3...uhhh..6 Months Later: The Elegoo Centauri Carbon @3DJake_Official
3...uhhh..6 Months Later: The Elegoo Centauri Carbon  @3DJake_Official
Uploaded November 2025 | Updated November 2026, 2 days ago
The Elegoo Centauri Carbon has been, perhaps not too busy. In this long‑term review I break down what actually mattered after the honeymoon: the dim chamber light, the louder‑than‑average fans, a hotend clog from switching nylon to PLA without a purge (my mistake), PTFE routing concerns, strong print quality, and why this machine ultimately doesn’t fit me —even though it absolutely can be a great starter for the right user.

Want one?
🔥 Shop the Elegoo Centauri Carbon at 3DJake → tinyurl.com/yc2k8xcb 🔥

⚡ Also check out our first look video here: youtube.com/watch?v=RPTVwkmLxRw ⚡

🔬 In this video, we cover:
✅ Reliability snapshot: ~400 hours in ~6 months; one clog caused by nylon→PLA swap without purge, and otherwise solid print quality.
✅ Noise & lighting: It shipped loud with weak chamber lighting, but newer units come with a quieter fan and better lights—important if you print overnight or in dim rooms.
✅ PTFE path: Steep entry angle and potential kinks when the toolhead hits back‑left extremes—what to watch for if you print near the edges.
✅ No AMS (yet): Multicolor/material convenience isn’t here; rumors swirl about a “CC2,” but for now you’ll rely on single‑spool workflows.
✅ Beginner‑plus hardware: Hardened steel extruder gears, hardened nozzle, and a 320 °C hotend—we even ran PPS‑CF in our first look, which most “entry” machines can’t touch.
✅ Who it’s for: Fantastic value around €300 if you want to move beyond PLA into tougher materials; less compelling if you already own a heated‑chamber rig or an AMS setup.

💬 What do you think? Have you tried this setup? Drop a comment with your Centauri Carbon experience—noise levels, PTFE wear, and what materials you’ve pushed through it. Your data helps everyone makes the right decision.

🔥 Links 🔥
🛒 Webshop: 3djake.com
📲 Facebook: facebook.com/3DJake
🔒 Facebook Community Group: facebook.com/groups/3DJake
📸 Instagram: instagram.com/3djake_official
📲 Discord: discord.gg/bqXqbCmksz
📲 Twitter: twitter.com/3djake_official
📲 Tiktok: tiktok.com/@3djake_official
📲 WonderLink: https://wonderl.ink/@3djake_official
3...uhhh..6 Months Later: The Elegoo Centauri CarbonThe SUNLU AMS Heater: Powerful, Independent, NecessaryElegoo Centauri Carbon Poop DrawerUP TO 30% OFF PRINTERS THIS BLACK FRIDAYEARTH HOUR 2025Anycubic Kobra S1 Review – A True Bambu Lab Competitor?ecoPLA REFILLS GIVEAWAY!Revopoint Pop 4 - Professional Results On A BudgetAuto-ejection, print queuing and looping are easier than you think!RESIN AND RESIN PRINTERS ARE UP TO 30% OFF RIGHT NOW!We tested out the Qidi Tech Plus5 - Things got heatedAnycubics 11th Anniversary!
3DJake |

3...uhhh..6 Months Later: The Elegoo Centauri Carbon

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER