The Meltzone Podcast
Virtual 3D Printed Fibers / What Slicer to use - The Meltzone Podcast Ep5
updated
In this episode, the hosts start with a PSA about backing up data and Stefan's SSD failing. Later, Tom shares his plans for SMRRF and Stefan reveals his intention to be present at both Formnext and SMMRF in 2023. The conversation then shifts towards 3D-printed salmon meat, the Hangprinter project's challenge to the ORNL SkyBAAM patent, and Bambu's new A1 Mini, which might impact the 3D printing industry. They discuss a proposed bill in NY that would require background checks for 3D printer owners due to the perceived risk of creating firearms and the concerning case of 3D Print Generals channel being deleted without notice. Lastly, they talk about the disappearance of @Naomi-Wu from social media after getting into trouble with Chinese authorities.
Drop your questions for upcoming episodes in the comments below or tweet them @TheMeltzone (twitter.com/TheMeltzone).
Subscribe to the main channels:
Thomas Sanladerer: youtube.com/user/ThomasSanladerer?sub_confirmation=1
Stefan (CNC Kitchen): youtube.com/channel/UCiczXOhGpvoQGhOL16EZiTg?sub_confirmation=1
Support us on Patreon:
Tom: patreon.com/toms3dp
Stefan: patreon.com/cnckitchen
MP3 feed http://themelt.zone/feed/mp3/
Find us on iTunes: itunes.apple.com/us/podcast/the-meltzone/id1437741670?mt=2
All info at http://themelt.zone
Intro Jingle by Thomas Herrmann: raise-uav.com
Recoding date: 2023-10-17
### SHOW NOTES ###
Samsung 980 Pro SSD problem: tomshardware.com/news/samsung-980-pro-ssd-failures-firmware-update
SMRRF: sanjaymortimerfoundation.org/smrrf23
Formnext: formnext.mesago.com
3D printed salmon: https://www.salzburg24.at/news/oesterreich/wiener-lachs-ersatzprodukt-aus-3d-drucker-kommt-in-den-supermarkt-145171360
Hangprinter patent challenge: 3dprintingindustry.com/news/hangprinter-inventor-successfully-challenges-ornl-skybaam-patent-attempt-223803
Bambu Lab A1 Mini (affiliate): geni.us/BambuA1Mini
Caribou going out of business: 3druck.com/industrie/caribou3d-webshop-05120359
Prusa Mini Input shaping: github.com/prusa3d/Prusa-Firmware-Buddy/releases
3D Printer Background Check Bill: nysenate.gov/legislation/bills/2023/A8132
3DP General deleted: https://x.com/3DPrintGeneral/status/1712205411489554922?s=20
Naomi Wu going Offline: youtube.com/watch?v=ei7OQDVOYDY
### TIMESTAMPS ###
00:00 Episode 72
03:11 Data gone/SSD fail
12:15 Tom's bike crash
16:52 SMRFF / Formnext 2023
31:50 3D printed salmon
36:12 Peopoly Magneto X
43:38 Tom's Channel Rebrand
51:30 Hangprinter Patent
55:40 Bambu Lab A1 Mini
1:13:10 Caribou B2C shop closing
1:16:25 NYC 3D Printer Background Check Bill
1:25:45 3DP General Deleted
1:33:15 Naomi Wu gone
Drop your questions for upcoming episodes in the comments below or tweet them @TheMeltzone (twitter.com/TheMeltzone).
Subscribe to the main channels:
Thomas Sanladerer: youtube.com/user/ThomasSanladerer?sub_confirmation=1
Stefan (CNC Kitchen): youtube.com/channel/UCiczXOhGpvoQGhOL16EZiTg?sub_confirmation=1
Support us on Patreon:
Tom: patreon.com/toms3dp
Stefan: patreon.com/cnckitchen
MP3 feed http://themelt.zone/feed/mp3/
Find us on iTunes: itunes.apple.com/us/podcast/the-meltzone/id1437741670?mt=2
All info at http://themelt.zone
Intro Jingle by Thomas Herrmann: raise-uav.com
Recording date: 2023/07/24
### SHOW NOTES ###
EVCC Solar Charging: evcc.io
Ankermake M5C: ankermake.com/m5c-is-coming?variant
Ankermake M5 "Review Controversy" (German): 3druck.com/diy/ankermake-m5-3d-drucker-review-24107720
EUFY Controversy (German): https://www.golem.de/news/anker-eufy-kameras-waren-nicht-so-sicher-wie-beworben-2302-171655.html
3D Printed Spaghetti: 3dnatives.com/en/barilla-spaghetto-3d-3d-printed-spaghetti-040720234
Worlds Largest Sand Printer: 3dprint.com/298270/gms-cadillac-celestiq-relies-on-worlds-largest-sand-3d-printer-to-cast-car-parts
BMW S58 Engine: voxelmatters.com/bmw-s58-engine-3d-printed-cylinder
Why is Marlin called Marlin?: 3dprinting.stackexchange.com/questions/9899/where-did-marlin-get-its-name
Why is GRBL called GRBL?: github.com/grbl/grbl/wiki/Frequently-Asked-Questions
### TIMESTAMPS ###
00:00 Episode 71
02:25 OpenSauce
17:52 Tesla Experience
24:56 Solar Charging
29:50 Ankermake M5C
42:10 Prusa Mk4
52:30 Industrial 3D Printing use
01:04:24 Why "Marlin"?
Support Scott and Marlin firmware: marlinfw.org/docs/development/contributing.html#donate
Drop your questions for upcoming episodes in the comments below or tweet them @TheMeltzone (twitter.com/TheMeltzone).
Subscribe to the main channels:
Thomas Sanladerer: youtube.com/user/ThomasSanladerer?sub_confirmation=1
Stefan (CNC Kitchen): youtube.com/channel/UCiczXOhGpvoQGhOL16EZiTg?sub_confirmation=1
Support us on Patreon:
Tom: patreon.com/toms3dp
Stefan: patreon.com/cnckitchen
MP3 feed http://themelt.zone/feed/mp3/
Find us on iTunes: itunes.apple.com/us/podcast/the-meltzone/id1437741670?mt=2
All info at http://themelt.zone
Intro Jingle by Thomas Herrmann: raise-uav.com
### SHOW NOTES ###
Marlin firmware: marlinfw.org
Ulendo: ulendo.io
Rook MK1 3D Printer: printables.com/de/model/387431-rook-mk1-3d-printer
AutoBuild Marlin: marlinfw.org/docs/basics/auto_build_marlin.html
### TIMESTAMPS ###
0:00 Episode 70
On this Podcast episode, Stefan asks Tom about his experience about dubbing his 3D Printing videos with a German audio track and why uploading to a new channel might be a better option. The episode is also well-filled with discussions about intellectual property, both in video and in software form, as rebranding open source projects as your own work is a concerning trend. 3D model sites are now introducing subscription services to combat some of this.
Drop your questions for upcoming episodes in the comments below or tweet them @TheMeltzone (twitter.com/TheMeltzone).
Subscribe to the main channels:
Thomas Sanladerer: youtube.com/user/ThomasSanladerer?sub_confirmation=1
Stefan (CNC Kitchen): youtube.com/channel/UCiczXOhGpvoQGhOL16EZiTg?sub_confirmation=1
Support us on Patreon:
Tom: patreon.com/toms3dp
Stefan: patreon.com/cnckitchen
MP3 feed http://themelt.zone/feed/mp3/
Find us on iTunes: itunes.apple.com/us/podcast/the-meltzone/id1437741670?mt=2
All info at http://themelt.zone
Intro Jingle by Thomas Herrmann: raise-uav.com
Recording date: 2023-06-01
### SHOW NOTES ###
E3D and CHT's patents e3d-online.com/blogs/news/revo-high-flow-intellectual-property
AnycubicSlicer twitter.com/josefprusa/status/1663150337543340032
Tesla referral links:
Stefan https://ts.la/stefan42485
Tom https://ts.la/thomas27305
### TIMESTAMPS ###
0:00 Intro
2:14 Dubbed german Content
11:49 Content getting stolen
19:22 Sponsor Mintion & Beagle Cam v2
21:05 Model subscription services
39:05 Prusa's input shaping controversy
53:25 AnycubicSlicer by Anycubic Research & OpenSource discussion
1:08:39 3DP Events in the EU
1:15:04 Tesla
Drop your questions for upcoming episodes in the comments below or tweet them @TheMeltzone (twitter.com/TheMeltzone).
Subscribe to the main channels:
Thomas Sanladerer: youtube.com/user/ThomasSanladerer?sub_confirmation=1
Stefan (CNC Kitchen): youtube.com/channel/UCiczXOhGpvoQGhOL16EZiTg?sub_confirmation=1
Support us on Patreon:
Tom: patreon.com/toms3dp
Stefan: patreon.com/cnckitchen
MP3 feed http://themelt.zone/feed/mp3/
Find us on iTunes: itunes.apple.com/us/podcast/the-meltzone/id1437741670?mt=2
All info at http://themelt.zone
Intro Jingle by Thomas Herrmann: raise-uav.com
Recording date: 2023/05/02
### SHOW NOTES ###
3D Printed Headphones: shop.vectorfinesse.com
Prusa MK4 (Affiliate): geni.us/PrusaMK4
Revo High Flow Announcement: youtube.com/watch?v=W8KQqWI2tzE
OpenSauce: https://opensauce.live/
Stefan on @WilliamOsman2: youtube.com/watch?v=1VsjAvXkinU
### TIMESTAMPS ###
00:00 Episode 68
01:34 3D Printed Headphones
04:30 RMRRF
25:25 REVO High Flow
28:55 Prusa MK4
46:20 Tesla Experience
1:02:40 William Osman
1:14:30 Disposing of Solar Batteries
Drop your questions for upcoming episodes in the comments below or tweet them @TheMeltzone (twitter.com/TheMeltzone).
Subscribe to the main channels:
Thomas Sanladerer: youtube.com/user/ThomasSanladerer?sub_confirmation=1
Stefan (CNC Kitchen): youtube.com/channel/UCiczXOhGpvoQGhOL16EZiTg?sub_confirmation=1
Support us on Patreon:
Tom: patreon.com/toms3dp
Stefan: patreon.com/cnckitchen
MP3 feed http://themelt.zone/feed/mp3/
Find us on iTunes: itunes.apple.com/us/podcast/the-meltzone/id1437741670?mt=2
All info at http://themelt.zone
Intro Jingle by Thomas Herrmann: raise-uav.com
Recording date: 2023/03/21
### SHOW NOTES ###
Electric Snail Fence: https://elektro-schneckenzaun.de/index.php/de/
Jantec YouTube: youtube.com/@UCIomBR2mkxGIKM6zl0DAQkA
Cocoa Press Chocolate Printer: cocoapress.com
DIY EDM: youtube.com/watch?v=5CeCxkFVCdM
Home Assistant Prusa Link: github.com/home-assistant/core/tree/dev/homeassistant/components/prusalink
Prusament Tungsten (affiliate): prusa3d.com/product/prusament-petg-tungsten-75-1kg/#a_aid=CNCKitchen
Cura Christmas Release: ultimaker.com/learn/cura-christmas-tree-support
### TIMESTAMPS ###
00:00 Episode 67
02:25 Solar Stuff
12:20 Tom does Shorts
19:44 Cocoa Press
22:44 DIY EDM
26:04 FreeCAD
39:00 Home Assistant Prusa Link
44:00 Prusa XL and Tungsten Filament
53:00 Aliexpress is good
59:00 CURA VS PrusaSlicer Organic Supports
Drop your questions for upcoming episodes in the comments below or tweet them @TheMeltzone (twitter.com/TheMeltzone).
Subscribe to the main channels:
Thomas Sanladerer: youtube.com/user/ThomasSanladerer?sub_confirmation=1
Stefan (CNC Kitchen): youtube.com/channel/UCiczXOhGpvoQGhOL16EZiTg?sub_confirmation=1
Support us on Patreon:
Tom: patreon.com/toms3dp
Stefan: patreon.com/cnckitchen
MP3 feed http://themelt.zone/feed/mp3/
Find us on iTunes: itunes.apple.com/us/podcast/the-meltzone/id1437741670?mt=2
All info at http://themelt.zone
Intro Jingle by Thomas Herrmann: raise-uav.com
### SHOW NOTES ###
NVIDIA Insta NERF: developer.nvidia.com/blog/getting-started-with-nvidia-instant-nerfs
Prusa Slicer 2.6: youtube.com/watch?v=ZP2_Asz7xK8
Simplify3D V5: simplify3d.com/simplify3d-releases-version-5-0-with-breakthrough-performance-automation-and-intelligence
Lychee Slicer: twitter.com/LycheeSlicer/status/1595806211651272705
Rock Mountain RepRap Festival: rockymountainreprapfestival.com
San Francisco Maker Faire: youtu.be/-Tn8wfPIIRM
### TIMESTAMPS ###
0:00 Episode 66
13:30 NERF Intro
24:34 Rotary Machining
58:00 New Slicers
1:36:10 Festivals
Drop your questions for upcoming episodes in the comments below or tweet them @TheMeltzone (twitter.com/TheMeltzone).
Subscribe to the main channels:
Thomas Sanladerer: youtube.com/user/ThomasSanladerer?sub_confirmation=1
Stefan (CNC Kitchen): youtube.com/channel/UCiczXOhGpvoQGhOL16EZiTg?sub_confirmation=1
Support us on Patreon:
Tom: patreon.com/toms3dp
Stefan: patreon.com/cnckitchen
MP3 feed http://themelt.zone/feed/mp3/
Find us on iTunes: itunes.apple.com/us/podcast/the-meltzone/id1437741670?mt=2
All info at http://themelt.zone
Intro Jingle by Thomas Herrmann: raise-uav.com
Recording date: 2022-11-21
### SHOW NOTES ###
Corridor Crew - NERF: youtube.com/watch?v=YX5AoaWrowY
Bambulab P1P: youtu.be/JOzAMTbb0Fs
3DPI nuking themselves: twitter.com/joeltelling/status/1593558038455148546?t=TfdQk4IncmKeECwPhnRCFg&s=19
Creality Incident: twitter.com/moorviper/status/1592921116703870978?s=20&t=HS-s7GkBNjouu95EVXzD7g
Espresso Maker - Gaggia New Classic (aff): geni.us/UZ3DN
Espresso Grinder - Eureka Mignon (aff): geni.us/9zUmnB
### TIMESTAMPS ###
00:00 Episode 65
02:00 Solar Battery
17:00 NeRF & AI
35:30 Bambulab P1P
53:20 Ankermake M5
1:00:34 3DPI Awards
1:07:00 Formnext 2022
1:15:00 Creality Laser Incident
1:20:30 Tom's Espresso Setup
1:27:45 Plywood CNC
In this episode, Tom and Stefan talk about the reasons why this Podcast was postponed for so long which covers, ERRF, new/old studio, and taxes. Then they talk about Formnext 2022 that's right around the corner and where to maybe find an affordable room. This leads to a tangent about EVs and fully suspended baby trailers. Next, there is q quick chat about Twitter being bought up by Elon Musk. Tom explains why he changed his review policy and will accept Kickstarter products in the future. After that, they talk about the similarities between coffee brewing and 3D printing and Makerbot's new Sketch Large printer. The questions cover "Gridfinity", criss-cross layers for better part strength, merging channels, and opening a maker space.
Drop your questions for upcoming episodes in the comments below or tweet them @TheMeltzone (twitter.com/TheMeltzone).
Subscribe to the main channels:
Thomas Sanladerer: youtube.com/user/ThomasSanladerer?sub_confirmation=1
Stefan (CNC Kitchen): youtube.com/channel/UCiczXOhGpvoQGhOL16EZiTg?sub_confirmation=1
Support us on Patreon:
Tom: patreon.com/toms3dp
Stefan: patreon.com/cnckitchen
MP3 feed http://themelt.zone/feed/mp3/
Find us on iTunes: itunes.apple.com/us/podcast/the-meltzone/id1437741670?mt=2
All info at http://themelt.zone
Intro Jingle by Thomas Herrmann: raise-uav.com
### SHOW NOTES ###
Full suspension baby trailer: youtube.com/watch?v=jj0CmnxuTaQ
James Hoffmann on YouTube: youtube.com/channel/UCMb0O2CdPBNi-QqPk5T3gsQ
Makerbot Sketch Large: 3dprintingindustry.com/news/ultimaker-launches-new-makerbot-sketch-large-3d-printer-technical-specifications-and-pricing-216130
Gridfinity: youtube.com/watch?v=ra_9zU-mnl8
Clockspring Basement: twitter.com/DreadMakerAdam/status/1585059479019671552?s=20&t=3yJ1umuRQ-8kf119iMNpTA
### TIMESTAMPS ###
0:00 Episode 64
03:05 ERRF
11:05 Formnext 2022 / EV
22:32 Bekonix Sponsorship
22:44 Formnext 2022
33:10 Twitter bought up
39:32 Toms Kickstarter Policy
49:00 Coffee and 3D Printing
1:08:35 Makerbot Sketch Large
1:17:30 Gridfinity
1:21:50 criss-cross layers
1:25:39 Merging Channels
1:28:18 Makerspace
Drop your questions for upcoming episodes in the comments below or tweet them @TheMeltzone (twitter.com/TheMeltzone).
Subscribe to the main channels:
Thomas Sanladerer: youtube.com/user/ThomasSanladerer?sub_confirmation=1
Stefan (CNC Kitchen): youtube.com/channel/UCiczXOhGpvoQGhOL16EZiTg?sub_confirmation=1
Support us on Patreon:
Tom: patreon.com/toms3dp
Stefan: patreon.com/cnckitchen
MP3 feed http://themelt.zone/feed/mp3/
Find us on iTunes: itunes.apple.com/us/podcast/the-meltzone/id1437741670?mt=2
All info at http://themelt.zone
Intro Jingle by Thomas Herrmann: raise-uav.com
Recording date: 2022-09-27
### SHOW NOTES ###
3D printed robot arm: youtube.com/watch?v=e3TNaIyTAnY
Lattice in Fusion360: twitter.com/adskFusion360/status/1563173303162130435?t=i6ra_VDlih-kzlH8I_0TaQ&s=19
Open Source High Temp Printer: github.com/RoyBerntsenDesign/Project-Valkyrie
Gina Häußge bread recipes: food.foosel.net
Pathogens on 3D prints: hackaday.com/2022/09/05/food-safe-3d-printing-a-study
UltiMaker: makerbot.com/stories/news/ultimaker-and-makerbot-announce-closing-of-merger
### TIMESTAMPS ###
00:00 Episode 63
02:44 New Old Studio
18:12 ERRF Preparations
23:16 Dead Chicken
26:40 3D Printed Robot Arm
30:10 Lattice creation in Fusion360
36:50 DIY High Temp Printers
43:05 Bread Time
44:44 Pathogens on 3D Prints
52:40 UltiMaker
57:33 Cherry Picked Review Units
1:05:04 RatRig vs. Voron
1:07:45 Longer Meltzones
1:10:20 LDO vs. Formbot Voron Kit
1:13:05 Alternative Part Cooling
Drop your questions for upcoming episodes in the comments below or tweet them @TheMeltzone (twitter.com/TheMeltzone).
Subscribe to the main channels:
Thomas Sanladerer: youtube.com/user/ThomasSanladerer?sub_confirmation=1
Stefan (CNC Kitchen): youtube.com/channel/UCiczXOhGpvoQGhOL16EZiTg?sub_confirmation=1
Support us on Patreon:
Tom: patreon.com/toms3dp
Stefan: patreon.com/cnckitchen
MP3 feed http://themelt.zone/feed/mp3/
Find us on iTunes: itunes.apple.com/us/podcast/the-meltzone/id1437741670?mt=2
All info at http://themelt.zone
Intro Jingle by Thomas Herrmann: raise-uav.com
Recording date: 08/22/2022
### SHOW NOTES (some links are affiliate links to support the making of this podcast) ###
Corridor Crew got hacked: youtube.com/watch?v=KdELfn1WK0Q
Home Assistant Octoprint Plugin: home-assistant.io/integrations/octoprint
High Endurance SD Card for HA: geni.us/E7TRZ
WiFi Smart Plug: geni.us/hk2f
"Influencer Playbook": twitter.com/joeltelling/status/1561163197121306624?s=20&t=29XfVOdjDQjC9CVUBXAvKA
Positron V3: github.com/KRALYN/PositronV3
### TIMESTAMPS ###
00:00 Episode 62
02:48 Kicked out the Studio
11:18 Corridor Crew got Hacked
19:20 Home Automation and 3D printing
34:00 "Influencer Playbook"
44:50 Sandpaper Grids
47:24 Bambu VS Voron VS Prusa XL
1:01:10 Extrusion Width
1:10:40 Positron V3
In this episode, Stefan talks about what recently put him out of order for almost 4 weeks but how he used the time to discover some amazing new channels. Tom talks about his experience of redeeming his Prusameters and his recent CF lamination projects. Both quickly discuss their most recent videos on obsolete 0.4 mm nozzles and obsolete Volcano hotends. Next, they go through Prusa's recent blog post in which the latest developments regarding the Prusa XL are discussed. Finally, Tom and Stefan talk about their plans with the upcoming ObXidian nozzle and the scam comments they were both victims of.
Drop your questions for upcoming episodes in the comments below or tweet them @TheMeltzone (twitter.com/TheMeltzone).
Subscribe to the main channels:
Thomas Sanladerer: youtube.com/user/ThomasSanladerer?sub_confirmation=1
Stefan (CNC Kitchen): youtube.com/channel/UCiczXOhGpvoQGhOL16EZiTg?sub_confirmation=1
Support us on Patreon:
Tom: patreon.com/toms3dp
Stefan: patreon.com/cnckitchen
MP3 feed http://themelt.zone/feed/mp3/
Find us on iTunes: itunes.apple.com/us/podcast/the-meltzone/id1437741670?mt=2
All info at http://themelt.zone
Intro Jingle by Thomas Herrmann: raise-uav.com
### SHOW NOTES ###
Corridor YouTube: youtube.com/c/Corridor
Prusameters: printables.com/prusameter
Easy Composites YouTube: youtube.com/user/easycompositestv
Prusa XL Update: blog.prusa3d.com/development-update-reworked-nextruder-new-features-and-updated-shipping-information_69967
YouTube Spammer Purge: github.com/ThioJoe/YT-Spammer-Purge
### TIMESTAMPS ###
00:00 Episode 61
02:19 Out of order
17:20 Prusameters
25:09 Sponsor Segment
27:35 CF lamination project
43:30 Obsolete Nozzles and Obsolete Hotends
1:00:30 Prusa XL Update
1:05:46 E3D ObXidian
1:10:00 Stefans Voron 2.4 Update
1:20:00 Comment Scams
This episode starts with a discussion about the longevity of common 3D printing materials and why sometimes filament snaps on its own in the Bowden tube. Next, Tom and Stefan take a look at Formlabs' new FUSE 1+ 3D printer that claims to be able to do wasteless SLS printing, which would be an amazing step forward for that technology! Then there is a quick update on the BambuStudio source code that just was recently released. After that, Tom shares his interest in building a robot arm for filming, and 3D printing using DUET hardware and rambles about the ongoing E3D ObXidian teases that he's fed up with. Then they talk about an STL subscription service and if that's an alternative to buying files separately or by being a Patreon of designers. Finally, they have a talk about new PHA filaments that were just released to the market and claim to be really home-compostable.
Drop your questions for upcoming episodes in the comments below or tweet them @TheMeltzone (twitter.com/TheMeltzone).
Subscribe to the main channels:
Thomas Sanladerer: youtube.com/user/ThomasSanladerer?sub_confirmation=1
Stefan (CNC Kitchen): youtube.com/channel/UCiczXOhGpvoQGhOL16EZiTg?sub_confirmation=1
Support us on Patreon:
Tom: patreon.com/toms3dp
Stefan: patreon.com/cnckitchen
MP3 feed http://themelt.zone/feed/mp3/
Find us on iTunes: itunes.apple.com/us/podcast/the-meltzone/id1437741670?mt=2
All info at http://themelt.zone
Intro Jingle by Thomas Herrmann: raise-uav.com
### SHOW NOTES ###
FUSE 1+: 3dprint.com/292630/formlabs-launches-fuse-1-30w-sls-3d-printer-nylon-carbon-fiber-filled-powder
Bambu Slicer Source: github.com/bambulab/BambuStudio/releases/tag/v1.0.10
Elephant Robotics: elephantrobotics.com
Skyentific YouTube Channel: youtube.com/c/Skyentific/videos
Jeremy Fielding YouTube Channel: youtube.com/c/JeremyFieldingSr
STLflix: stlflix.com
ColorFabb allPHA: colorfabb.com/de/filaments/materials/pha-filaments/allpha
REGEN PHA filament: filaments.ca/collections/regen-pha-filaments
PHA Composting results: linkedin.com/posts/ruudrouleaux_3dprinting-pha-composting-activity-6938012917267095552-XNFE?utm_source=linkedin_share&utm_medium=member_desktop_web
### TIMESTAMPS ###
00:00 Episode 60
02:16 It's HOT!
09:00 Materials failing on their own
23:19 Sponsored Section
26:12 Formlabs FUSE 1+
44:30 Bambu Studio Source Code released
52:45 Robot arms
1:03:58 E3D ObXidian
1:09:05 STLflix
1:26:35 PHA Filaments
This episode is slightly different because Stefan records it straight from Covid isolation which he caught, as many others, at this year's Midwest Reprap Festival in Goshen, IN. After a short status check and some stories from MRRF, Tom and Stefan discuss the recent merger of Ultimaker and Makerbot and what this will mean for the two brands as well as Thingiverse. Staying on the topic of Ultimaker, both talk about CURAs new Arachne slicing engine that dynamically adjusts extrusion width for more detailed and denser parts. Since CURA is open source, Prusa also implemented that feature in their new 2.5 alpha version of Prusa Slicer. Talking about open source, Tom and Stefan discuss the recent issues of Bambulab and QIDI not releasing the source code of their modified PrusaSlicer and CURA builds. The final section covers the question of what happened to PlyBot?
Drop your questions for upcoming episodes in the comments below or tweet them @TheMeltzone (twitter.com/TheMeltzone).
Subscribe to the main channels:
Thomas Sanladerer: youtube.com/user/ThomasSanladerer?sub_confirmation=1
Stefan (CNC Kitchen): youtube.com/channel/UCiczXOhGpvoQGhOL16EZiTg?sub_confirmation=1
Support us on Patreon:
Tom: patreon.com/toms3dp
Stefan: patreon.com/cnckitchen
MP3 feed http://themelt.zone/feed/mp3/
Find us on iTunes: itunes.apple.com/us/podcast/the-meltzone/id1437741670?mt=2
All info at http://themelt.zone
Intro Jingle by Thomas Herrmann: raise-uav.com
### SHOW NOTES ###
Makerbot Ultimaker merger: press.ultimaker.com/makerbot-and-ultimaker-agree-to-merge-to-accelerate-global-adoption-of-additive-manufacturing
Ultimaker 5.0 with Arachne: ultimaker.com/learn/ultimaker-cura-5-0-beta-release-notes
Paper - A Framework for Adaptive Width Control of Dense Contour-Parallel Toolpaths in Fused Deposition Modeling: https://repository.tudelft.nl/islandora/object/uuid%3A202cfa0a-4c59-415d-beba-6bc7d16568b9
PrusaSlicer 2.5 alpha: github.com/prusa3d/PrusaSlicer/releases
BambuSlicer Source Issue: github.com/prusa3d/PrusaSlicer/releases
QIDI Source Issue: twitter.com/a65519528/status/1542786250909724672?s=20&t=3smW24NOMEz40lWbliBpoA
Bambulab Kickstarter: kickstarter.com/projects/bambulab/bambu-lab-x1-corexy-color-3d-printer-with-lidar-and-ai
PlyBot Kickstarter Updates: kickstarter.com/projects/plybot/plybot/posts
### TIMESTAMPS ###
00:00 Episode XX
02:50 Covid & MRRF
20:27 Sponsor Segment
22:20 Ultimaker + Makerbot merger
34:42 Slicing Revolution with CURA Arachne
44:00 BambuSlicer and QIDI Open Source Issues
57:35 PlyBot
This episode starts with a quick update on Tom's new studio as well as the office space Stefan has an eye on. Next, Stefan quickly tells the story of how All3D has been using content from a ton of creators without their permission over the last years and how they want to change their business practice now. BCN3D formally known for their dual-head FDM machines are getting into the market of resin 3D printing but with a real twist, which will allow using higher performance resins and even multi-material printing. Prusa has done a lifecycle analysis of their new recycled materials they are offering and Tom and Stefan talk about "real" recycled 3D printing filaments from the German Start-Ups RecyclingFabrik and QiTech. Then there is an update on the Prusa XL which will stick to regular and open-source nozzles in stark contrast to E3Ds REVO. The last topic covers the just-started Kickstarter of the Anker make M5 and if it might be worth the $759 MSRP. In the question section, Martin asks if Copper would have advantages over a Brass volcano adapter.
Drop your questions for upcoming episodes in the comments below or tweet them @TheMeltzone (twitter.com/TheMeltzone).
Subscribe to the main channels:
Thomas Sanladerer: youtube.com/user/ThomasSanladerer?sub_confirmation=1
Stefan (CNC Kitchen): youtube.com/channel/UCiczXOhGpvoQGhOL16EZiTg?sub_confirmation=1
Support us on Patreon:
Tom: patreon.com/toms3dp
Stefan: patreon.com/cnckitchen
MP3 feed http://themelt.zone/feed/mp3/
Find us on iTunes: itunes.apple.com/us/podcast/the-meltzone/id1437741670?mt=2
All info at http://themelt.zone
Recording date: 2022/04/08
Intro Jingle by Thomas Herrmann: raise-uav.com
### SHOW NOTES ###
All3DP stealing content: twitter.com/Adam_V3D/status/1504122075723747335?t=p8fbkLwHUkCYEcXXMdRE3w&s=19
All3DP response: twitter.com/All3DP/status/1509492997397925896
BCN3D VLM: vlm.bcn3d.com
Prusa Recycled Filament: blog.prusa3d.com/introducing-prusament-petg-recycled-with-calculated-life-cycle-assessment_65806
RecyclingFabrik: recyclingfabrik.com
QiTech: https://www.qitech.de/
Prusa XL will use open-source nozzles: twitter.com/toms3dp/status/1504252567831912452?t=mRhOAU-Sl3OMOBn1WBrF-Q&s=19
Anker Make M5: kickstarter.com/projects/ankermake/ankermake-m5-3d-printer-5x-faster-printing-and-ai-camera
Volcano Adapters: https://cnckitchen.store/Volcano-Adapter-p442912086
### TIMESTAMPS ###
0:00 Episode 58
16:42 Sponsored Section
18:00 All3DP stealing creator content
29:15 BCN3D VLM
40:20 MRRF2022
42:40 Prusa Recycled Filaments
47:50 Real Recycled Filament
1:03:27 Prusa XL Nozzles
1:05:00 Anker Maker M5
1:17:15 Copper VS Brass
Drop your questions for upcoming episodes in the comments below or tweet them @TheMeltzone (twitter.com/TheMeltzone).
Subscribe to the main channels:
Thomas Sanladerer: youtube.com/user/ThomasSanladerer?sub_confirmation=1
Stefan (CNC Kitchen): youtube.com/channel/UCiczXOhGpvoQGhOL16EZiTg?sub_confirmation=1
Support us on Patreon:
Tom: patreon.com/toms3dp
Stefan: patreon.com/cnckitchen
MP3 feed http://themelt.zone/feed/mp3/
Find us on iTunes: itunes.apple.com/us/podcast/the-meltzone/id1437741670?mt=2
All info at http://themelt.zone
Intro Jingle by Thomas Herrmann: raise-uav.com
### SHOW NOTES ###
Formlabs Form 3 Plus review: youtube.com/watch?v=pMrvJRWVvfM
Mekanika CNC review: youtube.com/watch?v=nJAPUVgmCrE
Markforged Precise PLA: markforged.com/de/resources/blog/introducing-precise-pla-the-efficient-material-for-concept-validation
Stefans Makro shots: instagram.com/cnckitchenyt
Buy a Volcano Adapter: https://cnckitchen.store/
3D Printing "Quiz": quinlyvision.com/quiz
Google QuickDraw: quickdraw.withgoogle.com
### TIMESTAMPS ###
00:00 Episode 57
02:47 Toms Dream Studio
13:45 Reviewing Pro-Hardware
28:00 Markforged Review?
33:40 Markforged introduces PLA
41:15 Macro Photography
55:41 Failing Volcano Adapters
1:10:30 Sneaky 3D Printing Quiz feeds AI
1:17:45 Thermistor VS Thermocouple
Drop your questions for upcoming episodes in the comments below or tweet them @TheMeltzone (twitter.com/TheMeltzone).
Subscribe to the main channels:
Thomas Sanladerer: youtube.com/user/ThomasSanladerer?sub_confirmation=1
Stefan (CNC Kitchen): youtube.com/channel/UCiczXOhGpvoQGhOL16EZiTg?sub_confirmation=1
Support us on Patreon:
Tom: patreon.com/toms3dp
Stefan: patreon.com/cnckitchen
MP3 feed http://themelt.zone/feed/mp3/
Find us on iTunes: itunes.apple.com/us/podcast/the-meltzone/id1437741670?mt=2
All info at http://themelt.zone
Intro Jingle by Thomas Herrmann: raise-uav.com
### SHOW NOTES ###
S3D V5 “Confirmed”: fabbaloo.com/news/confirmed-simplify3d-v5-is-on-the-way?utm_source=dlvr.it&utm_medium=twitter&utm_campaign=fabbaloo
Anker 3D printer: ankermake.com
3D printed accessories for Ford: https://www.3dprintingmedia.network/2022-ford-maverick-ford-integrated-tether-system-3d-printable-accessories/
Steamdeck 3D files: https://gitlab.steamos.cloud/SteamDeck/hardware
Snap On Controler Modifications: prusaprinters.org/contest/16-snap-controller-mods
Revo heater cores: 3djake.com/e3d/revo-heatercore-with-spring
### TIMESTAMPS ###
00:00 Episode 56
04:45 Simplify 3D V5 "confirmed"
12:35 Anker Make 3D Printer
20:47 3D printed accessories for FORD Pickup
27:50 Valve Steamdeck CAD files
36:35 E3D REVO problems
47:38 FORM 3 turned out to be a FORM 3+
57:57 The Stepper Drive is Still Alive!
1:08:15 Core XY recommendation
1:18:30 Composting Polymers at home - Additives? Pigments?
Drop your questions for upcoming episodes in the comments below or tweet them @TheMeltzone (twitter.com/TheMeltzone).
Subscribe to the main channels:
Thomas Sanladerer: youtube.com/user/ThomasSanladerer?sub_confirmation=1
Stefan (CNC Kitchen): youtube.com/channel/UCiczXOhGpvoQGhOL16EZiTg?sub_confirmation=1
Support us on Patreon:
Tom: patreon.com/toms3dp
Stefan: patreon.com/cnckitchen
MP3 feed http://themelt.zone/feed/mp3/
Find us on iTunes: itunes.apple.com/us/podcast/the-meltzone/id1437741670?mt=2
All info at http://themelt.zone
Intro Jingle by Thomas Herrmann: raise-uav.com
### SHOW NOTES ###
Using Non-Commercial Models in Videos: twitter.com/toms3dp/status/1483754897443106821
Anet gone? twitter.com/SZhustle/status/1478398033565925376
ERRF 2022: twitter.com/EastRepRapFest/status/1484654555266703362
### TIMESTAMPS ###
00:00 Episode 55
02:02 Is "exposure" enough payment?
17:07 Licensing you own model
22:07 Anet gone?
26:17 ERRF 2022
30:48 Killing a stepper driver?
35:55 German channel?
44:16 Are sponsors good or bad?
58:21 Shaping the inside of a nozzle
59:46 Does PLA bio-degrade in a compost?
JLCPCB also offers affordable yet high-quality PCBs starting at $2 for 5 boards: jlcpcb.com/RHS
This episode starts with a short chat about the festive season and the presents Tom and Stefan got, followed by a talk about open source parametric CAD software and other professional yet affordable options. Next, Stefan shares some experiences running an e-commerce business and what options for selling products online are. After that, they discuss the dangerous practice of smoothing FDM prints by spraying on printing resin. Printed Solid is yet becoming another company that switches to cardboard spools for their filaments and will also be contributing to the Foundation E3D will set up in Sanjay Mortimer's name who recently passed away. Fuslab claims that the recent community-developed Rolling Screw Extruder is infringing on their patent even though prior art was discussed and built years before they filed their patent. Staying on the topic of patents, both shortly talk about a high-flow hotend patent that E3D applied for. The questions cover topics on the compatibility of E3D Revo on the Prusa MK3 as well as converting an old Prusa printer into a CNC router and preheating filament for higher flow rates.
Drop your questions for upcoming episodes in the comments below or tweet them @TheMeltzone (twitter.com/TheMeltzone).
Subscribe to the main channels:
Thomas Sanladerer: youtube.com/user/ThomasSanladerer?sub_confirmation=1
Stefan (CNC Kitchen): youtube.com/channel/UCiczXOhGpvoQGhOL16EZiTg?sub_confirmation=1
Support us on Patreon:
Tom: patreon.com/toms3dp
Stefan: patreon.com/cnckitchen
MP3 feed http://themelt.zone/feed/mp3/
Find us on iTunes: itunes.apple.com/us/podcast/the-meltzone/id1437741670?mt=2
All info at http://themelt.zone
Intro Jingle by Thomas Herrmann: raise-uav.com
### SHOW NOTES ###
Covert Companion: covertinstruments.com/products/covert-companion-fully-loaded
GreenBox: berlingreen.com
Alternative Open Source CAD software (Solvespace): solvespace.com
Spray-on Resin Finish: youtu.be/AuTVnx0Nslc
Printed Solid Cardboard Spools: twitter.com/PrintedSolid/status/1471661784415170564?t=EdmRsGqpDZuNSRzQNRlwZQ&s=19
Rolling Screw Extruder: youtu.be/JCINI5pHP4Y
Takedown discussion: reddit.com/r/3Dprinting/comments/r43ey8/lets_talk_about_the_fuselab_rotary_extruder/hmegpsu
Rolling Screw Extruder Prior Art: groups.google.com/g/3dp-ideas/c/YGFYajwyVrc?pli=1
E3D High Flow Patent Application: register.epo.org/application?number=EP21719221&lng=en&tab=doclist
Wooden CNC Router: youtube.com/watch?v=smIi4zrfatw
### TIMESTAMPS ###
00:00 Episode 54
03:19 Christmas!
19:20 Open Source Parametric CAD
27:22 Sponsor integration
29:18 Professional, yet affordable CAD Options
39:05 Selling Products Online
59:00 Don't spray 3D printing resin!
1:06:25 Cardboard Spools
1:08:30 Sanjay Mortimer Foundation
1:12:00 Rolling Screw Extruder Stopped by Fuselabs
1:22:05 E3D High Flow Patent
1:24:44 E3D REVO on Prusa MK3
1:26:20 Prusa MK2 to CNC
1:31:28 Filament preheating
Recorded on 2021/12/27
Drop your questions for upcoming episodes in the comments below or tweet them @TheMeltzone (twitter.com/TheMeltzone).
Subscribe to the main channels:
Thomas Sanladerer: youtube.com/user/ThomasSanladerer?sub_confirmation=1
Stefan (CNC Kitchen): youtube.com/channel/UCiczXOhGpvoQGhOL16EZiTg?sub_confirmation=1
Support us on Patreon:
Tom: patreon.com/toms3dp
Stefan: patreon.com/cnckitchen
MP3 feed http://themelt.zone/feed/mp3/
Find us on iTunes: itunes.apple.com/us/podcast/the-meltzone/id1437741670?mt=2
All info at http://themelt.zone
Intro Jingle by Thomas Herrmann: raise-uav.com
Recording date: 2021 11 29
### SHOW NOTES ###
CNC Kitchen threaded inserts (Affiliate): geni.us/CNCKitchenInserts
Check out the Prusa XL (Affiliate): prusa3d.com/product/original-prusa-xl-2?a_aid=CNCKitchen
Void free 3D printing: 3dprintingindustry.com/news/bond3d-achieves-99-part-densities-with-void-free-peek-3d-printing-technology-200117
CoPrint, the Creality MMU: youtube.com/watch?v=xVJx01NhjS8
VORON Enraged Rabbit Carrot Feeder (Affiliate): https://s.click.aliexpress.com/e/_A8FrPu
Lamination 3D printing: br-automation.com/en/about-us/press-room/additive-manufacturing-ready-for-industrial-scale-production-16-11-2021
### TIMESTAMPS ###
00:00 Episode 53
02:15 CHT/DIY High Flow Nozzle
30:48 Stefan kicked from Amazon
40:10 Prusa XL
1:18:10 Void Free Printing
1:22:40 Creality MMU
1:32:52 3D Laminating
1:37:14 Thermal Fuses
1:44:40 Who much we make with this podcast
Drop your questions for upcoming episodes in the comments below or tweet them @TheMeltzone (twitter.com/TheMeltzone).
Subscribe to the main channels:
Thomas Sanladerer: youtube.com/user/ThomasSanladerer?sub_confirmation=1
Stefan (CNC Kitchen): youtube.com/channel/UCiczXOhGpvoQGhOL16EZiTg?sub_confirmation=1
Support us on Patreon:
Tom: patreon.com/toms3dp
Stefan: patreon.com/cnckitchen
MP3 feed http://themelt.zone/feed/mp3/
Find us on iTunes: itunes.apple.com/us/podcast/the-meltzone/id1437741670?mt=2
All info at http://themelt.zone
Intro Jingle by Thomas Herrmann: raise-uav.com
Recorded 11/01/2021
### SHOW NOTES ###
Thingiverse Breach: twitter.com/haveibeenpwned/status/1448592087687983107
have i been pwned?: haveibeenpwned.com
Melted Heater block: twitter.com/repkord/status/1448341422332006400?s=20
Dual Vat Saturn: twitter.com/mattyxb/status/1449188770390200320?s=20
Rotating Vat 3D printer: twitter.com/fire/status/1451808650612203528?t=cnwMrrszmmBUksrBiNF3ug&s=19
### TIMESTAMPS ###
00:00 Episode 52
06:27 Thingiverse Data Breach
15:00 Thingiverse Alternatives
30:15 Molten Prusa Heaterblock
01:01:40 Double Vat Resin Printer
01:14:13 Rotating Vat Resin Printer
Drop your questions for upcoming episodes in the comments below or tweet them @TheMeltzone (twitter.com/TheMeltzone).
Subscribe to the main channels:
Thomas Sanladerer: youtube.com/user/ThomasSanladerer?sub_confirmation=1
Stefan (CNC Kitchen): youtube.com/channel/UCiczXOhGpvoQGhOL16EZiTg?sub_confirmation=1
Support us on Patreon:
Tom: patreon.com/toms3dp
Stefan: patreon.com/cnckitchen
Sponsor an Episode?
Send an eMail to sponsors@toms3d.org
MP3 feed http://themelt.zone/feed/mp3/
Find us on iTunes: itunes.apple.com/us/podcast/the-meltzone/id1437741670?mt=2
All info at http://themelt.zone
Intro Jingle by Thomas Herrmann: raise-uav.com
### SHOW NOTES ###
Stefans/CNC Kitchen Threaded Inserts (EU only, Affiliate): geni.us/CNCKitchenInserts
S800 FPV wing (affiliate): hobbyking.com/de_de/s800-sky-shadow-s-kit.html?affiliate_code=RZENWXRZJNBIWVR
E3D Revo: e3d-online.com/blogs/news/rapidchangerevo
Prusa Professional: blog.prusaprinters.org/the-future-of-manufacturing-by-prusa-research_55993
Thingiverse replacing affiliate links: reddit.com/r/3Dprinting/comments/mxxia7/anyone_else_notice_thingiverse_suddenly
Upside-down 3D printer: youtube.com/watch?v=ZAPaOevoeX0
### TIMESTAMPS ###
00:00 Episode 51
02:42 Back from holiday
16:55 E3D Revo
58:20 CNC Kitchen Threaded Inserts
1:03:20 SL1S Upgrade
1:12:08 Prusa Pro - AFS
1:24:20 3D Printing Expos 2021
1:28:10 Elegoo Mars 3 Slicer Compatibility
1:33:50 Thingiverse Stealing from Creators
1:41:25 90° Re-Routed Hotend
Stefan joins this Podcast from his holiday in South Tyrol. Topics are not only how to properly relax but they also cover a Stop-Motion Benchy animation, an update on the Chitubox lockdown of the Mars 3 firmware, an upside-down 3D printer, and a simple way of multicolor 3D printing. They discuss the question if they should start selling plans for their creations. Questions cover more information around the licensing of the STL to Solid conversion in Fusion360.
Drop your questions for upcoming episodes in the comments below or tweet them @TheMeltzone (twitter.com/TheMeltzone).
Subscribe to the main channels:
Thomas Sanladerer: youtube.com/user/ThomasSanladerer?sub_confirmation=1
Stefan (CNC Kitchen): youtube.com/channel/UCiczXOhGpvoQGhOL16EZiTg?sub_confirmation=1
Support us on Patreon:
Tom: patreon.com/toms3dp
Stefan: patreon.com/cnckitchen
MP3 feed http://themelt.zone/feed/mp3/
Find us on iTunes: itunes.apple.com/us/podcast/the-meltzone/id1437741670?mt=2
All info at http://themelt.zone
Intro Jingle by Thomas Herrmann: raise-uav.com
### SHOW NOTES ###
Benchy Stop-Motion Animation: twitter.com/Partiallyfrozen/status/1427323734277373952?s=20
Chitubox Update from Elegoo: twitter.com/Elegoo_Official/status/1425425357830713346?s=20
Upside-Down 3D printer: youtube.com/watch?v=ZAPaOevoeX0
Ivan Miranda plans store: ivanmiranda.com/collections/all
3D Print Colorizer: github.com/Sakati84/3DPrintColorizer
Teaching Tech video on the Colorizer: youtube.com/watch?v=UnWxbU7Hfro
Pointmaster Software for 3D Scan reconstruction: wenzel-group.com/en/products/pointmaster
### TIMESTAMPS ###
0:00 Episode 50
12:05 Sponsor integration
14:00 Stop-Motion 3DBenchy
18:15 Chitubox Update
32:00 Upside-Down 3D Printer
41:30 Selling plans for machines?
50:00 3D Print Colorizer
1:00:00 Fusion360 STL to Mesh conversion
Get the Audiobook of Project Hail Mary by Andy Weir with a FREE trial (affiliate): geni.us/FUrB
Drop your questions for upcoming episodes in the comments below or tweet them @TheMeltzone (twitter.com/TheMeltzone).
Subscribe to the main channels:
Thomas Sanladerer: youtube.com/user/ThomasSanladerer?sub_confirmation=1
Stefan (CNC Kitchen): youtube.com/channel/UCiczXOhGpvoQGhOL16EZiTg?sub_confirmation=1
Support us on Patreon:
Tom: patreon.com/toms3dp
Stefan: patreon.com/cnckitchen
MP3 feed http://themelt.zone/feed/mp3/
Find us on iTunes: itunes.apple.com/us/podcast/the-meltzone/id1437741670?mt=2
All info at http://themelt.zone
Intro Jingle by Thomas Herrmann: raise-uav.com
### SHOW NOTES ###
Voxellab Aquila 3D Printer (affiliate): geni.us/Aquila
3D printer company malpractices youtube.com/watch?v=BxbhgBZeMXs
3D printing using orange peels: core77.com/posts/109398/Another-Plastic-Reduction-Technique-3D-Printing-Using-Orange-Peels
Polymer from orange peels: https://www.ou.edu/class/che-design/a-design/projects-2005/Polymers%20from%20Oranges-Presentation.pdf
Soldering robot: youtu.be/7pUrcxzmpQs
PLTR V2: tindie.com/products/andrew_sink/pltr-v2-pen-plotter-toolhead
Fusion360 stl to solid: youtube.com/watch?v=tVGtG-UjlYg
Project Hail Mary by Andy Weir (affiliate): geni.us/FUrB
### TIMESTAMPS ###
00:00 Episode 49
02:24 Please, no more Ender-3 clones!
24:00 3D printing using orange peels
39:38 Polymer from orange peels
47:45 Soldering Robot
57:00 PLOTR V2 - Pen Plotter
01:03:40 Fusion360 STL to Solid
1:23:15 Why is there no Über-Material?
This episode covers a ton of recycling topics starting from Stefan's adventures into 3D print recycling over the PETBOT that allows direct recycling of PET bottles, to the number of wasted plastics in filament spools all the way to reinforcing PLA with shredded turbine blades. Tom and Stefan further discuss MRRF that happened the weekend before the recording and ERRF that was canceled. At MRRF Lulzbot presented their new 3D printer model that starts at a quite steep price tag. Then there is some discussion on the recent Chitubox Pro launch where many fear that their MSLA printers might in the future only work if they subscribe to the service (UPDATE: twitter.com/UncleJessy4Real/status/1411765198730448899?s=19). Questions cover what printer or method might be suitable for highly accurate parts.
Drop your questions for upcoming episodes in the comments below or tweet them @TheMeltzone (twitter.com/TheMeltzone).
Subscribe to the main channels:
Thomas Sanladerer: youtube.com/user/ThomasSanladerer?sub_confirmation=1
Stefan (CNC Kitchen): youtube.com/channel/UCiczXOhGpvoQGhOL16EZiTg?sub_confirmation=1
Support us on Patreon:
Tom: patreon.com/toms3dp
Stefan: patreon.com/cnckitchen
MP3 feed http://themelt.zone/feed/mp3/
Find us on iTunes: itunes.apple.com/us/podcast/the-meltzone/id1437741670?mt=2
All info at http://themelt.zone
Intro Jingle by Thomas Herrmann: raise-uav.com
### SHOW NOTES ###
PETBOT: bazar.preciousplastic.com/machines/extruder/extruder-fully-built/petbot
Recycling wind turbine blades: 3dprintingindustry.com/news/engineers-recycle-wind-turbine-waste-into-tough-new-fiber-reinforced-pla-191831
Lulzbot Sidekick: shop.lulzbot.com/sidekick
Chitubox Pro Lauch: twitter.com/UncleJessy4Real/status/1411311019381645312?s=19
Chitubox UPDATE: twitter.com/UncleJessy4Real/status/1411765198730448899?s=19
### TIMESTAMPS ###
00:00 Episode 48
04:38 Recent thunderstorms
10:30 Filament recycling
16:30 Spool recycling
29:37 Sponsor section
35:00 PETBot
42:50 Turbine blade recycling
50:37 MRRF
56:20 Lulzbot Sidekick
01:10:03 Chitubox Pro
01:28:39 Printer accuracy
NOTE: A small correction we need to add: Even though the TMC5160 stepper drivers would be capable of handling 48V supply voltage, the DUET 3 board is only rated up to 32V!
Drop your questions for upcoming episodes in the comments below or tweet them @TheMeltzone (twitter.com/TheMeltzone).
Subscribe to the main channels:
Thomas Sanladerer: youtube.com/user/ThomasSanladerer?sub_confirmation=1
Stefan (CNC Kitchen): youtube.com/channel/UCiczXOhGpvoQGhOL16EZiTg?sub_confirmation=1
Support us on Patreon:
Tom: patreon.com/toms3dp
Stefan: patreon.com/cnckitchen
MP3 feed http://themelt.zone/feed/mp3/
Find us on iTunes: itunes.apple.com/us/podcast/the-meltzone/id1437741670?mt=2
All info at http://themelt.zone
Intro Jingle by Thomas Herrmann: raise-uav.com
### SHOW NOTES ###
Jugend Forscht: Ultrasonic heating of resin: https://www.htwg-konstanz.de/hochschule/magazin/gratulation-an-jugend-forscht-bundessieger/
Torshn Kickstarter suspended: kickstarter.com/projects/torshn/puzzle/description
3D printed bike helmet: kickstarter.com/projects/kavsports/kav-the-bike-helmet-reinvented
Mellow FLY-CDY V2 board with RRF (affiliate): https://s.click.aliexpress.com/e/_ASiCfD
Anker Powerline Cables: geni.us/2XZHI
### TIMESTAMPS ###
00:00 Episode 47
01:37 VORON 2.4, DUET, Stepper motor driver
29:22 Featured in MAKE magazine
34:45 Heating and dispersing resin with ultrasonic
41:33 Torshn Kickstarter suspended
44:04 3D printed helmet
57:04 Watertight 3D prints
01:03:45 Siraya Tech availability
01:05:15 RRF on other boards than DUET
In this episode, Stefan proudly presents the trademark certificate that he registered for his channel name and talks a bit about the process involved in applying for it. Tom discusses his plans on re-branding his channel. The following topics cover procedural G-Code generation and the FullControl GCode Designer. After that, Tom and Stefan briefly talk about a recent controversy surrounding Make Anythings Astrolabicon Design that popped up by another company on Kickstarter. Next, Tom introduces his plans for the VORON 2.4 Live build and talks about 3D printed solid-state batteries. Finally both answer questions on how to test the speed of a 3D printer in a review and what to do with filament leftovers.
Drop your questions for upcoming episodes in the comments below or tweet them @TheMeltzone (twitter.com/TheMeltzone).
Subscribe to the main channels:
Thomas Sanladerer: youtube.com/user/ThomasSanladerer?sub_confirmation=1
Stefan (CNC Kitchen): youtube.com/channel/UCiczXOhGpvoQGhOL16EZiTg?sub_confirmation=1
Support us on Patreon:
Tom: patreon.com/toms3dp
Stefan: patreon.com/cnckitchen
MP3 feed http://themelt.zone/feed/mp3/
Find us on iTunes: itunes.apple.com/us/podcast/the-meltzone/id1437741670?mt=2
All info at http://themelt.zone
Intro Jingle by Thomas Herrmann: raise-uav.com
### SHOW NOTES ###
Procedural, parametric pattern generation: youtube.com/watch?v=gfMyGad1Gmc
FullControl GCode Designer: https://t.co/OdDRrUoadn?amp=1
Kickstarter with design “inspired” by Make Anything’s Astrolabicon: youtube.com/watch?v=ly02Lve1K0s
VORON 2.4 Formbot kit (Affiliate): geni.us/VORON24
3D printed solid-state battery (GER): elektroauto-news.net/2021/sakuu-feststoff-akkus-aus-3d-drucker
Heliox video on filament welding: youtube.com/watch?v=UIEp6-mnMGc
Simple Filament Welder (Affiliate): geni.us/8iaZ1AO
Mosaic Palette 3: mosaicmfg.com/products/palette-3-pro
### TIMESTAMPS ###
00:00 Episode 46
02:14 CNC Kitchen®
23:00 Siraya Tech Promo
26:00 YouTube monetization
30:50 Procedural GCode generation
44:30 Make Anything Astrolabicon
55:00 VORON Live build
57:25 What to do with old printers?
01:01:12 3D printed solid-state batteries
01:07:30 How to rate the speed of a printer?
01:16:50 What to do with leftover filament?
Drop your questions for upcoming episodes in the comments below or tweet them @TheMeltzone (twitter.com/TheMeltzone).
Subscribe to the main channels:
Thomas Sanladerer: youtube.com/user/ThomasSanladerer?sub_confirmation=1
Stefan (CNC Kitchen): youtube.com/channel/UCiczXOhGpvoQGhOL16EZiTg?sub_confirmation=1
Support us on Patreon:
Tom: patreon.com/toms3dp
Stefan: patreon.com/cnckitchen
MP3 feed http://themelt.zone/feed/mp3/
Find us on iTunes: itunes.apple.com/us/podcast/the-meltzone/id1437741670?mt=2
All info at http://themelt.zone
Intro Jingle by Thomas Herrmann: raise-uav.com
### SHOW NOTES ###
3D printing simulator: spee3dcraft.com
Dynamic build platform: hackaday.com/2021/04/10/dynamic-build-platforms-for-3d-printers-remove-supports-and-save-material
3D printer/printing production line: 3dprintingindustry.com/news/scientists-convert-low-cost-fdm-3d-printer-into-all-in-one-production-line-called-functgraph-188243
Thermorph: dl.acm.org/doi/10.1145/3173574.3173834
Creality firmware as “own development”: twitter.com/sebazzz91/status/1383855322440163343
Slice engineering vs dragon hotend: twitter.com/xarbit/status/1383721631374184455?s=19
### TIMESTAMPS ###
00:00 Episode 45
09:39 3D Printing Simulator
17:00 Dynamic build platform
27:00 3D printer/printing production line
34:00 Thermorph
39:30 Wren Uni-Wheel crash
47:30 Creality firmware as “own development”
57:00 Slice engineering vs dragon hotend
01:19:40 STEP vs STL
Drop your questions for upcoming episodes in the comments below or tweet them @TheMeltzone (twitter.com/TheMeltzone).
Subscribe to the main channels:
Thomas Sanladerer: youtube.com/user/ThomasSanladerer?sub_confirmation=1
Stefan (CNC Kitchen): youtube.com/channel/UCiczXOhGpvoQGhOL16EZiTg?sub_confirmation=1
Support us on Patreon:
Tom: patreon.com/toms3dp
Stefan: patreon.com/cnckitchen
MP3 feed http://themelt.zone/feed/mp3/
Find us on iTunes: itunes.apple.com/us/podcast/the-meltzone/id1437741670?mt=2
All info at http://themelt.zone
Intro Jingle by Thomas Herrmann: raise-uav.com
### SHOW NOTES ###
Self-driving car platform: pixmoving.com
Lulzbot $750 printer: twitter.com/lulzbot3D/status/1375524595718033408
Heated build chamber patent: 3dprintingindustry.com/news/stratasys-heated-build-chamber-for-3d-printer-patent-us6722872b1-set-to-expire-this-week-185012/?feed_id=482&_unique_id=603631702b554
90° overhangs without support: xyzdims.com/2021/03/03/3d-printing-90-overhangs-without-support-structure-with-non-planar-slicing-on-3-axis-printer/?s=09
### TIMESTAMPS ###
00:00 Episode 44
02:04 New Logo
14:15 Self-driving car platform
31:45 Lulzbot $750 printer
43:10 Heated Chamber Patent
49:58 90° overhangs without support
1:02:10 Why do people think we're geniuses?
1:25:25 Does PLA soften in hot tea water?
Drop your questions for upcoming episodes in the comments below or tweet them @TheMeltzone (twitter.com/TheMeltzone).
Subscribe to the main channels:
Thomas Sanladerer: youtube.com/user/ThomasSanladerer?sub_confirmation=1
Stefan (CNC Kitchen): youtube.com/channel/UCiczXOhGpvoQGhOL16EZiTg?sub_confirmation=1
Support us on Patreon:
Tom: patreon.com/toms3dp
Stefan: patreon.com/cnckitchen
MP3 feed http://themelt.zone/feed/mp3/
Find us on iTunes: itunes.apple.com/us/podcast/the-meltzone/id1437741670?mt=2
All info at http://themelt.zone
Intro Jingle by Thomas Herrmann: raise-uav.com
### SHOW NOTES ###
Stolen content from Chelsy:
twitter.com/ChelsC423/status/1358527762105999361?s=19
twitter.com/ChelsC423/status/1358909591405219840
Stolen video from Angus:
twitter.com/makersmuse/status/1356535075446218755?s=19
French website copying Toms content: myron-3d.com/myron-3d-est-desole-de-son-erreur
"Plastic Free" PLA tea bags: twitter.com/andy_spoo/status/1358843782503030786?s=20
Proper Tea Sieve: https://www.teegschwendner.de/tee-zubehoer/teedauerfilter-gross?c=73
Malware in Creality download: https://www.heise.de/amp/news/Trojaner-Alarm-bei-3D-Drucker-Software-von-Creality-5061290.html?__twitter_impression=true&s=09
3D printed house for sale: 3dprinting.com/construction/first-3d-printed-home-up-for-sale
AdditiveWorks AMPHYON: additive.works
#speedBoatRace: youtube.com/watch?v=7zkKcFtLAks
Try AMAZON Prime (Affiliate): geni.us/8NzOuIz
### TIMESTAMPS ###
00:00 Episode 43
02:25 Stolen Content
41:00 Correction & PLA tea bags
55:50 German Import Tax Change
59:45 Malware in Creality Download
1:13:10 SLA printing PLA and PETG (Or Not)
1:18:00 Thermo-Mechanical Simulation
1:29:02 Speed Benchy Rules
Drop your questions for upcoming episodes in the comments below or tweet them @TheMeltzone (twitter.com/TheMeltzone).
Subscribe to the main channels:
Thomas Sanladerer: youtube.com/user/ThomasSanladerer?sub_confirmation=1
Stefan (CNC Kitchen): youtube.com/channel/UCiczXOhGpvoQGhOL16EZiTg?sub_confirmation=1
Support us on Patreon:
Tom: patreon.com/toms3dp
Stefan: patreon.com/cnckitchen
MP3 feed http://themelt.zone/feed/mp3/
Find us on iTunes: itunes.apple.com/us/podcast/the-meltzone/id1437741670?mt=2
All info at http://themelt.zone
Intro Jingle by Thomas Herrmann: raise-uav.com
### SHOW NOTES ###
VORON project: vorondesign.com
VORON 0 Kit (Affiliate Link): geni.us/VORON0
PlyBot Kickstarter: kickstarter.com/projects/plybot/plybot
Electrochemical 3D Printing: hackaday.com/2021/01/23/low-cost-metal-3d-printing-by-electrochemistry
4th axis for the Prusa: https://www.zhaw.ch/de/engineering/ueber-uns/news/news/event-news/upgrade-fuer-den-3d-drucker-spart-zeit-und-stuetzmaterial
Chelsey's Bernie Model: twitter.com/SirWrender/status/1355683712113889280
Bigtreetech Closed Loop Stepper (Affiliate Link): geni.us/Miv6XaD
### TIMESTAMPS ###
0:00 Episode 42
2:57 Goodbye Tom's hair
5:10 VORON build
18:35 Plybot
34:43 MRRF2021
37:10 Gamestonks
45:26 Formlabs Fuse 1
56:50 Electrochemical Printing
1:01:58 Novel 4D Printing Approach
1:08:45 3D Printed Meat in Germany
1:12:20 Is PLA Eco Friendly?
1:18:46 Bernie Meme
1:21:00 Resin Curing Depth
1:25:24 Closed Loop Steppers
1:31:55 New Podcast Setup
Drop your questions for upcoming episodes in the comments below or tweet them @TheMeltzone (twitter.com/TheMeltzone).
Subscribe to the main channels:
Thomas Sanladerer: youtube.com/user/ThomasSanladerer?sub_confirmation=1
Stefan (CNC Kitchen): youtube.com/channel/UCiczXOhGpvoQGhOL16EZiTg?sub_confirmation=1
Support us on Patreon:
Tom: patreon.com/toms3dp
Stefan: patreon.com/cnckitchen
MP3 feed http://themelt.zone/feed/mp3/
Find us on iTunes: itunes.apple.com/us/podcast/the-meltzone/id1437741670?mt=2
All info at http://themelt.zone
Intro Jingle by Thomas Herrmann: raise-uav.com
### SHOW NOTES ###
Ulendo 2x faster printing: kickstarter.com/projects/s2a/ulendo-better-faster-3d-printing
Klipper input shaping: youtube.com/watch?v=96xWN8bFarA
8 minutes Benchy: youtube.com/watch?v=DDvOVyiH7as
Voron 3D printer: vorondesign.com
XOLOmetry: fabbaloo.com/news/xolo-announces-first-volumetric-3d-printer
Fabcon - rotational printing: youtube.com/watch?v=mYqDzqsjxhQ
3D printing resin science: youtu.be/ht4tbCiFxeM
Volumetric 3D printing: fabbaloo.com/news/new-volumetric-3d-printing-patent-granted
Marsgizmo: youtube.com/channel/UCMgE5ns0gsEvbYiiCwnyaDA
### TIMESTAMPS ###
0:00 Episode 41
2:18 Covid
10:00 Belt Printing
23:00 Ulendo 2x faster printing
35:00 XOLO volumetric 3D printing
44:40 Fluorescence switch SLA printing
57:50 WhamBam Mutant
1:20:20 The "unknown" biggest 3D printing YouTuber
1:34:00 Questions
Drop your questions for upcoming episodes in the comments below or tweet them @TheMeltzone (twitter.com/TheMeltzone).
Subscribe to the main channels:
Thomas Sanladerer: youtube.com/user/ThomasSanladerer?sub_confirmation=1
Stefan (CNC Kitchen): youtube.com/channel/UCiczXOhGpvoQGhOL16EZiTg?sub_confirmation=1
Support us on Patreon:
Tom: patreon.com/toms3dp
Stefan: patreon.com/cnckitchen
MP3 feed http://themelt.zone/feed/mp3/
Find us on iTunes: itunes.apple.com/us/podcast/the-meltzone/id1437741670?mt=2
All info at http://themelt.zone
Intro Jingle by Thomas Herrmann: raise-uav.com
### SHOW NOTES ###
Creality CR-30 on Kickstarter (affiliate): kickstarter.com/projects/3dprintmill/creality-infinite-z-axis-build-volume-printer-3dprintmill?ref=2xjrq8
iFactory One on Kickstarter: kickstarter.com/projects/ifactory3d/ifactory-one-4-in-1-conveyor-belt-printer
### TIMESTAMPS ###
0:00 Episode 40
2:00 Catch-up
17:13 3DP Safety / Cyanide released from Nylon?
32:42 CR-30 and other belt printers
54:12 Software vs. Hardware upgrades
Check out OctoPrint octoprint.org
How to test OctoPrint release candidates community.octoprint.org/t/how-to-use-the-release-channels-to-help-test-release-candidates/402
Drop your questions for upcoming episodes in the comments below or tweet them @TheMeltzone (twitter.com/TheMeltzone).
Subscribe to the main channels:
Thomas Sanladerer: youtube.com/user/ThomasSanladerer?sub_confirmation=1
Stefan (CNC Kitchen): youtube.com/channel/UCiczXOhGpvoQGhOL16EZiTg?sub_confirmation=1
Support us on Patreon:
Tom: patreon.com/toms3dp
Stefan: patreon.com/cnckitchen
MP3 feed http://themelt.zone/feed/mp3/
Find us on iTunes: itunes.apple.com/us/podcast/the-meltzone/id1437741670?mt=2
All info at http://themelt.zone
Intro Jingle by Thomas Herrmann: raise-uav.com
### SHOW NOTES ###
Formext is now an online event: metal-am.com/formnext-2020-to-be-a-virtual-only-event-amid-ongoing-covid-crisis
STEP Export stays in Fusion 360: hackaday.com/2020/09/25/autodesk-blinks-keeps-step-file-export-in-free-version-of-fusion-360
Drop your questions for upcoming episodes in the comments below or tweet them @TheMeltzone (twitter.com/TheMeltzone).
Subscribe to the main channels:
Thomas Sanladerer: youtube.com/user/ThomasSanladerer?sub_confirmation=1
Stefan (CNC Kitchen): youtube.com/channel/UCiczXOhGpvoQGhOL16EZiTg?sub_confirmation=1
Support us on Patreon:
Tom: patreon.com/toms3dp
Stefan: patreon.com/cnckitchen
MP3 feed http://themelt.zone/feed/mp3/
Find us on iTunes: itunes.apple.com/us/podcast/the-meltzone/id1437741670?mt=2
All info at http://themelt.zone
Intro Jingle by Thomas Herrmann: raise-uav.com
### SHOW NOTES ###
Fusion360 removes features from the free license
autodesk.com/products/fusion-360/blog/changes-to-fusion-360-for-personal-use
Batch .step export
github.com/Jnesselr/fusion-360-total-exporter
Non-planar slicing 3dprintingindustry.com/news/researchers-achieve-6-35x-part-strength-increases-with-new-non-planar-fdm-framework-175248
Robot factory belt conversion fabbaloo.com/blog/2020/9/13/robot-factory-offers-continuous-3d-printer-conversion-kit
Sanjay's autoeject youtube.com/c/SanjayMortimer/videos
### TIMESTAMPS ###
0:00 Episode 38
3:21 Stefan's Drone License
13:52 Tom's studio un-move
16:52 Fusion360
47:05 E3D ASMBL
52:46 Non-planar slicer
58:56 Belt printers
1:13:12 BTS
1:22:56 Questions
Drop your questions for upcoming episodes in the comments below or tweet them @TheMeltzone (twitter.com/TheMeltzone).
Subscribe to the main channels:
Thomas Sanladerer: youtube.com/user/ThomasSanladerer?sub_confirmation=1
Stefan (CNC Kitchen): youtube.com/channel/UCiczXOhGpvoQGhOL16EZiTg?sub_confirmation=1
Support us on Patreon:
Tom: patreon.com/toms3dp
Stefan: patreon.com/cnckitchen
MP3 feed http://themelt.zone/feed/mp3/
Find us on iTunes: itunes.apple.com/us/podcast/the-meltzone/id1437741670?mt=2
All info at http://themelt.zone
Intro Jingle by Thomas Herrmann: raise-uav.com
### SHOW NOTES ###
3D printing spray: aesub.com/de/produkte
KFC printing lab meat: mashable.com/article/kfc-3d-printed-chicken-nuggets/?europe=true
Superstrata 3D printed bike: road.cc/content/tech-news/superstrata-first-custom-3d-printed-unibody-carbon-bike-275399
Fully 3D printed motorcycle: twitter.com/BigRep/status/1283007771097669633
3D printed gunpowder: 3dprintingindustry.com/news/scientists-3d-print-gunpowder-substitute-achieve-420m-s-bullet-velocity-173623
Open Hardware Standard (GER): netzpolitik.org/2020/offene-din-norm-fuer-offene-hardware
Free DIN SPEC 3105-1: https://www.beuth.de/de/technische-regel/din-spec-3105-1/324805763
Vision QA algorithm: 3dprintingindustry.com/news/mtus-joshua-pearce-develops-open-source-computer-vision-based-print-correction-algorithm-174295
Spaghetti Detective: thespaghettidetective.com
3D printed house: mightybuildings.com/configurator#/specs
Toms review guidelines: toms3d.org/review-guidelines
Formlabs ceramic resin: formlabs.com/de/blog/ceramic-resin-form-2
### TIMESTAMPS ###
0:00 Episode 037
2:40 Fatherhood
8:10 3D Scanning and 3D scanning spray
16:50 3D printed lab meat by KFC
22:00 3D printed uni-frame bike
31:30 "fully" 3D printed motorcycle
35:00 3D printed gun powder
42:00 Open Hardware Standard
49:00 Open Source Vision-Based Print correction algorithm
57:30 3D printed buildings
1:08:30 Kickstarter rant
1:21:45 Question: 3D printing ceramics & printing services
Can a huge show like Formnext happen in the current pandemic? Apparently the answer is "yes", as TCT Asia has just finished.
Staying with Asia, Creality is reporting record shipments for the month of march - but might be infringing on a patent with their latest model!
Drop your questions for upcoming episodes in the comments below or tweet them @TheMeltzone (twitter.com/TheMeltzone).
Subscribe to the main channels:
Thomas Sanladerer: youtube.com/user/ThomasSanladerer?sub_confirmation=1
Stefan (CNC Kitchen): youtube.com/channel/UCiczXOhGpvoQGhOL16EZiTg?sub_confirmation=1
Support us on Patreon:
Tom: patreon.com/toms3dp
Stefan: patreon.com/cnckitchen
MP3 feed http://themelt.zone/feed/mp3/
Find us on iTunes: itunes.apple.com/us/podcast/the-meltzone/id1437741670?mt=2
All info at http://themelt.zone
Intro Jingle by Thomas Herrmann: raise-uav.com
### SHOW NOTES ###
Printed salmon 3dprintingindustry.com/news/student-start-up-legendary-vish-to-commercialize-vegan-friendly-3d-printed-salmon-173380
Printed steak metro.co.uk/2020/06/30/worlds-first-3d-printed-vegan-steak-hitting-restaurants-soon-12924017
Creality's shipment record creality.com/info/company-news-creality-sells-one-3d-printer-every-8-seconds-mass-production-team-immediately-expanding-by-2-times-i00411i1.html
Potential conflicting patent patents.google.com/patent/EP2891553A1/de?oq=EP2891553
Slicer tuning 3doptimizer.com and cnx-software.com/2020/07/08/3d-printer-retraction-calibration-vol-ii-calibration-generator-program-release
### TIMESTAMPS ###
0:00 Episode 36
2:24 What Stefan & Tom were up to
6:25 PV Solar
17:40 Printed Salmon & Steak
59:54 Print settings auto tuning
31:50 TCT Asia & Formnext Germany
36:17 Creality's shipment record
44:19 Patent conflict
1:17:49 Questions
Drop your questions for upcoming episodes in the comments below or tweet them @TheMeltzone (twitter.com/TheMeltzone).
Subscribe to the main channels:
Thomas Sanladerer: youtube.com/user/ThomasSanladerer?sub_confirmation=1
Stefan (CNC Kitchen): youtube.com/channel/UCiczXOhGpvoQGhOL16EZiTg?sub_confirmation=1
Support us on Patreon:
Tom: patreon.com/toms3dp
Stefan: patreon.com/cnckitchen
MP3 feed http://themelt.zone/feed/mp3/
Find us on iTunes: itunes.apple.com/us/podcast/the-meltzone/id1437741670?mt=2
All info at http://themelt.zone
Intro Jingle by Thomas Herrmann: raise-uav.com
### SHOW NOTES ###
Mini Lathe(affiliate): geni.us/3kJpp
Heliox Stolen YouTube account: twitter.com/Heliox_Lab/status/1256686366110486528?s=20
"Wanna be YouTube Friends" video: youtube.com/watch?v=07aliklZ1Ao
Ultrafast Nozzle Based Printing: 3dprintingindustry.com/news/researchers-create-ultrafast-nozzle-based-3d-printing-technique-171376
Local Pre-Heating: phys.org/news/2020-05-technology-remedy-d-weak.amp
Miele 3D printer accessories: https://m.miele.com/de/com/3d4u-3d-druck-anleitungen-6343.htm
### TIMESTAMPS ###
2:40 - Mini Lathe
11:20 - Prusa Mini/Beginners Series
23:00 - Heliox' Stolen YouTube channel
31:00 - Ultrafast Nozzle based 3D Printing
38:20 - Local Pre-Heating with Carbon NANOTUBES
49:00 - Miele 3D printed kitchen accessories
1:01:00 - 3D printer maintenance
1:24:00 - Adrian Bowyer - Note on Solenoids
1:26:30 - Filament Width Sensor
But Stefan and Tom haven’t been idle, either and have been working on the Toolchanger and on finally getting an old CNC working. All that and more in this episode of The Meltzone Podcast!
Notes and timestamps:
3:50 Getting married in special times
13:42 Tom’s Sienci CNC adventures
21:24 Stefan’s experience with the E3D toolchanger & discussion on the Creality CR-6 SE
e3d-online.com/tc-ms
creality.com/cr-6-se-3d-printer-crowdfunding-on-6th-may-p00296p1.html
33:17 Correction on SeeMeCNC’s efforts of injection molding faceshield frames
twitter.com/SeeMeCNC/status/1244760010514739200?s=19
35:10 Adrian Bowyer’s print ejector concept
3dprintingindustry.com/news/adrian-bowyer-releases-proposal-for-continuous-unattended-3d-printing-system-171135
46:20 Tesla is patching production Model Y with FDM 3D printed parts
insideevs.com/news/410927/tesla-3d-printing-fix-model-y-hvac/amp
fabbaloo.com/blog/2020/4/21/the-very-good-reason-3d-printed-parts-were-found-in-the-tesla-model-y
51:00 FabLab Munich’s open-source metal 3D printer (FabMX)
https://www.heise.de/make/meldung/FabMX-Open-Source-Projekt-will-einen-Metall-3D-Drucker-entwickeln-4700614.html
58:08 US Army’s reinforced 3D printing filament
newatlas.com/multi-polymer-3d-printer-filament
Full paper: █████████████████████████████████████████
1:04:10 Brook Drumm is back on his feet
patreon.com/posts/bankruptcy-new-36365339
1:08:52 PTFE 3D printing by 3M
3m.com/3M/en_US/design-and-specialty-materials-us/3d-printing
2:19:40 Questions
Drop your questions for upcoming episodes in the comments below or tweet them @TheMeltzone (twitter.com/TheMeltzone).
Subscribe to the main channels:
Thomas Sanladerer: youtube.com/user/ThomasSanladerer?sub_confirmation=1
Stefan (CNC Kitchen): youtube.com/channel/UCiczXOhGpvoQGhOL16EZiTg?sub_confirmation=1
Support us on Patreon:
Tom: patreon.com/toms3dp
Stefan: patreon.com/cnckitchen
MP3 feed http://themelt.zone/feed/mp3/
Find us on iTunes: itunes.apple.com/us/podcast/the-meltzone/id1437741670?mt=2
All info at http://themelt.zone
Intro Jingle by Thomas Herrmann: raise-uav.com
### SHOW NOTES ###
We're also talking about printing faceshields and other PPE and how getting organized is really important right now.
Also, Makerbot is supposedly opening up their Method 3D printer to filaments from other manufacturers.
In the questions, we cover filament diameter conversions, building a new printed CNC and Autodesk's patent on non-planar slicing.
Drop your questions for upcoming episodes in the comments below or tweet them @TheMeltzone (twitter.com/TheMeltzone).
Subscribe to the main channels:
Thomas Sanladerer: youtube.com/user/ThomasSanladerer?sub_confirmation=1
Stefan (CNC Kitchen): youtube.com/channel/UCiczXOhGpvoQGhOL16EZiTg?sub_confirmation=1
Support us on Patreon:
Tom: patreon.com/toms3dp
Stefan: patreon.com/cnckitchen
MP3 feed http://themelt.zone/feed/mp3/
Find us on iTunes: itunes.apple.com/us/podcast/the-meltzone/id1437741670?mt=2
All info at http://themelt.zone
Intro Jingle by Thomas Herrmann: raise-uav.com
### SHOW NOTES ###
Smarter Every Day’s video on organizing PPE distribution youtube.com/watch?v=sbEj7M3aZIg
Copper 3D's alleged antimicrobial filament copper3d.com/hackthepandemic
Makerbot's "Open Material System" 3druck.com/3d-druckmaterialien/makerbot-method-extruder-ermoeglicht-materialien-von-drittanbietern-3993009
Tom's video on converting a printer from one diameter to another youtube.com/watch?v=UcMw-3RizIw
Drop your questions for upcoming episodes in the comments below or tweet them @TheMeltzone (twitter.com/TheMeltzone).
Subscribe to the main channels:
Thomas Sanladerer: youtube.com/user/ThomasSanladerer?sub_confirmation=1
Stefan (CNC Kitchen): youtube.com/channel/UCiczXOhGpvoQGhOL16EZiTg?sub_confirmation=1
Support us on Patreon:
Tom: patreon.com/toms3dp
Stefan: patreon.com/cnckitchen
MP3 feed http://themelt.zone/feed/mp3/
Find us on iTunes: itunes.apple.com/us/podcast/the-meltzone/id1437741670?mt=2
All info at http://themelt.zone
Intro Jingle by Thomas Herrmann: raise-uav.com
### SHOW NOTES ###
Power density calculation:
Form2: 250mW laser, 140um spot ⇒ 16.2W/mm² ⇒ ~500mm/s ⇒ 0.005J/mm²
Elegoo Mars: 40W LED & 10% efficiency - 50% polarization (2W) , 120x68mm ⇒ 0.0003W/mm² ⇒ 8s exposure ⇒ 0.002J/mm²
3D printing supplies during corona:
https://www.3dprintingmedia.network/covid-19-3d-printed-valve-for-reanimation-device/
opensourcemask.com/en
Criticism on 3DP equipment
twitter.com/CworthDynamics/status/1241041354718711809
3dprintingcenter.net/2020/03/22/doubts-around-the-copper-3d-n95-mask-naomi-sexy-cyborg-wu-calls-it-a-scam
“Hackathon”
twitter.com/KatzUndTinte/status/1240634913486929922
Prusas efforts: blog.prusaprinters.org/from-design-to-mass-3d-printing-of-medical-shields-in-three-days
In this episode, we talk about Stefan's new Toolchanger, more use cases for LW-PLA and our (back then still relevant) plans for MRRF 2020!
Drop your questions for upcoming episodes in the comments below or tweet them @TheMeltzone (twitter.com/TheMeltzone).
Subscribe to the main channels:
Thomas Sanladerer: youtube.com/user/ThomasSanladerer?sub_confirmation=1
Stefan (CNC Kitchen): youtube.com/channel/UCiczXOhGpvoQGhOL16EZiTg?sub_confirmation=1
Support us on Patreon:
Tom: patreon.com/toms3dp
Stefan: patreon.com/cnckitchen
MP3 feed http://themelt.zone/feed/mp3/
Find us on iTunes: itunes.apple.com/us/podcast/the-meltzone/id1437741670?mt=2
All info at http://themelt.zone
Intro Jingle by Thomas Herrmann: raise-uav.com
### SHOW NOTES ###
Prusa's heatbed analysis help.prusa3d.com/en/article/heatbed-connection-resistance-analysis-mini_114422
PLA resin mentioned
3d-print-works.com/products/pla-pellets-for-3d-printing?ls=en-GB&variant=39897930633
https://reprapworld.de/products/filament/pellets/natureworks_ingeo_4043d_pla_pellets_1_kg/
Drop your questions for upcoming episodes in the comments below or tweet them @TheMeltzone (twitter.com/TheMeltzone).
Subscribe to the main channels:
Thomas Sanladerer: youtube.com/user/ThomasSanladerer?sub_confirmation=1
Stefan (CNC Kitchen): youtube.com/channel/UCiczXOhGpvoQGhOL16EZiTg?sub_confirmation=1
Support us on Patreon:
Tom: patreon.com/toms3dp
Stefan: patreon.com/cnckitchen
MP3 feed: http://themelt.zone/feed/mp3/
Find us on iTunes: itunes.apple.com/us/podcast/the-meltzone/id1437741670?mt=2
All info at http://themelt.zone
Intro Jingle by Thomas Herrmann: raise-uav.com
### SHOW NOTES ###
Pellet extruder: https://mahor.xyz/
Ceramic liner in the IVI hotend: kickstarter.com/projects/ivi3d/ivi-the-closed-loop-3d-printer
Makerbot Classroom Sketch: makerbot.com/3d-printers/sketch-classroom
Lattice scaling law: researchgate.net/profile/Lin_Cheng45/publication/325132246_Design_testing_and_mechanical_behavior_of_additively_manufactured_casing_with_optimized_lattice_structure/links/5c13c5414585157ac1c1a755/Design-testing-and-mechanical-behavior-of-additively-manufactured-casing-with-optimized-lattice-structure.pdf?origin=publication_detail
Precious Plastics: preciousplastic.com
Drop your questions for upcoming episodes in the comments below or tweet them @TheMeltzone (twitter.com/TheMeltzone).
Subscribe to the main channels:
Thomas Sanladerer: youtube.com/user/ThomasSanladerer?sub_confirmation=1
Stefan (CNC Kitchen): youtube.com/channel/UCiczXOhGpvoQGhOL16EZiTg?sub_confirmation=1
Support us on Patreon:
Tom: patreon.com/toms3dp
Stefan: patreon.com/cnckitchen
MP3 feed http://themelt.zone/feed/mp3/
Find us on iTunes: itunes.apple.com/us/podcast/the-meltzone/id1437741670?mt=2
All info at http://themelt.zone
Intro Jingle by Thomas Herrmann: raise-uav.com
### SHOW NOTES ###
Linus thinking about retiring: youtube.com/watch?v=hAsZCTL__lo
Precious Plastic recycling initiative preciousplastic.com
MKS Servo42B http://go.toms3d.org/MKServo42
Drop your questions for upcoming episodes in the comments below or tweet them @TheMeltzone (twitter.com/TheMeltzone).
Subscribe to the main channels:
Thomas Sanladerer: youtube.com/user/ThomasSanladerer?sub_confirmation=1
Stefan (CNC Kitchen): youtube.com/channel/UCiczXOhGpvoQGhOL16EZiTg?sub_confirmation=1
Support us on Patreon:
Tom: patreon.com/toms3dp
Stefan: patreon.com/cnckitchen
MP3 feed http://themelt.zone/feed/mp3/
Find us on iTunes: itunes.apple.com/us/podcast/the-meltzone/id1437741670?mt=2
All info at http://themelt.zone
Intro Jingle by Thomas Herrmann: raise-uav.com
### SHOW NOTES ###
Colorfabb LW-PLA: colorfabb.com/lw-pla-black
Eclipson Airplanes: eclipson-airplanes.com
3DLabPrint Planes: 3dlabprint.com
Hermera Gear Problems: twitter.com/E3DOnline/status/1215328003816873984
Stefan has been working on a surprisingly simple and universal variable infill algorithm while Tom has been trying to combine the advantages of filament and resin printing.
In other new, Marlin 2.0 has finally come out of beta and the E3D "not a Hermes" has started shipping! We talk about our experiences with both of them.
And we also got some good info from you all in the comments from the last episode - there's lots of interest and some corrections on metal 3D printing.
Drop your questions for upcoming episodes in the comments below or tweet them @TheMeltzone (twitter.com/TheMeltzone).
Subscribe to the main channels:
Thomas Sanladerer: youtube.com/user/ThomasSanladerer?sub_confirmation=1
Stefan (CNC Kitchen): youtube.com/channel/UCiczXOhGpvoQGhOL16EZiTg?sub_confirmation=1
Support us on Patreon:
Tom: patreon.com/toms3dp
Stefan: patreon.com/cnckitchen
MP3 feed http://themelt.zone/feed/mp3/
Find us on iTunes: itunes.apple.com/us/podcast/the-meltzone/id1437741670?mt=2
All info at http://themelt.zone
Intro Jingle by Thomas Herrmann: raise-uav.com
### SHOW NOTES ###
Marlin 2.0 github.com/MarlinFirmware/Marlin/releases/tag/2.0.0
E3D Hermes matterhackers.com/store/l/e3d-hemera-dual-drive-extruder-and-hotend/sk/MNTJGY13?rcode=TSAN86
Twitter thread on the Prusa Mini requiring you to break its board to flash custom firmware twitter.com/Cheshireluie/status/1204781838213926912
Buy a Prusa Mini shop.prusa3d.com/en/3d-printers/994-original-prusa-mini.html#a_aid=toms3DP&a_bid=11110002
DIY DED manufacturing (via Erik Cederberg in the comments) twitter.com/Cheshireluie/status/1204781838213926912
Filamentive's announcement on the PLA shortage filamentive.com/important-notice-pla-price-change
Project Air's channel youtube.com/channel/UCPCw5ycqW0fme1BdvNqOxbw
Drop your questions for upcoming episodes in the comments below or tweet them @TheMeltzone (twitter.com/TheMeltzone).
Subscribe to the main channels:
Thomas Sanladerer: youtube.com/user/ThomasSanladerer?sub_confirmation=1
Stefan (CNC Kitchen): youtube.com/channel/UCiczXOhGpvoQGhOL16EZiTg?sub_confirmation=1
Support us on Patreon:
Tom: patreon.com/toms3dp
Stefan: patreon.com/cnckitchen
MP3 feed http://themelt.zone/feed/mp3/
Find us on iTunes: itunes.apple.com/us/podcast/the-meltzone/id1437741670?mt=2
All info at http://themelt.zone
Intro Jingle by Thomas Herrmann: raise-uav.com
### SHOW NOTES ###
Lulzbot: tctmagazine.com/3d-printing-news/aleph-objects-finds-buyer-3d-printing-lulzbot
Generative Design Tutorial: youtube.com/watch?v=PSSt8wswNJQ
Podimo arcticle (DE): http://www.dervierteoffizielle.de/wp/podimo/
3DLabPrint: 3dlabprint.com
Eclipson Planes: eclipson-airplanes.com
Colorfabb LW PLA: colorfabb.com/lw-pla-black
"Bulletproof" 3D prints: gizmodo.com/researchers-3d-printed-plastic-cubes-with-complex-patte-1839858999
Drop your questions for upcoming episodes in the comments below or tweet them @TheMeltzone (twitter.com/TheMeltzone).
Subscribe to the main channels:
Thomas Sanladerer: youtube.com/user/ThomasSanladerer?sub_confirmation=1
Stefan (CNC Kitchen): youtube.com/channel/UCiczXOhGpvoQGhOL16EZiTg?sub_confirmation=1
Support us on Patreon:
Tom: patreon.com/toms3dp
Stefan: patreon.com/cnckitchen
MP3 feed http://themelt.zone/feed/mp3/
Find us on iTunes: itunes.apple.com/us/podcast/the-meltzone/id1437741670?mt=2
All info at http://themelt.zone
Intro Jingle by Thomas Herrmann: raise-uav.com
### SHOW NOTES ###
Speed Benchy livestream twitter.com/F3DPCH/status/1183126246986846208 youtube.com/watch?v=0nJuN0BLNho&feature=youtu.be
Prusa fire photo (possibly a repost, but couldn't find from where). More info on what they found soon™: twitter.com/3DPBelgian/status/1184076263490818049
Fabaloo on "The end of Lulzbot?" fabbaloo.com/blog/2019/10/12/the-end-of-lulzbot
Jay's Two Cents on NordVPN youtube.com/watch?v=CBJZFTy_SAc
Tom Scott on NordVPN youtube.com/watch?v=WVDQEoe6ZWY
Dagoma's claims of preventing gun parts being printed https://www.heise.de/newsticker/meldung/Dagoma-Software-soll-das-3D-Drucken-von-Schusswaffen-verhindern-4560038.html
Fusion360's new terms autodesk.com/products/fusion-360/blog/subscription-types
Prusa's silent heatbed blog.prusaprinters.org/dev-diary-2-how-we-made-the-heatbed-silent
Drop your questions for upcoming episodes in the comments below or tweet them @TheMeltzone (twitter.com/TheMeltzone).
Subscribe to the main channels:
Thomas Sanladerer: youtube.com/user/ThomasSanladerer?sub_confirmation=1
Stefan (CNC Kitchen): youtube.com/channel/UCiczXOhGpvoQGhOL16EZiTg?sub_confirmation=1
Support us on Patreon:
Tom: patreon.com/toms3dp
Stefan: patreon.com/cnckitchen
MP3 feed http://themelt.zone/feed/mp3/
Find us on iTunes: itunes.apple.com/us/podcast/the-meltzone/id1437741670?mt=2
All info at http://themelt.zone
Intro Jingle by Thomas Herrmann: raise-uav.com
Tom Stanton: youtube.com/user/tomstanton282
Ivan Miranda: youtube.com/user/superazote
Drop your questions for upcoming episodes in the comments below or tweet them @TheMeltzone (twitter.com/TheMeltzone).
Subscribe to the main channels:
Thomas Sanladerer: youtube.com/user/ThomasSanladerer?sub_confirmation=1
Stefan (CNC Kitchen): youtube.com/channel/UCiczXOhGpvoQGhOL16EZiTg?sub_confirmation=1
Support us on Patreon:
Tom: patreon.com/toms3dp
Stefan: patreon.com/cnckitchen
MP3 feed http://themelt.zone/feed/mp3/
Find us on iTunes: itunes.apple.com/us/podcast/the-meltzone/id1437741670?mt=2
All info at http://themelt.zone
Intro Jingle by Thomas Herrmann: raise-uav.com
### SHOW NOTES ###
Stefan getting slapped in the face in slowmo: twitter.com/CNC_Kitchen/status/1180073786374344704
PROXXON Lathe (aff): geni.us/18hTB7
Chronos High Speed Camera: krontech.ca


