dutchsinse | 5/06/2024 - Standing Wave - Concentric Wave - Soliton- Solitary Wave of Translation - Earthquakes @dutchsinse | Uploaded May 2024 | Updated October 2024, 3 hours ago.
Been meaning to upload this for a while:
The whole earthquake process shown via laboratory experiments. Using other unrelated experiments not related to earthquakes at all.. .this is what I think is happening....
First part of the video: Concentric standing waves focusing in on themselves into a singularity spike upwards .
I think this is happening below the plates in the Asthenosphere, and hammering in on the under sides of the plates with new deep earthquakes, which hammer UP AND IN with the combined force of thousands of miles of wave being focused into a fine point on the underside of the plates.
Deep earthquake hammering up into the plate, creating a standing wave in the plate boundaries.
2nd part of the video: The standing wave starts to spread up, out and away from where the deep earthquakes are..... a standing wave spreading from the concentric wave hammer points.
The standing wave , as it spreads, drops off equidistant earthquakes of similar magnitudes as the wave spreads through the tank. In nature in the real world, the "tanks" holding the standing wave are the actual plate boundaries and craton edges attached to each boundary.
The standing wave reflects into itself and amplitude (magnitude) grows as the wave reflects into itself.... as the wave reflects back, each "middle point" between each existing wave is filled in with a new wave which comes up between the two previous already existing waves.
I think the new earthquakes are popping up in the same way, we can have two M4's and a new M5 bigger event pop up between the two M4's as the wave which generated the M4's is bouncing back into itself.
I AM NOT TALKING ABOUT ONE EARTHQUAKE CAUSING THE OTHER, this is more like all the earthquakes are caused by the original standing wave which came up.
Part 3 of the video: Shake plate fluid showing the acoustic effect of equal distribution of the wave as it is maintained by additional shaking / vibration
I think mother earth is naturally producing ULF, ELF, and VLF which is additionally vibrating in the plate boundaries which aids and adds to the standing wave equal distribution.
This is likely why the earthquakes are equally distributing out along the plate boundaries and craton edges... why the MOMENTUM OF THE WAVE IS MAINTAINED!!!!!
Part 4 of the video: Additional shake plate experiments but done with bolts hanging above an acoustic vibration . The bolts begin to swing equal and opposite of each other, and a "middle point of silence" or a "cone of silence" forms naturally in the "middle" point above the vibration source.
I think this explains the middle points between earthquakes going silent first in mother nature, and then as the wave shifts, the middle silent point then gets hit with movement (a new earthquake).
Part 5 of the video: shows a solitary wave of translation aka a "soliton" and how it reflects back into itself no matter the distance away from the emitter source!
Simply put, I think the solitary wave is what spreads out first before the standing wave forms.
The first Pulse of a wave that goes out along the plate boundary, hits at the very end or a reflection point and comes back into itself to start the standing wave building process which ultimately leads to the equidistant spaced earthquakes we see pop off along the way as this wave travels from region to region around the planet.
It all starts with the deep earthquakes , concentric waves hammering into the under side of the plate. Those concentric waves MUST be being formed by ELF (low frequency) coming up from the core of the earth vibrating like a giant shake plate / electrical transformer!
Been meaning to upload this for a while:
The whole earthquake process shown via laboratory experiments. Using other unrelated experiments not related to earthquakes at all.. .this is what I think is happening....
First part of the video: Concentric standing waves focusing in on themselves into a singularity spike upwards .
I think this is happening below the plates in the Asthenosphere, and hammering in on the under sides of the plates with new deep earthquakes, which hammer UP AND IN with the combined force of thousands of miles of wave being focused into a fine point on the underside of the plates.
Deep earthquake hammering up into the plate, creating a standing wave in the plate boundaries.
2nd part of the video: The standing wave starts to spread up, out and away from where the deep earthquakes are..... a standing wave spreading from the concentric wave hammer points.
The standing wave , as it spreads, drops off equidistant earthquakes of similar magnitudes as the wave spreads through the tank. In nature in the real world, the "tanks" holding the standing wave are the actual plate boundaries and craton edges attached to each boundary.
The standing wave reflects into itself and amplitude (magnitude) grows as the wave reflects into itself.... as the wave reflects back, each "middle point" between each existing wave is filled in with a new wave which comes up between the two previous already existing waves.
I think the new earthquakes are popping up in the same way, we can have two M4's and a new M5 bigger event pop up between the two M4's as the wave which generated the M4's is bouncing back into itself.
I AM NOT TALKING ABOUT ONE EARTHQUAKE CAUSING THE OTHER, this is more like all the earthquakes are caused by the original standing wave which came up.
Part 3 of the video: Shake plate fluid showing the acoustic effect of equal distribution of the wave as it is maintained by additional shaking / vibration
I think mother earth is naturally producing ULF, ELF, and VLF which is additionally vibrating in the plate boundaries which aids and adds to the standing wave equal distribution.
This is likely why the earthquakes are equally distributing out along the plate boundaries and craton edges... why the MOMENTUM OF THE WAVE IS MAINTAINED!!!!!
Part 4 of the video: Additional shake plate experiments but done with bolts hanging above an acoustic vibration . The bolts begin to swing equal and opposite of each other, and a "middle point of silence" or a "cone of silence" forms naturally in the "middle" point above the vibration source.
I think this explains the middle points between earthquakes going silent first in mother nature, and then as the wave shifts, the middle silent point then gets hit with movement (a new earthquake).
Part 5 of the video: shows a solitary wave of translation aka a "soliton" and how it reflects back into itself no matter the distance away from the emitter source!
Simply put, I think the solitary wave is what spreads out first before the standing wave forms.
The first Pulse of a wave that goes out along the plate boundary, hits at the very end or a reflection point and comes back into itself to start the standing wave building process which ultimately leads to the equidistant spaced earthquakes we see pop off along the way as this wave travels from region to region around the planet.
It all starts with the deep earthquakes , concentric waves hammering into the under side of the plate. Those concentric waves MUST be being formed by ELF (low frequency) coming up from the core of the earth vibrating like a giant shake plate / electrical transformer!
