Uploaded July 2016 | Updated November 2026, 5 days ago
A look at my latest powerbank device. Overall - one of the better ones I have seen. Only the output is a bit on the low side, but it is very good to the batteries - low charge current, 4.15V cutoff voltage. And you can use it with 1, 2, 3 or 4 cells. Powered by TPS MP3411 chip. Back panel states 10400mAh, but of course that depends on what cells you put in. Also, as mentioned before, 2.1A output stated on the case is not happening here. At 600mA voltage dropped to 4.65V, so higher power output is out of reach.
ebay link: ebay.com/itm/252410974657
A look at my latest powerbank device. Overall - one of the better ones I have seen. Only the output is a bit on the low side, but it is very good to the batteries - low charge current, 4.15V cutoff voltage. And you can use it with 1, 2, 3 or 4 cells. Powered by TPS MP3411 chip. Back panel states 10400mAh, but of course that depends on what cells you put in. Also, as mentioned before, 2.1A output stated on the case is not happening here. At 600mA voltage dropped to 4.65V, so higher power output is out of reach.
ebay link: ebay.com/itm/252410974657








