How Plywood Is Made In Factories? (Mega Factories Video) Engineering World 2021-05-28 | Plywood production requires a good log, called a peeler, which is generally straighter and larger in diameter than one required for processing into dimensioned lumber by a sawmill. The log is laid horizontally and rotated about its long axis while a long blade is pressed into it, causing a thin layer of wood to peel off (much as a continuous sheet of paper from a roll). An adjustable nosebar, which may be solid or a roller, is pressed against the log during rotation, to create a "gap" for veneer to pass through between the knife and the nosebar. The nosebar partly compresses the wood as it is peeled; it controls vibration of the peeling knife; and assists in keeping the veneer being peeled to an accurate thickness. In this way the log is peeled into sheets of veneer, which are then cut to the desired oversize dimensions, to allow it to shrink (depending on wood species) when dried. The sheets are then patched, graded, glued together and then baked in a press at a temperature of at least 140 °C (284 °F), and at a pressure of up to 1.9 MPa (280 psi) (but more commonly 200 psi) to form the plywood panel. The panel can then be patched, have minor surface defects such as splits or small knot holes filled, re-sized, sanded or otherwise refinished, depending on the market for which it is intended.Plywood for indoor use generally uses the less expensive urea-formaldehyde glue, which has limited water resistance, while outdoor and marine-grade plywood are designed to withstand moisture, and use a water-resistant phenol-formaldehyde glue to prevent delamination and to retain strength in high humidity.Video Credit: www.westfraser.comJoin 'Engineering World' like many others to get access to special perks:youtube.com/channel/UCh2wZoBynUkHmTX2GOwAKKg/joinAlso, kindly consider subscribing to our channel if you liked the video: geni.us/SubscribeChannel Watch some of our other interesting manufacturing videos: How Cement Is Made?youtu.be/RcrMBYsB93EHow LUXURY Rolls-Royce Cars Are Made ? youtu.be/BVvnSzMqI3MHow Jigsaw Puzzles Are Made? youtu.be/nylElsB9MkE
How Cement Is Made? (Mega Factories Video) Engineering World 2022-09-23 | A cement is a binder, a substance used for construction that sets, hardens, and adheres to other materials to bind them together. Cement is seldom used on its own, but rather to bind sand and gravel (aggregate) together. Cement mixed with fine aggregate produces mortar for masonry, or with sand and gravel, produces concrete. Concrete is the most widely used material in existence and is behind only water as the planet's most-consumed resource.Cement manufacturing is a complex process that begins with mining and then grinding raw materials that include limestone and clay, to a fine powder, called raw meal, which is then heated to a sintering temperature as high as 1450 °C in a cement kiln. In this process, the chemical bonds of the raw materials are broken down and then they are recombined into new compounds. The result is called clinker, which are rounded nodules between 1mm and 25mm across. The clinker is ground to a fine powder in a cement mill and mixed with gypsum to create cement. The powdered cement is then mixed with water and aggregates to form concrete that is used in construction.Clinker quality depends on raw material composition, which has to be closely monitored to ensure the quality of the cement. Excess free lime, for example, results in undesirable effects such as volume expansion, increased setting time or reduced strength. Several laboratory and online systems can be employed to ensure process control in each step of the cement manufacturing process, including clinker formation.Video Credits: www.ohorongo-cement.comJoin 'Engineering World' like many others to get access to special perks:youtube.com/channel/UCh2wZoBynUkHmTX2GOwAKKg/joinAlso, kindly consider subscribing to our channel if you liked the video: geni.us/SubscribeChannel Watch some of our other interesting manufacturing videos: How Plywood Is Made In Factories? youtu.be/3Wh9NYvfStkHow LUXURY Rolls-Royce Cars Are Made ? youtu.be/BVvnSzMqI3MHow Jigsaw Puzzles Are Made? youtu.be/nylElsB9MkE
How Engines are made? (Mega Factories Video) Engineering World 2022-06-17 | An engine is a machine designed to convert one or more forms of energy into mechanical energy. Mechanical heat engines convert heat into work via various thermodynamic processes. The internal combustion engine is perhaps the most common example of a chemical heat engine, in which heat from the combustion of a fuel causes rapid pressurization of the gaseous combustion products in the combustion chamber, causing them to expand and drive a piston, which turns a crankshaft. Unlike internal combustion engines, a reaction engine (such as a jet engine) produces thrust by expelling reaction mass, in accordance with Newton's third law of motion.An engine block on the other hand is the structure which contains the cylinders, and other parts, of an internal combustion engine. In an early automotive engine, the engine block consisted of just the cylinder block, to which a separate crankcase was attached. Modern engine blocks typically have the crankcase integrated with the cylinder block as a single component. Engine blocks often also include elements such as coolant passages and oil galleries.Video Credits: www.bmwgroup.comJoin 'Engineering World' like many others to get access to special perks:youtube.com/channel/UCh2wZoBynUkHmTX2GOwAKKg/joinAlso, kindly consider subscribing to our channel if you liked the video: geni.us/SubscribeChannel Watch some of our other interesting manufacturing videos: How Plywood Is Made In Factories? youtu.be/3Wh9NYvfStkHow LUXURY Rolls-Royce Cars Are Made ? youtu.be/BVvnSzMqI3MHow Jigsaw Puzzles Are Made? youtu.be/nylElsB9MkE
How a Motorcycle is Made ? (Mega Factories Video) Engineering World 2022-05-29 | A motorcycle, often called a motorbike, bike, cycle, is a two- or three-wheeled motor vehicle. Motorcycle design varies greatly to suit a range of different purposes: long-distance travel, commuting, cruising, sport (including racing), and off-road riding. Motorcycling is riding a motorcycle and being involved in other related social activity such as joining a motorcycle club and attending motorcycle rallies.Motorcycle construction is the engineering, manufacturing, and assembly of components and systems for a motorcycle which results in the performance, cost, and aesthetics desired by the designer. With some exceptions, construction of modern mass-produced motorcycles has standardized on a steel or aluminum frame, telescopic forks holding the front wheel, and disc brakes. Some other body parts, designed for either aesthetic or performance reasons may be added. A petrol-powered engine typically consisting of between one and four cylinders (and less commonly, up to eight cylinders) coupled to a manual five- or six-speed sequential transmission drives the swingarm-mounted rear wheel by a chain, driveshaft, or belt. The repair can be done using a Motorcycle lift.Video Credits: www.honda.co.jpJoin 'Engineering World' like many others to get access to special perks:youtube.com/channel/UCh2wZoBynUkHmTX2GOwAKKg/joinAlso, kindly consider subscribing to our channel if you liked the video: geni.us/SubscribeChannel Watch some of our other interesting manufacturing videos: How Plywood Is Made In Factories? youtu.be/3Wh9NYvfStkHow LUXURY Rolls-Royce Cars Are Made ? youtu.be/BVvnSzMqI3MHow Jigsaw Puzzles Are Made? youtu.be/nylElsB9MkE
How Hyundai Tucson Is Made? (Mega Factories Video) Engineering World 2022-01-21 | The Hyundai Tucson is a compact crossover SUV produced by the South Korean manufacturer Hyundai since 2004. In the brand's lineup, the Tucson is positioned below the Santa Fe, and above the Kona and Creta. It is named after the city of Tucson, Arizona.The Tucson is the best-selling Hyundai SUV model, with more than 7 million units sold globally since it launched in 2004. The 2022 Hyundai Tucson is being produced at the carmaker's plant in Montgomery, Alabama. This also marks the first time that Hyundai has assembled the Tucson in the U.S., with all previous generations coming to the U.S. as imports from South Korea. The 2022 Hyundai Tucson is now the fourth product that will be produced at Hyundai's manufacturing plant in Alabama. The other models that are produced here include the Elantra, Santa Fe and Sonata. The Alabama plant will only be supplying the petrol-powered versions of the Tucson to the North American market. Video Credits: www.hyundaiusa.comJoin 'Engineering World' like many others to get access to special perks:youtube.com/channel/UCh2wZoBynUkHmTX2GOwAKKg/joinAlso, kindly consider subscribing to our channel if you liked the video: geni.us/SubscribeChannel Watch some of our other interesting manufacturing videos: How Plywood Is Made In Factories? youtu.be/3Wh9NYvfStkHow LUXURY Rolls-Royce Cars Are Made ? youtu.be/BVvnSzMqI3MHow Jigsaw Puzzles Are Made? youtu.be/nylElsB9MkE
How Wrenches Are Made? (Mega Factories Video) Engineering World 2021-10-08 | A wrench or spanner is a tool used to provide grip and mechanical advantage in applying torque to turn objects—usually rotary fasteners, such as nuts and bolts—or keep them from turning. Higher quality wrenches are typically made from chromium-vanadium alloy tool steels and are often drop-forged. They are frequently chrome-plated to resist corrosion and for ease of cleaning.The following are the manufacturing processes: 1. Cutting 2. Forging3. Trimming4. Perforation5. Burring and grinding6. Machine marking and bending:7. Broaching8. Tempering9. Sanding10. ChromingVideo Credits: www.beta-tools.comJoin 'Engineering World' like many others to get access to special perks:youtube.com/channel/UCh2wZoBynUkHmTX2GOwAKKg/joinAlso, kindly consider subscribing to our channel if you liked the video: geni.us/SubscribeChannel Watch some of our other interesting manufacturing videos: How Plywood Is Made In Factories? youtu.be/3Wh9NYvfStkHow LUXURY Rolls-Royce Cars Are Made ? youtu.be/BVvnSzMqI3MHow Jigsaw Puzzles Are Made? youtu.be/nylElsB9MkE
How Wind Turbines Are Made? (Mega Factories Video) Engineering World 2021-07-30 | A wind turbine is a device that converts the wind's kinetic energy into electrical energy.Wind turbines are manufactured in a wide range of sizes, with either horizontal or vertical axes. It is estimated that hundreds of thousands of large turbines, in installations known as wind farms, now generate over 650 gigawatts of power, with 60 GW added each year. Wind turbine design is a careful balance of cost, energy output, and fatigue life. Wind turbines convert wind energy to electrical energy for distribution. Conventional horizontal axis turbines can be divided into three components:- The rotor, which is approximately 20% of the wind turbine cost, includes the blades for converting wind energy to low speed rotational energy.- The generator, which is approximately 34% of the wind turbine cost, includes the electrical generator, the control electronics, and most likely a gearbox (e.g., planetary gear box), adjustable-speed drive, or continuously variable transmission component for converting the low-speed incoming rotation to high-speed rotation suitable for generating electricity.- The surrounding structure, which is approximately 15% of the wind turbine cost, includes the tower and rotor yaw mechanism.A 1.5 (MW) wind turbine of a type frequently seen in the United States has a tower 80 meters (260 ft) high. The rotor assembly (blades and hub) weighs 22,000 kilograms (48,000 lb). The nacelle, which contains the generator, weighs 52,000 kilograms (115,000 lb). The concrete base for the tower is constructed using 26,000 kilograms (58,000 lb) reinforcing steel and contains 190 cubic meters (250 cu yd) of concrete. The base is 15 meters (50 ft) in diameter and 2.4 meters (8 ft) thick near the center.Video Credits: Wind Towers Scotland, www.lmwindpower.com & www.enercon.deJoin 'Engineering World' like many others to get access to special perks:youtube.com/channel/UCh2wZoBynUkHmTX2GOwAKKg/joinAlso, kindly consider subscribing to our channel if you liked the video: geni.us/SubscribeChannel Watch some of our other interesting manufacturing videos: How Plywood Is Made In Factories? youtu.be/3Wh9NYvfStkHow LUXURY Rolls-Royce Cars Are Made ? youtu.be/BVvnSzMqI3MHow Jigsaw Puzzles Are Made? youtu.be/nylElsB9MkE
How Screwdrivers Are Made? (Mega Factories Video) Engineering World 2021-07-09 | A screwdriver includes an enlarged blade and a straight bit with parallel opposing surfaces. The surfaces apply torque to a screw slot over an increased area and reduce the tendency of the bit to slip out of the slot as compared to conventional commercially available screwdrivers. The screwdrivers are preferably made of hardened high quality steel so that they will be strong enough to withstand a substantial amount of torque.A screwdriver is classified by its tip, which is shaped to fit the driving surfaces—slots, grooves, recesses, etc.—on the corresponding screw head. Proper use requires that the screwdriver's tip engage the head of a screw of the same size and type designation as the screwdriver tip. Screwdriver tips are available in a wide variety of types and sizes. The two most common are the simple 'blade'-type for slotted screws, and Phillips, generically called "cross-recess", "cross-head", or "cross-point".Video Credits: www.bahco.comJoin 'Engineering World' like many others to get access to special perks:youtube.com/channel/UCh2wZoBynUkHmTX2GOwAKKg/joinAlso, kindly consider subscribing to our channel if you liked the video: geni.us/SubscribeChannel Watch some of our other interesting manufacturing videos: How Plywood Is Made In Factories? youtu.be/3Wh9NYvfStkHow LUXURY Rolls-Royce Cars Are Made ? youtu.be/BVvnSzMqI3MHow Jigsaw Puzzles Are Made? youtu.be/nylElsB9MkE
How Oxygen Tanks Are Made? (Mega Factories Video) Engineering World 2021-06-25 | An oxygen tank is a pressure vessel for storage and containment of oxygen at above atmospheric pressure. High-pressure gas tanks are also called bottles. Inside the cylinder the stored contents may be in a state of compressed gas, vapor over liquid, supercritical fluid, or dissolved in a substrate material, depending on the physical characteristics of the contents. A typical gas cylinder design is elongated, standing upright on a flattened bottom end, with the valve and fitting at the top for connecting to the receiving apparatus.The term cylinder in this context is not to be confused with tank, the latter being an open-top or vented container that stores liquids under gravity, though the term scuba tank is commonly used to refer to a cylinder used for breathing gas supply to an underwater breathing apparatus.Video Credit: www.luxfertanks.com & www.repkon.com.trJoin 'Engineering World' like many others to get access to special perks:youtube.com/channel/UCh2wZoBynUkHmTX2GOwAKKg/joinAlso, kindly consider subscribing to our channel if you liked the video: geni.us/SubscribeChannel Watch some of our other interesting manufacturing videos: How Plywood Is Made In Factories? youtu.be/3Wh9NYvfStkHow LUXURY Rolls-Royce Cars Are Made ? youtu.be/BVvnSzMqI3MHow Jigsaw Puzzles Are Made? youtu.be/nylElsB9MkE
How LUXURY Watches are Made? (Mega Factories Video) Engineering World 2021-06-18 | Patek Philippe manufactures its own watch components. Like other Swiss manufacturers, the company produces mostly mechanical movements with automatic or manual winding mechanism, but has also been producing quartz watches. In fact, Patek Philippe was one of the twenty Swiss watch companies that founded the Centre Electronique Horloger and collaboratively developed the first Swiss quartz movements, such as the Beta 21 movement (1969) which was used by several manufacturers in their watches. In 1950s, the company even produced a prototype for a mechanical digital wristwatch, Ref. 3414.Patek Philippe popularized complications such as perpetual calendar, split-seconds hand, chronograph, and minute repeater in mechanical watches. In 2009, the company announced that all of its future mechanical timepieces would be imprinted with the Patek Philippe Seal which requires a precision of -3/+2 seconds per day for diameters no less than 20 mm and -5/+4 seconds per day for diameters less than 20 mm, surpassing the highest industry standard of watch manufacturing and thus abandoning the Geneva Seal.In 2014, Patek Philippe introduced the Grandmaster Chime Ref. 5175, the most complicated wristwatch ever built by the manufacturer (with 20 complications, but no tourbillon), to celebrate its 175th anniversary. Only seven pieces of Ref. 5175 were created, with one permanently residing in the Patek Philippe Museum in Geneva. The sale price for each of the other six pieces was 2.5 million CHF (2.6 million US dollars).Video Credit: www.patek.comJoin 'Engineering World' like many others to get access to special perks:youtube.com/channel/UCh2wZoBynUkHmTX2GOwAKKg/joinAlso, kindly consider subscribing to our channel if you liked the video: geni.us/SubscribeChannel Watch some of our other interesting manufacturing videos: How Plywood Is Made In Factories? youtu.be/3Wh9NYvfStkHow LUXURY Rolls-Royce Cars Are Made ? youtu.be/BVvnSzMqI3MHow Jigsaw Puzzles Are Made? youtu.be/nylElsB9MkE
How Electric Cars are Made? (Mega Factories Video) Engineering World 2021-06-11 | An electric car is a car that is propelled by one or more electric motors, using energy stored in rechargeable batteries. Compared to internal combustion engine (ICE) vehicles, electric cars are quieter, have no exhaust emissions, and lower emissions overall. In the United States, as of 2020, the total cost of ownership of recent EVs is cheaper than that of equivalent ICE cars, due to lower fueling and maintenance costs.The main cost driver of an electric car is its battery. The price decreased from €600 per kWh in 2010, to €170 in 2017, to €100 in 2019Electric cars are critically important to the future of the automobile industry and to the environment; however, the form the electric car will ultimately take and its acceptance by the public are still uncertain. Consumption of decreasing oil supplies, concerns over air and noise pollution, and pollution caused (and energy consumed) by abandoned cars and the complications of recycling gasoline-powered cars are all driving forces that seem to be pushing toward the success of the electric car.Video Credits: www.porsche.comJoin 'Engineering World' like many others to get access to special perks:youtube.com/channel/UCh2wZoBynUkHmTX2GOwAKKg/joinAlso, kindly consider subscribing to our channel if you liked the video: geni.us/SubscribeChannel Watch some of our other interesting manufacturing videos: How Plywood Is Made In Factories? youtu.be/3Wh9NYvfStkHow LUXURY Rolls-Royce Cars Are Made ? youtu.be/BVvnSzMqI3MHow Jigsaw Puzzles Are Made? youtu.be/nylElsB9MkE
How Cookware is Made In Factories? (Mega Factories Video) Engineering World 2021-05-21 | Cookware is a food preparation equipment, such as cooking pots, pans, baking sheets etc. used in kitchens. Cookware is used on a stove or range cooktop, while bakeware is used in an oven. Some utensils are considered both cookware and bakeware.There is a great variety of cookware and bakeware in shape, material, and inside surface. Some materials conduct heat well; some retain heat well. Some surfaces are non-stick; some require seasoning.Some pots and their lids have handles or knobs made of low thermal conductance materials such as bakelite, plastic or wood, which make them easy to pick up without oven gloves.A good cooking pot design has an "overcook edge" which is what the lid lies on. The lid has a dripping edge that prevents condensation fluid from dripping off when handling the lid (taking it off and holding it 45°) or putting it down.Video Credits: www.korkmaz.com.tr & www.riess.atThis video is part of our ‘How Everyday Things are Made’ series. To watch other video of the series click on this link: youtube.com/playlist?list=PLmHzFWJOOSAoI1i6R-YMCdVIDmMDjBV40Join 'Engineering World' like many others to get access to special perks:youtube.com/channel/UCh2wZoBynUkHmTX2GOwAKKg/joinAlso, kindly consider subscribing to our channel if you liked the video: geni.us/SubscribeChannel Watch some of our other interesting manufacturing videos: How Plywood Is Made In Factories? youtu.be/3Wh9NYvfStkHow LUXURY Rolls-Royce Cars Are Made ? youtu.be/BVvnSzMqI3MHow Jigsaw Puzzles Are Made? youtu.be/nylElsB9MkE
How Cars Are Made In Factories? (Mega Factories Video) Engineering World 2021-04-30 | A car (or automobile) is a wheeled motor vehicle used for transportation. Most definitions of cars say that they run primarily on roads, seat one to eight people, have four wheels, and mainly transport people rather than goods.Large-scale, production-line manufacturing of affordable cars was started by Ransom Olds in 1901 at his Oldsmobile factory in Lansing, Michigan and based upon stationary assembly line techniques pioneered by Marc Isambard Brunel at the Portsmouth Block Mills, England, in 1802. The assembly line style of mass production and interchangeable parts had been pioneered in the U.S. by Thomas Blanchard in 1821, at the Springfield Armory in Springfield, Massachusetts. This concept was greatly expanded by Henry Ford, beginning in 1913 with the world's first moving assembly line for cars at the Highland Park Ford Plant.The automotive industry designs, develops, manufactures, markets, and sells the world's motor vehicles, more than three-quarters of which are cars. In 2018 there were 70 million cars manufactured worldwide, down 2 million from the previous year. The automotive industry in China produces by far the most (24 million in 2018), followed by Japan (8 million), Germany (5 million) and India (4 million). The largest market is China, followed by the USA.Video Credit: www.nissan-global.comThis video is part of our ‘How Everyday Things are Made’ series. To watch other video of the series click on this link: youtube.com/playlist?list=PLmHzFWJOOSAoI1i6R-YMCdVIDmMDjBV40Join 'Engineering World' like many others to get access to special perks:youtube.com/channel/UCh2wZoBynUkHmTX2GOwAKKg/joinAlso, kindly consider subscribing to our channel if you liked the video: geni.us/SubscribeChannel Watch some of our other interesting manufacturing videos: How Plywood Is Made In Factories? youtu.be/3Wh9NYvfStkHow LUXURY Rolls-Royce Cars Are Made ? youtu.be/BVvnSzMqI3MHow Jigsaw Puzzles Are Made? youtu.be/nylElsB9MkE
How Pencils are made in Factories? (Mega Factories Video) Engineering World 2021-04-23 | A pencil is an implement for writing or drawing, constructed of a narrow, solid pigment core in a protective casing that prevents the core from being broken or marking the user's hand. The lead of the pencil is a mix of finely ground graphite and clay powders. Before the two substances are mixed, they are separately cleaned of foreign matter and dried in a manner that creates large square cakes. Once the cakes have fully dried, the graphite and the clay squares are mixed together using water. The amount of clay content added to the graphite depends on the intended pencil hardness (lower proportions of clay makes the core softer), and the amount of time spent on grinding the mixture determines the quality of the lead. The mixture is then shaped into long spaghetti-like strings, straightened, dried, cut, and then tempered in a kiln. The resulting strings are dipped in oil or molten wax, which seeps into the tiny holes of the material and allows for the smooth writing ability of the pencil. A juniper or incense-cedar plank with several long parallel grooves is cut to fashion a "slat," and the graphite/clay strings are inserted into the grooves. Another grooved plank is glued on top, and the whole assembly is then cut into individual pencils, which are then varnished or painted. Many pencils feature an eraser on the top and so the process is usually still considered incomplete at this point. Each pencil has a shoulder cut on one end of the pencil to allow for a metal ferrule to be secured onto the wood. A rubber plug is then inserted into the ferrule for a functioning eraser on the end of the pencil.Video Credits: www.faber-castell.comThis video is part of our ‘How Everyday Things are Made’ series. To watch other video of the series click on this link: youtube.com/playlist?list=PLmHzFWJOOSAoI1i6R-YMCdVIDmMDjBV40Join 'Engineering World' like many others to get access to special perks:youtube.com/channel/UCh2wZoBynUkHmTX2GOwAKKg/joinAlso, kindly consider subscribing to our channel if you liked the video: geni.us/SubscribeChannel Watch some of our other interesting manufacturing videos: How Plywood Is Made In Factories? youtu.be/3Wh9NYvfStkHow LUXURY Rolls-Royce Cars Are Made ? youtu.be/BVvnSzMqI3MHow Jigsaw Puzzles Are Made? youtu.be/nylElsB9MkE
How Car Models Are Made? (Mega Factories Video) Engineering World 2021-04-16 | Clay modeling (or clay model making) for automobile prototypes was first introduced in the 1930s by automobile designer Harley Earl, head of the General Motors styling studio (known initially as the Art and Color Section, and later as the Design and Styling Department).Industrial plasticine is a modeling material which is mainly used by automotive design studios. It was developed as an industrial version of plasticine or hobby clay.Industrial plasticine is based on wax and typically contains sulfur, which gives a characteristic smell to most artificial clays. The styled object can be used to create moulds. However, largely because sulfur interfered with some mould-making processes, especially if clay surfaces are unsealed surfaces and platinum-cure Room Temperature Vulcanization silicone was used, sulfur-free variants are now available; these are usually much lighter than sulfur-containing clays.More recently, clay models are 3D scanned into a digital file using laser technology. This is then opened in Computer-aided design software to be worked further. If a negative mold is required, this data is sent to a milling machine.Video Credit: www.audi.com & www.bmw.com This video is part of our ‘How Everyday Things are Made’ series. To watch other video of the series click on this link: youtube.com/playlist?list=PLmHzFWJOOSAoI1i6R-YMCdVIDmMDjBV40Join 'Engineering World' like many others to get access to special perks:youtube.com/channel/UCh2wZoBynUkHmTX2GOwAKKg/joinAlso, kindly consider subscribing to our channel if you liked the video: geni.us/SubscribeChannel Watch some of our other interesting manufacturing videos: How Plywood Is Made In Factories? youtu.be/3Wh9NYvfStkHow LUXURY Rolls-Royce Cars Are Made ? youtu.be/BVvnSzMqI3MHow Jigsaw Puzzles Are Made? youtu.be/nylElsB9MkE
How Oak Barrels Are Made in Cooperages? (Mega Factories Video) Engineering World 2021-04-09 | Oak Barrels have a convex shape and bulge at their center, called bilge. This facilitates rolling a well-built wooden barrel on its side and allows the roller to change directions with little friction, compared to a cylinder. It also helps to distribute stress evenly in the material by making the container more curved[. Barrels have reinforced edges to enable safe displacement by rolling them at an angle (in addition to rolling on their sides as described).The wooden parts that make up a barrel are called staves, the top and bottom are both called heads or headers, and the rings that hold the staves together are called hoops. These are usually made of galvanized iron, though historically they were made of flexible bits of wood called withies. While wooden hoops could require barrels to be "fully hooped", with hoops stacked tightly together along the entire top and bottom third of a barrel, iron-hooped barrels only require a few hoops on each end.Wine barrels typically come in two hoop configurations. An American barrel features 6 hoops, from top to center: head- or chime hoop, quarter hoop and bilge hoop (times two), while a French barrel features 8, including a so-called French hoop, located between the quarter- and bilge hoops (see "wine barrel parts" illustration). The opening at the center of a barrel is called a bung hole and the stopper used to seal it is a bung. The latter is generally made of white silicone.Video Credits: www.tonnelleriesaintmartin.comThis video is part of our ‘How Everyday Things are Made’ series. To watch other video of the series click on this link: youtube.com/playlist?list=PLmHzFWJOOSAoI1i6R-YMCdVIDmMDjBV40Join 'Engineering World' like many others to get access to special perks:youtube.com/channel/UCh2wZoBynUkHmTX2GOwAKKg/joinAlso, kindly consider subscribing to our channel if you liked the video: geni.us/SubscribeChannel Watch some of our other interesting manufacturing videos: How Plywood Is Made In Factories? youtu.be/3Wh9NYvfStkHow LUXURY Rolls-Royce Cars Are Made ? youtu.be/BVvnSzMqI3MHow Jigsaw Puzzles Are Made? youtu.be/nylElsB9MkE
How Highlighters Are Made? (Mega Factories Video) Engineering World 2021-04-02 | Schwan-STABILO is a German maker of pens for writing, colouring and cosmetics as well as markers and highlighters for office use. It is the world's largest manufacturer of highlighter pens, Stabilo Boss.The Schwan-Stabilo Group is a German corporate group based in Heroldsberg. Established in 1855, the company is made up of two private manufacturing companies, "Schwan Cosmetics International GmBH" (maker of cosmetics) and "Stabilo International GmbH" (maker of stationery products).Schwan-Stabilo has three divisions for its business operations, they are "Writing instruments" (Stabilo), "Cosmetics" (Schwan Cosmetics), and the most recent, "Outdoor", with four subsidiaries makers of outdoor recreation equipment acquired in the 2010s, they are: Deuter Sport GmBH (backpacks), Ortovox (mountaineering), Maier Sports (skiing), and former Maier's brand Gonso (cycling)In 2011, Schwan-Stabilo acquired Ortovox Sportartikel GmbH, a manufacturer of mountaineering equipment headquartered in Taufkirchen, as part of the consistent expansion of the company's Outdoor division. By the time, Ortovox had subsidiaries in Austria, US and Canada, and was present in 30 countries around the world. Schwan Cosmetics expanded its operations in the US with a new head office in Murfreesboro in 2015. That same year, Schwan-Stabilo added Maier Sports GmbH (and its brand Gonso), a skiing clothes equipment manufacturer, with 160 employees at the time of acquisition. Maier added to Schwan-Stabilo's portfolio of Outdoor brands.Video Credit: www.stabilo.com This video is part of our ‘How Everyday Things are Made’ series. To watch other video of the series click on this link: youtube.com/playlist?list=PLmHzFWJOOSAoI1i6R-YMCdVIDmMDjBV40Join 'Engineering World' like many others to get access to special perks:youtube.com/channel/UCh2wZoBynUkHmTX2GOwAKKg/joinAlso, kindly consider subscribing to our channel if you liked the video: geni.us/SubscribeChannel Watch some of our other interesting manufacturing videos: How Plywood Is Made In Factories? youtu.be/3Wh9NYvfStkHow LUXURY Rolls-Royce Cars Are Made ? youtu.be/BVvnSzMqI3MHow Jigsaw Puzzles Are Made? youtu.be/nylElsB9MkE
How Electric Vans Are Made in Factories? (Mega Factories Video) Engineering World 2021-03-26 | The Mercedes-Benz Sprinter is a light commercial vehicle (van) built by Daimler AG of Stuttgart, Germany as a large van, chassis cab, minibus, and pickup truck. In the past the Sprinter has been sold under the Mercedes-Benz, Dodge, Freightliner, and Volkswagen nameplates. In the U.S. it is built from complete knock down (CKD) kits by Freightliner. They are now primarily marketed by Mercedes-Benz. Re-badged and re-engined Sprinters were also sold by Volkswagen Commercial Vehicles as the Volkswagen LT and the Volkswagen Crafter.Companies are replacing van conversions with wide bus bodies—Sprinters with side-facing benches and tall right-side doors—as campus shuttles. Limited numbers of complete "wagons" (passenger vans) are being produced in Germany and shipped complete to the United States mostly for personal and church van uses. Typical Sprinter Wagons accommodate 8 to 10 passengers and have glass in all possible factory positions. Vans shipped to the United States on-spec (speculation to sell by dealer/distributor) are mostly sent in Arctic White color, but many colors are available. The Dodge dealer network for Sprinters is limited to certified locations (known as "Business Link" certified dealers, usually only awarded to "Five Star" certified dealers), and dealer knowledge is still limited in both sales and service.Video Credit: www.mercedes.com This video is part of our ‘How Everyday Things are Made’ series. To watch other video of the series click on this link: youtube.com/playlist?list=PLmHzFWJOOSAoI1i6R-YMCdVIDmMDjBV40Join 'Engineering World' like many others to get access to very special perks:youtube.com/channel/UCh2wZoBynUkHmTX2GOwAKKg/joinAlso, kindly consider subscribing to our channel if you liked the video: geni.us/SubscribeChannel Watch some of our other interesting manufacturing videos: How Plywood Is Made In Factories? youtu.be/3Wh9NYvfStkHow LUXURY Rolls-Royce Cars Are Made ? youtu.be/BVvnSzMqI3MHow Jigsaw Puzzles Are Made? youtu.be/nylElsB9MkE
How EXPENSIVE Yachts Are Made in Factories? (Mega Factories Video) Engineering World 2021-03-19 | A yacht is a sail or power vessel used for pleasure, cruising, or racing. There is no standard definition, so the term applies to such vessels that have a cabin with amenities that accommodate overnight use. To be termed a yacht, as opposed to a boat, such a pleasure vessel is likely to be at least 33 feet (10 m) in length and may have been judged to have good aesthetic qualities.Originally, all yachts were made of wood, using a wooden keel and ribs, clad with planks. These materials were supplanted with iron or steel in steam yachts. In the 1960s fiberglass became a prevalent material. These materials and others continue in use. Whereas yachts of 79 feet (24 m) and below may be constructed of fiberglass, larger yachts are more likely to be constructed of steel, aluminum or composite fiber-reinforced plastic.- Wood construction, using conventional planks over ribs continues. Hard-chined boats made with plywood is an infrequent technique. Whereas yachts made with the WEST system—plies of wood strips, soaked in epoxy and applied over the boat frame—provide a durable, lightweight and robust hull.- Metal hulls from steel or aluminum offer the opportunity for welding components to a completely watertight hull. Both metals are vulnerable to damage due to electrolysis. Steel is easy to repair in boatyards around the world, whereas aluminum is a much lighter material.- Fiberglass construction is best suited for mass-produced yachts, using a mold and is therefore the most prevalent material. Fiberglass skins comprise plies of roving (glass fabric) and matting, soaked in resin for the hull. Decks typically have a core of balsa or PVC foam between layers of glass mat. Both elements of construction are vulnerable to intrusion of water and the development of blisters.Video Credit: www.bavariayachts.comThis video is part of our ‘How Everyday Things are Made’ series. To watch other video of the series click on this link: youtube.com/playlist?list=PLmHzFWJOOSAoI1i6R-YMCdVIDmMDjBV40 Join 'Engineering World' like many others to get access to very special perks:youtube.com/channel/UCh2wZoBynUkHmTX2GOwAKKg/joinAlso, kindly consider subscribing to our channel if you liked the video: geni.us/SubscribeChannel Watch some of our other interesting manufacturing videos: How Plywood Is Made In Factories? youtu.be/3Wh9NYvfStkHow LUXURY Rolls-Royce Cars Are Made ? youtu.be/BVvnSzMqI3MHow Jigsaw Puzzles Are Made? youtu.be/nylElsB9MkE
How Lollipops Are Made in Factories? (Mega Factories Video) Engineering World 2021-03-05 | A lollipop is a type of sugar candy usually consisting of hard candy mounted on a stick and intended for sucking or licking. Different informal terms are used in different places, including lolly, sucker, sticky-pop, etc. Lollipops are available in many flavors and shapes.Although the main functional ingredients of a lollipop are quite simple, the actual process of making this product is where things start to get complicated. It has already been stated that a glassy amorphous structure is a non-crystalline solid. However, the formation and physical state of this glass has a lot of chemistry and physics behind it. The first step in making lollipops after mixing the main ingredients is the heating process. During heating, the molecules increase in their translational mobility and therefore become liquid-like.[11] Although it can be found that many hard candies are heated to about 310˚F, the temperature that the solution is heated to is dependent on the specific volume and contents of the mixture. After heating is complete, the solution can then be cooled. The final cooled solution is a supersaturated due to the fact that the moisture content drops to below 2%. Supersaturated or supercooled liquids are also formed due to the fact that crystallization is being inhibited. They are unstable because crystallization is a favored reaction in this case. During the cooling process, the most important physicochemical characteristic of lollipops is occurring. This process is called glass transition.Video Credits: www.heartlandcandies.comThis video is part of our ‘How Everyday Things are Made’ series. To watch other video of the series click on this link: youtube.com/playlist?list=PLmHzFWJOOSAoI1i6R-YMCdVIDmMDjBV40Join 'Engineering World' like many others to get access to very special perks:youtube.com/channel/UCh2wZoBynUkHmTX2GOwAKKg/joinAlso, kindly consider subscribing to our channel if you liked the video: geni.us/SubscribeChannel Watch some of our other interesting manufacturing videos: How Plywood Is Made In Factories? youtu.be/3Wh9NYvfStkHow LUXURY Rolls-Royce Cars Are Made ? youtu.be/BVvnSzMqI3MHow Jigsaw Puzzles Are Made? youtu.be/nylElsB9MkE
How Chocolate is Made in Factories? (Mega Factories Video) Engineering World 2021-02-26 | There have been more than 300 limited-edition seasonal and regional flavors of Kit Kat chocolate bars produced in Japan since 2000, many exclusive to the country and not produced elsewhere.Nestlé, which operates the Kit Kat brand in Japan, reports that the brand overtook Meiji Chocolate as the top-selling confection in Japan from 2012 to 2014.The company's marketing campaign, which partnered with Japan Post to sell the bar in 20,000 post offices, won an award in 2010.The campaign encouraged associations of the product's name with the coincidental cognate Kitto Katsu (きっと勝つ), translated as "You will surely win", and could be mailed as a good luck charm for students ahead of university exams. Kit Kats were introduced to Japan in 1973 when British confectioner Rowntree's made an agreement with Japanese confectioner and restaurant owner Fujiya. In 2014, they were the top-selling confection in the country. The Kit Kat brand took the number one sales position from Meiji chocolate in 2012, though Meiji remains the leading confection company in Japan overall.Kit Kats in Japan are produced at Nestlé-owned factories in Himeji and Kasumigaura. The milk chocolate used for Kit Kats is made from whole-milk powder and Nestlé buys most of its cacao beans from West Africa.This video is part of our ‘How Everyday Things are Made’ series. To watch other video of the series click on this link: youtube.com/playlist?list=PLmHzFWJOOSAoI1i6R-YMCdVIDmMDjBV40Join 'Engineering World' like many others to get access to very special perks:youtube.com/channel/UCh2wZoBynUkHmTX2GOwAKKg/joinAlso, kindly consider subscribing to our channel if you liked the video: geni.us/SubscribeChannel Watch some of our other interesting manufacturing videos: How Plywood Is Made In Factories? youtu.be/3Wh9NYvfStkHow LUXURY Rolls-Royce Cars Are Made ? youtu.be/BVvnSzMqI3MHow Jigsaw Puzzles Are Made? youtu.be/nylElsB9MkE
How BMW Electric Batteries Are Made for Electric Cars? (Mega Factories Video) Engineering World 2021-02-19 | An electric-vehicle battery (EVB) (also known as a traction battery) is a battery used to power the electric motors of a battery electric vehicle (BEV) or hybrid electric vehicle (HEV). These batteries are usually rechargeable (secondary) batteries, and are typically lithium-ion batteries. These batteries are specifically designed for a high ampere-hour (or kilowatt-hour) capacity.Batteries for electric vehicles are characterized by their relatively high power-to-weight ratio, specific energy and energy density; smaller, lighter batteries are desirable because they reduce the weight of the vehicle and therefore improve its performance. Compared to liquid fuels, most current battery technologies have much lower specific energy, and this often impacts the maximum all-electric range of the vehicles.The most common battery type in modern electric vehicles are lithium-ion and lithium polymer, because of their high energy density compared to their weight. Other types of rechargeable batteries used in electric vehicles include lead–acid, nickel-cadmium, nickel–metal hydride, and, less commonly, zinc–air, and sodium nickel chloride batteries. The amount of electricity stored in batteries is measured in ampere hours or in coulombs, with the total energy often measured in kilowatt-hours.Video Credit: www.bmw.comThis video is part of our ‘How Everyday Things are Made’ series. To watch other video of the series click on this link: youtube.com/playlist?list=PLmHzFWJOOSAoI1i6R-YMCdVIDmMDjBV40Join 'Engineering World' like many others to get access to very special perks:youtube.com/channel/UCh2wZoBynUkHmTX2GOwAKKg/joinAlso, kindly consider subscribing to our channel if you liked the video: geni.us/SubscribeChannel Watch some of our other interesting manufacturing videos: How Plywood Is Made In Factories? youtu.be/3Wh9NYvfStkHow LUXURY Rolls-Royce Cars Are Made ? youtu.be/BVvnSzMqI3MHow Jigsaw Puzzles Are Made? youtu.be/nylElsB9MkE
How Audi Electric Motors Are Made for Electric Cars? (Mega Factories Video) Engineering World 2021-02-12 | The Audi e-tron is a series of electric and hybrid cars shown by Audi from 2009 onwards and powered by Electric Engines. In 2012 Audi unveiled a plug-in hybrid version, the A3 Sportback e-tron, released to retail customers in Europe in August 2014, and slated for the U.S. in 2015. A decade after the unveiling of the first e-tron concept at the 2009 International Motor Show Germany, Audi's first fully electric e-tron SUV went into production in 2019.The e-tron GT is a four-door all-electric grand tourer unveiled at the 2018 Los Angeles Auto Show. It will be built on the same platform as the Porsche Taycan. It is fitted with an 800-volt system, which substantially reduces charging times. The vehicle is driven by two permanently excited synchronous electric motors with a combined power output of 434 kW (582 hp). A 90-kWh lithium-ion battery powers the e-tron GT's electric engines and enables it to travel up to 248.5 miles (400 km) according to the new WLTP standard. Video Credits: www.audi.com This video is part of our ‘How Everyday Things are Made’ series. To watch other video of the series click on this link: youtube.com/playlist?list=PLmHzFWJOOSAoI1i6R-YMCdVIDmMDjBV40Join 'Engineering World' like many others to get access to very special perks:youtube.com/channel/UCh2wZoBynUkHmTX2GOwAKKg/joinAlso, kindly consider subscribing to our channel if you liked the video: geni.us/SubscribeChannel Watch some of our other interesting manufacturing videos: How Plywood Is Made In Factories? youtu.be/3Wh9NYvfStkHow LUXURY Rolls-Royce Cars Are Made ? youtu.be/BVvnSzMqI3MHow Jigsaw Puzzles Are Made? youtu.be/nylElsB9MkE
How Jigsaw Puzzles Are Made? (Mega Factories Video) Engineering World 2021-02-05 | A jigsaw puzzle is a tiling puzzle that requires the assembly of often oddly shaped interlocking and mosaiced pieces. Typically, each individual piece has a portion of a picture; when assembled, the jigsaw puzzle produces a complete picture.Most modern jigsaw puzzles are made out of paperboard since they are easier and cheaper to mass-produce than the original wooden models. An enlarged photograph or printed reproduction of a painting or other two-dimensional artwork is glued onto the cardboard before cutting. This board is then fed into a press. The press forces a set of hardened steel blades of the desired shape through the board until it is fully cut. This procedure is similar to making shaped cookies with a cookie cutter. The forces involved, however, are tremendously greater and a typical 1000-piece puzzle requires a press that can generate upwards of 700 tons of force to push the knives of the puzzle die through the board. A puzzle die is a flat board, often made from plywood, which has slots cut or burned in the same shape as the knives that are used. These knives are set into the slots and covered in a compressible material, typically foam rubber, which serves to eject the cut puzzle pieces.New technology has enabled laser-cutting of wooden or acrylic jigsaw puzzles. The advantage of cutting with a laser is that the puzzle can be custom cut into any size, any shape, with any size (or any number) of pieces. Many museums have laser cut acrylic puzzles made of some of their more important pieces of art so that children visiting the museum can see the original piece and then assemble a jigsaw puzzle of the image that is also in the same shape as the piece of art. Acrylic is used because the pieces are very durable, waterproof, and can withstand continued use without the image fading, or the pieces wearing out, or becoming frayed. Also, because the print and cut patterns are computer-based, lost pieces can be manufactured without remaking the entire puzzle.Video Credit: www.ravensburger.com & www.clementoni.com This video is part of our ‘How Everyday Things are Made’ series. To watch other video of the series click on this link: youtube.com/playlist?list=PLmHzFWJOOSAoI1i6R-YMCdVIDmMDjBV40Join 'Engineering World' like many others to get access to very special perks:youtube.com/channel/UCh2wZoBynUkHmTX2GOwAKKg/joinAlso, kindly consider subscribing to our channel if you liked the video: geni.us/SubscribeChannel Watch some of our other interesting manufacturing videos: How Plywood Is Made In Factories? youtu.be/3Wh9NYvfStkHow LUXURY Rolls-Royce Cars Are Made ? youtu.be/BVvnSzMqI3MHow Pencils are made in Factories?youtu.be/XpzJNVCfy2U
How All-Terrain Vehicles are Made ? (Mega Factories Video) Engineering World 2021-01-29 | An all-terrain vehicle (ATV), also known as a light utility vehicle (LUV), a quad bike, or simply a quad, as defined by the American National Standards Institute (ANSI); is a vehicle that travels on low-pressure tires, with a seat that is straddled by the operator, along with handlebars for steering control. As the name implies, it is designed to handle a wider variety of terrain than most other vehicles. Although it is a street-legal vehicle in some countries, it is not street-legal within most states, territories, and provinces of Australia, the United States or Canada.By the current ANSI definition, ATVs are intended for use by a single operator, although some companies have developed ATVs intended for use by the operator and one passenger. These ATVs are referred to as tandem ATVs. The rider sits on and operates these vehicles like a motorcycle, but the extra wheels give more stability at slower speeds. Although most are equipped with three or four wheels, six-wheel models exist for specialized applications. Multiple-user analogues with side-by-side seating are called utility terrain vehicles (UTVs) or side-by-sides to distinguish the classes of vehicle. Both classes tend to have similar powertrain parts. Engine sizes of ATVs currently for sale in the United States (as of 2008 products) range from 49 to 1,000 cc (3.0 to 61 cu in).Video credit: www.honda.com This video is part of our ‘How Everyday Things are Made’ series. To watch other video of the series click on this link: youtube.com/playlist?list=PLmHzFWJOOSAoI1i6R-YMCdVIDmMDjBV40Join 'Engineering World' like many others to get access to very special perks:youtube.com/channel/UCh2wZoBynUkHmTX2GOwAKKg/joinAlso, kindly consider subscribing to our channel if you liked the video: geni.us/SubscribeChannel Watch some of our other interesting manufacturing videos: How Plywood Is Made In Factories? youtu.be/3Wh9NYvfStkHow LUXURY Rolls-Royce Cars Are Made ? youtu.be/BVvnSzMqI3MHow Jigsaw Puzzles Are Made? youtu.be/nylElsB9MkE
How LUXURY Bus Are Made ? (Mega Factories Video) Engineering World 2021-01-22 | Mercedes-Benz has been producing buses since 1895 in Mannheim in Germany. Since 1995, the brand of Mercedes-Benz buses and coaches is under the umbrella of EvoBus GmbH, belonging 100% to the Daimler AG.In 1995 Daimler-Benz Bus and Coach range and Kässbohrer Bus Division were combined to form the EvoBus GmbH. Both Mercedes-Benz and Setra continued to operate separately on the market for some time.Coordinated production between Setra and Mercedes-Benz started in 1997. New versions of the Citaro low-floor bus were presented that year, including a 15-metre three-axle version and an 18-metre articulated version. In 1998 the new Mercedes-Benz Tourismo (O350) was presented in a super-high-deck version with three-axles, based on the O404 coach chassis. The O404 integral bus was succeeded by the Travego in 1999. The Travego was available either with a six-cylinder in-line engine (initially delivering 354 and 408 hp) or with a V8 engine (delivering 476 hp).Currently Mercedes-Benz concentrates the integral bus production in Germany and Turkey, and chassis production in Spain and Brazil. There are other manufacturing basis around the world, such as the ones in France and Argentina.Video credit: www.mercedes-benz.comThis video is part of our ‘How Everyday Things are Made’ series. To watch other video of the series click on this link: youtube.com/playlist?list=PLmHzFWJOOSAoI1i6R-YMCdVIDmMDjBV40Join 'Engineering World' like many others to get access to very special perks:youtube.com/channel/UCh2wZoBynUkHmTX2GOwAKKg/joinAlso, kindly consider subscribing to our channel if you liked the video: geni.us/SubscribeChannel Watch some of our other interesting manufacturing videos: How Plywood Is Made In Factories? youtu.be/3Wh9NYvfStkHow LUXURY Rolls-Royce Cars Are Made ? youtu.be/BVvnSzMqI3MHow Jigsaw Puzzles Are Made? youtu.be/nylElsB9MkE
How HUGE Trucks Are Made ? (Mega Factories Video) Engineering World 2021-01-15 | Scania develops, manufactures and sells trucks with a gross vehicle weight rating (GVWR) of more than 16 tonnes (Class 8), intended for long-distance haulage, regional, and local distribution of goods, as well as construction haulage.The 1963 forward-control LB76 forged Scania-Vabis's reputation outside Sweden, being one of the first exhaustively crash-tested truck cabs. All current trucks from Scania are part of the PRT-range, but are marketed as different series based on the general cab height.The L-series was launched in December 2017. It has an even lower cab than the P-series, and is optimised for distribution and other short-haul duties. P-series which was launched in August 2004, typical applications are regional and local distribution, construction, and various specialised operations associated with locally based transportation and services. P-series trucks have the new P cabs, which are available in several variations: a single-berth sleeper, a spacious day cab, a short cab and a crew cab. G-series launched in September 2007, the series offer an enlarged range of options for operators engaged in national long haul and virtually all types of construction applications. All models have a G cab, and each is available as a tractor or rigid. The G-series truck comes with five cab variants: three sleepers, a day cab and a short cab. There are different axle configurations, and in most cases a choice of chassis height and suspension. R-series launched in March 2004, and won the prestigious International Truck of the Year award in 2005 and again in 2010. The range offers various trucks optimised for long haulage. All models have a Scania R cab, and each vehicle is available as a tractor or rigid. There are different axle configurations and a choice of chassis height and suspension. The Scania R 730 is the most powerful variant of the R-series. Its 16.4-litre DC16 Turbo Diesel V8 engine produces 730 PS (540 kW; 720 hp) at 1,900 rpm and 3,500 N⋅m (2,600 lb⋅ft) of torque at 1,000–1,350 rpm. S-series launched in August 2016. It is the highest cab Scania has ever built. It features a completely flat floor and a low bed that is extendable up to 100 cm (about 3.28 feet).Video credits: www.scania.com This video is part of our ‘How Everyday Things are Made’ series. To watch other video of the series click on this link: youtube.com/playlist?list=PLmHzFWJOOSAoI1i6R-YMCdVIDmMDjBV40Join 'Engineering World' like many others to get access to very special perks:youtube.com/channel/UCh2wZoBynUkHmTX2GOwAKKg/joinAlso, kindly consider subscribing to our channel if you liked the video: geni.us/SubscribeChannel Watch some of our other interesting manufacturing videos: How Plywood Is Made In Factories? youtu.be/3Wh9NYvfStkHow LUXURY Rolls-Royce Cars Are Made ? youtu.be/BVvnSzMqI3MHow Jigsaw Puzzles Are Made? youtu.be/nylElsB9MkE
How LUXURY Rolls-Royce Cars Are Made ? (Mega Factories Video) Engineering World 2021-01-08 | Rolls-Royce Motor Cars Limited is a British luxury automobile maker. A wholly owned subsidiary of German group BMW, it was established in 1998 after BMW was licensed the rights to the Rolls-Royce brand name and logo from Rolls-Royce plc and acquired the rights to the Spirit of Ecstasy and Rolls-Royce grill shape trademarks from Volkswagen AG. Rolls-Royce Motor Cars Limited operates from purpose-built administrative and production facilities opened in 2003 across from the historic Goodwood Circuit in Goodwood, West Sussex, England, United Kingdom. Rolls-Royce Motors Cars Limited is the exclusive manufacturer of Rolls-Royce branded motor cars since 2003.Although the Rolls-Royce brand has been in use since 1906, the Rolls-Royce Motor Cars subsidiary of BMW AG has no direct relationship to Rolls-Royce-branded vehicles produced prior to 2003 other than being a major engine and other supplier prior to 2003. The Bentley Motors Limited subsidiary of Volkswagen AG is the direct successor to Rolls-Royce Motors and various other predecessor entities that produced Rolls-Royce and Bentley branded cars between the foundation of each company and 2003, when the BMW-controlled entity started producing cars under the Rolls-Royce brandVideo Credit: www.rolls-roycemotorcars.comThis video is part of our ‘How Everyday Things are Made’ series. To watch other video of the series click on this link: youtube.com/playlist?list=PLmHzFWJOOSAoI1i6R-YMCdVIDmMDjBV40Join 'Engineering World' like many others to get access to very special perks:youtube.com/channel/UCh2wZoBynUkHmTX2GOwAKKg/joinAlso, kindly consider subscribing to our channel if you liked the video: geni.us/SubscribeChannel Watch some of our other interesting manufacturing videos: How Plywood Is Made In Factories? youtu.be/3Wh9NYvfStkHow Engines are made?youtu.be/SH_unRLBRw4How Jigsaw Puzzles Are Made? youtu.be/nylElsB9MkE
How FAST Sport Cars Are Made ? (Mega Factories Video) Engineering World 2020-12-30 | Ferrari is an Italian luxury sports car manufacturer based in Maranello, Italy. Founded by Enzo Ferrari in 1939 out of the Alfa Romeo race division as Auto Avio Costruzioni, the company built its first car in 1940. However, the company's inception as an auto manufacturer is usually recognized as 1947, when the first Ferrari-badged car was completed.Throughout its history, the company has been noted for its continued participation in racing, especially in Formula One, where it is the oldest and most successful racing team, holding the most constructors championships and having produced the highest number of drivers' championship wins .Ferrari road cars are generally seen as a symbol of speed, luxury and wealth. Ferrari cars are built at the 165,000 square-meter (16.5-hectare) Maranello factory.In 2014 Ferrari was rated the world's most powerful brand by Brand Finance.[12] In June 2018, the 1963 250 GTO became the most expensive car in history, setting an all-time record selling price of $70 million.The famous symbol of the Ferrari race team is the Cavallino Rampante ("prancing horse") black prancing stallion on a yellow shield, usually with the letters S F (for Scuderia Ferrari), with three stripes of green, white and red (the Italian national colors) at the top. The road cars have a rectangular badge on the hood (see picture at top of page), and, optionally, the shield-shaped race logo on the sides of both front wings, close to the door.Video Credits: www.ferrari.comThis video is part of our ‘How Everyday Things are Made’ series. To watch other video of the series click on this link: youtube.com/playlist?list=PLmHzFWJOOSAoI1i6R-YMCdVIDmMDjBV40Join 'Engineering World' like many others to get access to very special perks:youtube.com/channel/UCh2wZoBynUkHmTX2GOwAKKg/joinAlso, kindly consider subscribing to our channel if you liked the video: geni.us/SubscribeChannel Watch some of our other interesting manufacturing videos: How Plywood Is Made In Factories? youtu.be/3Wh9NYvfStkHow LUXURY Rolls-Royce Cars Are Made ? youtu.be/BVvnSzMqI3MHow Jigsaw Puzzles Are Made? youtu.be/nylElsB9MkE
How Gas Cylinders Are Made? (Mega Factories Video) Engineering World 2020-12-20 | If you are wondering how gas or propane cylinders are made, the ones we use in our kitchen or at work place you have come to the right video to learn exactly the same. In this video we go step by step in the process of how gas cylinders are manufactured and the different steps involved.A gas cylinder is a pressure vessel for storage and containment of gases at above atmospheric pressure. High-pressure gas cylinders are also called bottles. Inside the cylinder the stored contents may be in a state of compressed gas, vapor over liquid, supercritical fluid, or dissolved in a substrate material, depending on the physical characteristics of the contents. A typical gas cylinder design is elongated, standing upright on a flattened bottom end, with the valve and fitting at the top for connecting to the receiving apparatus.The whole manufacturing process consists of the following steps:1. Blanking & Body Forming 2. Valve Guard Ring & Foot Ring Production 3. Valve Neck (Valve Boss or Neck Ring) Production4. Welding, Heat Treatment and Hydrostatic Testing5. Surface Coating6. Finishing Line with Pneumatic Testing7. Valve ProductionLPG Cylinder Production is composed of several sheet metal forming, surface treatment and testing processes. The process starts with blanking, deep drawing and piercing, trimming and joggling. Next are the welding operations for valve boss, valve guard ring, foot ring and the two halves. The finished cylinder is then heat treated, tested, shot blasted, painted and then the valve is attached and final tested.Video Credits: www.repkon.com.tr This video is part of our ‘How Everyday Things are Made’ series. To watch other video of the series click on this link: youtube.com/playlist?list=PLmHzFWJOOSAoI1i6R-YMCdVIDmMDjBV40Join 'Engineering World' like many others to get access to very special perks:youtube.com/channel/UCh2wZoBynUkHmTX2GOwAKKg/joinAlso, kindly consider subscribing to our channel if you liked the video: geni.us/SubscribeChannel Watch some of our other interesting manufacturing videos: How Plywood Is Made In Factories? youtu.be/3Wh9NYvfStkHow LUXURY Rolls-Royce Cars Are Made ? youtu.be/BVvnSzMqI3MHow Jigsaw Puzzles Are Made? youtu.be/nylElsB9MkE
4 AMAZING Military Ship Launch Videos (Do They Sink?) Engineering World 2020-11-13 | Ceremonial ship launching is the process of transferring a vessel to the water. It is a naval tradition in many cultures, dating back thousands of years. It has been observed as a public celebration and a solemn blessing.Ship launching imposes stresses on the ship not met during normal operation and, in addition to the size and weight of the vessel, represents a considerable engineering challenge as well as a public spectacle. The process also involves many traditions intended to invite good luck, such as christening by breaking a sacrificial bottle of champagne over the bow as the ship is named aloud and launched.Some slipways are built so that the vessel is side-on to the water and is launched sideways. This is done where the limitations of the water channel would not allow lengthwise launching, but occupies a much greater length of shore. The Great Eastern designed by Brunel was built this way as were many landing craft during World War II. This method requires many more sets of ways to support the weight of the ship.Military combat ships are among the few ships in the world that are launched sideways. This method is generally used because of the size of the ship and the capabilities of the shipyard which allows for a side launch.Join 'Engineering World' like many others to get access to very special perks:youtube.com/channel/UCh2wZoBynUkHmTX2GOwAKKg/joinAlso, kindly consider subscribing to our channel if you liked the video: geni.us/SubscribeChannel Watch some of our other interesting videos: Are Wind Turbines really Environmentally Friendly? Link: youtu.be/MVHzfUWul2Y Which is the best seaplane ever made? Link: youtu.be/XNQ9hnJMiY8Can SpaceX rockets really land from the space? Link: youtu.be/aH9JQ4Kash0
SpaceX Rocket Landing From Space in 4K Video (FOR REAL?) Engineering World 2020-09-12 | This is a sped up footage of the #SpaceX rocket Falcon 9 which was launched from the Complex 40 at Cape Canaveral Air Force Station and successfully touched down at Landing Zone 1. What’s amazing about this video is the way the complex on board systems work together to make sure that the rocket lands safely back on Earth. You can hear the sound of the turbines, pulsing of the RCS and yes the sound of the wind as well. We have rendered the original 360p video into 4K to make it look more sharp and clear, hope you all like it! There is some strange object which appears at 0:49 of the video, can you guess what it could be? Original video: @SpaceX youtube.com/watch?v=lXgLyCYuYA4&ab_channel=SpaceXJoin 'Engineering World' like many others to get access to very special perks:youtube.com/channel/UCh2wZoBynUkHmTX2GOwAKKg/joinAlso, kindly consider subscribing to our channel if you liked the video: geni.us/SubscribeChannel Watch some of our other interesting videos: Are Wind Turbines really Environmentally Friendly? Link: youtu.be/MVHzfUWul2Y Which is the best seaplane ever made? Link: youtu.be/XNQ9hnJMiY8Can SpaceX rockets really land from the space? Link: youtu.be/aH9JQ4Kash0
Worlds MOST POWERFUL Rocket Test Video (Successful Test?) Engineering World 2020-09-04 | The full-scale booster firing was conducted with new materials and processes that may be used for NASA’s Space Launch System (SLS) rocket boosters. NASA and Northrop Grumman, the SLS boosters lead contractor, will use data from the test to evaluate the motor’s performance using potential new materials and processes for Artemis missions beyond the initial Moon landing in 2024.The SLS boosters are the largest, most powerful boosters ever built for flight. The two boosters on the rocket provide more than 75% of the thrust needed to launch NASA’s future deep space missions through NASA’s Artemis lunar program. Northrop Grumman is the lead contractor for the SLS boosters.For a little over two minutes — the same amount of time that the boosters power the SLS rocket during liftoff and flight for each Artemis mission — the five-segment flight support booster fired in the Utah desert, producing more than 3 million pounds of thrust.NASA and Northrop Grumman have previously completed three development motor tests and two qualification motor tests. Today’s test, called Flight Support Booster-1 (FSB-1), builds on prior tests with the introduction of propellant ingredients from new suppliers for boosters on SLS rockets to support flights after Artemis III.Join 'Engineering World' like many others to get access to very special perks:youtube.com/channel/UCh2wZoBynUkHmTX2GOwAKKg/joinAlso, kindly consider subscribing to our channel if you liked the video: geni.us/SubscribeChannel Watch some of our other interesting videos: Are Wind Turbines really Environmentally Friendly? Link: youtu.be/MVHzfUWul2Y Which is the best seaplane ever made? Link: youtu.be/XNQ9hnJMiY8Can SpaceX rockets really land from the space? Link: youtu.be/aH9JQ4Kash0
SpaceX’s First Starship SN5 150m Hop Test Flight Video (Is Mars Near?) Engineering World 2020-08-16 | The SpaceX Starship is a fully-reusable launch vehicle and spacecraft that is being privately developed by SpaceX. It is designed to be a long-duration cargo and passenger-carrying spacecraft. The development of the Starship began around 2012.While the Starship program had only a small development team during the early years, and a larger development and build team since late 2018, Musk made Starship the top SpaceX development priority following the first human spaceflight launch of Crew Dragon in May 2020, except for anything related to reduction of crew return risk.In March 2020, Musk had set "an aspirational goal" of using SN5 or SN6 to conduct an orbital flight of Starship before the end of 2020. After a successful static fire test on 30 July 2020 SN5 completed a 150-meter flight on 4 August 2020. SN5 may have a second test flight to follow. #starship #hoptest #starshiphop #spacexJoin 'Engineering World' like many others to get access to very special perks:youtube.com/channel/UCh2wZoBynUkHmTX2GOwAKKg/joinAlso, kindly consider subscribing to our channel if you liked the video: geni.us/SubscribeChannel Watch some of our other interesting videos: Are Wind Turbines really Environmentally Friendly? Link: youtu.be/MVHzfUWul2Y Which is the best seaplane ever made? Link: youtu.be/XNQ9hnJMiY8Can SpaceX rockets really land from the space? Link: youtu.be/aH9JQ4Kash0Music by Bensound: bensound.com
8 AMAZING Disinfection Machines from Around the World (Are they Effective?) Engineering World 2020-04-09 | Sterilization drives are carried out to disinfect the public places from harmful microorganisms. The spray consists of a low concentration bleach-and-water solution. Cities around the world have taken up city-wide sterilization campaign to stop the airborne CV from spreading. But some experts have argued that wiping surfaces at hospitals and markets is a more worthwhile approach.Join 'Engineering World' like many others to get access to very special perks:youtube.com/channel/UCh2wZoBynUkHmTX2GOwAKKg/joinAlso, kindly consider subscribing to our channel if you liked the video: geni.us/SubscribeChannel Watch some of our other interesting videos: Are Wind Turbines really Environmentally Friendly? Link: youtu.be/MVHzfUWul2Y Which is the best seaplane ever made? Link: youtu.be/XNQ9hnJMiY8Can SpaceX rockets really land from the space? Link: youtu.be/aH9JQ4Kash0
Mars in 4K (What Did We Find?) Engineering World 2020-03-17 | It’s been more than 2700 days since the Mars Curiosity Rover landed on the surface of Mars with the goal to study about the Martian climate and more importantly to do an assessment if Mars offered environmental conditions favorable for microbial life including investigation of the role of water; and planetary habitability studies in preparation for human exploration. But the question is what we have actually found in the last 2648 Martian days.The quest for understanding the evolution of our Solar System continues and we are yet to address a large number of questions for which we are yet to get answers for. Hopefully Mars Curiosity will provide some of those answers but there is still much to learn about what lies above us on Mars, the fourth planet out from the Sun. Let’s find out more from this video. Join 'Engineering World' like many others to get access to very special perks:youtube.com/channel/UCh2wZoBynUkHmTX2GOwAKKg/joinAlso, kindly consider subscribing to our channel if you liked the video: geni.us/SubscribeChannel Watch some of our other interesting videos: Are Wind Turbines really Environmentally Friendly? Link: youtu.be/MVHzfUWul2Y Which is the best seaplane ever made? Link: youtu.be/XNQ9hnJMiY8Can SpaceX rockets really land from the space? Link: youtu.be/aH9JQ4Kash0Credit: NASAMusic by Bensound: bensound.comReference: engineeringworldchannel.com/mars-finding
5 AMAZING Ways to Save Electricity at Home Engineering World 2020-01-23 | Electricity is something which we can’t live without in this present day modern world. But like anything else in this world even electricity doesn’t come for free. So if you are struggling with your monthly electricity bills and at the same time want to contribute towards the protection against climate change then stay tune as we together explore some of the most innovative ways to save electricity and for you to have a piece of mind.Using less energy not only reduces your electricity bills, it also cuts down your carbon emissions, which is better for our planet and future generations. However, there are also all kinds of gadgets and energy-saving devices for homes that can help you reduce the amount of energy, heat or water you use – some more useful than others. So let’s explore about some of them in this video.Join 'Engineering World' like many others to get access to very special perks:youtube.com/channel/UCh2wZoBynUkHmTX2GOwAKKg/joinAlso, kindly consider subscribing to our channel if you liked the video: geni.us/SubscribeChannel Watch some of our other interesting videos: Are Wind Turbines really Environmentally Friendly? Link: youtu.be/MVHzfUWul2Y Which is the best seaplane ever made? Link: youtu.be/XNQ9hnJMiY8Can SpaceX rockets really land from the space? Link: youtu.be/aH9JQ4Kash0Credits: [1] youtube.com/watch?v=BCYZWgxM7cw – Xiomi Smart Power Strip [2] youtube.com/watch?v=4jp1axFycgQ – Google Nest Music by Bensound: bensound.com
Can United States Run on Solar Energy only? (Possible?) Engineering World 2020-01-17 | Critics suggests that there isn’t enough land in the US to power up the whole country using solar energy. While it may seem like an impractical question but let’s analysis what if it is actually possible to do so while ignoring practical constraints like storage and grid technology. Can solar energy actually power up the entire US whose annual consumption is 4,090 TWh as per 2017 statics.The notion of trying to run a huge nation on solar is more of a “thought experiment” than anything else. It’s definitely possible, but not logical to do so because it is not required to generate all US electricity this way because the country also has more than adequate wind power resources, some geothermal, some pumped hydro storage, and so on. There is no lack of clean, renewable energy resources to develop but the urgency which is required to accomplish more reliance on the renewable source of energy and thereby eliminate the use of fossil fuels for energy requirement.Join 'Engineering World' like many others to get access to very special perks:youtube.com/channel/UCh2wZoBynUkHmTX2GOwAKKg/joinAlso, kindly consider subscribing to our channel if you liked the video: geni.us/SubscribeChannel Watch some of our other interesting videos: Are Wind Turbines really Environmentally Friendly? Link: youtu.be/MVHzfUWul2Y Which is the best seaplane ever made? Link: youtu.be/XNQ9hnJMiY8Can SpaceX rockets really land from the space? Link: youtu.be/aH9JQ4Kash0Music by Bensound: bensound.com
Take Off Speed of a Plane in km/hr Engineering World 2019-11-09 | Takeoff is the phase of flight in which an aerospace vehicle leaves the ground and become airborne. This video was made using GoPro’s GPS Telemetry and the aircraft is a Airbus A320. For aircraft that take off horizontally, this usually involves starting with a transition from moving along the ground on a runway. For balloons, helicopters and some specialized fixed-wing aircraft (VTOL aircraft such as the Harrier), no runway is needed. Takeoff is the opposite of landing.The takeoff speed required varies with air density, aircraft gross weight, and aircraft configuration (flap or slat position, as applicable). Air density is affected by factors such as field elevation and air temperature. This relationship between temperature, altitude, and air density can be expressed as a density altitude, or the altitude in the International Standard Atmosphere at which the air density would be equal to the actual air density.Operations with transport category aircraft employ the concept of the takeoff V-Speeds, V1, VR and V2. These speeds are determined not only by the above factors affecting takeoff performance, but also by the length and slope of the runway and any peculiar conditions, such as obstacles off the end of the runway. Below V1, in case of critical failures, the takeoff should be aborted; above V1 the pilot continues the takeoff and returns for landing. After the co-pilot calls V1, he/she will call VR or "rotate," marking speed at which to rotate the aircraft. The VR for transport category aircraft is calculated such as to allow the aircraft to reach the regulatory screen height at V2 with one engine failed. Then, V2 (the safe takeoff speed) is called. This speed must be maintained after an engine failure to meet performance targets for rate of climb and angle of climb.Join 'Engineering World' like many others to get access to very special perks:youtube.com/channel/UCh2wZoBynUkHmTX2GOwAKKg/joinAlso, kindly consider subscribing to our channel if you liked the video: geni.us/SubscribeChannel Watch some of our other interesting videos: Are Wind Turbines really Environmentally Friendly? Link: youtu.be/MVHzfUWul2Y Which is the best seaplane ever made? Link: youtu.be/XNQ9hnJMiY8Can SpaceX rockets really land from the space? Link: youtu.be/aH9JQ4Kash0
How Gas Turbines Work? (Detailed Video) Engineering World 2019-02-09 | A gas turbine, also called a combustion turbine, is a type of continuous combustion, internal combustion engine. The main elements common to all gas turbine engines are:1. An upstream rotating gas turbine compressor;2. A combustor;3. A downstream turbine on the same shaft as the compressor.A fourth component is often used to increase efficiency (on turboprops and turbofans), to convert power into mechanical or electric form (on turboshafts and electric generators), or to achieve greater thrust-to-weight ratio (on afterburning engines).The working principle of a gas turbine is a Brayton cycle with air as the working fluid. Atmospheric air flows through the compressor that brings it to higher pressure. Energy is then added by spraying fuel into the air and igniting it so the combustion generates a high-temperature flow. This high-temperature high-pressure gas enters a turbine, where it expands down to the exhaust pressure, producing a shaft work output in the process. The turbine shaft work is used to drive the compressor; the energy that is not used for compressing the working fluid comes out in the exhaust gases that can be used to do external work, such as directly producing thrust in a turbojet engine, or rotating a second, independent turbine (known as a power turbine) which can be connected to a fan, propeller, or electrical generator. Join 'Engineering World' like many others to get access to very special perks:youtube.com/channel/UCh2wZoBynUkHmTX2GOwAKKg/joinAlso, kindly consider subscribing to our channel if you liked the video: geni.us/SubscribeChannel Watch some of our other interesting videos: Are Wind Turbines really Environmentally Friendly? Link: youtu.be/MVHzfUWul2Y Which is the best seaplane ever made? Link: youtu.be/XNQ9hnJMiY8Can SpaceX rockets really land from the space? Link: youtu.be/aH9JQ4Kash0
World’s BIGGEST Electrical Transformer Video Engineering World 2018-11-02 | The world’s first transformer, which Siemens developed and manufactured for high-voltage direct-current (HVDC) transmission systems with what is currently the highest transmission voltage of ± 1,100 kilovolts (kV). The workflows for manufacturing and testing this product were challenging due to the transformer’s extreme dimensions (LxWxH: 37.5 m x 12.0 m x 14.5 m) and shipped to China where the transformer will enable a high-voltage direct-current (HVDC) transmission with low losses over a record distance of 3,284 kilometers with a transmission capacity of 12 gigawatts.An HVDC converter converts electric power from high voltage alternating current (AC) to high-voltage direct current (HVDC), or vice versa. HVDC is used as an alternative to AC for transmitting electrical energy over long distances or between AC power systems of different frequencies. HVDC converters capable of converting up to two gigawatts (GW) and with voltage ratings of up to 1,100 kilovolts (kV) have been built, and even higher ratings are technically feasible. A complete converter station may contain several such converters in series and/or parallel.Almost all HVDC converters are inherently bi-directional; they can convert either from AC to DC (rectification) or from DC to AC (inversion). A complete HVDC system always includes at least one converter operating as a rectifier (converting AC to DC) and at least one operating as an inverter (converting DC to AC). Some HVDC systems take full advantage of this bi-directional property (for example, those designed for cross-border power trading, such as the Cross-Channel link between England and France). Others, for example those designed to export power from a remote power station such as the Itaipu scheme in Brazil, may be optimised for power flow in only one preferred direction. In such schemes, power flow in the non-preferred direction may have a reduced capacity or poorer efficiency.Join 'Engineering World' like many others to get access to very special perks:youtube.com/channel/UCh2wZoBynUkHmTX2GOwAKKg/joinAlso, kindly consider subscribing to our channel if you liked the video: geni.us/SubscribeChannel Watch some of our other interesting videos: Are Wind Turbines really Environmentally Friendly? Link: youtu.be/MVHzfUWul2Y Which is the best seaplane ever made? Link: youtu.be/XNQ9hnJMiY8Can SpaceX rockets really land from the space? Link: youtu.be/aH9JQ4Kash0
5 POWERFUL Snow Plow Trains Videos Engineering World 2018-09-21 | Snow can be a boon or bane but it definitely creates a huge challenge for the railway companies which are operating in countries which receive a massive amount of snowfall leading to delays and loss in economy since rail traffic comes to a halt. That’s where snow plow trains comes to the rescue! They are of three types: 1. Wedge Plow Train: The wedge plow or also know as Bucker plow was invented by the railway companies in the American West to deal with the problem. The Snow Plow Trains are basically attached with a wedge in front of a locomotive or a group of locomotive which forces the snow to the sides of the track therefore it requires a huge force due to the compression of the snow. 2. Snow Blower Train: As the name suggests, a snow blower is a machine which is fitted in front of the Snow Plow Trains for removing the snow off the tracks. 3. Rotary Snowplow: It consists of a large circular set of blades which is mounted in front of the Snow Plow Trains which basically cuts through the snow on the track ahead and force it though a channel behind the disk through a opening chute above the blade assembly. USA trains rotary snow plow are some of the best trains which helps in clearing snow off tracks. Swiss train snowblower are some of the big snow plows in action currently in the world which are used along with snow plow trucks. Apart from this they are also snow melter trains which helps to clear the tracks.Join 'Engineering World' like many others to get access to very special perks:youtube.com/channel/UCh2wZoBynUkHmTX2GOwAKKg/joinAlso, kindly consider subscribing to our channel if you liked the video: geni.us/SubscribeChannel Watch some of our other interesting videos: Are Wind Turbines really Environmentally Friendly? Link: youtu.be/MVHzfUWul2Y Which is the best seaplane ever made? Link: youtu.be/XNQ9hnJMiY8Can SpaceX rockets really land from the space? Link: youtu.be/aH9JQ4Kash0
Top 7 Russia World Cup Stadiums Videos (Beautiful Building?) Engineering World 2018-06-09 | With Russia World Cup 2018 starting, here is a compilation of the amazing world cup stadiums from different cities which are an engineering marvel. Here is more information about each of them : 1. Luzhniki Stadium, Moscow Capacity: 81,000: Stadium wise, Luzhniki Stadium is the jewel in the Russian crown for the 2018 World Cup. Built in 1956, it has a long, illustrious history of hosting events, like the 2008 Champions league Final between Manchester United and Chelsea. Recently modernised, it will no doubt continue to be the home of the national side. 2.Krestovsky Stadium, Saint Petersburg Capacity: 68134: The stadium took a decade to build, with huge costs too, but it is certainly spectacular. Zenit St Petersburg will move in after the tournament. 3.Fisht Olympic Stadium, Sochi Capacity: 47,659 : Fisht Stadium was built for the 2014 Winter Olympics and Paralympics, so is clearly capable of hosting big events. The removal of its roof to comply with FIFA regulations also cost a lot of money.4.Volgograd Arena, Volgograd Capacity: 45,5685.Kazan Arena, Kazan Capacity: 45,379: Designed by Populous, the same company that designed Wembley and the Emirates, the Kazan Arena is home to Rubin Kazan. It is a modern stadium but will be one of the oldest stadiums at the tournament because of new constructions. Has previously held football and athletics events, as well as the 2015 World Aquatic Championships where the football pitch was replaced by swimming pools. 6. Otkritie Stadium, Moscow Capacity: 45,360: A statue of Spartacus outside the stadium will prove popular, and the home of Spartak Moscow will likely be a fan favourite in 2018. It was built for club football, so the stands are close to the pitch.7. Central Stadium, Yekaterinburg Capacity: 35,696: The main aspect of note at Ekaterinburg are the temporary stands that sit behind each goal. Protruding outside of the stadium, FIFA introduced them to make sure the stadium is above the 35,000 required minimum. They will be taken down after the tournament and the stadium will be home to FC Ural, a mid-table team in the Russian premier League.Join 'Engineering World' like many others to get access to very special perks:youtube.com/channel/UCh2wZoBynUkHmTX2GOwAKKg/joinAlso, kindly consider subscribing to our channel if you liked the video: geni.us/SubscribeChannel Watch some of our other interesting videos: Are Wind Turbines really Environmentally Friendly? Link: youtu.be/MVHzfUWul2Y Which is the best seaplane ever made? Link: youtu.be/XNQ9hnJMiY8Can SpaceX rockets really land from the space? Link: youtu.be/aH9JQ4Kash0
CRUDE OIL 101 : All you need to know about Crude (With Quiz) Engineering World 2018-05-31 | Fossil fuels definition: is a fuel formed by natural processes, such as anaerobic decomposition of buried dead organisms, containing energy originating in ancient photosynthesis. The age of the organisms and their resulting fossil fuels is typically millions of years, and sometimes exceeds 650 million years. Fossil fuels contain high percentages of carbon and include petroleum, coal, and natural gas. Other commonly used derivatives include kerosene, petrol fuel and propane. Fossil fuels range from volatile materials with low carbon to hydrogen ratios like methane, to liquids like petroleum, to nonvolatile materials composed of almost pure carbon, like anthracite coal. Methane can be found in hydrocarbon fields either alone, associated with oil, or in the form of methane clathrates. The study in petroleum engineering is one pursued worldwide in order to explore this industry.As of 2018, the world's main primary energy sources consisted of petroleum (34%), coal (27%), and natural gas (24%), amounting to an 85% share for fossil fuels in primary energy consumption in the world. Non-fossil sources included nuclear (4.4%), hydroelectric (6.8%), and other renewables (4.0%, including geothermal, solar, tidal, wind, wood, and waste). The share of renewables (including traditional biomass) in the world's total final energy consumption was 18% in 2018. Compared with 2017, world energy-consumption grew at a rate of 2.9%, almost double its 10-year average of 1.5% per year, and the fastest since 2010. Join the movement www.studentenergy.orgJoin 'Engineering World' like many others to get access to very special perks:youtube.com/channel/UCh2wZoBynUkHmTX2GOwAKKg/joinAlso, kindly consider subscribing to our channel if you liked the video: geni.us/SubscribeChannel Watch some of our other interesting videos: Are Wind Turbines really Environmentally Friendly? Link: youtu.be/MVHzfUWul2Y Which is the best seaplane ever made? Link: youtu.be/XNQ9hnJMiY8Can SpaceX rockets really land from the space? Link: youtu.be/aH9JQ4Kash0
10 AMAZING Space Rocket Launch Videos (Environmentally Friendly?) Engineering World 2018-03-23 | For best feel and effect kindly play this video as LOUD as possible, more about rocket launch : A rocket launch is the takeoff phase of the flight of a rocket. Launches for orbital spaceflights, or launches into interplanetary space, are usually from a fixed location on the ground, but may also be from a floating platform or from an airplane.Orbital launch vehicles commonly take off vertically, and then begin to progressively lean over, usually following a gravity turn trajectory. Once above the majority of the atmosphere, the vehicle then angles the rocket jet, pointing it largely horizontally but somewhat downwards, which permits the vehicle to gain and then maintain altitude while increasing horizontal speed. As the speed grows, the vehicle will become more and more horizontal until at orbital speed, the engine will cut off.Space launch is the earliest part of a flight that reaches space. Space launch involves liftoff, when a rocket or other space launch vehicle leaves the ground, floating ship or midair aircraft at the start of a flight. Liftoff is of two main types: rocket launch (the current conventional method), and non-rocket spacelaunch (where other forms of propulsion are employed, including air breathing jet engines or other kinds).Join 'Engineering World' like many others to get access to very special perks:youtube.com/channel/UCh2wZoBynUkHmTX2GOwAKKg/joinAlso, kindly consider subscribing to our channel if you liked the video: geni.us/SubscribeChannel Watch some of our other interesting videos: Are Wind Turbines really Environmentally Friendly? Link: youtu.be/MVHzfUWul2Y Which is the best seaplane ever made? Link: youtu.be/XNQ9hnJMiY8Can SpaceX rockets really land from the space? Link: youtu.be/aH9JQ4Kash0
Top 10 Agriculture Machines Videos Engineering World 2018-03-12 | This video shows you the agriculture machine pictures and uses along with names and introduces the audience to farm machinery. The names of agricultural machines are mentioned with each video. Agricultural machinery is machinery used in farming or other agriculture to give a boast in agriculture business and in agriculture mechanics. There are many types of such equipment, from hand tools and power tools to tractors and the countless kinds of farm implements that they tow or operate for agriculture mechanics. Diverse arrays of equipment are used in both organic and non organic farming which has helped in agricultural revolution. Especially since the advent of mechanized agriculture, agricultural machinery is an indispensable part of how the world is fed. The department of agriculture in every country takes active steps to help the farming community and to drive the agricultural economics and agriculture business management. Combines might have taken the harvesting job away from tractors, but tractors still do the majority of work on a modern farm. They are used to push implements—machines that till the ground, plant seed, and perform other tasks.Tillage implements prepare the soil for planting by loosening the soil and killing weeds or competing plants. The best-known is the plow, the ancient implement that was upgraded in 1838 by John Deere. Plows are now used less frequently in the U.S. than formerly, with offset disks used instead to turn over the soil, and chisels used to gain the depth needed to retain moisture.The most common type of seeder is called a planter, and spaces seeds out equally in long rows, which are usually two to three feet apart. Some crops are planted by drills, which put out much more seed in rows less than a foot apart, blanketing the field with crops. Transplanters automate the task of transplanting seedlings to the field. With the widespread use of plastic mulch, plastic mulch layers, transplanters, and seeders lay down long rows of plastic, and plant through them automatically.After planting, other implements can be used to cultivate weeds from between rows, or to spread fertilizer and pesticides. Hay balers can be used to tightly package grass or alfalfa into a storable form for the winter months.Modern irrigation relies on machinery. Engines, pumps and other specialized gear provide water quickly and in high volumes to large areas of land. Similar types of equipment can be used to deliver fertilizers and pesticides.Join 'Engineering World' like many others to get access to very special perks:youtube.com/channel/UCh2wZoBynUkHmTX2GOwAKKg/joinAlso, kindly consider subscribing to our channel if you liked the video: geni.us/SubscribeChannel Watch some of our other interesting videos: Are Wind Turbines really Environmentally Friendly? Link: youtu.be/MVHzfUWul2Y Which is the best seaplane ever made? Link: youtu.be/XNQ9hnJMiY8Can SpaceX rockets really land from the space? Link: youtu.be/aH9JQ4Kash0
5 AMAZING SpaceX Rocket Landing Videos (Engineering Masterpiece) Engineering World 2017-10-14 | Historically, most rockets have needed to use all of their available fuel in order to get their payload into space. SpaceX rockets were built from the beginning with reusability in mind—they have enough built-in fuel margin to deliver a Dragon to the space station and return the first-stage to Earth. That extra fuel is needed to reignite the engines a few times to slow the rocket down and ultimately land the first stage after it has sent the spacecraft on its way.In addition to extra fuel the rocket has small, foldable heat-resistant wings called grid fins needed for steering the first-stage as it plummets from the edge of space through Earth’s atmosphere, cold-gas thrusters on the top of the first-stage that are used to flip the rocket around as it begins its journey back to Earth, and strong but lightweight carbon fiber landing legs are deployed as it approaches touchdown. All of these systems, while built and programmed by humans, are totally automated once the rocket is launched—and are reacting and adjusting their behavior based on incoming, real-time data.Join 'Engineering World' like many others to get access to very special perks:youtube.com/channel/UCh2wZoBynUkHmTX2GOwAKKg/joinAlso, kindly consider subscribing to our channel if you liked the video: geni.us/SubscribeChannel Watch some of our other interesting videos: Are Wind Turbines really Environmentally Friendly? Link: youtu.be/MVHzfUWul2Y Which is the best seaplane ever made? Link: youtu.be/XNQ9hnJMiY8Can SpaceX rockets really land from the space? Link: youtu.be/aH9JQ4Kash0
10 INCREDIBLE Machines From Around the World (Will They Take Our Jobs?) Engineering World 2017-09-12 | Machines have made modern life very convenient and challenging. Many of these new inventions are engineering marvels and are objects of curiosity and wonderment. In this video we present you 10 amazing machines which perform some wonderful job :SAM100: A New York-based company has invented one of the most awesome machine which is a semi-automated robot that is able to lay bricks up to four times faster than a human can and it will be commercially ready in September. The Semi-Automated Mason (SAM) system costs $500,000 (£330,000) and has taken New York-based Construction Robotics eight years to develop and test out on construction sites.TRAC-140: An effective machine for mowing the grass along a highway without disturbing any traffic flow.SVM 1000: Plasser & Theurer SVM 1000 track laying train, can lay up to 2km of track in 24 hours which is semi-automated and is being used world wide to lay train lines which much lesser efforts and faster turnaround time.TBM: A tunnel boring machine (TBM), also known as a "mole", is a machine used to excavate tunnels with a circular cross section through a variety of soil and rock strata. They may also be used for micro tunneling. They can bore through anything from hard rock to sand. P380: Bridge inspection units have been successfully used on a large number of railway vehicles, 2-way vehicles and road vehicles for many years. They stand out by virtue of a particularly large operating range both above and below track level.HPW-DUST: Newer street sweepers are capable of collecting small particles of debris.Many street sweepers produced today are PM10 certified, meaning that they are capable of collecting and holding particulate matter sized less than 10μm. Despite advancements in street sweeping technology, the mechanical broom type street sweeper accounts for approximately 90 percent of all street sweepers used in the United States today.Road Zipper: A barrier transfer machine, also known as zipper machine or road zipper, is a heavy vehicle used to transfer concrete lane dividers, such as jersey barriers, which are used to relieve traffic congestion during rush hours. Many other cities use them temporarily during construction work. The lanes created by the machine are sometimes referred to as "zipper lanes".Panther: Airport crash tenders are extremely powerful and one of the most awesome machines. They offer relatively good acceleration (for such large, heavy vehicles), are able to negotiate rough terrain outside the airport area, carry large capacities of water and firefighting foam, are fitted with powerful high-capacity pumps and water/foam cannons, and are capable of delivering firefighting media over long distances.CLASS DD14: The Class DD14 is japanese incredible machine which was a B'B' wheel arrangement diesel-hydraulic locomotive type operated in Japan as a self-propelled rotary snowplough unit from 1961 to 2015 by the national railway company Japanese National Railways (JNR), and later by East Japan Railway Company (JR East). West Japan Railway Company (JR West), and Hokkaido Railway Company (JR Hokkaido).901TX: The Komatsu 901TX is designed from the ground up to be one of the most awesome machine and world’s most productive thinning machine. It possesses an unmatched combination of performance and maneuverability making it extremely effective while minimizing its impact in the forest. Join 'Engineering World' like many others to get access to very special perks:youtube.com/channel/UCh2wZoBynUkHmTX2GOwAKKg/joinAlso, kindly consider subscribing to our channel if you liked the video: geni.us/SubscribeChannel Watch some of our other interesting videos: Are Wind Turbines really Environmentally Friendly? Link: youtu.be/MVHzfUWul2Y Which is the best seaplane ever made? Link: youtu.be/XNQ9hnJMiY8Can SpaceX rockets really land from the space? Link: youtu.be/aH9JQ4Kash0
6 AMAZING Railway Tracks from Around the World Videos (Are They Safe?) Engineering World 2017-09-06 | Here are the 6 best railway tracks from around the world which are just marvelous piece of architecture. These routes are used by various railroad companies like Indian railways, Burma Railways etc and are either used for carrying passengers or used to transport railway freight through rail yard.Railways are also associated with a high risk of accidents especially at the railroad crossing, for example a scenario in which a train hits trucks etc could cause a train wreck. Modern day technologies use advance railway apps.Join 'Engineering World' like many others to get access to very special perks:youtube.com/channel/UCh2wZoBynUkHmTX2GOwAKKg/joinAlso, kindly consider subscribing to our channel if you liked the video: geni.us/SubscribeChannel Watch some of our other interesting videos: Are Wind Turbines really Environmentally Friendly? Link: youtu.be/MVHzfUWul2Y Which is the best seaplane ever made? Link: youtu.be/XNQ9hnJMiY8Can SpaceX rockets really land from the space? Link: youtu.be/aH9JQ4Kash0
Top 7 Seaplanes from Around the WORLD Videos Engineering World 2017-08-18 | A seaplane is an aircraft equipped with floats so that it can take off from, and land on, water. On many seaplanes, the floats hold the aircraft's fuselage clear of the water. On others, called "flying boats", the fuselage is shaped like the hull of a boat and rests on the water's surface/ Seaplanes are most useful in places where there are small islands, with little space to build proper runways. Seaplanes can also take part in rescue missions, because they can carry more people than a helicopter and fly longer distances. However, they cannot fly in rough weather, because big waves make take-off and landing too dangerous for the aircraft. Their use gradually tailed off after World War II, partially because of the investments in airports during the war but surprisingly some of the ww1 airplanes still exist. In the 21st century, seaplanes maintain a few niche uses, such as for dropping water on forest fires, air transport around archipelagos etc.Here are few interesting facts about seaplanes: 1.The first ever successful powered seaplane flight was completed by Henri Fabre on 28 March 1910. The Frenchman flew his plane known as the ’Gnome Omega-powered Hydravion’.2. In September 1919, British company Supermarine started operating the first flying-boat service in the world, from Woolston to Le Havre in France.3. On 18 December 1990, Pilot Tom Casey completed the first round-the-world flight with only water landings using a Cessna 206 seaplane named Liberty.4. The fastest jet-propelled seaplane is the Convair F2Y Sea Dart, with a top speed of 1328 km per hour.5. Currently China manufactures the world’s largest seaplane – the AG600 – which was designed to fight forest fires and aid marine rescues. It can rescue up to 50 people on a mission.6. Seaplane is a term that is used to describe floatplanes and flying boats. A flying boat uses the main body of the craft for floatation, whereas the floatplane uses a set of floats or pontoons to keep itself afloat.Join 'Engineering World' like many others to get access to very special perks:youtube.com/channel/UCh2wZoBynUkHmTX2GOwAKKg/joinAlso, kindly consider subscribing to our channel if you liked the video: geni.us/SubscribeChannel Watch some of our other interesting videos: Are Wind Turbines really Environmentally Friendly? Link: youtu.be/MVHzfUWul2Y Which is the best seaplane ever made? Link: youtu.be/XNQ9hnJMiY8Can SpaceX rockets really land from the space? Link: youtu.be/aH9JQ4Kash0
