3D Printing with Fire and Iron | Making a Solid Multifix Toolpost Riser @Clough42
3D Printing with Fire and Iron | Making a Solid Multifix Toolpost Riser  @Clough42
Uploaded August 2022 | Updated November 2026, 1 day ago
Today, we're designing and 3D-printing a casting pattern to make a solid toolpost riser for a Multifix quick-change toolpost on the Grizzly G0602 lathe. The plan is to delete the compound and replace it with a solid block of cast iron to improve the rigidity of the lathe and add a little style and flair at the same time. We'll design the casting pattern in Fusion 360, print it on the Elegoo Mars 2 Pro 3D printer, and send it off to the foundry to have it rammed up and cast in gray iron.

The casting will be done by Clarke Easterling at Windy Hill Foundry: windyhillfoundry.com
See Clarke's video of the casting process here: youtu.be/Hrkgplq5nBI

Tools used in this video:
*This site contains affiliate links for which I may be compensated

3Dconnexion SpaceMouse Compact 3D Mouse (Amazon*): amzn.to/2TSJ2q9
ELEGOO Mars 2 Pro 3D Printer (Amazon*): amzn.to/3goaM1J
ELEGOO Mercury Plus Wash/Cure Station (Amazon*): amzn.to/3gnE0OC
ELEGOO Standard Rapid Resin (Amazon*): amzn.to/2RDVgEI
99% Isopropyl Alcohol 2gal (Amazon*): amzn.to/32phtIZ
Waterproof Silicone Tray (Amazon*): amzn.to/32ruvFJ
Loctite 414 Super Bonder Super Glue (Amazon*): amzn.to/2ZsZn7A

Raw Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0 License
creativecommons.org/licenses/by/3.0

00:00 Intro
00:45 Multifix Toolpost
05:00 Removing the Compound
08:21 Designing a Solid Toolpost Riser Block
18:03 Designing the Casting Pattern
23:49 Testing the 3D Printed Prototype
25:51 Resin Printing a Large Hollow Part
31:12 Washing a Hollow Resin Print
32:29 Final Casting Pattern Prep

Fusion 360 tutorial sand mold cast iron foundry casting pattern multifix solid toolpost
multifix tool post cad cam 40 position tool post
3D Printing with Fire and Iron | Making a Solid Multifix Toolpost RiserDoes a Rotary Phase Converter Actually Make REAL 3-Phase Power?  (120 Degrees)220, 221, Whatever it Takes! | Wiring a Buck Transformer for a Magnetic Sheet Metal BrakeCan we 3D Print a One-Way Check Valve?Building a GPS Mechanical Clock: Getting Started With The Raspberry Pi PicoCrossfire Plasma Table Cable Management | Swapping the AxesLets Make a Tungsten Grinder | 3D Printing with NylonXMilling Curves With a Rotary Table - Hemingway Sensitive Knurling Tool Build - Part 3My 3D Scan to CAD Workflow: Using Scan Data in FusionIs This Fixture Plate Better Than a Vise?  Yes.  Yes, It Is.Hemingway Sensitive Knurling Tool Build - Part 13D Printing Filaments and Electricity: A Shocking Reality
Clough42 |

3D Printing with Fire and Iron | Making a Solid Multifix Toolpost Riser

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER