Uploaded June 2024 | Updated September 2026, 3 hours ago
In this video I show an early version of the 3D Sensor calibration screen and walk through how the calibration process worked on the machine.
The process uses a known reference height and the 3D Sensor to calculate and set the correct sensor Z height. I show the calibration screen, the reference tool, the sensor touching off on the gauge block, and the value being written back into the tool table.
This video covers:
Early 3D Sensor calibration screen
Entering the reference tool height
Using a gauge block for calibration
Touching off the 3D Sensor
Calculating the sensor Z height
Writing the calibrated value back to the tool table
Verifying the calibration process on the machine
This is an early version of the workflow, but it gives a good look at how the 3D Sensor calibration process was developed and tested.
#SYIL #CNC #3DSensor #CNCTouchProbe #ProbeCalibration #CNCMachining #CNCSetup
In this video I show an early version of the 3D Sensor calibration screen and walk through how the calibration process worked on the machine.
The process uses a known reference height and the 3D Sensor to calculate and set the correct sensor Z height. I show the calibration screen, the reference tool, the sensor touching off on the gauge block, and the value being written back into the tool table.
This video covers:
Early 3D Sensor calibration screen
Entering the reference tool height
Using a gauge block for calibration
Touching off the 3D Sensor
Calculating the sensor Z height
Writing the calibrated value back to the tool table
Verifying the calibration process on the machine
This is an early version of the workflow, but it gives a good look at how the 3D Sensor calibration process was developed and tested.
#SYIL #CNC #3DSensor #CNCTouchProbe #ProbeCalibration #CNCMachining #CNCSetup
