$6 DIY Skateboard manny pad made with 2 pallets, a bedframe and scrap wood @MisterGazda
$6 DIY Skateboard manny pad made with 2 pallets, a bedframe and scrap wood  @MisterGazda
Uploaded March 2021 | Updated November 2026, 2 days ago
Thanks Danny!
Some manny pad Tips:
- if you can't get your hands on a bedframe you can buy angle iron at hardware store/Depot/Lowes
- you'll need to drill holes through the bedframe/angle iron and then screw it securely to the pallets. Drilling holes through metal takes patience (and it may seriously dull your drill bit)
- it's a bit of a challenge to make sure the 2 pieces of angle iron meet up very closely so you don't get hung up on a grind. Take your time to get it as close as you can.
- you can see at the very beginning of the video we put wood blocks under the one side to level the pallets. You may need to do that also. It doesn't have to be perfectly level, but it shouldn't rock or move around that much
- definitely make sure none of the metal has sharp edges and none the screws stick out. That can mess you up!
- go out and rip!

Copyright Gazdonian Productions 2021
$6 DIY Skateboard manny pad made with 2 pallets, a bedframe and scrap woodTrader Joes Paper Bag TestHow to Draw Profiles #2: Profile Practice Sheet 59 [SEE LINK IN DESCRIPTION]How to Draw Cross Section Topographic Profiles845 Plate Tectonics Part 5 Sample QuestionsPhysics - Acceleration, Velocity Skateboard861 Geologic History Part 1 Earths AgeAPPLIED PHYSICS 35 updated 2015803 Mapping Part 3 Time ZonesMorse Code B882 Seasons Part 2 Suns Shadow882 Earth Science Review: Seasons Part 2 Suns Shadow
GazdonianProductions |

$6 DIY Skateboard manny pad made with 2 pallets, a bedframe and scrap wood

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER