HomoFaciens | 3D printing sugar with a Direct Granules Extruder @HomoFaciens | Uploaded 2 years ago | Updated 15 hours ago
More on my wabsite:
https://homofaciens.de/technics-machines-3D-printer-Granule-Extruder-V3_en.htm
or on Hackaday:
hackaday.io/project/181165-my-machinery-2021-direct-granules-extruder
Table Of Content:
00:00 Introduction
00:26 Melting point sugar
01:01 Extrusion properties
01:52 Test print gearwheel
03:28 Sugar solution for bed adhesion
03:49 Test Octagon with 30mm/s
05:57 Test Octagon with 10mm/s
07:23 Walls with 20mm/s
08:24 Tensions while cooling down
08:54 Test print Cone
More on my wabsite:
https://homofaciens.de/technics-machines-3D-printer-Granule-Extruder-V3_en.htm
or on Hackaday:
hackaday.io/project/181165-my-machinery-2021-direct-granules-extruder
Table Of Content:
00:00 Introduction
00:26 Melting point sugar
01:01 Extrusion properties
01:52 Test print gearwheel
03:28 Sugar solution for bed adhesion
03:49 Test Octagon with 30mm/s
05:57 Test Octagon with 10mm/s
07:23 Walls with 20mm/s
08:24 Tensions while cooling down
08:54 Test print Cone