MandicReally | 6 Easy Tips to Make Your 3D Designs Extraordinary! Pro Tips @MandicReally | Uploaded August 2023 | Updated October 2024, 1 week ago.
To try everything Brilliant has to offer—FREE—for a full 30 days, visit brilliant.org/MandicReally . The first 200 of you will get 20% off Brilliant’s annual premium subscription.
In this video we will discuss 6 Pro Tips to make your 3d designs extraordinary! Take your 3d designs up a notch & catch the attention of 3d printers everywhere. This simple checklist will help you get your STLs ready for the masses & make 3d printers happier with the 3d designs you produce. Whether you are a beginner 3d designer or a pro 3d modeler, you may well pick up a trick or two from these pro tips!
*** The Pre-Press Checklist FREE: https://than.gs/m/925571
*** Download MandicReally Models FREE: thangs.com/mandicreally
-----------------------------------------------------------------------------------------------
Please consider supporting by checking out my various links:
mandicreally.com/links
-----------------------------------------------------------------------------------------------
Filmed with:
*** Main Camera: amzn.to/3c6ULgV
*** Main Lens: amzn.to/3c616cp
*** Overhead Camera: amzn.to/2U4b1nZ
*** Video Recorder Used: amzn.to/3ymN90U
*** Action Camera: amzn.to/2ATHS73
*** Second Camera: amzn.to/371EhBM
*** B-Roll Lens: amzn.to/2xmg85L
*** Wide Angle Lens: amzn.to/2YiZTmH
*** Slider: amzn.to/3nGZ1Uh
*** Lav Mic: amzn.to/2DFwgR5
*** Shotgun Mic: amzn.to/2IjTJiB
*** Mini Tripod: amzn.to/2Eok8Fw
*** Monopod - amzn.to/2C1YEMU
*** Tripod: amzn.to/2yASruf
*** Gimbal: amzn.to/2FNwesV
*** Primary Lighting: amzn.to/2jHROnW
*** Additional Lighting: amzn.to/2DImspx
*** RGB Lights: amzn.to/2UUGAOk
*** Drone: amzn.to/2yDkwkI
-----------------------------------------------------------------------------------------------
Timestamps:
0:00 - Intro
1:00 - Brilliant Sponsor Spot
2:09 - Why?
2:44 - 1: HQ STLs
5:58 - 2: Print Orientation
8:18 - 3: Check for Watertight
11:44 - 4: STEP Files
14:23 - 5: Slice Your Designs
16:01 - 6: PRINT YOUR DESIGNS!
17:18 - FREE Checklist Download
17:34 - Outro
The opinions expressed in this video are my own, from my personal experience. This is not a paid product advertisement. Please feel free to let me know what you think of this tool, or suggest alternatives I should check out. Disclaimer: This is not a paid advertisement. This video is solely my opinions from the use of these products and based on the specifications of them. Some of the links provided are AMAZON AFFILIATE LINKS or others. Affiliate links give the MandicReally a small advertising fee for every purchase made via those links. This does not cost you anything more than if you purchased them normally.
To try everything Brilliant has to offer—FREE—for a full 30 days, visit brilliant.org/MandicReally . The first 200 of you will get 20% off Brilliant’s annual premium subscription.
In this video we will discuss 6 Pro Tips to make your 3d designs extraordinary! Take your 3d designs up a notch & catch the attention of 3d printers everywhere. This simple checklist will help you get your STLs ready for the masses & make 3d printers happier with the 3d designs you produce. Whether you are a beginner 3d designer or a pro 3d modeler, you may well pick up a trick or two from these pro tips!
*** The Pre-Press Checklist FREE: https://than.gs/m/925571
*** Download MandicReally Models FREE: thangs.com/mandicreally
-----------------------------------------------------------------------------------------------
Please consider supporting by checking out my various links:
mandicreally.com/links
-----------------------------------------------------------------------------------------------
Filmed with:
*** Main Camera: amzn.to/3c6ULgV
*** Main Lens: amzn.to/3c616cp
*** Overhead Camera: amzn.to/2U4b1nZ
*** Video Recorder Used: amzn.to/3ymN90U
*** Action Camera: amzn.to/2ATHS73
*** Second Camera: amzn.to/371EhBM
*** B-Roll Lens: amzn.to/2xmg85L
*** Wide Angle Lens: amzn.to/2YiZTmH
*** Slider: amzn.to/3nGZ1Uh
*** Lav Mic: amzn.to/2DFwgR5
*** Shotgun Mic: amzn.to/2IjTJiB
*** Mini Tripod: amzn.to/2Eok8Fw
*** Monopod - amzn.to/2C1YEMU
*** Tripod: amzn.to/2yASruf
*** Gimbal: amzn.to/2FNwesV
*** Primary Lighting: amzn.to/2jHROnW
*** Additional Lighting: amzn.to/2DImspx
*** RGB Lights: amzn.to/2UUGAOk
*** Drone: amzn.to/2yDkwkI
-----------------------------------------------------------------------------------------------
Timestamps:
0:00 - Intro
1:00 - Brilliant Sponsor Spot
2:09 - Why?
2:44 - 1: HQ STLs
5:58 - 2: Print Orientation
8:18 - 3: Check for Watertight
11:44 - 4: STEP Files
14:23 - 5: Slice Your Designs
16:01 - 6: PRINT YOUR DESIGNS!
17:18 - FREE Checklist Download
17:34 - Outro
The opinions expressed in this video are my own, from my personal experience. This is not a paid product advertisement. Please feel free to let me know what you think of this tool, or suggest alternatives I should check out. Disclaimer: This is not a paid advertisement. This video is solely my opinions from the use of these products and based on the specifications of them. Some of the links provided are AMAZON AFFILIATE LINKS or others. Affiliate links give the MandicReally a small advertising fee for every purchase made via those links. This does not cost you anything more than if you purchased them normally.
