Uploaded August 2021 | Updated November 2026, 4 days ago
fridge magnet pole pitch was 3.84mm, sensors were RR111 from coto/redrock and i used a bluepill stm32 adc for the 3 phases. the phases were 120 degree offset electrically. the TMR sensors are ~ $1 each and the bluepill can be had for ~4. This is a pretty cheap linear encoder/linear position sensor with decent accuracy compared to using a caliper. using actual linear scale tape may dramatically improve the accuracy.
fridge magnet pole pitch was 3.84mm, sensors were RR111 from coto/redrock and i used a bluepill stm32 adc for the 3 phases. the phases were 120 degree offset electrically. the TMR sensors are ~ $1 each and the bluepill can be had for ~4. This is a pretty cheap linear encoder/linear position sensor with decent accuracy compared to using a caliper. using actual linear scale tape may dramatically improve the accuracy.




