Uploaded January 2017 | Updated September 2026, 3 weeks ago
In this video, I'll show you how to downgrade to 2.1 using an exploit called Fasthax/Safehax. This works on versions 9.0 through 11.2. This is 100% free! You don't need Cubic ninja, OoT3D, any DSiWare game, or a 2nd console. This is the first step to installing arm9loaderhax. You can finish the installation by using the final link below. I won't be making a video on this. Many people worship the Holy Guide and don't like when videos are made on it because they aren't always 100% accurate.
Soundhax is the recommended free entrypoint for this. Below is a link to the video (also on screen at a few spots). This works on almost any firmware, including the latest (11.2).
---LINKS & DOWNLOADS---
How To Install Soundhax (Required): youtube.com/watch?v=Uysb6oQ7Bag
Downgrade Folder: mega.nz/#!RFxAiIbB!xtjTvXBZ1YwFuVC3TLqP6TTFm-ZetuE0r4r81KZSUbg
Downgrade Folder (Mirror): sendspace.com/file/w9m0ft
2.1.0 CTRTRANSFER (USA): mega.nz/#!VM4QUIyb!23jsEzNUoT2sR_EnSqBLcioTPajauoGvgNhfWylxIvQ
2.1.0 CTRTRANSFER (EUR): mega.nz/#!EI4RBbiY!si4L4SNracVZJsloMJ_WaNJ5wj_L8eKRdC7ifhSHq7Y
2.1.0 CTRTRANSFER (JAP): mega.nz/#!kVplmCaL!sntDhLcVK6Twr_SpEwOO2CgD4GvuOwHvtTJDjMC-Sy0
Yes, I know the filename says "o3ds" but it's for N3DS too. The guide uses this exact file. The reason there's no N3DS specific file is because N3DS's can't normally be on 2.1. Don't worry, this is safe though.
3DS Guide (Continue A9LH Installation): https://3ds.guide/installing-arm9loaderhax
---FAQ---
Q: My top screen is stretched after doing this. What do I do?
A: This is normal if you're on a 2DS. After finishing the A9LH installation, your screen will return to normal.
Q: Does this work on 9.3 - 10.7?
A: Yes, but there's another video for that. This will downgrade you directly to 9.2: youtube.com/watch?v=aYmcF3P6uUc
Q: Do I have to install arm9loaderhax?
A: No, but it's best to install arm9loaderhax. Continue on with the guide at the page linked above.
Q: I get a black screen when launching Safehax. How do I fix this?
A: You need to have a 3DS cartridge inserted into your console for this to work. Any cartridge works.
Thumbnail (by me): http://i.imgur.com/zHtYN3s.jpg
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Donate: bit.ly/1RMESY8
Subscribe: bit.ly/24FZ4lF
Website: bit.ly/1TYsPJw
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Thanks for watching! Like, subscribe, and comment for more codes, tutorials & videos :)
In this video, I'll show you how to downgrade to 2.1 using an exploit called Fasthax/Safehax. This works on versions 9.0 through 11.2. This is 100% free! You don't need Cubic ninja, OoT3D, any DSiWare game, or a 2nd console. This is the first step to installing arm9loaderhax. You can finish the installation by using the final link below. I won't be making a video on this. Many people worship the Holy Guide and don't like when videos are made on it because they aren't always 100% accurate.
Soundhax is the recommended free entrypoint for this. Below is a link to the video (also on screen at a few spots). This works on almost any firmware, including the latest (11.2).
---LINKS & DOWNLOADS---
How To Install Soundhax (Required): youtube.com/watch?v=Uysb6oQ7Bag
Downgrade Folder: mega.nz/#!RFxAiIbB!xtjTvXBZ1YwFuVC3TLqP6TTFm-ZetuE0r4r81KZSUbg
Downgrade Folder (Mirror): sendspace.com/file/w9m0ft
2.1.0 CTRTRANSFER (USA): mega.nz/#!VM4QUIyb!23jsEzNUoT2sR_EnSqBLcioTPajauoGvgNhfWylxIvQ
2.1.0 CTRTRANSFER (EUR): mega.nz/#!EI4RBbiY!si4L4SNracVZJsloMJ_WaNJ5wj_L8eKRdC7ifhSHq7Y
2.1.0 CTRTRANSFER (JAP): mega.nz/#!kVplmCaL!sntDhLcVK6Twr_SpEwOO2CgD4GvuOwHvtTJDjMC-Sy0
Yes, I know the filename says "o3ds" but it's for N3DS too. The guide uses this exact file. The reason there's no N3DS specific file is because N3DS's can't normally be on 2.1. Don't worry, this is safe though.
3DS Guide (Continue A9LH Installation): https://3ds.guide/installing-arm9loaderhax
---FAQ---
Q: My top screen is stretched after doing this. What do I do?
A: This is normal if you're on a 2DS. After finishing the A9LH installation, your screen will return to normal.
Q: Does this work on 9.3 - 10.7?
A: Yes, but there's another video for that. This will downgrade you directly to 9.2: youtube.com/watch?v=aYmcF3P6uUc
Q: Do I have to install arm9loaderhax?
A: No, but it's best to install arm9loaderhax. Continue on with the guide at the page linked above.
Q: I get a black screen when launching Safehax. How do I fix this?
A: You need to have a 3DS cartridge inserted into your console for this to work. Any cartridge works.
Thumbnail (by me): http://i.imgur.com/zHtYN3s.jpg
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Donate: bit.ly/1RMESY8
Subscribe: bit.ly/24FZ4lF
Website: bit.ly/1TYsPJw
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Thanks for watching! Like, subscribe, and comment for more codes, tutorials & videos :)
![[Switch] Recent Modding News Summary
Recently, a lot of Switch hacking news has been announced. Weve got a new emulator, a modchip, a softmod, and some other stuff coming soon. I didnt discuss every topic in this video, but I discussed the main 3 that I thought would appeal most to the average user who wants to mod their Switch console.
For more details, make sure to check out the links below! I only summarized some of the main topics. You can do the rest of the reading yourself on whichever topic youre interested in.
Yuzu Emulator: http://gbatemp.net/threads/yuzu-nintendo-switch-emulator-discussion.494181/
fail0verflow Exploit Information: https://twitter.com/fail0verflow/status/953084954145181696
Team Xecuter Modchip: http://team-xecuter.com/team-xecuter-coming-to-your-nintendo-switch-console/
Switch Hacking & Homebrew Forum: http://gbatemp.net/forums/switch-hacking-homebrew.285/
Thumbnail (by me): https://i.imgur.com/GtjxXH0.png
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Twitter: http://bit.ly/2n85dq6
Donate: http://bit.ly/1RMESY8
Subscribe: http://bit.ly/24FZ4lF
Website: http://bit.ly/1TYsPJw
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Thanks for watching! Like, subscribe, and comment for more codes, tutorials & videos :) [Switch] Recent Modding News Summary](https://i.ytimg.com/vi/R8f3azfbgj0/mqdefault.jpg)
![[Wii U] Cafe Code Porter Program
This is a program I made to convert codes from the old codehandler to the new codehandler. Theres really no need for anyone to go back to the old codehandler, so fixing that part of the program is not even close to the top of my priorities list.
This should work for all codes on the old codehandler. If it doesnt, make sure that there are no non-hexadecimal characters in the input textbox, and make sure the code worked beforehand.
Download (.exe): https://github.com/DarkFlare69/Wii-U-Code-Porter/raw/master/MK8%20Code%20Porter/bin/Debug/Wii%20U%20Code%20Porter.exe
Source Code: https://github.com/DarkFlare69/Wii-U-Code-Porter/
Thumbnail (by me):
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Twitter: http://bit.ly/2n85dq6
Donate: http://bit.ly/1RMESY8
Subscribe: http://bit.ly/24FZ4lF
Website: http://bit.ly/1TYsPJw
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Thanks for watching! Like, subscribe, and comment for more codes, tutorials & videos :) [Wii U] Cafe Code Porter Program](https://i.ytimg.com/vi/RDCqp_8xLgM/mqdefault.jpg)
![[Switch] How To Copy Miis From 3DS or Wii U
Today Ill be showing you how to transfer Miis from the Wii U or 3DS onto the Switch. This works for getting hacked symbols onto the Switch and isnt very difficult to do. It requires no sort of hacks or mods on any of the systems. This is useful since the Switch doesnt have a camera to scan QR codes with. This is the only way to transfer Miis from another console and the only way to get custom symbols onto a Switch Mii (if desired).
How To Make NTAG215 Amiibos: https://www.youtube.com/watch?v=lDR342N65WU
My Custom 3DS Keyboard (For hacked symbols): https://www.youtube.com/watch?v=JQD63s4GnN8
Thumbnail (by me & Gyndemia): http://i.imgur.com/Uc4kz1j.jpg
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Twitter: http://bit.ly/2n85dq6
Donate: http://bit.ly/1RMESY8
Subscribe: http://bit.ly/24FZ4lF
Website: http://bit.ly/1TYsPJw
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Thanks for watching! Like, subscribe, and comment for more codes, tutorials & videos :) [Switch] How To Copy Miis From 3DS or Wii U](https://i.ytimg.com/vi/RNgO8d1_zYw/mqdefault.jpg)
![[MK8] How Fast Can You Go With Only Coins?
I got bored and decided to see what your maximum speed would be if you only used coins in Mario Kart 8 without pressing the accelerate button. The item hack I used to always have coins is released in my last video: https://www.youtube.com/watch?v=CeQIW3iE9ys
Your max speed with coins will not change as long as you use the next coin before the last boost ends, so it doesnt matter the rate I use the coins at.
Thumbnail (by me): https://i.imgur.com/e9P6KBd.jpg
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Twitter: http://bit.ly/2n85dq6
Donate: http://bit.ly/1RMESY8
Subscribe: http://bit.ly/24FZ4lF
Website: http://bit.ly/1TYsPJw
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Thanks for watching! Like, subscribe, and comment for more codes, tutorials & videos :) [MK8] How Fast Can You Go With Only Coins?](https://i.ytimg.com/vi/RQ0es_nJwVw/mqdefault.jpg)
![[MK8] Stalking Code Online (Release)
This is a code I made for MK8 that will allow you to stalk players, both offline and online. It took a long time to get it working completely and I learned a lot from making this. It was fun to write and satisfying when it finally worked properly after a few days.
Stalking (Online) Source:
lis r2, 0x1F6B
ori r2, r2, 0x9710
lwz r2, 0 (r2)
cmpwi r2, 1
bne- end
lis r2, 0x1F5E
ori r2, r2, 0xF428
lhz r2, 0 (r2)
cmpwi r2, 8
bne- end
lis r1, 0x4445
lwz r1, 0x428C (r1)
lwz r1, 0xC8 (r1)
lis r2, 0x1F6B
lwz r2, 0x4C18 (r2)
mulli r2, r2, 0x6C
addi r2, r2, 8
add r1, r2, r1
lis r2, 0
ori r2, r2, 0x1040
sth r2, 2 (r1)
lis r3, 0x4445
ori r3, r3, 0xAC50
lis r4, 0x1F6B
lis r5, 0
lwz r4, 0x4C18 (r4)
mulli r4, r4, 4
add r4, r4, r3
lwz r4, 0 (r4)
stw r5, 0x14C4 (r4)
lis r12, 0x4443
ori r12, r12, 0xBB4C
lwz r12, 0 (r12)
lis r1, 0x1100
lwz r1, 0x18 (r1)
lis r11, 0x001A
ori r11, r11, 0x1C78
mullw r3, r11, r1
add r3, r3, r12
lwz r4, 0x5020 (r3)
lwz r5, 0x5024 (r3)
lwz r6, 0x5028 (r3)
lis r3, 0x1F6B
lwz r3, 0x4C18 (r3)
mullw r3, r11, r3
add r3, r3, r12
stw r4, 0x5020 (r3)
stw r5, 0x5024 (r3)
stw r6, 0x5028 (r3)
lis r3, 0x1100
lwz r3, 0x20 (r3)
lis r6, 0x1F6B
ori r6, r6, 0x4C18
lwz r6, 0 (r6)
lis r1, 0x1100
ori r1, r1, 0x18
lwz r2, 0 (r1)
cmpwi r2, 0xC
blt- reset
stw r3, 0 (r1)
reset: nop
lis r7, 0x1F60
lwz r7, 0x4EA0 (r7)
andi. r7, r7, 0x100
cmpwi r7, 0x100
bne- end
stw r6, 0 (r1)
end: nop
You can get the complete code at GBAtemp, because its too long to post in the video description: http://gbatemp.net/threads/post-your-wiiu-cheat-codes-here.395443/page-406#post-7558194
Thumbnail (by me): http://i.imgur.com/41tV8mX.jpg
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Twitter: http://bit.ly/2n85dq6
Donate: http://bit.ly/1RMESY8
Subscribe: http://bit.ly/24FZ4lF
Website: http://bit.ly/1TYsPJw
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Thanks for watching! Like, subscribe, and comment for more codes, tutorials & videos :) [MK8] Stalking Code Online (Release)](https://i.ytimg.com/vi/SO7ZJNYA7VU/mqdefault.jpg)
![[MK8D] Shine Swallower Glitches/Bugs
This is a video showing one of the major glitches that the Shine Swallower code had before I made the final version. It would cause me to never lose the shine and it would make battles last for the full 5 minutes. I guess this by itself could be its own hack, but I really would have no interest in using it since all it does is waste time.
Thumbnail (by me): https://i.imgur.com/xQYen8M.jpg
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Twitter: http://bit.ly/2n85dq6
Donate: http://bit.ly/1RMESY8
Subscribe: http://bit.ly/24FZ4lF
Website: http://bit.ly/1TYsPJw
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Thanks for watching! Like, subscribe, and comment for more codes, tutorials & videos :) [MK8D] Shine Swallower Glitches/Bugs](https://i.ytimg.com/vi/ScEbur-9KCc/mqdefault.jpg)
![[Wii U] How To Access Homebrew Launcher on 5.5.2
Today, a new exploit was released, allowing us to access homebrew on a Wii U with firmware 5.5.2. Its rather unstable. It will take many times to work. This can change with time, but for now keep that in mind. There are different websites that host the exploits, but I recommend using the one I used in the video. For other links, see the GBAtemp thread below.
LINKS & DOWNLOADS
The Homebrew Launcher: https://github.com/dimok789/homebrew_launcher/releases/download/1.4/homebrew_launcher.v1.4.zip
Wii U Exploit Link: http://u.drg.li/
GBAtemp Link (More information): https://gbatemp.net/threads/webhack-on-5-5-2.480938/
Thumbnail (by me): http://i.imgur.com/Vx6Cdx1.jpg
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Twitter: http://bit.ly/2n85dq6
Donate: http://bit.ly/1RMESY8
Subscribe: http://bit.ly/24FZ4lF
Website: http://bit.ly/1TYsPJw
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Thanks for watching! Like, subscribe, and comment for more codes, tutorials & videos :) [Wii U] How To Access Homebrew Launcher on 5.5.2](https://i.ytimg.com/vi/SxoESAzfofY/mqdefault.jpg)
![[3DS] Online Gateway To NTR Code Converter (Release)
This is a program I started working on 2 days ago that will automatically convert Gateshark codes to NTR. The converter itself was written completely from scratch with no code taken from Nanquitas Gateshark2NTR or from any other converter. I wrote one in Python a while ago, but it wasnt very good due to my limited knowledge of that language. This one is a major improvement over it. However, I am still a beginner at programming, so the source code is very dirty (which means dont comment on it, because I already am aware of how it isnt very well-written). I could improve it a lot, although it isnt really necessary as the program functions optimally for the end-user. If you are seriously trying to convert codes (not putting in random stuff to try and mess with the converter) it should work almost all of the time.
Features:
-Code Checker, to see if your codes will convert properly
-Help pages, such as the NDS Codetype documentation
-Optimization, to clean up the code once its converted to NTR
-Plugin builder, build the plugin file with one click
-Copy to Clipboard, to easily copy all of the converted codes
Advantages over other converters:
-Online support for all plugins created using this converter
-Open Source
-The source code of your plugin will be openly available inside of the /pluginMenu directory
-Complete UI
-Type/copy codes as text or load them from a file
-All of the things listed above under Features
GBAtemp Thread: http://gbatemp.net/threads/release-online-gateway-to-ntr-code-converter.492656/
Download (.zip): https://github.com/DarkFlare69/Gateway-To-NTR-Converter/raw/master/Gateway%20To%20NTR%20Converter/Release/Gateway%20To%20NTR%20Converter.zip
Source Code: https://github.com/DarkFlare69/Gateway-To-NTR-Converter
Thumbnail (by me): https://i.imgur.com/ZxpmT0U.png
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Twitter: http://bit.ly/2n85dq6
Donate: http://bit.ly/1RMESY8
Subscribe: http://bit.ly/24FZ4lF
Website: http://bit.ly/1TYsPJw
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Thanks for watching! Like, subscribe, and comment for more codes, tutorials & videos :) [3DS] Online Gateway To NTR Code Converter (Release)](https://i.ytimg.com/vi/T3N152cuQv0/mqdefault.jpg)
![[MK8D] Gravity Modifier
This is a hack I made for Mario Kart 8 Deluxe that allows me to choose which amount of gravity is on the course. Its the same thing as on the Wii U, pretty much.
For anyone who thinks this is the Wii U version of the game, you can continue to think that.
Thumbnail (by me): https://i.imgur.com/FCdc7qL.jpg
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Twitter: http://bit.ly/2n85dq6
Donate: http://bit.ly/1RMESY8
Subscribe: http://bit.ly/24FZ4lF
Website: http://bit.ly/1TYsPJw
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Thanks for watching! Like, subscribe, and comment for more codes, tutorials & videos :) [MK8D] Gravity Modifier](https://i.ytimg.com/vi/TNYQXNYVilc/mqdefault.jpg)
![[MK8] Blue Shell Ride (Online)
This is another code I made for Mario Kart 8. It works in all areas, offline or online, and makes you ride the blue shell by pressing a button. It was inspired by davidevgen.
I wont release it to keep MK8 unhacked.
Thumbnail (by me): http://i.imgur.com/8Ilz6F4.jpg
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Donate: http://bit.ly/1RMESY8
Subscribe: http://bit.ly/24FZ4lF
Website: http://bit.ly/1TYsPJw
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Thanks for watching! Like, subscribe, and comment for more codes, tutorials & videos :) [MK8] Blue Shell Ride (Online)](https://i.ytimg.com/vi/TOyeo-kRvx8/mqdefault.jpg)
