#419: Back to Basics: Comprehensive Guide to using an Analog VOM (volt-ohm-milliammeter) @w2aew
#419: Back to Basics: Comprehensive Guide to using an Analog VOM (volt-ohm-milliammeter)  @w2aew
Uploaded November 2026 | Updated November 2026, 3 hours ago
This video shows how to use an Analog VOM (Volt-Ohm-Milliammeter), as well as giving some background regarding why I think VOMs still have a place on your bench. The video talks about proper function and range selection, how to use and interpret the meter scales, as well as looking at the loading effects, accuracy considerations and the use of the additional input jacks on the meter. Here is a chapter list of the topics in this video:

00:00 Introduction and Video Chapter agenda
01:44 Why would you want to use an Analog VOM?
04:16 Functions & Ranges on the VOM
06:20 Intro to the scales on the meter face
07:25 Range Settings and Scale selection
09:09 Reading & interpreting values on the meter
11:53 Parallax error
13:07 Making Voltage measurements on an example circuit
16:14 Making Current measurements on an example circuit
20:09 Making Resistance measurements
24:26 Accuracy & Range selection
25:45 Loading effects when making voltage measurements
28:01 AC RMS voltage measurement considerations
28:51 What's with the extra input jacks?
31:42 Conclusion

Notes from this video:
qsl.net/w2aew/youtube/VOM.pdf
#419: Back to Basics: Comprehensive Guide to using an Analog VOM (volt-ohm-milliammeter)#295: What is SINAD & Overview / How to Use the Sinadder 3 for FM receiver alignment#355: Radio Review: FX-4C SDR  QRP Transceiver | Review of features and operating controls#338: Probe Tips: Beware of capacitive loading of oscilloscope probes on your circuit operation#294: Delay / Skew Measurement, and a trick to separate device and cable delays#305: Measuring Total Harmonic Distortion THD using an FFT on an oscilloscope#377: How to install a crimp-on BNC connector to RG-8X coax cable#270: Tune a Duplexer with a Spectrum Analyzer + Tracking Gen or VNA#322: Followup: Simpson 260 Series 7 & 8 Reversed Banana Lead solutions#403: Measuring a Directional Coupler with a SV4401A VNA#310: 3rd order Intermodulation Distortion (IMD) and their effect in radio receivers#347: Quick test of the 40m Halfwave End-Fed antenna using a 49:1 transformer / UNUN
w2aew |

#419: Back to Basics: Comprehensive Guide to using an Analog VOM (volt-ohm-milliammeter)

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER