Uploaded May 2017 | Updated September 2026, 4 hours ago
Please watch: "DJI Modding Lounge"
youtube.com/watch?v=azg981yRCmE --~--
Cruised 6.5 miles up Lookout Point Lake in Lowell, Oregon. This was shot with a DJI Phantom 3 Advanced, running a Pro Sniper Series 19dbi antenna, boosted with 4w amps running on an iPad and DJI Go 2.9.2. Aircraft has battery mod with Multistar 6600 lihv 4s battery attached.
Please watch: "DJI Modding Lounge"
youtube.com/watch?v=azg981yRCmE --~--
Cruised 6.5 miles up Lookout Point Lake in Lowell, Oregon. This was shot with a DJI Phantom 3 Advanced, running a Pro Sniper Series 19dbi antenna, boosted with 4w amps running on an iPad and DJI Go 2.9.2. Aircraft has battery mod with Multistar 6600 lihv 4s battery attached.








![Easily mod your DJI Inspire 1 on any firmware version
We got more coming! This video shows how to easily mod your Inspire 1 aircraft to make it faster and remove limitations. You need JRE installed, please install that first.
FLY SAFE AND RESPONSIBLY. DONT FLY IN RESTRICTED AREAS, BY AIRPORTS OR ANYTHING UNSAFE.
Github: https://github.com/digdat0/P3I1-FW-Toolv2
Direct Download of tool: https://github.com/digdat0/P3I1-FW-Toolv2/archive/master.zip
For consulting services please email me at flyflydrones@gmail.com
Supports
- Inspire 1
- Inspire 1 v2
- Inspire 1 Pro
- Inspire 1 RAW
Mods:
- Flight Speed increase (GPS+ATTI)
- Faster vertical ascent/descent
- Height restriction removed
- Flight zone restriction removed
- Remove battery forced landings
Parameters:
advanced_function.height_limit_enabled = 2
flying_limit.max_height = 9000
control.horiz_vel_atti_range_0 = 35 (Gps)
control.atti_limit_0 = 50 (Atti)
control.atti_range_0 = 50 (atti upper limit)
control.vert_up_vel = 8
control.vert_down_vel = 8
airport_limit_cfg.cfg_search_radius = 1
airport_limit_cfg.cfg_disable_airport_fly_limit = 1
airport_limit_cfg.cfg_limit_data = 20250910
airport_limit_cfg.cfg_enable[FLY_LIMIT_TYPE_SPECIAL] = 1
advanced_function.driver_license_limit_enable = 2
advanced_function.viechle_license_limit_enable = 2
voltage2.user_set_smart_bat = 0
voltage2.level_2_function = 0
voltage2.level2_smart_battert_land = 0
voltage2.level_2_voltage = 0
voltage.level_2_protect_type = 0
Rename file name: INMCAPPFw1.bin
Credits to all the OGs, Matioupi, mefistotelis, fvantienen, jcase, jezzab, jan and anyone else involved with making the toolset or associated tools. Heres to the community
This is based on work from mefistotelis and his firmware toolset. Thank you. https://github.com/o-gs/dji-firmware-tools Easily mod your DJI Inspire 1 on any firmware version](https://i.ytimg.com/vi/EkubqNTFdfw/mqdefault.jpg)

