Pete Vree | 4 to 20 mA PLC & HMI Program to display the output of a DP Cell (Part 2) @PeteVree | Uploaded 2 years ago | Updated 1 day ago
Full Siemens TIA Portal PLC Programming Course available here: https://petevree.thinkific.com/courses/siemens-tia-portal-plc-programming
Part 1 is available here: https://www.youtube.com/watch?v=n0VNll4K94M
Part 3 is available here:
Continuing on with our DP Cell PLC program... we will create additional networks that take the 4 to 20 mA signal from the DP cell and create various Memory DWords that can be sent to the HMI. We will also create some assignments for the 0 to 5 V DC that is required to ramp the pump output from 0 to 100 %.
HMI Screen creation instructions will follow on the next video.
Full Siemens TIA Portal PLC Programming Course available here: https://petevree.thinkific.com/courses/siemens-tia-portal-plc-programming
Part 1 is available here: https://www.youtube.com/watch?v=n0VNll4K94M
Part 3 is available here:
Continuing on with our DP Cell PLC program... we will create additional networks that take the 4 to 20 mA signal from the DP cell and create various Memory DWords that can be sent to the HMI. We will also create some assignments for the 0 to 5 V DC that is required to ramp the pump output from 0 to 100 %.
HMI Screen creation instructions will follow on the next video.