NeedItMakeIt | 3DP Duct Showdown - Two BIG circular ducts need to be fixed or they can't compete @NeedItMakeIt | Uploaded September 2024 | Updated October 2024, 11 hours ago.
We're finally ready!... It wouldn't be right to just leave these, they wouldn't be able to compete.
Help support this channel! patreon.com/Needitmakeit
We're finally getting the showdown underway, we have 2 big circular ducts that look incredible and the could both perform really well, but they both have big problems. I could just leave them as-is, but that isn't right, these took quite a bit of time to design, the least I could do is try to come up with a way to fix them so they have a fighting chance in the next video.
We're also going to go over the test samples and let me know in the comments if you like them, hate them and let me know if you have samples of your own that you'd like to see in the competition as well.
Overhung & Bridge_Burst (NIMI) - makerworld.com/en/models/668332#profileId-595924
Overhang Test Shuriken (By Rocksalt) - thingiverse.com/thing:6315375
Benchy (By CreativeTools) - thingiverse.com/thing:763622
Thank you for helping to make this channel a success! Affiliate links:
**QIDI PLUS4** - qidi3d.com/products/plus4-3d-printer?sca_ref=5735403.eknTRISP1e
Early Bird - A choice of either a Tungsten Carbide Bimetal Nozzle or a Bimetal Hot End (Shipping begins in 2 months for these)
Possible Coupon - 30DAYSGIFT
Possible Coupon - HIGH5
QIDI Q1 Pro - qidi3d.com/products/q1-pro?sca_ref=5735403.eknTRISP1e
ABS-GF25 - qidi3d.com/en-ca/products/qidi-tech-abs-gf25-filament?sca_ref=5735403.eknTRISP1e
Thermal Master P2 - shrsl.com/4o6j1
Bambu X1C - shrsl.com/4j1gz
Bambu Filament Shown in Videos - shrsl.com/4ks0j
Panda Jet For Bambu P1 and X1 Series (Tested and proven to work well) - shrsl.com/4jhht
Creality PI (Single) - amzn.to/3Xo3jUC
Creality PI (Double) - amzn.to/3XdQ4pj
Sunlu S2 - amzn.to/4geYRQm
Rode Mic - amzn.to/3vcMKAr - amzn.to/3NBFvZe
#qidi
#plus4
#bestprinter
We're finally ready!... It wouldn't be right to just leave these, they wouldn't be able to compete.
Help support this channel! patreon.com/Needitmakeit
We're finally getting the showdown underway, we have 2 big circular ducts that look incredible and the could both perform really well, but they both have big problems. I could just leave them as-is, but that isn't right, these took quite a bit of time to design, the least I could do is try to come up with a way to fix them so they have a fighting chance in the next video.
We're also going to go over the test samples and let me know in the comments if you like them, hate them and let me know if you have samples of your own that you'd like to see in the competition as well.
Overhung & Bridge_Burst (NIMI) - makerworld.com/en/models/668332#profileId-595924
Overhang Test Shuriken (By Rocksalt) - thingiverse.com/thing:6315375
Benchy (By CreativeTools) - thingiverse.com/thing:763622
Thank you for helping to make this channel a success! Affiliate links:
**QIDI PLUS4** - qidi3d.com/products/plus4-3d-printer?sca_ref=5735403.eknTRISP1e
Early Bird - A choice of either a Tungsten Carbide Bimetal Nozzle or a Bimetal Hot End (Shipping begins in 2 months for these)
Possible Coupon - 30DAYSGIFT
Possible Coupon - HIGH5
QIDI Q1 Pro - qidi3d.com/products/q1-pro?sca_ref=5735403.eknTRISP1e
ABS-GF25 - qidi3d.com/en-ca/products/qidi-tech-abs-gf25-filament?sca_ref=5735403.eknTRISP1e
Thermal Master P2 - shrsl.com/4o6j1
Bambu X1C - shrsl.com/4j1gz
Bambu Filament Shown in Videos - shrsl.com/4ks0j
Panda Jet For Bambu P1 and X1 Series (Tested and proven to work well) - shrsl.com/4jhht
Creality PI (Single) - amzn.to/3Xo3jUC
Creality PI (Double) - amzn.to/3XdQ4pj
Sunlu S2 - amzn.to/4geYRQm
Rode Mic - amzn.to/3vcMKAr - amzn.to/3NBFvZe
#qidi
#plus4
#bestprinter