Uploaded March 2019 | Updated September 2026, 2 weeks ago
This video looks at the impact of switching from a .4mm nozzle to a 1mm nozzle and the optimal models to print with the larger nozzle.
The test prints were produced on a Monoprice MP10 which is a Creality CR10 clone. The concepts presented in this video apply to most FDM printers including the Ender 5, the Prusa I3 MK3 and the Monoprice Select Mini.
The spiral vases shown in this video are on Thingiverse at:
thingiverse.com/thing:570288
The large vase is on Thingiverse at:
thingiverse.com/thing:124175
The universal glasses stand is at:
thingiverse.com/thing:1264885
The following Google Slide deck contains the slicer settings and diagrams used in this video:
docs.google.com/presentation/d/13P3_mNNVpEt4vxkvJH5N1O3qHPgNguYCK9OZlnlfUug/edit?usp=sharing
Enjoy.
Irv
---
The following links are to products I have used, reviewed, or evaluated for the MakeWithTech community. Some of the links below are affiliate links that provide commissions, at no cost to you, and help support the MakeWithTech video production, purchase of products for reviews, lab, forum, and web site.
I have reviewed the following printers or similar printers:
➡︎ kit.co/makewithtech/3d-printers-reviewed-on-drvax-youtube-channel
These are some of the tools I use for 3d printing day-to-day:
➡︎ kit.co/makewithtech/basic-3d-printing-tools
I have reviewed or used the following 3d printer upgrades:
➡︎ kit.co/makewithtech/3d-printer-upgrades
Here are the 3d printer filaments I use to evaluate prints, software, and techniques:
➡︎ kit.co/makewithtech/3d-printing-filament-i-use-at-drvax
I will be covering basic electronics and software in future MakeWithTech segments and here are the products I am using:
kit.co/makewithtech/software-and-electronic-kits
Some of the Woodworking products I use:
kit.co/makewithtech/drvax-woodworking-tools-and-supplies
---
** Affiliate disclaimer: some of the above links in my videos may be affiliate links, which generate a sales commission for me. Your price is the same or less than if you go to the site directly. These sales commissions help to support the MakeWithTech channel. (https://makewithtech.com)
** MakeWithTech and the MakeWithTech videos are Copyright Cogitations, LLC. (https://cogitations.com)
** Equipment used in the MakeWithTech videos has the potential to cause injury if misused. Use all equipment and tools at your own risk and follow all manufacturer's safety recommendations.
** Cogitations, LLC licenses all music used in the MakeWithTech videos from Epidemic Sound. Cogitations, LLC uses only authorized or open source clip art and third party images. Images .
This video looks at the impact of switching from a .4mm nozzle to a 1mm nozzle and the optimal models to print with the larger nozzle.
The test prints were produced on a Monoprice MP10 which is a Creality CR10 clone. The concepts presented in this video apply to most FDM printers including the Ender 5, the Prusa I3 MK3 and the Monoprice Select Mini.
The spiral vases shown in this video are on Thingiverse at:
thingiverse.com/thing:570288
The large vase is on Thingiverse at:
thingiverse.com/thing:124175
The universal glasses stand is at:
thingiverse.com/thing:1264885
The following Google Slide deck contains the slicer settings and diagrams used in this video:
docs.google.com/presentation/d/13P3_mNNVpEt4vxkvJH5N1O3qHPgNguYCK9OZlnlfUug/edit?usp=sharing
Enjoy.
Irv
---
The following links are to products I have used, reviewed, or evaluated for the MakeWithTech community. Some of the links below are affiliate links that provide commissions, at no cost to you, and help support the MakeWithTech video production, purchase of products for reviews, lab, forum, and web site.
I have reviewed the following printers or similar printers:
➡︎ kit.co/makewithtech/3d-printers-reviewed-on-drvax-youtube-channel
These are some of the tools I use for 3d printing day-to-day:
➡︎ kit.co/makewithtech/basic-3d-printing-tools
I have reviewed or used the following 3d printer upgrades:
➡︎ kit.co/makewithtech/3d-printer-upgrades
Here are the 3d printer filaments I use to evaluate prints, software, and techniques:
➡︎ kit.co/makewithtech/3d-printing-filament-i-use-at-drvax
I will be covering basic electronics and software in future MakeWithTech segments and here are the products I am using:
kit.co/makewithtech/software-and-electronic-kits
Some of the Woodworking products I use:
kit.co/makewithtech/drvax-woodworking-tools-and-supplies
---
** Affiliate disclaimer: some of the above links in my videos may be affiliate links, which generate a sales commission for me. Your price is the same or less than if you go to the site directly. These sales commissions help to support the MakeWithTech channel. (https://makewithtech.com)
** MakeWithTech and the MakeWithTech videos are Copyright Cogitations, LLC. (https://cogitations.com)
** Equipment used in the MakeWithTech videos has the potential to cause injury if misused. Use all equipment and tools at your own risk and follow all manufacturer's safety recommendations.
** Cogitations, LLC licenses all music used in the MakeWithTech videos from Epidemic Sound. Cogitations, LLC uses only authorized or open source clip art and third party images. Images .
