Uploaded March 2017 | Updated September 2026, 2 weeks ago
For more information: drdflo.com/pages/Projects/6Axis-Robotic-Arm.html
Dr. D-Flo was lucky enough to receive a beta kit for Roboteurs' 3D printable 6-axis robotic arm, known as the RBX1. This is not a sponsored video because Dr. D-Flo payed for the kit, so he is not obligated to give Roboteur a good review. However, this is such an awesome project! If you are familiar with 3D printed robotics you may notice that RBX1 is a mirror image of BCN3D's MOVEO robotic arm. There are two major differences between the RBX1 and MOVEO. First, RBX1 has an extra axis located between the wrist and the gripper, and second, the stepper motors are powered by Roboteurs' SlushEngine. Furthermore, Roboteurs provides code that allows you teach the robotic arm movement with an xbox controller. This software greatly decreases the difficulty of this project.
For more information: drdflo.com/pages/Projects/6Axis-Robotic-Arm.html
Dr. D-Flo was lucky enough to receive a beta kit for Roboteurs' 3D printable 6-axis robotic arm, known as the RBX1. This is not a sponsored video because Dr. D-Flo payed for the kit, so he is not obligated to give Roboteur a good review. However, this is such an awesome project! If you are familiar with 3D printed robotics you may notice that RBX1 is a mirror image of BCN3D's MOVEO robotic arm. There are two major differences between the RBX1 and MOVEO. First, RBX1 has an extra axis located between the wrist and the gripper, and second, the stepper motors are powered by Roboteurs' SlushEngine. Furthermore, Roboteurs provides code that allows you teach the robotic arm movement with an xbox controller. This software greatly decreases the difficulty of this project.
