How to make a Bottle Opener | Wood and Metal project Woodworking Barcelona 2026-09-23 | How to make a Bottle Opener | Wood and Metal project
ENTRY TABLE w/ embedded Hydraulic Tiles Woodworking Barcelona 2021-02-26 | In this video I'll show how I made an Entry Table with steel base and Chestnut top from a log I milled 18 months ago in which I embedded 3 antique hydraulic tiles. This table is a present for my parents.If you like this video, please LIKE and SUBSCRIBE. Leave a comment with your thoughts, I'll be glad to answer you. My Secondary Channel: youtube.com/channel/UCCR5fV-NiCQ7Vp0vCjw3tpAThanks to Bosch Professional to support my work.BOSCH POWER TOOLS: - GSR 18V-60 FC youtu.be/zRJggEsARyI- GWX 9-115 S youtu.be/apUEoFQaNNc- GBH 18V-26 F youtu.be/SnZVDzJM4mc- GDX 18V-200 C youtu.be/9GDa-xJlgGUOther companies that support my work:- PIHER CLAMPS to support this channel: http://www.piher.comSupport me on patreon: patreon.com/wwbFollow me on my social media:facebook.com/woodworkingbarcelonainstagram.com/woodworkingbarcelona
Oak Beam RESTORATION / New Workshop Lintel Woodworking Barcelona 2020-12-21 | In this video I'll show how I restored an old oak beam that will be used as lintel for my new workshop exit door to the backyard. I've upcycled 9 of these beams to use them as lintels for our new home. These ancient beams come from a family's 200 years old farmhouse.I hope you enjoy this video. Please LIKE and SUBSCRIBE for more content. My Secondary Channel (POWER TOOL REVIEWS): youtube.com/channel/UCCR5fV-NiCQ7Vp0vCjw3tpAThanks to FARTOOLS, FROSCHEMIE and PIHER CLAMPS for their support.- FARTOOLS fartools.com- FROSCHEMIE froschemie.com- PIHER CLAMPS http://www.piher.comSupport me on patreon: patreon.com/wwbFollow me on my social media:facebook.com/woodworkingbarcelonainstagram.com/woodworkingbarcelona
DIY Outdoor Cat Shelter Woodworking Barcelona 2020-11-17 | Recently, a local stray kitten settled in our backyard. "Fosca" plays with our chickens and watches out for field mice (we hope!) in exchange for frequent food offerings and the odd petting session. In this video, I'll show you how I built her a winter shelter. Our could season is no joke, and I wanted her to have a well-insulated home to call her own.If you like this video, please LIKE and SUBSCRIBE. Leave a comment with your thoughts, I'll be glad to answer you.If you're interested in get the PLANS of this Cat Shelter, help me to achieve 1000 likes and I'll share freely to everyone. My Secondary Channel: youtube.com/channel/UCCR5fV-NiCQ7Vp0vCjw3tpAThanks to Bosch Professional to support my work.BOSCH POWER TOOLS: - GSR 18V-60 FC youtu.be/zRJggEsARyI- GWX 9-115 S youtu.be/apUEoFQaNNc- GBH 18V-26 F youtu.be/SnZVDzJM4mc- GDX 18V-200 C youtu.be/9GDa-xJlgGUOther companies that support my work:- PIHER CLAMPS to support this channel: http://www.piher.comSupport me on patreon: patreon.com/wwbFollow me on my social media:facebook.com/woodworkingbarcelonainstagram.com/woodworkingbarcelona
CHICKEN COOP / How to / Part 1 - Foundations Woodworking Barcelona 2020-09-09 | In this video I'll show the first step of our new chicken coop build: the concrete foundations. I've no previous experience on using concrete. On the next videos I'll cover the timber frame, walls, roof, insulation and feeding and water systems. If you like this video, please LIKE and SUBSCRIBE. Leave a comment with your thoughts, I'll be glad to answer you.*** My Secondary Channel: youtube.com/channel/UCCR5fV-NiCQ7Vp0vCjw3tpAThanks to Bosch Professional to support my work.BOSCH POWER TOOLS: - GSR 18V-60 FC youtu.be/zRJggEsARyI- GWX 9-115 S youtu.be/apUEoFQaNNc- GBH 18V-26 F youtu.be/SnZVDzJM4mc- GDX 18V-200 C youtu.be/9GDa-xJlgGUOther companies that support my work:- PIHER CLAMPS to support this channel: http://www.piher.com- KLINGSPOR Abrasives klingspor.com/products/index.htm Support me on patreon: patreon.com/wwbFollow me on my social media:facebook.com/woodworkingbarcelonainstagram.com/woodworkingbarcelona
SUSHI Serving TRAY / How to / Woodworking Woodworking Barcelona 2020-04-21 | In this video I'll show how I made a Serving Tray from Reclaimed Wood from old pine shelves. I used sliding dovetails for the base. I choose one of my prefered finishes: Shou-Sugi-Ban (焼杉板) also known as Yakisugi which adds really deep texture on soft woods as pine or cedar, besides an awesome protection for wood.If you like this video, please LIKE and SUBSCRIBE. Leave a comment with your thoughts, I'll be glad to answer you.Companies that support my work:- DEWALT POWER TOOLS: * DCG414T2 Flexvolt Angle Grinder: youtu.be/k1FD8l6IqZs* DCF887 Brushless Impact Driver: youtu.be/Tc-sytDBK7Q* DEWALT DWE6423 Random Orbit Sander: youtu.be/zSrp9zpT2p0* DEWALT DWE7492 Table Saw: youtu.be/uCe5MRVMwzI* DEWALT Router Combo DWP611PK: youtu.be/gZBHFnLWehk- PIHER CLAMPS to support this channel: http://www.piher.com- KLINGSPOR Abrasives klingspor.com/products/index.htm Support me on patreon: patreon.com/wwbFollow me on my social media:facebook.com/woodworkingbarcelonainstagram.com/woodworkingbarcelona
Knife Making: Hand Forged Japanese Knife / EXTREMELY sharp Woodworking Barcelona 2020-02-21 | My brother and I decided to forge a pair of japanese fillet knives out of 1095 steel. Both single beveled; one for left handed and other for right handed. In this video you'll see how we fully forged and ground the two knives. As we were on a rush, we decided to focus on his knife to finish it before he left. Sadly we couldn't do it so I decided to finish it for his next visit ;).If you like this video, please LIKE and SUBSCRIBE.Leave a comment with your thoughts, I'll be glad to answer you.Follow me on my social media:facebook.com/woodworkingbarcelonainstagram.com/woodworkingbarcelonaSupport me on patreon: patreon.com/wwbCompanies that support my work (thanks!):- KLINGSPOR Abrasives klingspor.com/products/index.htm- PIHER CLAMPS http://www.piher.com- DEVIL FORGE http://www.devil-forge.com & ebay.com/str/DEVIL-FORGE-2014- DEWALT POWER TOOLS: * DCG414T2 Flexvolt Angle Grinder: youtu.be/k1FD8l6IqZs* DCF887 Brushless Impact Driver: youtu.be/Tc-sytDBK7Q* DEWALT DWE6423 Random Orbit Sander: youtu.be/zSrp9zpT2p0* DEWALT DWE7492 Table Saw: youtu.be/uCe5MRVMwzI* DEWALT Router Combo DWP611PK: youtu.be/gZBHFnLWehk
FIRE STARTERS, easy, natural, long burn for STOVE / How to Woodworking Barcelona 2020-01-29 | In this video I'll share a great tip on how to make DIY fire starters with recycled material. You'll only need some cork from wine bottles and some burning alcohol (isopropyl alcohol or isopropanol).I hope you like this video. Leave a comment with your thoughts, I'll be glad to answer you.Support me on patreon: patreon.com/wwbFollow me on my social media:facebook.com/woodworkingbarcelonainstagram.com/woodworkingbarcelona
SILENT ANVIL / Kill Ringing / How to / Blacksmith Woodworking Barcelona 2020-01-16 | In this video I'll show how I silenced my anvil. After restoring my anvil and making a base for it, I realized how loud it was when working with it. My goal is to dampen that noise. There are many other ways to muffle it that I'm not going to be exploring in this video, such as fabricating a heavier stand, adding heavy chains... However, those do not fit in with my desire for quick, easy, and affordable solutions - preferably with the materials I already have around my workshop.The results shown in the video come from tests performed without precision equipment and affected by subjective assessments (mine). The purpose of said tests was to measure the relative effectiveness of several simple steps one can take to silence their anvil.I hope you like this video. Leave a comment with your thoughts, I'll be glad to answer you.More Blacksmithing videos:- Set Up a GAS FORGE: youtu.be/AQKDz_Ern8c- ANVIL Restoration & Shou Sugi Ban Stand: youtu.be/CJu13xQ3RkMSupport me on patreon: patreon.com/wwbFollow me on my social media:facebook.com/woodworkingbarcelonainstagram.com/woodworkingbarcelona
Old ANVIL Restoration + Stump STAND / How to / Blacksmith Woodworking Barcelona 2020-01-02 | In this video I explain how to restore a 100-year-old Anvil and also how I made a base for it. The anvil stand was made by an Ash-tree stump in which I applied Shou Sugi Ban technique. I hope you enjoyed this project blacksmith project.**This video has been reloaded. It was originally uploaded on November 27. Inexplicably it was deleted from this channel. **Thanks to DEWALT for supporting this channel.DEWALT Power Tools reviews: - DWE7492 Table Saw: youtu.be/uCe5MRVMwzI- DCG414T2 Flexvolt Angle Grinder: youtu.be/k1FD8l6IqZs- DCF887 Brushless Impact Driver: youtu.be/Tc-sytDBK7Q- DEWALT DWE6423 Random Orbit Sander: youtu.be/zSrp9zpT2p0Thanks PIHER CLAMPS to support this channel: http://www.piher.comSupport me on patreon: patreon.com/wwbFollow me on my social media:facebook.com/woodworkingbarcelonainstagram.com/woodworkingbarcelona
Chainsaw MILL | How to Slab a Log | Simple Cheap Portable Woodworking Barcelona 2019-08-01 | In this video I’ll share with you my initial experiences with chainsaw milling. I’ll be showing the mistakes I made, as well as the lessons I learnt.I’m using chainsaw mill from a Chinese supplier (TOPQSC). It’s an affordable jig, and easy to put together and use. You can watch how easy it is to assemble on the bottom-right corner. I’ll link to a video on my secondary channel of the full process.Before milling a log, it’s best to remove all the bark and dirt you can. Neglecting either will increase wear on your saw, and dull it faster.I’m using split firewood as wedges to prevent the log from moving sideways while milling it.I recommend mounting the chainsaw with the jig facing down and partially supported by the log.For this job I’m using a Husqvarna 266xp with a 20” bar, my first petrol chainsaw.Once the chainsaw is securely attached to the milling jig, we can fasten some planks to the log to create a flat reference surface. Here is my first mistake. As you will see, I attached those too far from the top, so I couldn’t support the jig. I was on a bit of a rush, and the top of the log was flat enough to try it freehand. The results may have been better had I not pushed too far the plastic wedges during the cut. This lifts the whole slice and pushes the chain away from its natural direction. After the first cut, I had a ridge at the end of the cut, which caused issues on the second cut. I also made another mistake using a regular cross-cut chain, which leaves a pretty rough surface and cuts slower.At the end of the second cut you can see how the cut started to go crooked and how the guide stopped running by hitting the ridge from the first cut. I solved this by flattening the surface by hand with a hatchet.On the remaining cuts the chainsaw is outfitted with a milling chain (10deg cutting edge) which makes the cut faster and leaves a better surface finish.The third cut and beyond were pretty straight forward, without any other issues. You can see how I make a full cut, without rushing, in 76 seconds.This log is from a European Chestnut that was felled on February of this year. Chestnut is considered a hardwood and, compared to oak, is nearly as strong but lightweight and half as hard, so it’s a really great wood to work with. The heartwood is durable but, as you may see during the footage, the sapwood is vulnerable to insect damage. For chain sharpening on the job site I used an appropriate file size for the chain (in this case, a 7/32” or 5.5mm diameter round file) attached to a file guide to maintain the correct angle.I got 5 90x35x4cm (35x14x2inch) chestnut boards of decent quality out of that milling job. Overall I’m very satisfied.I hope you like this video. Leave a comment with your thoughts, I'll be glad to answer you.Support me on patreon: patreon.com/wwbFollow me on my social media:facebook.com/woodworkingbarcelonainstagram.com/woodworkingbarcelonaTOPQSC Chainsaw Mill: amazon.es/dp/B07F8ZWVGZ?ref=myi_title_dp
Set Up a GAS FORGE / Blacksmith Woodworking Barcelona 2019-03-20 | In this video I'll show how my first step on Blacksmithing journey by getting a proper Forge. People of Devil Forge sent me a DFPROF1+1D forge, which is suitable for forging and heat treating small objects like knives.Those who follow me on Instagram and Facebook already know I made my firsts knives the last summer with a stock-removal approach. To obtain a better heat treatment I thought I should get a proper forge and that moves me also to get more interested in Blacksmithing.Before start using the new forge need some prep, which I'm going to show you briefly in this video.If you wait till the end of this video you'll see my first ever forged piece. Let me know if you're interested in forging or knife making.I hope you like this video. Leave a comment with your thoughts, I'll be glad to answer you.Support me on patreon: patreon.com/wwbFollow me on my social media:facebook.com/woodworkingbarcelonainstagram.com/woodworkingbarcelonaBig thank to Devil Forge:www.devil-forge.comwww.ebay.com/str/DEVIL-FORGE-2014
ZERO Clearance Bandsaw Insert / How to / Woodworking Woodworking Barcelona 2019-02-06 | In this video I'll show how I made Bandsaw Insert from a cheap cutting board. HDPE (High-density polyethylene) is a great material to make jigs, inserts and runners for your powertools in your workshop. It's really easy to make and will last more than the one which came with my bandsaw.I hope you enjoy this project. Leave your comments and questions. I’ll be pleased to answer all of them.Scheppach woodworking machines: scheppach.com/products/Woodworking.aspxScheppach power tools used on this project:Bandsaw Basa 1: scheppach.com/product-details/Bandsaege-Basa-1-scheppach----230V-50Hz-300W.aspxSanding station BTS800: scheppach.com/product-details/Band--und-Tellerschleifer-BTS800-scheppach----230V-50Hz-370W.aspxSupport me on patreon: patreon.com/wwbFollow me on my social media:facebook.com/woodworkingbarcelonainstagram.com/woodworkingbarcelona
How to Build a Fire in a Wood Stove Woodworking Barcelona 2018-12-22 | In this video I'll show you how I start a fire in my workshop's stove in less than 5 minutes with sawdust, wood shavings, and scraps from woodworking. This old stove is a gift from my brother, who bought it at a local flea market. My workshop is not connected to my house, so in winter it regularly gets down to 0C/35F inside, which is a pain. Now I can get my 30m2 (4m ceiling) workshop in half an hour and easily keep it warm while I'm working.I hope you enjoy this video. Feel free to ask whatever you want. Merry Christmas to everyone. Support me on patreon: patreon.com/wwbFollow me on my social media:facebook.com/woodworkingbarcelonainstagram.com/woodworkingbarcelona
How to make a Sheep Barn Woodworking Barcelona 2018-11-21 | In this video I'll show how I build a small barn for young sheep inside of the big sheep barn I've made 6 months ago for a relative. I've used IV-class treated construction pine for the whole project.More videos on my secondary channel:Unboxing: youtu.be/zRJggEsARyIFoolproof Test: youtu.be/cobJcR8zkQMQuick Test: youtu.be/MM-ZpokuYvISupport me on patreon: patreon.com/wwbFollow me on my social media:facebook.com/woodworkingbarcelonainstagram.com/woodworkingbarcelonaThumbnail made by: @lacabraestudi (follow her on Instagram)
Wooden SCOOP / How to / Woodworking Woodworking Barcelona 2018-10-07 | In this project I make wooden scoops from an ancient oak beam from a local farmhouse. I need those scoops for feeding my chickens. I finished one just with my homemade foodsafe wax, and for the other one I give a try with "shou sugi ban" (charred wood technique) which I think leaves a very interesting looking. Will definetly use it again for a further project.I hope you enjoy this project. Leave your comments and questions. I’ll be pleased to answer all of them.Big thank to Scheppach company for providing me tools for my woodworking projects.Scheppach woodworking machines: scheppach.com/products/Woodworking.aspxScheppach power tools used on this project:Table Saw HS 120: scheppach.com/product-details/Tischkreissaege-HS120-scheppach----230V-50Hz-2200W---315mm.aspxMitre Saw HM100MP: scheppach.com/product-details/Kappzugsaege-HM100MP-scheppach----230V-50Hz-2150W.aspxBandsaw Basa 1: scheppach.com/product-details/Bandsaege-Basa-1-scheppach----230V-50Hz-300W.aspxSanding station BTS800: scheppach.com/product-details/Band--und-Tellerschleifer-BTS800-scheppach----230V-50Hz-370W.aspxSupport me on patreon: patreon.com/wwbFollow me on my social media:facebook.com/woodworkingbarcelonainstagram.com/woodworkingbarcelona
Damascus Mallet from plastic bottles Woodworking Barcelona 2018-07-12 | In this video I'll show how I turn a bunch of plastic bottles into a Damascus pattern head HDPE carver's mallet to be used with my hand tools. It's a great opportunity for upcycling this type of plastic that we all have around. Processing HDPE is really tedious but the result deserves it. Besides, this material will last you more than any other wooden mallet head. In all previous videos about melting HDPE only show one way, using a kitchen or portable furnace. At this time I was likely to experiment using a tool that is present in most of the workshops: a heat gun. I may take a little longer, but It's easier to prevent damage to the plastic. During this video I also show how to repair small voids or defects. Also, I hope you enjoy this project. Leave your comments and questions. I’ll be pleased to answer all of them.Scheppach woodworking machines: scheppach.com/products/Woodworking.aspxTacklife tools: tacklifetools.comSupport me on patreon: patreon.com/wwbFollow me on my social media:facebook.com/woodworkingbarcelonainstagram.com/woodworkingbarcelonaThis video is inspired by: youtube.com/watch?v=Fg2A61R5XTw
Old Rusty CLAMP RESTORATION / How to / Metalworking Woodworking Barcelona 2018-06-27 | In this video I'm going to show you how I restore this wasted Piher classic f clamp with simple steps, using a knoted wire cup on my angle grinder, some wd40 and homemade wax. I fould this awesome clamp on a local flea market at only 3€. You can make come back to life your old rusted tools for a second chance in your workshop. I hope you enjoy this project. Leave your comments and questions. I’ll be pleased to answer all of them.More information about Piher clamps: http://www.piher.comPiher Maxipress F: http://www.piher.com/en/maxipress-clamps/180-maxipiher-f-clamp--bar35x8mm-depth12-cm.htmlPiher Classic F: http://www.piher.com/en/piher-classic-clamps/14-r-clamp--bar40x10-mm-depth15cm.htmlTacklife tools: tacklifetools.comAGK31AC Angle Grinder: amazon.com/Tacklife-AGK31AC-Grinder-Abrasive-Grinding/dp/B0719VT848Support me on patreon: patreon.com/wwbFollow me on my social media:facebook.com/woodworkingbarcelonainstagram.com/woodworkingbarcelona
AWL or Punch / How to / Woodworking / Homemade tools Woodworking Barcelona 2018-06-09 | I decided to make this homemade awl for the people of manomano. I’ve made it from a small branch of bog oak and a twisted screwdriver, using mainly my wood lathe. This is my first time with a multi-scraper. It definitely don’t replace at all my turning gouges and scrapers but it’s an easy start tool for those who want to approach to woodturning. I also use the angle grinder for shaping metal while it’s attached to the lathe (I definitely don’t recommend you to do this). I hope you enjoy this project. Leave your comments and questions. I’ll be pleased to answer all of them.Crown 268W Multi-scraper: manomano.es/otras-herramientas-de-carpintero/herramienta-multi-cuchillas-crown-3825309?product_id=3946881manomano.esFollow me on my social media:facebook.com/woodworkingbarcelonainstagram.com/woodworkingbarcelona
How to make a Shop Sign | X-Carve Woodworking Barcelona 2018-05-09 | Humus Workshop Channel: youtube.com/channel/UCZ8dMAXkhodxa4mZsmmzBWQHumus Workshop last video: youtu.be/wmvylDzE2sISupport me on Patreon here: patreon.com/wwbMore info about X-carve: inventables.com/technologies/x-carveOutro music: soundcloud.com/julian_avila/ogtrack
Make a Cutting Board Woodworking Barcelona 2018-02-08 | I've made this cutting board for my brother from a beech board that I have lying in the workshop with a crack in one end.More info about Triton power tools: tritontools.comTRA001 dual mode router: http://www.tritontools.com/en-GB/Product/Power%20Tools/Routers/TRA001TROS125 Random Orbit Sander: http://www.tritontools.com/en-GB/Product/Power%20Tools/Sanders/TROS125You can support me and become a patron:patreon.com/wwbFollow me on Social Media:facebook.com/woodworkingbarcelonainstagram.com/woodworkingbarcelona
Custom Engraved Chair for my Daughter | Real V-Carving with Easel Pro Woodworking Barcelona 2017-12-24 | More info about the new X-Carve CNC from Inventables: inventables.com/technologies/x-carveYou can support me and become a patron:patreon.com/wwbFollow me on Social Media:facebook.com/woodworkingbarcelonainstagram.com/woodworkingbarcelona
How to make a table saw handle Woodworking Barcelona 2017-10-27 | The plastic handle of my table saw broke so I decided to make a new one on the lathe using a scrap piece of Ash wood. I also decided to engrave my shop name with my new X-Carve. To add some contrast to this beatiful piece of wood I ebonized and finished it with a natural blended wax. I hope you enjoy it.More info about the new X-Carve CNC from Inventables: inventables.com/technologies/x-carveMore info about the Evolution R210CMS mitre saw:http://www.evolutionpowertools.com/uk/build/mitresaws/r210cmsYou can support me and become a patron:patreon.com/wwbFollow me on Social Media:facebook.com/woodworkingbarcelonainstagram.com/woodworkingbarcelonaMusic by Joakim Karud http://soundcloud.com/joakimkarud
How to make carved night stand / X-Carve Woodworking Barcelona 2017-10-12 | This is my first run project with the New X-Carve that Inventables sent to me. In the next weeks I'll share more projectes showing some of the features of this CNC and also a honest review, comparing it with the old version.This night stand made out of OSB and MDF comes very handy to hold my phone without loosing space from our bedroom. Its design keeps this piece of furniture stongly attached to the siderails of our bed. Design of the top piece come from one of the many features of Easel (free 3d carving software from Inventables), such a pattern generator that brings this nice polygon carved surface. Finally I painted the all V groves and the rest of the nightstand in flat paint white to pop up the beatiful top surface of the OSB.More info about X-Carve: inventables.com/technologies/x-carveMore info about Skil 7226 Multi sander:skil.es/skil-7226-ac-lijadora-multifuncional-fox-6in1-f0157226ac.htmlMy mesuring tape:tacklifetools.com/product/product/index/id/32You can support me and become a patron:patreon.com/wwbFollow me on Social Media:facebook.com/woodworkingbarcelonainstagram.com/woodworkingbarcelonaMusic track: "Ticker": youtube.com/audiolibrary/music
How to make Burnishing tool / Burnisher on the cheap Woodworking Barcelona 2017-09-02 | I always believed that burnishing tools are overpriced so I made one for myself for just 3$ metal HSS steel rod and some scrap wood. The burnisher is an indispensable tool to create the hook on a scraper that will provide a crisp surface on your wood piece. So I encourage you to see the creating process of this homemade tool. Enjoy! Leave your comments and questions. I'll be pleased to answer all of them.You can support me and become a patron:patreon.com/wwbFollow me on Social Media:facebook.com/woodworkingbarcelonainstagram.com/woodworkingbarcelonaMusic by Joakim Karud http://soundcloud.com/joakimkarud
How to make Card Scraper with metal etching Woodworking Barcelona 2017-08-21 | In this video I'll show how to make a gooseneck scraper from an old hand saw. I'm also explaining an effective method to etch metal by adding my logo into the scraper. A gooseneck scraper are used on contourd surfaces to obtain a crisp result avoiding you sanding. If you are interested in how I made the DIY burnisher (essential to sharpen a scraper) let me know in the comments.You can support me and become a patron:patreon.com/wwbFollow me on Social Media:facebook.com/woodworkingbarcelonainstagram.com/woodworkingbarcelonaVisit http://www.skileurope.com to obtain more info about the Skil 1215 AA belt sander shown on this video.Music by Joakim Karud http://soundcloud.com/joakimkarud
How to make ULTRA thin floating night stands Woodworking Barcelona 2017-05-05 | I've made a pair of floating nightstands from an IKEA bamboo cutting boards. I was intended to achieve a minimalist shelve, without legs, lightweight. This is a really easy weekend project that you can do with a table saw and a router. I'm aware this is not able to hold lots of weigh but it's perfecty functional to hold about 2kg without flexing. I hope you like it. If you do, like and share.At the end of this video you will find the Handcarved Spoon Giveaway results.You can support me and become a patron:patreon.com/wwbFollow me on Social Media:facebook.com/woodworkingbarcelonainstagram.com/woodworkingbarcelonaMusic by Joakim Karud http://soundcloud.com/joakimkarud
Make a carving gouge with a broken drill bit Woodworking Barcelona 2017-03-22 | This is my interpretation on how to upcycle a broken spade bit, turning it into a palm carving gouge.Disclaimer: I'm not a metal or woodworker expert, just an amateur experimenting and sharing my work. I hope this helps you into your knowledge process in this matter.If you're interested in get the handcarved spoon I'm going to giveaway, check the details at the end of the video. Results will be posted the 6th of April on my Instagram page.You can support me and become a patron:patreon.com/wwbFollow me on Social Media:facebook.com/woodworkingbarcelonainstagram.com/woodworkingbarcelonaMusic by Joakim Karud http://soundcloud.com/joakimkarud
How to make a wood ruler / Laser engraver Woodworking Barcelona 2016-11-23 | A5 laser at lower price: goo.gl/ItuQL0Other coupons you might be interested in: goo.gl/yL6b4ZMusic by Argofox. Song called "Sir Ghostington" Check out his channel here: goo.gl/zS8IiW
How to make a Leather Strop | Razor sharp knife Woodworking Barcelona 2016-10-07 | Are you interested in achieve a perfect sharpening on your knives or cutting tools? I'll show how to make a DIY 2 faces leather strop or razor strop with a handle for stropping. I'm doing this with handtools, so it's an easy project that everyone can do. Just follow the steps I show on the video and enjoy your scary sharp knife.I recordered this project with the lighting provided by one Thrunite TN4A flashlight. Product link: goo.gl/kp4kn7Coupon Code: THRUNITE, 5% OFF in Official Website.Coupon Code: VIP, For over $300 purchasing, you got 10% OFF in Official Website.I also announced a GIVEAWAY of two Ti3 flashlights. Check the giveaway terms at the end of my video.GIVEAWAY WINNERS: - HISOKA2012 - PAOSON WOODWORKINGWinners should contact me privately to give their post adresses.If you like this video please like, comment and subscribe to my channel. Also follow me on social media like Instagram or Facebook.Music by PlutoTracks, "Deep Inspiring Chillout Instrumental (Rap Hiphop Beat)"soundcloud.com/plutotracks/deep-inspiring-chillout-instrumental-rap-hiphop-beat
Make Modern Table Night Stand - How to Part 3/3 Woodworking Barcelona 2016-09-03 | I'm glad to present you my first furniture project of my YouTube channel. I made a pair of bedside tables for my brothers in law. My intention was to achieve a scandiavian style with a conic tilted legs without having to purchase specific hardware. Another particularity was about the inside of the box. My brother in law wanted a folding front and my sister in law wanted a drawer. So externally both looks the same, not on the inside. Besides, my brother in law asked me to add a mobile charging slot on the top of the table top. I use my CNC to achieve that being concious that I could achieved same results with my router. I used MDF and Beech wood for this project (plus some cheap hardware like bolts, threads, hinges and slides). I hope you enjoy this as much as I did crafting these night stands.If you enjoy this video I encourage you to subscribe to my channel.Also don't forget to check out:PART 1: youtu.be/RfHq4dly0t0PART 2: youtu.be/uBjRsLoDieUFollow me on Social Media:facebook.com/woodworkingbarcelonainstagram.com/woodworkingbarcelona
Make Modern Table Night Stand - How to Part 2/3 Woodworking Barcelona 2016-08-12 | I'm glad to present you my first furniture project of my YouTube channel. I made a pair of bedside tables for my brothers in law. My intention was to achieve a scandiavian style with a conic tilted legs without having to purchase specific hardware. Another particularity was about the inside of the box. My brother in law wanted a folding front and my sister in law wanted a drawer. So externally both looks the same, not on the inside. Besides, my brother in law asked me to add a mobile charging slot on the top of the table top. I use my CNC to achieve that being concious that I could achieved same results with my router. I used MDF and Beech wood for this project (plus some cheap hardware like bolts, threads, hinges and slides). I hope you enjoy this as much as I did crafting these night stands.Also don't forget to check out:PART 1: youtu.be/RfHq4dly0t0PART 3: youtu.be/sqGcXBB-u4oFollow me on Social Media:facebook.com/woodworkingbarcelonainstagram.com/woodworkingbarcelona
Make Modern Table Night Stand - How to Part 1/3 Woodworking Barcelona 2016-07-07 | PART 2: youtu.be/uBjRsLoDieUPART 3: youtu.be/sqGcXBB-u4oFollow me on Social Media:facebook.com/woodworkingbarcelonainstagram.com/woodworkingbarcelonaI'm glad to present you my first furniture project of my YouTube channel. I made a pair of bedside tables for my brothers in law. My intention was to achieve a scandiavian style with a conic tilted legs without having to purchase specific hardware. Another particularity was about the inside of the box. My brother in law wanted a folding front and my sister in law wanted a drawer. So externally both looks the same, not on the inside. Besides, my brother in law asked me to add a mobile charging slot on the top of the table top. I use my CNC to achieve that being concious that I could achieved same results with my router. I used MDF and Beech wood for this project (plus some cheap hardware like bolts, threads, hinges and slides). I hope you enjoy this as much as I did crafting these night stands.
Door Hangers Giveaway Results Woodworking Barcelona 2016-06-27 | Congratulations to the winners!!I decided to giveaway the two door hangers only by the people who followed the instructions. By the time I start the draw only 33 people had left a comment telling why the could want one of my door hangers. That's a quite good odds (be awared for the next time I make a giveaway!). The winners have to contacte me by private message to provide an adress to ship the package.
How to Make Door Hangers + Giveaway Woodworking Barcelona 2016-06-04 | Here I'm going to show you how I make a simple plywood door hangers for our wood shop using a CNC (x-carve). Of course, there's many other ways to achieve similar results without using a CNC. Just doing this for fun! Enjoy it!GIVEAWAY RESULTCheck out if you won: youtu.be/hOB8uQeWttIGIVEAWAY RULES1.- I’ll giveaway two of the three door hangers (I’ll keep one).2.- Door hangers will be sent for free to the winners (worldwide).3.- I'll giveaway one through YouTube and the other through Instagram. 3.1- YouTube: leave a comment on the video telling why you want it. 3.2- Instagram: repost the giveaway announcement picture on your profile. 3.3- You can participate for both, but the same user can’t win both.4.- Results will be published on my Instragram and Facebook page the 18th of June. 5.- The winners need to contact me to provide their addresses.5.- That’s all!! Good luck!!Social Media:facebook.com/woodworkingbarcelonainstagram.com/woodworkingbarcelonaMy CNC machine (X-Carve) was provided by Inventables. inventables.com
How to make a Bedroom Headboard | Quick and Easy project Woodworking Barcelona 2016-05-09 | After some while “out of the business” due lack of time, I’ve found some time to make an order from my wife; a simple headboard for our bedroom. She wanted to involve wood and fabric, to let the design change as easy as by changing the fabric. So I came with this simple design. This is not the kind of woodworking project I’m use to but I guess some people could get interested. At least I hope you enjoy the video. Let me know what you think about it; even if you didn’t like it. Regards!
10000 Subscribers Woodworking Barcelona 2016-01-14 | This simple video is to show my gratefulness to all the people who joined to my youtube channel for the last 18 months. I hope you enjoy it. I truly appreciate your support.
How to Make a Stamp with a CNC | + Woodturning Woodworking Barcelona 2015-12-14 | After spending some time using the x-carve it's time to share some of it's applications. This time I use it to carve on linoleum to achieve a 1 inch stamp with my workshop logo. I've turned the handle using my small lathe and a scrap piece of Holm Oak. To finish it I prefer to leave as natural as I can so I only add a protective layer of blended beeswax.If you're interested in CNC applications on woodworking you can suggest me a project to use my X-Carve. I'm expecting to record a video about my thoughts about this machine; let me know if you're interested too.I hope you enjoy this video. Please like, share and comment.inventables.comSocial Media:facebook.com/woodworkingbarcelonainstagram.com/woodworkingbarcelona
How to Make Wooden Rattle Woodworking Barcelona 2015-11-06 | Let's warm up the channel with other easy woodturning project. I'm bring you a wooden rattle inspired by the classic carvers mallet. It's made out of sucupira and sycamore wood and finished with food safe mineral oil and then a blended beeswax with carnauba wax.I hope you enjoy this video. Please, share it to help me spread my work.Regards from Barcelona!
How to Make a walnut and brass pendant | Woodturning Woodworking Barcelona 2015-10-25 | ►Buy this pendant: http://etsy.me/1GGU5rWAfter a 3 month without posting a video, I come back to bring you another jewelry project. This time I decided to try new materials like brass with some interesting applications. As you can see, with some patience you can obtain an interesting piece of hybrid jewelry.If you like this project please like and share. Remember to subscribe to my channel if you want to stay tuned on new projects.
Announcements and Giveaway Woodworking Barcelona 2015-08-03 | Facebook page: http://on.fb.me/1ITHfHFEtsy shop: http://etsy.me/1K0XSvGPatreon page: http://bit.ly/1IevMz9Inventables site: inventables.com
How to Make a Ring on the Lathe | Stone Inlay Woodworking Barcelona 2015-07-12 | This time I bring you another jewelry project. I wanted to share another type of stone inlay using solid wood (boxwood which it's really hard specie) and lapislazzuli (stone).If you are interested in buy a ring like this, please visit: http://etsy.me/1M6683B
How to Make a Pencil Holder Woodworking Barcelona 2015-06-16 | Hi everyone! This time I wanted to start experimenting with concrete and wood. For this project we need some pre-work doing the mold. As you can see, for the outer shape I used a cardboard tube but for the inner one I didn't find one with the needed diameter. So I used the lathe to turn a small piece of soft lumber (yellow pine) to be the inner shape of the mold.As you will see I recommend to shake the concrete before curing to achieve a uniform piece. Otherwise you leave it without doing this to achieve a irregular shape with bubbles (you will find a picture of this in my facebook and instagram as well).Also, you will notice I broke accidentally the concrete piece while I was unmolding it. I can assure you that after repairing it with quick concrete you will obtain a rock solid piece.Finally, I applied clear wood wax in the whole piece to obtain a dust-free and glossy finish.I hope this video inspires you to try new things. Please, like and share my work to help me keep doing this. Thanks.
How to Make a Baseball Bat Woodworking Barcelona 2015-05-07 | Hi everyone! I'm bring you today a project I've made as a gift for a 15 yo cousin. I chose ash, as it's known applications for baseball bat making. I decide to add a burn effect as imitation of those heat treated wood baseball bats. For the finish I applied 3 coats of Tung oil and then a clear wood wax. As weak point of this project, I was limited by 17" long by the lathe dimensions. Anyway, I hope you enjoy this project and the video itself.Feel free to leave any comment or suggestion. Don't forget to subscribe to my channel if you like my projects.
How to Make a wooden cup Woodworking Barcelona 2015-04-30 | ►Buy this cup: http://etsy.me/1U5hnc1I recently bought a chuck for my lathe. The model is a SK100 Clubman from Axminster. I just wanted to start with a simple project to see how it works and get use to it. I'm pretty satisfied with the quality of this accessory. Also I'm pleased with the results as being my first work with a chuck. Talking about materials, I chose small scrap of Ash due its beauty and contrasting grain. For the finish I applied 3 coats of Tung oil because of the protection against water and moisture.I hope you like it.
How to Make a Toy Cat Woodworking Barcelona 2015-03-20 | This project was made entirely by my wife, who hasn’t previous skills on woodworking. She only needed some safety advices.All started few weeks ago when I cheered my wife to make something in my workshop. Then, she came with the idea to craft a toy cat as a present for a volunteer from Animal Welfare Association who looked after a couple which we adopted.She decided to use leftover materials as a symbolic metaphor of the process of adopting an abandoned animal.
How to Make a wall clock Woodworking Barcelona 2015-03-07 | Hi everyone, this week I’m going to show you how I made this wooden clock inspired on a well known football team of my country. A friend of ours asked to make one for her mother. In this project my wife helped me with the design and she came with the idea to combine the wood with the cutting vinyl (she have been working for some years as signwriter and has vast experience working on this material). So after sketching the design, we ordered the vinyl on a local store. I prepared the wooden clock with Bosse Cedar, specie which I’ve never worked before. This time, I decide to flatten, jointing and thicknessing the wood without the router and table saw help. I only used my nº4 and nº7 cheap hand planes. I loved to work this wood due its pleasant smell as you work it. For the wall hanging I decide to use a french cleat system, method which I’ve been using for some time before with satisfactory results. Before applying the vinyl I needed to prepare a uniform and non-porous surface to assure a good binding. After apply a walnut tint to increase the contrast between the wood and the vinyl, I applied 4 coats of spray lacquer, sanding with 500 grit between coats. For the first time, my wife decide to participate on the crafting project, by applying the vinyl. I’m pretty satisfied with the results as well as our friend. I hope you enjoy this project.If you liked it don’t forget to subscribe to my channel. Regards from Barcelona!
How to Make a Pizza Cutter Woodworking Barcelona 2015-02-25 | I ran an open poll on my last video about what my next project should be; around 95% of you chose "pizza cutter", so that's what I chose to work on next.Here I present to you my take on this household utensil. I spent about two weeks thinking about the design, which my wife helped me develop. The result is a simple-shaped, ergonomic, and easy to use tool. Like on some of my past videos, I once again challenged myself, this time in the making of the metal cutter.For this project I used walnut, maple, and 1mm-thick stainless steel. I hope you enjoy it. Please leave me a comment with your thoughts!
