Bobs Wood StuffIn this episode of Joinery Class, I show the process of MAKING A KNIFE WALL to get clean saw cuts in your hand tool woodworking. This is an essential technique for cutting accurate joints with clean shoulders, whether you are making a mortise and tenon, dovetail, lap joint, or anything else. I reference the knife wall in all my Joinery Class videos, so now I can refer to this video instead of going over the technique in detail each time.
I recommend marking the joints with a marking knife, but the knife wall can also be made on pencil lines.
The technique has been around for a very long time, and the name "knifewall" was popularized by Paul Sellers, a proponent of the technique.
Tools used in this project: (Amazon affiliate links) -------------------------------------------------------------------- Mini Dozuki dovetail saw: amzn.to/2X3Pqgc
Joinery Class Ep 4: Making a Knife WallBobs Wood Stuff2020-06-24 | In this episode of Joinery Class, I show the process of MAKING A KNIFE WALL to get clean saw cuts in your hand tool woodworking. This is an essential technique for cutting accurate joints with clean shoulders, whether you are making a mortise and tenon, dovetail, lap joint, or anything else. I reference the knife wall in all my Joinery Class videos, so now I can refer to this video instead of going over the technique in detail each time.
I recommend marking the joints with a marking knife, but the knife wall can also be made on pencil lines.
The technique has been around for a very long time, and the name "knifewall" was popularized by Paul Sellers, a proponent of the technique.
Tools used in this project: (Amazon affiliate links) -------------------------------------------------------------------- Mini Dozuki dovetail saw: amzn.to/2X3Pqgc
Website: http://www.bobswoodstuff.com Instagram: instagram.com/bobswoodstuffMaking plywood gears with my desktop laserBobs Wood Stuff2022-12-20 | I've been using my Ortur Laser Master 3 diode laser to cut wooden gears for building machines with.Laser Engraving a Cutting Board with the Ortur Laser Master 3Bobs Wood Stuff2022-11-09 | I used the Ortur Laser Master 3 to burn a design into a cutting board that I made by gluing up scraps of walnut wood.
This works very well for burning designs, and I've had the best results with walnut, cherry, and mahogany.
In the future I plan to use it on metal, acrylic, glass, and tile.
You can purchase this same laser engraver on Amazon here: amzn.to/3hzvzCr
* I receive a commission on qualified purchases made at these links.Power Washer montage on the teak outdoor chairBobs Wood Stuff2022-11-06 | Here's a power washing excerpt from my upcoming video about refinishing a teak patio set. #powerwashing #pressurewashing #powerwasherUsing CA Glue to Joint on the Table SawBobs Wood Stuff2022-06-22 | In this Quick Tip I show how to use CA glue with a straight edge to make your table saw into a jointer. If you're like me and don't have a jointer, this can be a very useful technique to get a flat straight edge on your boards.
It is possible to do this with double sided tape, but it works better with cyanoacrylate glue (CA glue).
I make a percentage on sales from this link, at no additional cost to the buyer.
My Website: http://www.bobswoodstuff.com Instagram: instagram.com/bobswoodstuffThe Timber Report 001: Lumber Prices 2022Bobs Wood Stuff2022-06-13 | In this first episode of The Timber Report, I cover upcoming woodworking shows in 2022 and lumber prices in April and May. The price of lumber has dropped in April and May. I give an explanation why it fell and what to expect in June and going forward.
Instagram: instagram.com/bobswoodstuffULTIMATE Dune Fanart - Hand Carved SandwormBobs Wood Stuff2022-05-18 | In appreciation of the new Dune movie, I made a large relief carving. I used only hand tools, and you can see how I carved and finished the piece. There is a lot of sound design in this, so I recommend wearing good headphones or using good speakers to watch.
Website: http://www.bobswoodstuff.com Instagram: instagram.com/bobswoodstuffDont throw that damaged carving away! FIX IT!Bobs Wood Stuff2021-10-04 | This is how I fix a chipped wood carving using CA glue. This works for doing a carving repair in basswood as well as other species.
Use the code BOBSGLUESTUFF to get 10% off site-wide
Tools used in this project: (Amazon affiliate links) -------------------------------------------------------------------- Flexcut carving tool set: amzn.to/3u76csP Starbond CA glue - Medium: amzn.to/3iu3avc Starbond CA glue - Thin: amzn.to/2YnGNQX Starbond Accelerator: amzn.to/3l4sjxY
Website: http://www.bobswoodstuff.com Instagram: instagram.com/bobswoodstuffPractical Effects DIY - Making captions with my Cricut Maker 3 #shortsBobs Wood Stuff2021-09-16 | I recreated a special effect that I saw in the movie They Came Together using my Cricut Maker 3 to make physical letters out of basswood and doing some editing in Adobe Premiere. I'm super happy with how it came out. This is an example of combining practical effects with special effects.
Cricut gave me a Maker 3 machine in exchange for doing a couple TikTok videos about projects I made with it. #shorts
Artist- Jaxius Link- youtube.com/channel/UCacamYVDLEtG00SWmJuR8qw Synthwave styled music, heavily influenced by Carpenter Brut. If you enjoy this, leave a like and subscribe for more and follow me on my other platforms.
open.spotify.com/album/1G34ECZMmYBnkQ92H9IGZzSharpening Carving Tools 101Bobs Wood Stuff2021-08-16 | This video shows how to strop a set of woodcarving tools. I demonstrate how to use the SlipStrop for stropping a carving chisel, v-tool, and a carving gouge. A sharp tool is essential for hand tool carving, and this is how to keep them razor sharp.
I also go into some detail about which carving tool set to buy, since some sets will arrive sharp and ready to use, while other sets need some preliminary sharpening before they are ready to be stropped and used.
If your tools have an uneven edge, are damaged, or are ground poorly, they will need to be reprofiled and/or sharpened before being stropped.
Schaaf 12-piece woodcarving set. They are decent tools, but require some setup. My set had several tools with uneven edges. The company says they will replace tools with such an edge, but I re-profiled them myself): amzn.to/37NeRXQ
Timestamps: 0:00 Intro 0:49 Stropping a Carving Chisel 1:32 Stropping a V-tool 3:37 Stropping a Carving Gouge 5:45 OutroMaking Decorative Fenceposts - fast version #shortsBobs Wood Stuff2021-07-31 | This is a sped-up version of my video Making Decorative Fenceposts. #shorts It goes over the process of cutting a custom design into redwood 4x4s for building a small fence.
You can see the full version of the video on my channel here: youtu.be/EawCqfwlkak
Website: http://www.bobswoodstuff.com Instagram: instagram.com/bobswoodstuffLUXURY Cornhole Board from Mahogany and TeakBobs Wood Stuff2021-07-21 | Here's how I made a set of premium cornhole boards. This custom cornhole set is regulation size, and the video covers the main measurements. Cornhole is one of my favorite backyard games, and it was fun to do this DIY project as a birthday present for my brother.
Tools used in this project: (Amazon affiliate links) -------------------------------------------------------------------- Cornhole bags: amzn.to/3rmUIAQ (these regulation bags have a slick side and a sticky side) Titebond Polyurethane Glue: amzn.to/3zeVItu Skilsaw jig saw: amzn.to/32rl0nmf
My Woodworking plans: bobswoodstuff.com/store Instagram: instagram.com/bobswoodstuffCorner Bass Trap DIY - Acoustic DampenerBobs Wood Stuff2021-04-09 | I made this bass trap for the corner of my home studio to absorb some of the echoes and noise in the room. When paired with other acoustic treatments, this bass trap helps improve the sound in the corner of a room.
It uses mineral wool to absorb sound frequencies, and the ribs of the structure diffuse sound a little bit as well. This was a nice addition to my recording studio.
My Website: http://www.bobswoodstuff.com Instagram: instagram.com/bobswoodstuffVERY UNIQUE Planter from Redwood 2x4s - with plansBobs Wood Stuff2021-03-11 | I built this coffee mug shaped planter out of redwood 2x4s. It is constructed like a barrel using staves and biscuit joints. This is a fun solution for planting your coffee or other vegetables or flowers.
Website: http://www.bobswoodstuff.com Instagram: instagram.com/bobswoodstuffEasy DIY Plant Stand with FREE PLANSBobs Wood Stuff2021-02-26 | Here is how to make a DIY wooden plant stand out of a 4x4 and a dowel. The size of the plant stand is adjustable to fit your pot. It is a fast and easy woodworking project that is good for beginners or experienced woodworkers who want to make a quick stand. Make sure to get the free plans below.
Website: http://www.bobswoodstuff.com Instagram: instagram.com/bobswoodstuffTrestle Style Elevated Planter Box Design - DIYBobs Wood Stuff2021-01-25 | This is my latest elevated planter box design, which uses crossed legs in a trestle style secured by solid half lap joints. This video shows in detail how to build the elevated planter bed. This stand up planter is great for growing vegetables without bending over. I suggest using redwood or cedar for the planter, since those woods are rot and pest resistant.
I tried a new editing style for this video, and I hope you like it.
amazon.com/shop/bobswoodstuffJapanese Saw Storage CaseBobs Wood Stuff2021-01-05 | I built this storage case for Japanese saws so I can transport and store them safely and without damage. I used kaizen foam to hold them in the case. The box is constructed with solid box joints (finger joints) and mortise and tenon joints. The front panel is made of clear acrylic, which displays the saws in a pleasing way.
I used pine for the box and teak for the frame of the lid. The box is colored with aniline dye and finished with Tung oil finish.
Tung Oil Finish: amzn.to/2VoZld8 Klean-Strip Denatured Alcohol - 1 Gallon: amzn.to/2WNxFid Titebond I - 1 quart: amzn.to/2oUrFZI Titebond III - 16oz: amzn.to/36HuizgShop Vac Filter Hack - LeggingsBobs Wood Stuff2020-12-15 | In this quick tip I show a useful shop vac filter hack, which involves wrapping a piece of leggings around the filter to keep it clean of fine dust. This is a must if you are using a shop vac for sawdust collection in your shop.
Website: http://www.bobswoodstuff.com Instagram: instagram.com/bobswoodstuffHand Plane Parts: All About the Lever CapBobs Wood Stuff2020-12-02 | In this part of the Hand Plane Parts series, I go into detail about the lever cap, such as what it does, how it works, and how to maintain it. I also show how to hone the lever cap on a whetstone or lapping plate.
The lever cap helps to hold the cap iron and chip breaker to the frog.
Intro music by Dustin Prock.
Tools used in this project: (Amazon affiliate links) -------------------------------------------------------------------- Boeshield T-9 amzn.to/2WQAUrB
Timestamps: 0:00 Introduction 0:28 What does the lever cap do? 1:18 How does it work? 1:59 How do you use it correctly? 2:33 Honing the lever capHand Plane Parts: How a Chip Breaker WorksBobs Wood Stuff2020-11-24 | This video is the first in a new series called Hand Plane Parts. How a Chip Breaker Works goes over the purpose of a chip breaker, how it should be adjusted and used, how to hone a chip breaker.
This is a remake of my first ever YouTube video by the same name, which can be found here: youtu.be/xpKyPIxyyEk
Timestamps: 0:00 Introduction 0:18 Intro to the chip breaker 1:08 Honing the chip breaker 1:25 What does the chip breaker do? 3:04 Tuning the hand planeMaking Your own Canvas Frame for CHEAP!Bobs Wood Stuff2020-11-10 | In this video I make my own DIY frame for stretching a canvas that is already painted. Stretching a canvas is expensive to pay a professional to do, but it is not that hard to stretch your own canvas onto a homemade wood frame.
I use a glued and nailed half lap joint on the corners of the frame, but a bridle joint is also a very good option for making canvas frames. A hand-operated staple gun will work for this project, but a pneumatic staple gun is much easier to use. The canvas pliers are not totally necessary, but they make it a lot easier to stretch the canvas tightly.
Leave a comment if you have any questions!
Music courtesy of David Falzone, Christian Eck and DB Walker
Paint-by-numbers Canvases in this Video: (Amazon affiliate links) -------------------------------------------------------------------- Magic Cat painting: amzn.to/3kf1tzL Surf Shack painting: amzn.to/3lklrue (this one says it's oil, but I am pretty sure it's acrylic and they are just keyword stuffing)
Tools used in this project: (Amazon affiliate links) -------------------------------------------------------------------- Arrow T50 staple gun: amzn.to/3ncaw6l T50 1/4" staples: amzn.to/32zVhwh Canvas pliers: amzn.to/3eLP70C
Website: http://www.bobswoodstuff.com Instagram: instagram.com/bobswoodstuffUsing SketchUp Pro 2020 as a Woodworking Design SoftwareBobs Wood Stuff2020-11-05 | In this tutorial I go over the basics of how to design and model furniture in SketchUp and make woodworking plans with dimensions. This covers the conceptual aspect of design, as well as how to use many of the tools in the SketchUp's tool tray.
Timestamps 0:00 Introduction 0:20 Starting the Design Process 0:52 Laying out Basic Dimensions 3:02 Designing and Modeling the Table Legs 9:03 Designing and Modeling the Table Apron 12:05 Joinery Considerations 12:19 Marking Dimensions for Woodworking Plans 13:20 Creating Scenes in SketchUp 13:54 OutroUnboxing and Assembling a PowerTec 1x30 Belt/Disc SanderBobs Wood Stuff2020-10-19 | I finally got fed up with my old belt sander, so I bought this new one with a 1" x 30" belt, which also has a disc sander attached. It required some assembly, which was pretty simple and I show every step in this video.
The sanding table stayed at 90 degrees the whole time I was using it, and gave me nice perpendicular surfaces.
Website: http://www.bobswoodstuff.com Instagram: instagram.com/bobswoodstuffJoinery Class Ep 3: Mitered Half Lap Joint - joinery hand toolsBobs Wood Stuff2020-09-28 | In Episode 3 of the Joinery Class series, I cut a mitered half lap joint using hand tools. This is a stronger alternative to the normal miter joint, because it has a face-on-face long grain glue surface. It is a strong and nice-looking joint for making frames.
This episode was released out of order. The next one will be Episode 6.
Music courtesy of David Falzone, Christian Eck and DB Walker
Tools used in this project: (Amazon affiliate links) -------------------------------------------------------------------- Ryoba 2-sided Japanese saw: amzn.to/2JYBxZT Mini Dozuki saw: amzn.to/2X3Pqgc 2" Marples chisel: amzn.to/2PIoz69 Empire 6" combination square: amzn.to/2C8hxjb
Website: http://www.bobswoodstuff.com Instagram: instagram.com/bobswoodstuffElegant Leaning Planter from FENCE BOARDS and 2x6Bobs Wood Stuff2020-09-21 | This redwood leaning planter box is a great DIY project, and it is very sturdy. The design is elegant and the dado joint makes it very strong. For a faster, easier construction you can skip the dado joint, but it is much stronger and nicer-looking with the joint.
It's made out of 2x6 lumber and 7-1/2" wide fence boards.
The planter is great for raised bed gardening of smaller plants like herbs, beans, carrots, spinach, radishes, beets, cabbage, greens, or peas.
Music courtesy of David Falzone, Christian Eck and DB Walker
Tools used in this project: (Amazon affiliate links) -------------------------------------------------------------------- Kataba crosscut saw: amzn.to/32lRUcR
Website: http://www.bobswoodstuff.com Instagram: instagram.com/bobswoodstuffFixing a Damaged GateBobs Wood Stuff2020-09-14 | Here is how I created a dovetail-shaped hardwood insert to fix the stile of a rotting gate. Lots of screws and impacts had caused the gate to split open, so I cut out the damaged part and replaced it with a piece of apitong. The gate latch is now very strong and should last for years.
Tools used in this project: (Amazon affiliate links) -------------------------------------------------------------------- Kataba crosscut saw: amzn.to/32lRUcR 2" Marples chisel: amzn.to/2PIoz69 Titebond III - 16oz: amzn.to/36Huizg
Apitong tree image by Bernard Dupont "Keruing (Dipterocarpus caudiferus) (Dipterocarpaceae)" flickr.com/people/65695019@N07 It has been cropped from the original format. Original: flickr.com/photos/berniedup/8080053980 Used under Creative Commons license. creativecommons.org/licenses/by-sa/2.0/deed.enModeling a MORTISE AND TENON joint in SketchUpBobs Wood Stuff2020-09-07 | In this SketchUp tutorial I show how to design a mortise and tenon joint in 3d and go over some joinery basics on what size to make a mortise in a table leg.
This is the first in my series of SketchUp videos. Leave a comment to let me know if there is something specific you would like to see a tutorial of.
Website: http://www.bobswoodstuff.com Instagram: instagram.com/bobswoodstuffUltimate Tensegrity Table - with JOINERY - plansBobs Wood Stuff2020-09-01 | I set out to design an elegant-looking tensegrity table (impossible table), using tapered sliding dovetails cut with hand tools. I used mahogany and African padauk for the structure and paracord for the cables. The splines are structural so the corners don't split. I am very pleased with how it looks.
Videos referenced in this video ----------------------------------------------------------------- Joinery Class Ep 4: Making a Knife Wall: youtu.be/44HTXRB8bmM Joinery Class Ep 5: Tapered Sliding Dovetail: youtu.be/JI9_Xizszco Chamfering a Dowel the Easy Way: youtu.be/R7D9ftWT_1s Working Small Parts with a Hand Plane: youtu.be/yvsQxsXbHNI
Tools used in this project: (Amazon affiliate links) -------------------------------------------------------------------- Denatured alcohol: amzn.to/2WNxFid Matte polycrylic finish: amzn.to/2WLwEHj Titebond I: amzn.to/2oUrFZI
Website: http://www.bobswoodstuff.com Instagram: instagram.com/bobswoodstuffSawing Grooves in a DowelBobs Wood Stuff2020-08-09 | Dowel joinery requires that your dowel is fluted, so the glue can go somewhere. This will show you how to saw grooves into a dowel using a hand saw. It is a good way to establish the grooves, and also an opportunity to get some practice with hand tools.
Tools used in this project: (Amazon affiliate links) -------------------------------------------------------------------- Dozuki Saw (from video): amzn.to/3gz4HNO
Website: http://www.bobswoodstuff.com Instagram: instagram.com/bobswoodstuffDIY Acoustic Skyline Diffuser - WALL ARTBobs Wood Stuff2020-08-01 | I made this skyline style acoustic sound diffuser (diffusor) for my new recording room. It makes a nice piece of wall art, and it also diffuses the sound a bit to reduce echo in recording. It seems to work fairly well as an acoustic treatment paired with dampening.
This diffuser is quite heavy, so I recommend attaching it firmly to the studs in several places.
I was experimenting with amore cinematic editing style in this video, and I hope you like it.
Tools used in this project: (Amazon affiliate links) -------------------------------------------------------------------- GRK Cabinet screws amzn.to/2QVGfuG
Porter Cable 2-1/4 hp router kit amzn.to/2NOQHBVSharpening Garden Shears with a WhetstoneBobs Wood Stuff2020-07-22 | In this video I am sharpening my garden shears, aka hedge shears, so I can cut my yucca plant. If you are familiar with sharpening knives or chisels, this type of garden shear is fairly easy to sharpen.
Originally I tried using a cheap whetstone, but it was very soft and would not stay flat very long, so I switched to my DMT diamond stones, which gave me better results. I went up to 6000 grit, but really 600 is good enough for garden shears.
There are cheaper options for diamond stones, but I have found that some of the 2-sided ones do not stay flat because the metal is thin. So I like the DMT stones with thick steel plates.
Tools used in this project: (Amazon affiliate links) -------------------------------------------------------------------- DMT 8″ diamond stone Coarse amzn.to/2xKfD9W
Website: http://www.bobswoodstuff.com Instagram: instagram.com/bobswoodstuffJoinery Class Ep 5: Tapered Sliding DovetailBobs Wood Stuff2020-07-16 | In this installment of Joinery Class, I show how to cut a tapered sliding dovetail with hand tools. This joint is very strong and tight because of the taper, and works well as a batten for board and batten doors. It can also help to stabilize cutting boards, like how a breadboard end prevents warping.
Website: http://www.bobswoodstuff.com Instagram: instagram.com/bobswoodstuffHow to Sharpen a Router PlaneBobs Wood Stuff2020-07-08 | The router plane is a great tool for precise leveling of surfaces, and can be used in all kinds of joinery. It is safer and easier to control than a powered router, but you need to sharpen it occasionally, so in this video I show how to sharpen the blade of the router plane.
Tools used in this project: (Amazon affiliate links) -------------------------------------------------------------------- DMT 8″ diamond stone Coarse amzn.to/2xKfD9W
Woodworking Plans: bobswoodstuff.com/store/premium-plansDIY Sandpaper SorterBobs Wood Stuff2020-07-01 | This quick tip is about making a DIY sandpaper sorter out of a file organizer. It is a great way to organize your sandpaper into grits and get rid of clutter from multiple sandpaper packages.
Product in this video: (Amazon affiliate link) -------------------------------------------------------------------- Heavy Duty File Organizer amzn.to/3caZ3hp
Website: http://www.bobswoodstuff.com Instagram: instagram.com/bobswoodstuffUsing Legos for Measuring - DIY Measuring ToolsBobs Wood Stuff2020-06-17 | This quick tip is about using Lego blocks (or bricks) as measuring devices. You can always purchase brass spacer blocks, but these DIY measuring tools are significantly cheaper, and you might already have some in your house. The blocks are produced with close tolerances, and can be stacked together to get to precise measurements. I have now started carrying a stack of bricks in my tool pouch, for quick setup of my router plane.
Website: http://www.bobswoodstuff.com Instagram: instagram.com/bobswoodstuffUnderstanding Grain Direction and Runout: Planing DownhillBobs Wood Stuff2020-06-16 | In this video I show how and why to plane downhill with the grain using a hand plane. This is important to know whether you are using a hand plane, jointer, planer, or any number of other hand tools that will not cut properly if you disregard the grain direction.
Image Credits --------------------------------------------------------------------------------- Broken bat - image by Minda Haas Kuhlmann. Twitter: @minda33. Instagram: minda.haas source: flickr.com/photos/mindahaas/33899121378 Licensed under Creative Commons 2.0: creativecommons.org/licenses/by/2.0Making an Octagon on the Table SawBobs Wood Stuff2020-06-15 | In this quick tip, I show how to cut a perfect octagon on the table saw, with no measuring at all. It can be difficult to get the right dimensions for an octagon, and this technique takes all the guess work out of it.
Tools used in this project: (Amazon affiliate links) -------------------------------------------------------------------- SawStop Jobsite Saw: amzn.to/2PW5RrG SawStop brake for 10" blades: amzn.to/2WS9PDp Diablo 10" combination saw blade: amzn.to/2NnxuIs
Website: http://www.bobswoodstuff.com Instagram: instagram.com/bobswoodstuffMaking Fluted Dowel Pins with PliersBobs Wood Stuff2020-06-12 | In this video I show how to make fluted dowel pins using pliers. All you need is a length of dowel or some dowel pins, and any kind of pliers that have a toothed jaw. Fluting the dowels is important if you are going to glue them, because the glue needs somewhere to go to prevent exploding the joint. This is the fastest and easiest way I know to flute a dowel pin, and hopefully it comes in handy for you too.
Website: http://www.bobswoodstuff.com Instagram: instagram.com/bobswoodstuffUsing Sawdust as MulchBobs Wood Stuff2020-06-11 | This tip is about using shop waste such as sawdust and wood shavings as mulch for your plants. It is a good way to reduce waste, while at the same time improving your garden.
Website: http://www.bobswoodstuff.com Instagram: instagram.com/bobswoodstuffUnboxing a Mini Dozuki Saw - Dozuki demoBobs Wood Stuff2020-06-10 | In this video I unbox a mini dozuki saw for a dozuki in action demo. I will test it out and review the saw. This small Japanese saw is a compact version of the full size dozuki saw, and it can be used for very fine accurate cuts when doing joinery. I like it a lot. This is not sponsored.
Tools used in this project: Amazon (affiliate links) -------------------------------------------------------------------- Mini Dozuki saw amzn.to/2X3Pqgc
Website: http://www.bobswoodstuff.com Instagram: instagram.com/bobswoodstuffPicking up Screws with a MagnetBobs Wood Stuff2020-06-09 | In this quick tip I show how to pick up screws or nails with a magnet. This can be used to easily separate metal items from wood and dust debris. It is also good for cleaning up metal shavings near a grinder.
Tools used in this project: (Amazon affiliate links) -------------------------------------------------------------------- Rare earth neodymium bar magnets: amzn.to/2M7SOAp
Website: http://www.bobswoodstuff.com Instagram: instagram.com/bobswoodstuffClamping Odd Shaped Objects in a ViseBobs Wood Stuff2020-06-08 | In this video I show how to use a halved section of PVC pipe to clamp odd shaped objects in a vise. This works surprisingly well, and holds the item very securely, especially for lumber that is out of square. Hopefully this helps you out in the shop.
Tools used in this project: (Amazon affiliate links) -------------------------------------------------------------------- Pony woodworking vise amzn.to/2RjR5cU
Website: http://www.bobswoodstuff.com Instagram: instagram.com/bobswoodstuffWorking Small Parts with a Hand PlaneBobs Wood Stuff2020-06-05 | In this quick tip, I show how to work small parts with a hand plane in a safe way. This is a great method of shaving down small parts on the hand plane, to resurface, resize, or joint them. Stay safe out there, and safe in the shop.
Website: http://www.bobswoodstuff.com Instagram: instagram.com/bobswoodstuffUsing an Awl for WoodworkingBobs Wood Stuff2020-06-04 | I go over the basics of using an awl for woodworking, to center the point of the drill bit in your wood. This improves drilling accuracy in all types of wood, and in softer wood can even be used as a pilot hole for small screws.
Tools used in this project: Amazon (affiliate links) -------------------------------------------------------------------- DeWalt cordless drill: amzn.to/2CpsDQI
Website: http://www.bobswoodstuff.com Instagram: instagram.com/bobswoodstuffJoinery Class Ep 2: Cogged Lap JointBobs Wood Stuff2020-06-03 | In this second episode of Joinery Class, I build a Cogged Lap Joint. This is a variant of a half lap joint that is much stronger because less material is removed from the support beam. There is also more strength against racking because of the additional shoulders in the joint.
The Cogged Lap Joint is often used in Japanese temple construction to support purlins on rafters or floor joists to bottom plates.
Tools used in this project: Amazon (affiliate links) -------------------------------------------------------------------- Mini Dozuki saw amzn.to/2X3Pqgc
0:00 Cogged Lap Joint 0:49 Marking the Lower Piece 2:32 Making the Knife Wall 3:26 Sawing the Shoulders 4:18 Chiseling out the Waste 6:15 Hand Planing to Fit 8:03 Marking the Upper Piece 9:57 Sawing the Upper Piece 10:57 Chiseling out the WasteWaxing a Hand Plane SoleBobs Wood Stuff2020-06-02 | If you are doing any extended use of a hand plane, you will want to wax the sole of it to reduce friction. This will save your arms a lot of work as you use the hand plane. Paraffin wax is available in the canning section of the supermarket, or online. You can also rub a candle or some wax paper on the plane sole.
1lb. paraffin wax: amzn.to/3bZHzEH (Amazon affiliate link) 1 pound is more than you will ever need, but that seems like the smallest amount it is sold in.
Website: http://www.bobswoodstuff.com Instagram: instagram.com/bobswoodstuffFinding the Middle of a BoardBobs Wood Stuff2020-06-01 | Here is a tip to help you quickly and accurately find the middle of a board, whether it is a narrow or wide board. This can be done with a normal ruler, there is very little math involved, and you won't have to deal with fractions.Raising Wood Grain with WaterBobs Wood Stuff2020-05-31 | It is a good idea to raise the wood grain of your projects by spraying them with water. This helps achieve a smoother finish surface, because the moisture in finishes can raise the grain of the wood. By raising it with water beforehand and sanding it down, the finish does not raise the grain as much.
Website: http://www.bobswoodstuff.com Instagram: instagram.com/bobswoodstuff Merchandise: teespring.com/stores/bobs-wood-stuff-storeDrawing a Curve on Wood with a Bent RulerBobs Wood Stuff2020-05-30 | Here I show my favorite method of drawing a curve on wood with a straight edge. The bend can be adjusted based on how deep you want the curve, or even shifted to one side or another if you want an off-centered curve. A bent piece of wood can also be used to draw the curve.