Uploaded November 2020 | Updated September 2026, 2 weeks ago

---

In this video I'll be aligning the X and Z axis of the Logitech Extreme 3D Pro joystick. The alignment of those where off due to regular usage of the joystick.

Please let me know what you think of the Linux video series I'm planning to do!

Chapters:
00:00 Problem overview
02:25 Linux project idea
03:00 New lightning and camera setup

04:08 Taking apart the joystick
06:15 Examining the electronics
07:16 Taking apart the handle

08:50 Removing top cover
09:20 X-axis potmeter
09:40 Removing the base
11:15 Fixing the wobbly potmeter
12:06 Putting everything back together
13:35 Fixing the Y-axis potmeter
14:10 Putting the topcover back on
14:40 Fixing the Z-axis potmeter
15:45 Fitting the joystick handles back together
16:45 Calibration

17:45 Comment below on the Linux project!


Thanks for watching my video!

Want to contribute to my channel?

You can buy various electronics components using these links:
FeelElec FY6900 (20MHz to 60MHz): https://s.click.aliexpress.com/e/_d8uetg0

ESP-01S: https://s.click.aliexpress.com/e/_BfirlPh2
NodeMCU V3: https://s.click.aliexpress.com/e/_dXIVjLI
RobotDyn AC dimmer: https://s.click.aliexpress.com/e/_d8YAlGg
220V AC to 3.3V DC converter HLK-PM03: https://s.click.aliexpress.com/e/_dUHCfJW
VS1838B IR receiver: https://s.click.aliexpress.com/e/_dWGz9eG
Prototyping boards (various sizes): https://s.click.aliexpress.com/e/_d8ZxGAs
Dupont jumper cables (all variants): https://s.click.aliexpress.com/e/_dVyzHN2
(Tip!) Blitzwolf micro usb (+ USB C adapter): https://s.click.aliexpress.com/e/_d65Y0dQ
(Tip!) 115 in 1 scredriver set: https://s.click.aliexpress.com/e/_d8RBPy8

Please checkout my Patreon page! patreon.com/timselectronicslab

You can also find me on Instagram:
instagram.com/timselectronicslab

If you still need to create a Banggood account, please use my referral link:
banggood.app.link/AYJB8cq4X8

Please use this link if you are planning to purchase something:
banggood.com/index.php?zf=6303154