7.5 x 55 swiss. Case prep and powder slection. (Part#1) @Thorsaxe777

Uploaded January 2017 | Updated September 2026, 2 weeks ago

Powders H-4895 and IMR-4064 here are taken from the Hornady Manual. Both Bullet's are the SMK selections.

7.5 x 55 swiss. Case prep and powder slection. (Part#1)

Just a little next day thought on load development and other stuff.

.38 special, .357 MP Molds H&G#50 review.

7.5X55 Swiss,178 grain, IMR 4320 in boxer Primed in PPU Brass.

CZ-75 and first thoughts. (Bench review)

.44 Magnum loadings with the Lyman 429421. shootout.

M-1, Gas plug, Barrel nut, and gas cylinder. a V.R. to KFW.

MP .38 HBWC Mold first Bullets.(Fantastic Mold).

Thors Axe |

7.5 x 55 swiss. Case prep and powder slection. (Part#1)

Name: MP .38 HBWC Mold first Bullets.(Fantastic Mold). @Thorsaxe777
Uploaded: 2017-08-29T01:29:31-0400
Duration: 8 min 17 s
Description: This mold took a little figuring out for proper temperature as far as Culls. deformity and Voids in filling the cavities. An increase of 20 degrees of metal temperature on the furnace cleared up that from happening.