
A/V Equipment (affiliate links): amzn.to/3Pi45jB
Editing: Final Cut Pro X
Intro Song: Way Back Way Back When (Instrumental Version) - Gamma Skies
epidemicsound.com/track/SQxEhTVi9I/\

youtu.be/bWsGZ8XFxog

© 2023 Inheritance Machining, LLC. All Rights Reserved.

Making Spindles for a RACE CAR! || INHERITANCE MACHINING

Inheritance Machining 2022-12-23 | If you’d like to sponsor or donate to the Formula Kentucky racing team check out
https://sae.engr.uky.edu/sponsorship

For other forms of donation/sponsorship (parts, materials, tools, machining, etc) email the team directly at formulakentucky@gmail.com

This week in the manual machine shop I’m helping out some old friends. When I was at the University of Kentucky, I was on the Formula SAE (Formula Student) team where we designed, built and raced with a Formula 1 style race car. The main competition we attended was at the MIchigan International Speedway, and included many performance based aspects like an autocross style endurance race. As well as engineering design and cost evaluations. Just as was the case when I was on the team, the new team was looking for help in whatever form possible. So I’m lending my machine tools and the little knowledge I’ve built up to help make the front wheel spindles. They are made from 6061 aluminum and connect the wheels and brake rotors to the car through tapered roller bearings. There is a lot of machining involved in these but I’m especially excited for all the glorious lathe work. Already I can see a few side projects creeping up. Enjoy!

#inheritancemachining #machineshop #hobbymachinist

Patreon (Drawings) - patreon.com/inheritancemachining
Instagram - instagram.com/inheritancemachining
Drawings Store - inheritancemachining.com/?product_tag=drawings
Website - inheritancemachining.com
Amazon Storefront (affiliate links): amazon.com/shop/inheritancemachining

Micrometer patrons!
Joshua Noxon, finn foley, brayden, Jiří Kresan, OttoTheDoggo, Ralph Marshall, Benjamin Limmer, John Justice, Tom Paccioretti, Trevor Massetti, Pierce Heronemus, ZommBoyy69, Justin Schmidt, Parker Schuster, Cyrus Kofroth, owen, Jacob Wiertsema, Keaton, Daniel Nelson, Valodon lol, Patttto, Dalton Smithey, Paul Virdone, Yannick Gürtler, Tanner Trachsel, Robert Cimba, John Peyton Gavin, sebastian steigerwald, Joseph Driemeyer, Flick Freaks, Philip, August, Niels Ravnsborg, Warren W. Woody, Jeffrey Spoor, Domenic Bucceri, Droth, alan ruth, jack walker, Johnny LeMaster, Sri Ram Neravati, Dan Strittmatter, Noel Felix, Tyrese, Darrin Stampe, Benjamin Jäger, adriel alicea, Aaron Bryant, Russell Brantley, Nathaniel Smith, Ethyriel, Martin Jensen, James Davidson, Michael Bender, Shalor McKee, Erik s, eric phillips, Frank B. MsClain, J.N.Alleman, Joseph Garcia, Travis Wolfe, Etienne Huck, Mr R, Steptimus Heap, Connor Hughes, Nils Wagenhals, Lul, Stefan Rohner, Andre Romelle Young, Kollin Knack, Eric Robarge, sebastien frappier, Sam Kelley, Ean Hutcheson, Sami Beaumont, Ethan Cogdill, Kevin Sexton, Drokles21, Jack Champion, Brett, Samppa Turunen, Cory Forrester, Dylan Roland, Blake Foley, mike kruzan, Troy Chappell, Dakota J, Jason Copland, Zac gougeon, Joshua Chambers, Martin Pittams, Jolly_Torch, Tim, Gabe Becker, Justin Gabrielson, Steven Bierlink, David Rahn, Dennis Ray, Sebastian Wridt, James York, John Thomas, Bobby Perkins, Kyle Wellman, Wayne Dorman, Benj King, Gary Bergin, aaron freeman, Marc B, Dave, Zane Alami, Kyle Brown, Nic Vulcano, Arjaan Martini, Aiden, cameron bell, Greg Eppy, Justin Jensen, Lucas, Unknown, Merik Karman, ryker321, GrimmSaber7619, AC Machining & Engineering, drowe1974, Giannis65, Tusai András, Fred Townroe, danny crawford, Graham Poole, Jeffrey Blodgett, Francisco Peebles, Matt.E, Infinite Craftsman, Jason Seydel, Saikho, EAPOL M3, Eddie SpaceMonkey, Mitch Stilborn, Nicolas Brouse, Matt Mansfield, Collin Danaher, Amelia Meyer, Anthony M, mark petovic, Mo SoDak, Gmoney Official, Ben Fisher, Wes, Jack Fountain, Squall, Jarrett, Ethan Vance, Ivan Sehlin, Doug Craig, Reuben, Caleb Butterfield, neal richard, Conner Bean, Adam Knowles, Saul Cervantes, Bruce Lindley, Erik D. Radzius, Clark Schaefer, Zachary Clark, Matthew Vaerewyck, Topher Caouette, Erik Conner, Nevin Spoljaric, Robert Brown, David W, Noah Rowe, Michael P Andersen, Wesley Tullos, Karam Arnaout, Patrick Kennedy, Max, Sandra Carroll, Laz A, Philip Zielinski, ???, Kevers (Adventures'N Moore), lollimewire nineteeneleven, Toon Akkermans, James, Noah, MICHAEL GOSS, Brennan McNickle, Jim Anderson, Benjamin Dubriske, Grant Fenske, Caleb Thompson, Stephen Maus, Samuel Gable, Ralph McCoy, Ethan Blankenship, Chris Williams, Matthew Kosmoski, Terence Kersey, Charles L Popple, Michael Timms, Jose Rodriguez, Jim Hinze

TIMESTAMPS

0:00 Intro
1:32 No Drafting Required
3:06 From the Inside Out
5:27 The Precise Bits
8:04 My Ears are Ringing
11:52 Improvisation
14:50 Where the Wheel Goes
16:30 Side What?
20:28 Hindsight is 20/20

FAQ
Drafting Equipment (affiliate links): amzn.to/3P0HvMe
A/V Equipment (affiliate links): amzn.to/3Pi45jB
Editing: Final Cut Pro X
Intro Song: Way Back Way Back When (Instrumental Version) - Gamma Skies
epidemicsound.com/track/SQxEhTVi9I/\

youtu.be/sG14491vjDs

© 2022 Inheritance Machining, LLC. All Rights Reserved.

Making a VERSATILE Mini Pallet || INHERITANCE MACHINING

Inheritance Machining 2022-12-09 | Hello everyone and welcome back to my manual machine shop! In this video I’ll be engineering and machining a mini pallet system for my vertical milling machine. This is sometimes also referred to as a universal fixture plate and is essentially a slab of metal with a whole bunch of holes in it. The holes are either reamed for a clearance fit with hardened and ground locating pins. Or threaded for use with various clamping elements. For my build I’ll be making a set of Mitee Bite style eccentric edge clamps made from brass as well as some slotted positioning bars (well… nevermind, you’ll see). Other than the main plate of the pallet, I’ll also make a clamping plate for mounting in the vise, as well as a pivoting bar that will allow me to set the fixture at an angle.The large parts are made from either 2124 or 6061 aluminum and with the large plates I get the chance to really test out my massive fly cutter which is always a joy.

#inheritancemachining #machineshop #hobbymachinist

Patreon (Drawings) - patreon.com/inheritancemachining
Instagram - instagram.com/inheritancemachining
Drawings Store - inheritancemachining.com/?product_tag=drawings
Website - inheritancemachining.com
Amazon Storefront (affiliate links): amazon.com/shop/inheritancemachining

And a special thanks to my "Micrometer" patrons!
Philip, August, Niels Ravnsborg, Warren W. Woody, Jeffrey Spoor, Domenic Bucceri, Droth, alan ruth, jack walker, Johnny LeMaster, Sri Ram Neravati, Dan Strittmatter, Noel Felix, Tyrese, Darrin Stampe, Benjamin Jäger, adriel alicea, Aaron Bryant, Russell Brantley, Nathaniel Smith, Ethyriel, Martin Jensen, James Davidson, Michael Bender, Shalor McKee, Erik s, eric phillips, Frank B. MsClain, J.N.Alleman, Joseph Garcia, Travis Wolfe, Etienne Huck, Mr R, Steptimus Heap, Connor Hughes, Nils Wagenhals, Lul, Stefan Rohner, Andre Romelle Young, Kollin Knack, Eric Robarge, sebastien frappier, Sam Kelley, Ean Hutcheson, Sami Beaumont, Ethan Cogdill, Kevin Sexton, Drokles21, Jack Champion, Brett, retrosnake boi, Samppa Turunen, Cory Forrester, simon Steffen, Dylan Roland, Abigail Francis, Blake Foley, Jac Robinson, mike kruzan, Troy Chappell, Dakota J, Jason Copland, Zac gougeon, Karol Sapiołko, Joshua Chambers, Martin Pittams, Jolly_Torch, Tim, Gabe Becker, Justin Gabrielson, Dominic Reinbacher, Steven Bierlink, David Rahn, Dennis Ray, Sebastian Wridt, James York, John Thomas, Bobby Perkins, Felix Lösle, Kyle Wellman, Chrisi, mason, Wayne Dorman, Benj King, Gary Bergin, aaron freeman, Marc B, Dave, Zane Alami, Kyle Brown, Nic Vulcano, Arjaan Martini, Aiden, cameron bell, Greg Eppy, Justin Jensen, Lucas, Unknown, Merik Karman, ryker321, GrimmSaber7619, AC Machining & Engineering, drowe1974, Giannis65, Tusai András, Fred Townroe, danny crawford, Graham Poole, Jeffrey Blodgett, Francisco Peebles, Matt.E, Infinite Craftsman, Jason Seydel, Saikho, EAPOL M3, Eddie SpaceMonkey, Mitch Stilborn, Nicolas Brouse, Matt Mansfield, Collin Danaher, Amelia Meyer, Anthony M, mark petovic, Mo SoDak, Gmoney Official, Ben Fisher, Wes, Jack Fountain, Squall, Jarrett, Googleminer, Dylan Scheirbeck, Ethan Vance, Ivan Sehlin, Doug Craig, Reuben, Caleb Butterfield, neal richard, Conner Bean, Ludvig Eriksson, Adam Knowles, Saul Cervantes, Bruce Lindley, Erik D. Radzius, Kilian Dauda-Board, Clark Schaefer, Zachary Clark, Matthew Vaerewyck, Topher Caouette, Erik Conner, Nevin Spoljaric, Robert Brown, David W, Noah Rowe, Michael P Andersen, Wesley Tullos, Karam Arnaout, Patrick Kennedy, Max, Sandra Carroll, Laz A, ???, Kevers (Adventures'N Moore), lollimewire nineteeneleven, Toon Akkermans, James, Noah, MICHAEL GOSS, Brennan McNickle, Jim Anderson, Benjamin Dubriske, Grant Fenske, Caleb Thompson, Stephen Maus, Samuel Gable, Ralph McCoy, Ethan Blankenship, Chris Williams, Matthew Kosmoski, Terence Kersey, Charles L Popple, Michael Timms, Jose Rodriguez, Jim Hinze,

TIMESTAMPS

0:00 Intro
1:00 Using the Old Noggin
3:00 Square Footing
5:39 Makin' Mirrors
7:44 Do You Have The Guts?
9:36 Apparently Not
11:09 In the Meantime
13:16 What's a Mathe?
15:09 Completely Avoidable Yet Unavoidable
15:57 That's about Enough of That
17:14 A Closer Look
19:20 A Smattering of Loose Ends
21:54 A Special Project

FAQ
Drafting Equipment (affiliate links): amzn.to/3P0HvMe
A/V Equipment (affiliate links): amzn.to/3Pi45jB
Editing: Final Cut Pro X
Intro Song: Way Back Way Back When (Instrumental Version) - Gamma Skies
epidemicsound.com/track/SQxEhTVi9I/\

youtu.be/y8NgrolRIa0

© 2022 Inheritance Machining, LLC. All Rights Reserved.