#SpeedBoatRace Challenge - Lets End 2020 with a Bang Annex Engineering 2020-12-19 | to join the speedboat race, please see our discord: discord.gg/MzTR3zEScript: Hey my name is Keith I'm with Annnex Engineering and we want to to wish everyone happy holidays! This year has been a rough one, but we hope that doesn't spoil the festivities. I am sure some of you have noticed the competitive speed benchys that have been making the rounds on youtube. We love that this is happening and think it's a great way to influence the 3d printing community to design better and faster printers, to find the limits of our machines and to improve upon them. With that said we want to OFFICIALLY invite the community to the #SpeedBoatRace. The goal is simple, print a benchy as fast as you can! If you would like to join you can find a list of rules in our discord server which is linked in this videos description. With that, Stay safe, Stay healthy, and happy printingRules: (Please see discord for any questions, etc)Hello everyone and welcome to the Annex engineering (SpeedBoatRace)! the goal is to print a benchy as fast as possible The rules are as follows; - You must use PLA, PLA+, PETG, ASA, ABS, or ABS+ - You cannot use filled, metallic, or silk filaments (these filaments typically hide defects) - The print must finish - The maximum nozzle or line width size is 0.5mm - The maximum layer height is 0.25mm - You may combine infill every other layer - You must record the whole print - You must use 3 top and bottom layers - You must use 2 walls and 10% infill - The finished print must be dimensionally accurate (within reason) bonus points if it looks good! - The machine must be powered by stepper motors - There must be a timer/clock shown in the video to verify its real time.(a phone is fine or you can show the time before and after the print) - You must share the profile! - You must post the video to Youtube and a link to said video in #speedboats - This is all in good fun and faith so just have fun!
The Trad Rack - Closed Beta Announcement Annex Engineering 2023-02-09 | A trad rack is a collection of traditional cams, nuts and other climbing equipment used in climbing. Inspired by this ingenious piece of climbing/mountaineering kit, we developed our take, thus bringing one of the most flexible and expandable MMUs developed to date.Beta Signup Available Here: https://forms.gle/6mjbbGU7nZ2DkA7z6ANNEX Discord: discord.gg/MzTR3zEFurther information can/will be found here: github.com/Annex-Engineering/TradRackTrack: Elektronomia & RUD - Memory [NCS Release]Music provided by NoCopyrightSounds.Watch: youtu.be/EnuGdwI0W1gFree Download / Stream: http://ncs.io/Memory
K2 - Release 3.0 - Does Some Meshing with Beacon Annex Engineering 2022-11-21 | Release 3.0 for K1 and K2, coming to public beta soonProbe available at beacon3d.com, standard equipment for this release.
Bacon Measures K3s Z Backlash Annex Engineering 2022-11-08 | As the title says. We bet your z probe cant do this.
Tycho makes Bacon (100 x 100 mesh bed speed run) Annex Engineering 2022-08-19 | shot in november 2021, 100x100 mesh
K3+ does the No Comment Annex Engineering 2022-08-19 | Amex engineering, where we take out lines of credit for tasty bacon
K3 does the No Comment Annex Engineering 2022-07-22 | Amex engineering, where we take out lines of credit for tasty bacon
Tycho does the No Comment Annex Engineering 2022-07-07 | Amex engineering, where we take out lines of credit for tasty bacon
MRRF 2022 Preview - ANNEX Trad Rack Annex Engineering 2022-06-27 | Introducing the ANNEX Engineering Trad Rack, a MMU system designed to perform just like our printers. Fast, Amazing and Reliable.Further information can/will be found here: github.com/Annex-Engineering/TradRack
K3 - Unicorn Vomit Edition Annex Engineering 2021-12-03 | User robertt - k3now on our discord equipped his beta K3 with a set of addressable RGB lights to create this stunning shows.The light strips can be found here: https://a.aliexpress.com/_mLLpfzYfor more information, please join our discord: discord.gg/MzTR3zE
#speedboatrace - K3 goes for broke on 24v - 4:39 Annex Engineering 2021-09-05 | a 4:39 run on kmobs K3. The goal of this run was to prove out the hardware on 24v0.9 degree steppers, mosquito mag hotend, ascender extruder, and a otherwise completely stock buildYou can follow him on twitter here: http://www.twitter.com/kmobsplease join the speedboat race on our discord: discord.gg/MzTR3z
#speedboatrace - K3 goes for quality on 24v - 5:15 Annex Engineering 2021-09-05 | a 5:15 run on kmobs K3. The goal of this run was "a usable part of acceptable quality"0.9 degree steppers, mosquito mag hotend, ascender extruder, and a otherwise completely stock buildYou can follow him on twitter here: http://www.twitter.com/kmobsplease join the speedboat race on our discord: discord.gg/MzTR3z
#speedboatrace - Tycho Does the Time Warp - on 24v Annex Engineering 2021-08-26 | a 4:00 run on tycho. Nothing has changed hardware wise from the 4:36 run. - 110k accel, 60k accel to decel, 60 scv - 24v psuplease join the speedboat race on our discord: discord.gg/MzTR3z
IC3D: 3DP Toys for Tots Event Annex Engineering 2021-08-07 | IC3D: 3DP Toys for Tots: ic3dprinters.com/2021-toysThanks Kmobs for sharing this event with us, see him printing toys for tots here: youtube.com/watch?v=iuZ5mtCJfqsMusic: Early Morning by Infraction - No Copyright Musicinaudio.org/track/early-morning
#speedboatrace - Tycho - Full Bore - The Rough Cut Annex Engineering 2021-07-15 | people had asked for just the rough cut without music, providing
#speedboatrace - Tycho - Full Bore Without Enough Cooling - 4:36 Benchy Annex Engineering 2021-07-15 | a 4:36 run on tycho with minimal tuning. Settings and specs in the video.we are very much out of cooling, and plan to fix that in a future installmentplease join the speedboat race on our discord: discord.gg/MzTR3z
K3 - When? Annex Engineering 2021-06-19 | Coming soon .... K3::::::::::::::::::::Music: Powerup! - Jeremy BlakeSupport by RFM - NCM: bit.ly/2xGHypM::::::::::::::::::::
K3 - Mesh Bed Leveling - Speed Run Annex Engineering 2021-06-10 | Probing the bed, for mesh leveling, in a 7x7 array at a relatively brisk pace
Quickdraw Assembly Guide - The Magnetic Z Probe Annex Engineering 2021-05-31 | This video is intended to be a quick summary on how to assemble the Quickdraw magnetic z probe. The files can be found on github here: github.com/Annex-Engineering/Quickdraw_ProbeIf you require additional support or have questions, our discord can be found here: discord.gg/MzTR3zE
K3 - Tri-Bed Level - Tri-Screw Z with Quickdraw Probe Annex Engineering 2021-05-17 | kmob's K3 beta machine, doing a tri-bed level with the quickdraw magnetic z probe. Also includes a purge and wipe at the endTo find out more information about K3, please see: github.com/Annex-Engineering/Gasherbrum-K3
#SpeedBoatRace - Tychos First Baby - 5:34 Benchy Annex Engineering 2021-05-15 | Annex Tycho printing a single benchy in ABS, Round 1 (actual attempt 12) (settings, etc in video).please join the speedboat race on our discord: discord.gg/MzTR3zE
Crampon - Nozzle Mounted Input Shaper Measuring Test Annex Engineering 2021-05-06 | A custom PCB that mounts to the nozzle location of any hotend, and allows the input shaper frequencies to be measured more directly. Powered by klipper.The printer pictured is an Annex Engineering K3
K3 - Beta - Tri-Bed Level Annex Engineering 2021-03-08 | RyanG's K3 beta machine, doing a tri-bed level with the mag probeTo find out more information about K3, please see: github.com/Annex-Engineering/Gasherbrum-K3
#SpeedBoatRace - K2 does a 6:57 Benchy Annex Engineering 2021-01-31 | Annex K2 - Summit Edition printing a single benchy in ABS, Round 5 (actual attempt 15) (settings, etc in video).please join the speedboat race on our discord: discord.gg/MzTR3zESong: TyphoonMusic provided by EhrlingVideo Link: soundcloud.com/ehrling
#SpeedBoatRace - K2 does a 7:33 Benchy Annex Engineering 2021-01-31 | Annex K2 Summit Edition printing a single benchy in ABS, Round 4 (settings, etc in video).please join the speedboat race on our discord: discord.gg/MzTR3zESong: MegaEnx - Tomorrow (Vlog No Copyright Music)Music provided by Vlog No Copyright Music.Video Link: youtu.be/nb_3ZfP80f4
#SpeedBoatRace - Off the Wagon with a Busted Stack Annex Engineering 2020-12-24 | Annex K2 printing a single benchy in ABS, Round 3 (settings, etc in video).please join the speedboat race on our discord: discord.gg/MzTR3zE::::::::::::::::::::Music: Runaways by MegaEnx is licensed under a Creative Commons License.https://creativecommons.org/licenses/...Support by RFM - NCM: bit.ly/2xGHypM::::::::::::::::::::
#SpeedBoatRace - K3 Edition Annex Engineering 2020-12-23 | K3 Printer - Razgriz on Annex Discord200/250 mm/s perimeters300 mm/s walls0.45 LW/0.25 LH12k perimeter accels/14k infill accels (started at 1.5k accel by accident)10% rectilinear infill2 perimeters, 3 bottom 3 top layersmaterial: Inland PLA+please join the speedboat race on our discord: discord.gg/MzTR3zE
#SpeedBoatRace - Harder, Faster, Stronger, But Not Broken...Yet Annex Engineering 2020-12-22 | Annex K2 printing a single benchy in ABS, Round 2 (settings, etc in video).please join the speedboat race on our discord: discord.gg/MzTR3zE
VORON Design Test Cube - Double or Nothing Annex Engineering 2020-12-20 | VORON Design Test Cube at 200% scale (40mm per SuperSlicer) - rest of info in video, did the annex cube, had to do the voron cube in fairnessmusic graciously provided by: www.bensound.comvoron_cube_v6.stl provided inside SuperSlicer, and is a product of VORON Design
Annex Test Cube - Printing at Warp Speed Annex Engineering 2020-12-20 | Annex Test Cube at 100% scale - rest of info in videomusic graciously provided by: www.bensound.com
#SpeedBoatRace - Smashing the Current (at the Time) Record Annex Engineering 2020-12-19 | Annex K2 printing a single benchy in ABS (settings, etc in video). LH is 0.25, LW is 0.5 (typo)Sorry for the potato sound quality, in the process of sourcing a proper mic and camera, but thanks to covid I will have to wait a bit.to join the speedboat race, please see our discord: discord.gg/MzTR3zEprofiles and such can be found on our github: http://annex-engineering.com
K3 - Beta - Motion System Testing Annex Engineering 2020-11-29 | Razgriz K3 - Motion System TestK3 image credit: Wikipedia user Flothias, Licensed under CC-SA
Sherpa Mini Assembly Annex Engineering 2020-11-24 | How to Assemble Your Sherpa Mini - Narrated By Coffee
K2 - Release 2 Alpha - K2 Does Benchies Annex Engineering 2020-11-24 | An easy quality test for the K2 R2 Alpha Gantry - 0.40 LW x 0.25 LH - typo in video - 250mm/s commanded, throughout the print. - 12k mm/s^2 accelerations - Sherpa Mini Extruder - Slice Engineering Mosquito Magnum Hotend - Dual Fysetc S6s, with TMC2209s, Running Klipper Firmware. 1.16A RMS, Interpolate off, 1/16MSMore details about the printer can be found here: github.com/Annex-Engineering/Chhogori-K2-Summit-EditionOur discord is here: discord.gg/MzTR3zE
K2 - Release 2 Alpha - Tri Bed Level with Piton Annex Engineering 2020-11-20 | Release 2 alpha, Quick tri bed level testing with piton and a 110c bed
K3 - Alpha - 400mm/s + 13k Accel Printing Annex Engineering 2020-11-03 | K3 Alpha, printing at 400mm/s and 13k mm/s2 Acceleration, 5 Square Corner (Klipper Things)
Sherpa Mini Teaser Annex Engineering 2020-08-23 | Soon, from Annex Engineering - Sherpa MiniDesigned by: AnlinVideo Edited by: PapejellyDiscord: discord.gg/MzTR3zEGithub: github.com/Annex-EngineeringMusic: Neon Red (Instrumental Remix) by Miracle of Soundyoutube.com/watch?v=M_5e8IBfOQQ
K2 3D Printer - 400mm/s Printing and 20k mm/s^2 acceleration testing Annex Engineering 2020-08-09 | K2 3D Printer - 400mm^2 x 250mm z build volume - Coffee's Basecamp20k accelerations across the board400mm/s travels, 400mm/s vase mode
K2 3D Printer - 400mm/s Printing and 12k mm/s^2 acceleration testing Annex Engineering 2020-05-02 | K2 3D Printer - 350mm^3 build volume12k accelerations across the board400mm/s travels (had skipping issues with 500, motors out of torque), 400mm/s solid infill, 200mm/s perimeters, 150mm/s outer perimeters and top layerABS Filament from 3DXtech, TriangleLab Volcano Clone, Authentic Bondtech BMG, LDO 0.9deg steppers all around
K2 3D Printer - 300mm/s Printing and 12k mm/s^2 acceleration testing Annex Engineering 2020-05-02 | K2 3D Printer - 350mm^3 build volume12k accelerations across the board500mm/s travels, 300mm/s solid infill, 150mm/s perimeters, 80mm/s outer perimeters and top layerABS Filament from 3DXtech, TriangleLab Volcano Clone, Authentic Bondtech BMG, LDO 0.9deg steppers all around
K2 durability test Annex Engineering 2020-05-01 | 8k, yes 8k accels, 250 mm/s infill, 125 mm/s perimeters, 70mm/s outer and top layer. 0.4/0.2 nozzle/layer height, ABS, TL volcano
K2 speed testing Annex Engineering 2020-05-01 | 6k accels, 250 mm/s infill, 125 mm/s perimeters, 70mm/s outer and top layer. 0.4/0.2 nozzle/layer height, ABS, TL volcano
K2 First Klipper Print Annex Engineering 2020-04-15 | The duet3 had massive software issues. Threw the duet2 and klipper back in
K2 first print Annex Engineering 2020-04-08 | First print, zero tuning, rattle is the back panel (still needs foam)0.8mm nozzle 0.4 layer heights, slow 40mm/s
K2 Mesh Bed First Probe Annex Engineering 2020-04-08 | Annex Engineering K2 development prototype mesh bed commissioning
Ascender - Pre-Alpha Print 2 Annex Engineering 2020-02-01 | Pre alpha testing of the ascender direct drive extruder platform
