Uploaded January 2018 | Updated November 2026, 1 hour ago
Quick, easy, inexpensive resin molds from readily available cookie cutters! I got four nice-sized cookie cutters at my local Dollar Tree and wondered how they might perform as molds ... If they worked, I thought, they'd be just $0.25 each! Watch and see how to easily turn them into molds for ornaments, coaster, sun-catchers, and more!! Get tips for finishing off castings made in molds like these or others.
A tutorial on using alcohol inks in resin (like the star piece at the end) is coming up in a week or so! Stay tuned. 😊
To see products I use, love and recommend (and to see acrylic & resin pouring, as well as alcohol ink, products already grouped in one place from various Amazon vendors 😊) :
amazon.com/shop/myriamsnature
If you would like to help me buy supplies for these videos, here is a link: PayPal.me/MyriamsNature
I thank you in advance for wanting to keep this channel going. It means a lot to me.
FOR THIS TEST PAINTING I USED :
▪️ CLEARCAST 7050 resin
— unbeatable price for such a high caliber resin
— 45 minute work time, 8 hours for a touchable cure, 24 hours for full cure
— virtually odor free, VOC free and non-toxic
— cures rock hard and crystal clear
— ✨ ANTI-YELLOWING protection (HALS) & UV absorbers ✨
🛑💰Go direct to the manufacturer like I do :
bit.ly/CC7050 (case sensitive)
Enter coupon code MYRIAM at checkout for 20% off your TOTAL purchase
For their other resins — Epoxy Resin Store : bit.ly/GetResin (case sensitive)
___________________________________
Perfect Pearls mica powders: amzn.to/2xZSeyq and amzn.to/2xZM69u
Martha Stewart Glitter
Super sparkly white mica (larger particle size than Perfect Pearls): goo.gl/Ntgama
For MIXING RESIN in THIS video:
100 of my favorite 30 ml medicine cups: amzn.to/2yYE92E
Ziplock bags are available in just about any size you need... For this small test, I used 1"x2" bags. Typical sizes are also 1.5x1.5", 2x2", 2x3", 3x5". If you need larger quantities, using a cup might be as easy or easier.
This was done using about about 25 ml of resin for the flower and 30 ml for the star.
Thank you in advance for watching the videos, sharing them, commenting and leaving a thumbs up. Your kindness helps my channel continue and it is all greatly appreciated! May the alcohol inks, resin, and paints be kind, and may the pours be with you. 😊💕
Quick, easy, inexpensive resin molds from readily available cookie cutters! I got four nice-sized cookie cutters at my local Dollar Tree and wondered how they might perform as molds ... If they worked, I thought, they'd be just $0.25 each! Watch and see how to easily turn them into molds for ornaments, coaster, sun-catchers, and more!! Get tips for finishing off castings made in molds like these or others.
A tutorial on using alcohol inks in resin (like the star piece at the end) is coming up in a week or so! Stay tuned. 😊
To see products I use, love and recommend (and to see acrylic & resin pouring, as well as alcohol ink, products already grouped in one place from various Amazon vendors 😊) :
amazon.com/shop/myriamsnature
If you would like to help me buy supplies for these videos, here is a link: PayPal.me/MyriamsNature
I thank you in advance for wanting to keep this channel going. It means a lot to me.
FOR THIS TEST PAINTING I USED :
▪️ CLEARCAST 7050 resin
— unbeatable price for such a high caliber resin
— 45 minute work time, 8 hours for a touchable cure, 24 hours for full cure
— virtually odor free, VOC free and non-toxic
— cures rock hard and crystal clear
— ✨ ANTI-YELLOWING protection (HALS) & UV absorbers ✨
🛑💰Go direct to the manufacturer like I do :
bit.ly/CC7050 (case sensitive)
Enter coupon code MYRIAM at checkout for 20% off your TOTAL purchase
For their other resins — Epoxy Resin Store : bit.ly/GetResin (case sensitive)
___________________________________
Perfect Pearls mica powders: amzn.to/2xZSeyq and amzn.to/2xZM69u
Martha Stewart Glitter
Super sparkly white mica (larger particle size than Perfect Pearls): goo.gl/Ntgama
For MIXING RESIN in THIS video:
100 of my favorite 30 ml medicine cups: amzn.to/2yYE92E
Ziplock bags are available in just about any size you need... For this small test, I used 1"x2" bags. Typical sizes are also 1.5x1.5", 2x2", 2x3", 3x5". If you need larger quantities, using a cup might be as easy or easier.
This was done using about about 25 ml of resin for the flower and 30 ml for the star.
Thank you in advance for watching the videos, sharing them, commenting and leaving a thumbs up. Your kindness helps my channel continue and it is all greatly appreciated! May the alcohol inks, resin, and paints be kind, and may the pours be with you. 😊💕
![94] Acrylic Pouring Through a Butterfly Cookie Cutter !
I continue to explore the cookie cutter technique I developed ... this time with a cutter shaped like butterfly. I was excited to see what would happen when we used a shape that is only symmetrical from left to right, but NOT from top to bottom. The results were fun, and oh so interesting! 😊💕
✨🎥 To see my other COOKIE CUTTER POURS, here is a playlist: https://www.youtube.com/playlist?list=PLP0BQBYrWnd_uHOeYJEyFQ45lyEKlxJWY 📹✨
Facebook.com/MyriamsNature Instagram.com/Myriams_Nature
♦️ Facebook group : https://www.facebook.com/groups/Myriams.Fluid.Art.Tribe (for acrylic pouring, alcohol inks, and resin) ♦️
IF YOU WANT TO PARTICIPATE IN MAKING VIDEOS HAPPEN (and/or say “thank you” 😊💕):
🔹 Sponsor this channel with a contribution: https://www.PayPal.me/MyriamsNature
🔶 Or become a monthly patron and earn EXCLUSIVE rewards (like free digital art downloads, access to extra, detailed videos made only for patrons, behind the scenes looks and more!) 😄🎉:
https://www.patreon.com/myriamsnature
I thank you in advance for being a part of the team.
🔹 If you prefer tangibles, this is my Amazon wishlist (some things are realistic, some are a dream 😄): http://www.amazon.com/registry/wishlist/18P8J68XW9RJA
❇️ Convenient Shopping for Acrylic, Resin & Alcohol Ink Art:
https://www.amazon.com/shop/MyriamsNature
Categorized PICTURED LINKS to hundreds of fluid art products! 😊
FOR THIS PIECE I USED :
▪️ DecoArt Americana Paints :
Jack-o’-lantern Orange
Light Buttermilk
Cadmium Yellow
True Ochre
Lamp Black
▪️DecoArt Extreme Sheen 24k Gold : https://amzn.to/2CS6R8g
▪️DecoArt Extreme Sheen Rose Gold : https://amzn.to/2Sc3h2j
[Alternative: DecoArt Americana Sampler - 18 Popular Picks: https://amzn.to/2MFxMb3 (individual bottles are MUCH cheaper in craft stores so I don’t list those)]
▪️DecoArt Pouring Medium : https://amzn.to/2F5jsDV
▪️One ounce (30ml) mixing cups : https://amzn.to/2KN0SUC
▪️Thin 1 oz. squeeze bottles:
— for a pack of 6: https://amzn.to/2qNs517
— for a pack of 12: https://amzn.to/2qLBrKs
▪️Blue nozzle bottles : I order these from eBay... they take a couple of weeks to receive
goo.gl/LMC6Uf
▪️10 inch MDF round board: https://amzn.to/2wWaNlt
————————————————
PAINT MIXING
- I mix my paint 1 part paint to 3 parts pouring medium.
I tend to eyeball amounts because I’ve come to realize that having the same consistency/thickness, for each of your mixed paints, is more important than the ratios of medium to paint.
ALL of my paints (all the pouring colors as well as whatever negative space color I might use) are mixed to the same consistency using the formula above and adding tiny bits of water as, and if, needed.
- When adding water, the goal is to get my paint to the consistency of warm honey. The amount of water will depend on the type of acrylic paint ... Flow acrylic (runny like syrup) will need very little water if any, while medium to heavy body paint (thick like toothpaste) will need more. Try to limit the amount of water that you use ... too much will break down the binding properties of the acrylic paint. How much is too much? Try to keep the amount of water to under 25% of the amount of paint if you can.
———————————————
SEALING
Once my paintings dry, I spray them with a low odor, user-friendly, crystal clear, museum-quality varnish designed for acrylics, oils and watercolors. It gives a glossy finish.
Here is a link: http://amzn.to/2jGh3KO
When I want to spray a matte/satin finish instead, I use this: http://amzn.to/2fvgYF0
This was done on a 10 x 10 inch canvas
Thank you in advance for watching the videos, sharing them, commenting and leaving a thumbs up. Your kindness helps my channel continue and it is all greatly appreciated! May the alcohol inks, resin, and paints be kind, and may the pours be with you. 😊💕 94] Acrylic Pouring Through a Butterfly Cookie Cutter !](https://i.ytimg.com/vi/eEWJ_mATpCQ/mqdefault.jpg)
![[11] Fluid painting : Acrylic pouring a flowering tree
How to use fluid acrylic painting techniques to paint a cherry blossom tree (Sakura), a blue sky, fluffy clouds, and grassy hill.
- - I explain my materials, simple tools, how I mix my paint, and then I show you step-by-step how to use a dirty pour and other paint flow methods to create trees and landscapes of your own. 🌸🌳
🔺 JOIN my FUN, INFORMATIVE Facebook group : https://www.facebook.com/groups/Myriams.Fluid.Art.Tribe (for acrylic pouring, alcohol inks, and resin) 🔺 [11] Fluid painting : Acrylic pouring a flowering tree](https://i.ytimg.com/vi/ebh8Dy-h3Os/mqdefault.jpg)
![125] Alcohol Ink Geode on an Awesome Hardboard Panel - Tutorial - Ampersand Artist Panel
In order to demo a harboard artist panel by Ampersand, I paint a fantasy geode with alcohol ink. I show you the benefits and features of these panels and others in the series.
Overall I loved working on this substrate and will likely use more of these in the future. (This video is part 1 of 2) Make sure to watch part 2 to see how this geode gets embellished and gets a glass-like resin finish.
Part 2 will be listed here when it’s available :
💥 For tips, tricks, ideas, help & more, join my FACEBOOK GROUP: https://www.facebook.com/groups/Myriams.Fluid.Art.Tribe See you there! ✨
EASY WAYS TO TAKE PART IN GETTING VIDEOS MADE :
🔹 Contributing for supplies: https://www.PayPal.me/MyriamsNature
🔸🔸Being a monthly patron (this includes rewards like EXCLUSIVE videos :
https://www.patreon.com/myriamsnature
🔹 Amazon wishlist (some things are realistic, some are a dream 😄): http://www.amazon.com/registry/wishlist/18P8J68XW9RJA
❇️ Convenient Shopping for Acrylic, Resin & Alcohol Ink Art:
https://www.amazon.com/shop/MyriamsNature
Categorized PICTURED LINKS to hundreds of fluid art products! 😊
FOR THIS PROJECT I USED:
▪️Ampersand Artist Panel 9x12” : https://amzn.to/2KWyMuc (other sizes available)
Better selection and prices available here :
▪️Jacquard’s Exciter Pack of 9 Piñata alcohol inks (including the 3 colors I used) : https://amzn.to/2IKeTWn
▪️My favorite Microfine GLITTER : http://bit.ly/ECGlitter ✨
(this link is case sensitive... type it just how I did with the three capital letters if you do it from memory later)
🛑 — Use coupon code MYRIAM for 20% off your entire order! 😁
▪️ Speedball Mona Lisa Adhesive Size : https://amzn.to/2RW9FZ1
▪️ Stickles Glitter Glue (available in dozens of colors) : http://shrsl.com/1oqm0
▪️Kamar Varnish (seals alcohol ink without bleeding, blooming or reactivating the inks) : https://amzn.to/2Evyv9N
▪️99% Isopropyl Alcohol (best price I found) : https://amzn.to/2JalfwK
➖➖ TOOLS and SUPPLIES ➖➖
▪️Set of 4 Waterbrushes (Arteza) : https://amzn.to/2LHqK7M
▪️Dual-temp, insulated heat gun :
https://amzn.to/2PxlHXF
▪️Lower priced crafter’s heat gun (the style I was using in this video) : https://amzn.to/2IIG5EM
▪️1 roll black electrical tape :
https://amzn.to/2VnmLCC
▪️Silicone brush set (great for resin too! )
Set of 6: https://amzn.to/2CxtSxI (shipped immediately by Amazon)
Same set at half the price, but will take a couple of weeks to receive :
https://amzn.to/2HAgbSN
▪️ Silicone mixing cup with spout - 3.3 oz./100 ml (I used for my CLEAR resin): https://amzn.to/2ICl9vl
▪️ SET of THREE of the 3 oz/100ml silicone cups and FIVE of the 10 ml cups (plus other little extras)... shipped by Amazon so arrives quickly : https://amzn.to/2JqzpdI
Thank you in advance for watching the videos, sharing them, commenting and leaving a thumbs up. Your kindness helps my channel continue and it is all greatly appreciated! May the alcohol inks, resin, and paints be kind, and may the pours be with you. 😊💕 125] Alcohol Ink Geode on an Awesome Hardboard Panel - Tutorial - Ampersand Artist Panel](https://i.ytimg.com/vi/f2fInohDA1g/mqdefault.jpg)
![67] Acrylic POURING a 3D Object on FLAT Canvas !! - 4 Flip Cup DIRTY POUR - DecoArt Americana
Part 1 : How to get the look of acrylic pouring 3D stones on a 2D canvas. In this first part we do the 4 flip cup pour. The result is a beautiful pour... and we could stop there, but in part 2 we take it much further! 30 stones and an agate slice further! 😄💕
Make sure to watch part 2 : https://youtu.be/YMGkRwvNywI 😁😊💕
‼️ 💥 For fun, TIPS, tricks, IDEAS, help and ADVICE, join my FACEBOOK GROUP: https://www.facebook.com/groups/Myriams.Fluid.Art.Tribe See you there! ✨‼️
Facebook.com/MyriamsNature Instagram.com/Myriams_Nature
IF YOU WANT TO PARTICIPATE IN MAKING VIDEOS HAPPEN (and/or say “thank you” 😊💕):
🔹Contribute to Myriam’s Nature (and be a sponsor 😄): https://www.PayPal.me/MyriamsNature
I thank you in advance for being a part of this channel’s team.
🔹If you prefer contributing in another way, this is my Amazon wishlist for the channel (some things are realistic, some are just a dream 😄): http://www.amazon.com/registry/wishlist/18P8J68XW9RJA
❇️ Convenient Shopping for Acrylic, Resin & Alcohol Ink Art:
https://www.amazon.com/shop/MyriamsNature
Categorized PICTURED LINKS to hundreds of fluid art products! 😊
FOR THIS PIECE I USED :
▪️ All DecoArt Americana Paints :
Peacock Teal
Lavender
Baby Blue
Sour Apple
True Red
Coral Blush
Sunny Day
Titanium White
▪️DecoArt Americana Sampler - 18 Popular Picks: https://amzn.to/2MFxMb3
▪️DecoArt Pouring Medium : https://amzn.to/2F5jsDV
▪️The blue-tipped squeeze bottle that had my purple paint I order from eBay ... they take a couple of weeks to arrive : goo.gl/LMC6Uf
▪️My favorite silicone is 3 in 1 All Temp Silicone: http://amzn.to/2fyKPwr
The reasons I prefer it are:
- because it dries .... leaves virtually no oily residue once a painting has dried
- has no fumes like the spray silicones
- comes in a super convenient applicator bottle (with a cap that stays attached!)
▪️One ounce (30ml) mixing cups : https://amzn.to/2KN0SUC
————————————————
PAINT MIXING
- I add roughly 1 part paint to 2 (sometimes 3) parts Pouring Medium
(I am comfortable “eyeballing” amounts because I’ve come to realize that having the same consistency/thickness, for each of your mixed paints in a piece, is more important than the ratios of medium to paint. ) ALL of my paints (whatever negative space color I might use and all the pouring colors) are mixed to the same consistency using the formula above and adding tiny bits of water as, and if, needed.
- I then add a tiny amount of water if necessary to get my paint to be the consistency of really warm honey or heavy cream. The amount of water will depend on the type of acrylic paint you used ... Flow acrylic (runny like house paint) will need very little water if any, while medium to heavy body paint (thick like toothpaste) will need more water. Try to limit the amount of water that you use ... too much will break down the binding properties of the acrylic paint. How much is too much? Try to keep the amount of water to under 25% of the amount of paint if you can.
———————————————
SEALING
Once my paintings dry, I spray them with a low odor, user-friendly, crystal clear, museum-quality varnish designed for acrylics, oils and watercolors. It gives a glossy finish.
Here is a link: http://amzn.to/2jGh3KO
When I want to spray a matte/satin finish instead, I use this: http://amzn.to/2fvgYF0
This was done on a 10 x 10 inch canvas.
Thank you in advance for watching the videos, sharing them, commenting and leaving a thumbs up. Your kindness helps my channel continue and it is all greatly appreciated! May the alcohol inks, resin, and paints be kind, and may the pours be with you. 😊💕 67] Acrylic POURING a 3D Object on FLAT Canvas !! - 4 Flip Cup DIRTY POUR - DecoArt Americana](https://i.ytimg.com/vi/fK4gea0la2o/mqdefault.jpg)
![173] Creating TEXTURE 🌀 Two Fun Ways to Add White Alcohol Ink to Resin Petri Coasters and Art
Let’s change how we add white alcohol ink to resin for beautiful petri texture effects. Bonus: no need to worry about white blobs sinking to the bottom!
For fun, tips, tricks, ideas, help & more, join my FACEBOOK GROUP:
https://www.facebook.com/groups/Myriams.Fluid.Art.Tribe
To inquire about purchasing a piece you’ve seen me make, feel free to send me a message via my page:
https://facebook.com/MyriamsNature
EASY WAYS TO TAKE PART IN GETTING VIDEOS MADE :
🔹 Contributing for supplies: https://www.PayPal.me/MyriamsNature
🔸🔸Being a monthly patron (this includes rewards like EXCLUSIVE, extra videos!😄🎉) :
https://www.patreon.com/myriamsnature
🔹 Amazon wishlist : http://www.amazon.com/registry/wishlist/18P8J68XW9RJA
❇️ Convenient Shopping for Alcohol Ink, Resin & Acrylic Art:
https://www.amazon.com/shop/MyriamsNature
Categorized PICTURED LINKS to hundreds of fluid art products! 😊
🎨 MATERIALS USED 🎨
▪️CLEARCAST 7050 resin : http://bit.ly/CC7050 (case sensitive)
— unbeatable price for such a high caliber resin
— 45 minute work time
— virtually odor free, VOC free & non-toxic
— cures rock hard and crystal clear
— ✨ ANTI-YELLOWING protection (HALS) & UV absorbers ✨
🛑 Use coupon code MYRIAM at checkout for 20% off your TOTAL purchase
To see other resins by the same manufacturer, the Epoxy Resin Store : http://bit.ly/GetResin (case sensitive)
◾️KIELTY INKS non-toxic, very low odor... created by a chemist/ microbiologist
▪️ Kielty Inks in the US 🇺🇸
- List of individual colors, and the full set : http://bit.ly/KieltyInks
▪️ Kielty Inks outside the US 🌍
- Complete Set (33 colors and accessories) : https://www.kieltyink.ie/Complete-Kielty-Ink-Set?tracking=5caa7c306bd77
- Individual Inks : https://www.kieltyink.ie/inks/Alcohol-Ink-15ml?tracking=5caa7c306bd77
- 🛑 COUPON Code = Myriam10
once per customer for 10% off your order (from KieltyInk.ie only)
You can also use:
◾️MARABU Alcohol Inks
🔹The SET of all 14 NEW Marabu alcohol ink colors (metallics, glitter and neons): http://bit.ly/Marabu14
🔹The ORIGINAL set of 28 : http://bit.ly/MarabuInk—All28
🔹ALL the colors INDIVIDUALLY (NEW colors at the TOP of the list) : http://bit.ly/MarabuInksNew
◾️JACQUARD PIÑATA Blanco Blanco (White)
- 1/2 ounce (14 ml): http://bit.ly/BlancoBlanco14ml
- 4 ounces (118 ml): http://bit.ly/BlancoBlanco4oz This is a much better deal, it’s like getting 8 small bottles for less than the price of 4
▪️ Blanco Blanco on Amazon: https://amzn.to/2IBLKIn
TOOLS
▪️Set which includes 2 silicone mixing cups, 5 different molds, and more : https://amzn.to/3cohGj6
▪️ 5 Silicone mixing cups with spout - 3.3 oz./100 ml : https://amzn.to/2DdLaDX
▪️One ounce medicine cups... (30ml) mixing cups : https://amzn.to/2KN0SUC
▪️Mini pipettes :
- set of 100 : https://amzn.to/31nuiCm
- set of 200 (better deal) : https://amzn.to/3gu6GTf
▪️Popsicle sticks... the best price for these is at your local dollar store 😊.
Thank you in advance for helping out by watching and sharing these videos! May the alcohol inks, paints and resin be kind, and may the pours be with you. 😊💕 173] Creating TEXTURE 🌀 Two Fun Ways to Add White Alcohol Ink to Resin Petri Coasters and Art](https://i.ytimg.com/vi/fmmW1PC6p3k/mqdefault.jpg)
![31] UNBOXING & Testing an AIRBRUSH kit for Fluid Acrylic painting
Wanting to take blowing/moving paint to a new level, I ordered a simple airbrush. This video shows the unboxing of that kit, the one minute set-up, and trying it out for the first time.
◾️ The Point Zero airbrush seen in this video: http://amzn.to/2ykutQ6 (super easy to operate)
♦️ If you can afford to spend a little more consider this one from Master: https://amzn.to/2LSc2Zu
The Point Zero works nicely... The one drawback is that the motor must be running at all times once turned on so it makes noise continuously. The brush itself has an adjustment which let’s you adjust the trigger (if you ever intend to use this with actual paint and not just for air).
The Master airbrush on the other hand does not have an adjustable trigger but its advantage is that once you turn it on, the motor only runs (and makes noise) when the trigger is pulled on the airbrush.
If you intend to use the airbrush often, for long periods of time, the Master is probably worth the extra money.
Both the Point Zero and the Master are mini-compressors and are roughly identical in size.
To see more products I use, love and recommend for fluid painting (and to possibly discover new products 😊) :
https://www.amazon.com/shop/MyriamsNature
If you would like to help me buy supplies for these videos here is a link: https://www.PayPal.me/MyriamsNature
I thank you in advance for wanting to help keep this channel going. It means a lot to me.😊
For this test I used the following paints:
Liquitex Acrylic Ink - Cerulean Blue Hue
Artists Loft Flow Acrylic White and Black
This is my usual formula for all paint:
- 1 - 2 parts paint to 4 - 5 parts Floetrol (depends on the pigment load of the paint)
- I then add a little water if necessary to get my paint to be the consistency of really warm honey, or like heavy cream. The amount of water will depend on the type of acrylic paint you used ... Flow acrylic (runny like house paint) will need very little water if any, while medium to heavy body paint (thick like toothpaste) will need more water. Try to limit the amount of water that you use ... too much will break down the binding properties of the acrylic paint. How much is too much? Try to keep the amount of water under 50% of the amount of paint.
This test was done on a 4x4 inch ceramic tile.
Thank you in advance for watching the videos, sharing them, commenting and leaving a thumbs up. Your kindness helps my channel continue and it is all greatly appreciated! May the alcohol inks, resin, and paints be kind, and may the pours be with you. 😊💕 31] UNBOXING & Testing an AIRBRUSH kit for Fluid Acrylic painting](https://i.ytimg.com/vi/grHzwcijBuA/mqdefault.jpg)
![117] Painting ALCOHOL INK Jellyfish - Full Spoken Tutorial
Let’s paint abstract alcohol ink jellyfish! I show and explain, step by step, how I made this painting using Kielty Inks, their layering solution (to protect parts of the painting I didn’t want at risk), a couple of Copic markers and a Posca brush marker.
For fun, tips, tricks, ideas, help & more, join my FACEBOOK GROUP:
https://www.facebook.com/groups/Myriams.Fluid.Art.Tribe
https://facebook.com/MyriamsNature
⭐️ Check out my friend Teresa Kovalak’s underwater scene alcohol ink painting : https://www.youtube.com/watch?v 3o6Bw33hvw ⭐️
EASY WAYS TO TAKE PART IN GETTING VIDEOS MADE :
🔹 Contributing for supplies: https://www.PayPal.me/MyriamsNature
🔸🔸Being a monthly patron (this includes rewards like EXCLUSIVE videos!😄🎉) :
https://www.patreon.com/myriamsnature
🔹 Amazon wishlist (some things are realistic, some are a dream 😄): http://www.amazon.com/registry/wishlist/18P8J68XW9RJA
❇️ Convenient Shopping for Acrylic, Resin & Alcohol Ink Art:
https://www.amazon.com/shop/MyriamsNature
Categorized PICTURED LINKS to hundreds of fluid art products! 😊
To see PICTURE LINKS of everything I used in THIS video: https://kit.co/MyriamsNature/my-fave-alcohol-ink-supplies
FOR THIS PIECE I USED...
KIELTY INKS non-toxic and very low odor... created by a chemist /microbiologist
▪️ Kielty in the US 🇺🇸
▪️- List of ALL individual colors, and the full set : http://bit.ly/KieltyInks
▪️- List of ALL solutions : http://bit.ly/KieltySolutions
▪️- Layering Solution :
- 50 ml bottle: http://bit.ly/KieltyLayering50ml
- 500 ml bottle ( about 17 oz., or 1/2 a liter ... ideal for sealing entire pieces before adding resin) : http://bit.ly/KieltyLayering500ml
▪️ Kielty outside the US 🌍
- ▪️- Complete Set (27 colors and accessories) : https://www.kieltyink.ie/Complete-Kielty-Ink-Set?tracking=5caa7c306bd77
- ▪️- Individual Inks : https://www.kieltyink.ie/inks/Alcohol-Ink-15ml?tracking=5caa7c306bd77
- ▪️Layering Solution : https://www.kieltyink.ie/Layering-Solution-50ml?tracking=5caa7c306bd77
- 🛑 COUPON Code = Myriam10
once per customer for 10% off your order from KieltyInk.ie
▪️99% Isopropyl Alcohol : https://amzn.to/2XnsLZt
(Make sure 99% is selected!)
▪️Kirkland 8.5x11” photo paper (150 sheets): https://amzn.to/2JdLl2s
▪️Posca Brush Marker - White : https://amzn.to/2JFpSzM (if you can, buy it at Joann with a coupon 😊)
▪️Copic Markers - V09 and V15
TOOLS
▪️12” Rotating Cake Stand (no lip like a lazy Susan): https://amzn.to/2H0DAva
▪️18” Lazy Susan: https://amzn.to/2LqYBn8
▪️400 microbrushes in 4 sizes: https://amzn.to/2zW2o6l
▪️100 microbrushes:
https://amzn.to/2uSmOHj
▪️Pack of 3 rectangular plastic palettes with 6 wells each : https://amzn.to/2V8oeg9
▪️Pack of 3 round plastic palettes with 10 wells each : https://amzn.to/2VV2C3R
SEALING / VARNISHING
To seal an alcohol ink piece I use a museum quality spray by Krylon: Kamar Varnish. Unlike most spray varnishes and acrylic sprays, it will not react with the alcohol inks.
🔹Here is a link: http://amzn.to/2jGh3KO
AFTER using Kamar, you may choose to add a layer of UV protection to help with possible fading down the line : https://amzn.to/2JisymO
If done on something paper thin like photo paper, Duralar, or Yupo, the piece can be framed under glass or acrylic without being sprayed. Avoid placing alcohol ink work where it will be exposed to direct sunlight however. Though Kielty Inks are less vulnerable, some inks can fade in the sun... eventually.
Thank you in advance for watching the videos, sharing them, commenting and leaving a thumbs up. Your kindness helps my channel continue and it is all greatly appreciated! May the alcohol inks, resin, and paints be kind, and may the pours be with you. 😊💕 117] Painting ALCOHOL INK Jellyfish - Full Spoken Tutorial](https://i.ytimg.com/vi/hGQxJbXaQQ4/mqdefault.jpg)
![[12] Fluid acrylic : CELLS and LACING in a dirty pour with negative space
Step-by-step, detailed view of my fluid acrylic dirty pour full of cells and lacing in white negative space. I explain my paint formula, show you how I mix in my silicone, how I prepare my dirty pour, and how I get cells and lacing.
For this painting I used Artist Loft Flow Acrylic paint from Michaels, and a couple of craft paints from DecoArt and Delta brands... but honestly ANY paint will work. I have a video explaining how I get cells if you need a bit of help with that.
The link for that is: Easy Cells tutorial - https://www.youtube.com/watch?v=HHKSX_PIcdU
The only difference is that I now use a lot more Floetrol than I did in that video. This is my formula:
1-2 parts paint to 5 parts Floetrol (but 2 parts paint to 5 parts Floetrol works well too ... I use more Floetrol now because the paints I use these days are thicker).
I then add a little water if necessary to get my paint to be the consistency of really warm honey, or like heavy cream. The amount of water will depend on the type of acrylic paint you used ... Flow acrylic (runny like house paint) will need very little water if any, while medium to heavy body paint (thick like toothpaste) will need more water. Try to limit the amount of water that you use ... too much will break down the binding properties of the acrylic paint. How much is too much? Try to keep the amount of water under 50% of the amount of paint.
Finally, right before I prepare my dirty pour, I add a few drops (3 to 6 drops) of silicone into each color EXCEPT the white (or whatever negative space color you choose). The fact that the white has no silicone encourages the other colors to bleed into the white and cell up.
I prefer 3 in 1 Silicone (it comes in a yellow and black bottle with a red cap...see the video I linked to above). The reasons I prefer it are:
- because it dries .... leaves virtually no oily residue once a painting has dried
- has no fumes like the spray silicones
- comes in a super convenient applicator bottle (with a cap that stays attached!)
But, any silicone you have will get you cells. [12] Fluid acrylic : CELLS and LACING in a dirty pour with negative space](https://i.ytimg.com/vi/hLLWTsWp9zY/mqdefault.jpg)
![35] DENDRITE FRACTALS : Easy Technique - GREAT Results - Different Styles - Acrylics or India Ink
Step-by-step tutorial for easy, consistent dendrite fractals in varying sizes and styles using a mystery liquid, acrylic inks, India ink, fluid acrylics and regular acrylic paint. See how to create beautiful snowflake - like patterns in any color.
♦️ For frequently asked questions about making fractals, I made a follow-up video : http://youtu.be/u2SgW9n6fV4
https://facebook.com/MyriamsNature
✨Join my Facebook group: https://www.facebook.com/groups/Myriams.Fluid.Art.Tribe
SOME EASY WAYS TO HELP KEEP VIDEOS COMING :
🔹 Contributing for supplies: https://www.PayPal.me/MyriamsNature
🔸🔸Being a monthly patron (this includes rewards like EXCLUSIVE videos!😄🎉) :
https://www.patreon.com/myriamsnature
🔹 Amazon wishlist (some things are realistic, some are a dream 😄): http://www.amazon.com/registry/wishlist/18P8J68XW9RJA
FOR THESE FRACTALS I USED :
▪️— For the white background I used Artist Loft Flow Acrylic White from Michaels as the background... but ANY white acrylic paint seems to work (I tried at least 4 brands too, including Liquitex Basics and DecoArt Americana Titanium White with similar results).
Liquitex Basics Titanium White: https://amzn.to/2TG2gwe
▪️— The colors I used for the fractals :
Liquitex Acrylic Ink - Deep Violet
Golden Fluid Acrylic - Quinacridone Magenta
DecoArt Media Fluid Acrylic - Titanium White (to make colors more pastel ... not for the background)
Dr. Ph. Martins Bombay India Ink - Teal
Liquitex Acrylic Ink set of 3 primaries : https://amzn.to/2UbVa73
Golden Fluid Acrylic set of 10 : https://amzn.to/2HJYjoO
Dr. Ph. Martins Bombay India Ink set of 12 : https://amzn.to/2FuQ1NR
▪️91 % Isopropyl Alcohol
▪️Mystery product ... watch the video to see what it is 😊
My white background paint was mixed using my regular fluid painting mix:
- 1 - 2 parts paint to 4 parts Floetrol
Floetrol : https://amzn.to/2U2wZse
- I then add a little water if necessary to get my paint to be the consistency of really warm honey, or like heavy cream. The amount of water will depend on the type of acrylic paint you used ... Flow acrylic (runny like house paint) will need very little water if any, while medium to heavy body paint (thick like toothpaste) will need more water. Try to limit the amount of water that you use ... too much will break down the binding properties of the acrylic paint. How much is too much? Try to keep the amount of water under 50% of the amount of paint.
Once my paintings dry, I spray them with a low odor, user-friendly, crystal clear, museum-quality varnish designed for acrylics, oils and watercolors. It gives a glossy finish.
Here is a link: http://amzn.to/2jGh3KO
When I want to spray a matte/satin finish instead, I use this: http://amzn.to/2fvgYF0
Thank you in advance for watching the videos, sharing them, commenting and leaving a thumbs up. Your kindness helps my channel continue and it is all greatly appreciated! May the alcohol inks, resin, and paints be kind, and may the pours be with you. 😊💕 35] DENDRITE FRACTALS : Easy Technique - GREAT Results - Different Styles - Acrylics or India Ink](https://i.ytimg.com/vi/hZy4kGqoJq8/mqdefault.jpg)
![168] ALCOHOL INK 🌷Translucent Painting Technique on NEW Grafix Opaque BLACK Craft Plastic - Marabu
Learn a fun, luminescent technique with alcohol ink on the new BLACK synthetic paper from Grafix. Using this plastic “paper”, I’ve come up with a way to get a colorful, translucent look. Grafix Opaque Black is perfect for inks, colored pencil, acrylics and more. It is rapidly becoming a favorite surface for wonderful alcohol ink effects... I think you’ll love it too.
For fun, tips, tricks, ideas, help & more, join my FACEBOOK GROUP:
https://www.facebook.com/groups/Myriams.Fluid.Art.Tribe
https://facebook.com/MyriamsNature
EASY WAYS TO TAKE PART IN GETTING VIDEOS MADE :
🔹 Contributing for supplies: https://www.PayPal.me/MyriamsNature
🔸🔸Being a monthly patron (this includes rewards like EXCLUSIVE videos!😄🎉) :
https://www.patreon.com/myriamsnature
🔹 Amazon wishlist : http://www.amazon.com/registry/wishlist/18P8J68XW9RJA
🔹 Easy Shopping for Alcohol Ink Art, Acrylic Pouring, and Resin Art :
https://www.amazon.com/shop/MyriamsNature
Categorized PICTURED LINKS to hundreds of fluid art products! 😊
MATERIALS
▪️GRAFIX Opaque ⭐️BLACK⭐️ Craft Plastic
— 9x12” - pack of 25 sheets: http://bit.ly/GrafixBLACK-9x12-25
— 12x12” - pack of 25 sheets: http://bit.ly/GrafixBLACK-12x12-25
— 12x12” - pack of 4 sheets: http://bit.ly/GrafixBLACK-12x12-4
- - - - - - - -
If you’d like the WHITE version too:
▪️GRAFIX Opaque WHITE Craft Plastic
— 9x12” - pack of 25 sheets: http://bit.ly/Grafix-9x12-25
— 12x12” - pack of 25 sheets: http://bit.ly/Grafix-12x12-25
— 12x12” - pack of 4 sheets: http://bit.ly/Grafix-12x12-4
- - - - - - - -
‼️ MARABU Alcohol Inks - on sale - 50% OFF using these links :
▪️Marabu White Alcohol Ink - 20 ml bottle : http://bit.ly/MarabuWhite
🔹⭐️ The SET of all 14 NEW Marabu alcohol ink colors : http://bit.ly/Marabu14
🔹The colors individually (NEW colors at the TOP of the list) : http://bit.ly/MarabuInksNew
🔹The ORIGINAL set of 28 inks : http://bit.ly/MarabuInk—All28
- - - - - - - -
▪️PRISMACOLOR Colored Pencils
— Set of 12: https://amzn.to/2YQZPcX
— Set of 36: https://amzn.to/31obl0X
— Set of 72: https://amzn.to/2MQ4WHN
(Other set sizes available)
Prismacolor lightfast ratings : https://cdn.dick-blick.com/pdfs/20508color.pdf
- - - - - - - -
▪️KAMAR Varnish (seals alcohol ink without bleeding, blooming or reactivating the inks) : https://amzn.to/2Evyv9N
▪️ AFTER using Kamar, you may choose to add a layer of UV Resistant Acrylic as well for added protection: https://amzn.to/2JisymO
TOOLS and SUPPLIES
▪️MICROBRUSHES:
— 400 in 4 sizes & colors: https://amzn.to/2zW2o6l
—100 in 1 size & color :
https://amzn.to/31i5J8k
▪️HOT AIR BRUSH options:
— Conair (the one I have): https://amzn.to/2Y7bG6p
— Revlon ( a few $ more, has a “cool” setting) : https://amzn.to/2XN1btw 168] ALCOHOL INK 🌷Translucent Painting Technique on NEW Grafix Opaque BLACK Craft Plastic - Marabu](https://i.ytimg.com/vi/i216kts3bKk/mqdefault.jpg)
![137] Alcohol Ink : My Favorite AIRBRUSH for Just Blowing Air and Why!
Wondering what airbrush to get JUST to BLOW AIR for Alcohol Ink or Fluid Acrylic art? This video gives you a detailed view and explanation of the one I use the most.
💥 Join my FACEBOOK GROUP: https://www.facebook.com/groups/Myriams.Fluid.Art.Tribe
https://facebook.com/MyriamsNature
SOME WAYS TO HELP KEEP VIDEOS COMING :
🔹 Contributing for supplies: https://www.PayPal.me/MyriamsNature
🔸Being a monthly patron (this includes rewards like EXCLUSIVE videos!😄🎉) :
https://www.patreon.com/myriamsnature
🔹 Amazon wishlist (some things are realistic, some are a dream 😄): http://www.amazon.com/registry/wishlist/18P8J68XW9RJA
❇️ Convenient Shopping for Acrylic, Resin & Alcohol Ink Art:
https://www.amazon.com/shop/MyriamsNature
♦️🔸 For picture links specific to alcohol inks : https://kit.co/MyriamsNature/my-fave-alcohol-ink-supplies 🔸♦️
🔹 Jacquard PIÑATA Alcohol Inks
✨ I highly recommend the Jacquard PIÑATA “Exciter Pack” of 9 alcohol inks! These inks are rich, vibrant and HIGHLY pigmented... you get great concentrated inks for your money.
— ▪️ Exciter Pack: http://amzn.to/2G2tkAB
🔺For Canadians: https://amzn.to/2HzXn3c
—▪️ PIÑATA Alcohol Inks individually:
(this link automatically places the 5 NEW colors at the top):
http://bit.ly/Piñata-NewFirst
🔹MARABU Alcohol Inks
—▪️The FULL set of 28 : http://bit.ly/MarabuInk—All28
—▪️Marabu Rainbow solution: http://bit.ly/MarabuRainbow
—▪️To buy the colors individually: http://bit.ly/MarabuInks
▪️99% Isopropyl Alcohol : https://amzn.to/2XnsLZt
(Make sure 99% is selected)
TOOLS
🔹 My favorite airbrush (from Master) is extremely easy to use... anyone can operate it within 3 - 5 minutes of opening the box... this includes a mini-compressor, the airbrush and hose: https://amzn.to/2BHzdCo
▪️Full-size air compressor with regulator, hose and airbrush included : https://amzn.to/2lUYAfc
▪️Full-size air compressor AND tank, with regulator... hose included but NOT airbrush (this is the one I have... the tank stores air allowing the compressor to not run all the time) : https://amzn.to/2nA7bUX
▪️ Fiskars 12” Portable Paper Cutter: https://amzn.to/2H3e0Ws
▪️HOT AIR Blower options:
— Conair (the one I have): https://amzn.to/2Y7bG6p
— Revlon ( a few $ more, has a “cool” setting) : https://amzn.to/2XN1btw
▪️ CAKE SPINNERS / LAZY SUSANS:
— 12” diameter x 3” tall (with no lip): https://amzn.to/2H0DAva
— 12” diameter x 1.2” tall (with no lip) : https://amzn.to/2Y6NjJM
— 18” Lazy Susan x 1” inch tall (has a lip which may be helpful or inconvenient depending on the task) : https://amzn.to/2LqYBn8
▪️MICROBRUSHES:
— 400 in 4 sizes & colors: https://amzn.to/2zW2o6l
—100 in 1 size & color :
https://amzn.to/31i5J8k
▪️10 ml needle-tip bottles - pack of 20 : https://amzn.to/2y4wMay
▪️12 squeeze bottles (1.7 oz/ 50ml) with 24 needle tip attachments: https://amzn.to/2K44zrm
▪️6 squeeze bottles (30ml & 50ml) with 15 needle tip attachments: https://amzn.to/313W5pW
Best price but will take weeks to arrive.
▪️ PLASTIC PALETTES:
— Pack of 3 rectangular with 6 wells each : https://amzn.to/2V8oeg9
— Pack of 3 round with 10 wells each : https://amzn.to/2VV2C3R
▪️ The squeeze bottles that had the thinned alcohol ink :
— for a pack of 6: https://amzn.to/2qNs517
— for a pack of 12: https://amzn.to/2qLBrKs
SEALING / VARNISHING
▪️Kamar Varnish (seals alcohol ink without bleeding, blooming or reactivating the inks) : https://amzn.to/2Evyv9N
▪️ AFTER using Kamar, you may choose to add a layer of UV Resistant Acrylic as well for added protection: https://amzn.to/2JisymO
Thank you in advance for watching the videos, sharing them, commenting and leaving a thumbs up. Your kindness helps my channel continue and it is all greatly appreciated! May the alcohol inks, resin, and paints be kind, and may the pours be with you. 😊💕 137] Alcohol Ink : My Favorite AIRBRUSH for Just Blowing Air and Why!](https://i.ytimg.com/vi/iLWcooulWpE/mqdefault.jpg)