Uploaded September 2024 | Updated November 2026, 4 days ago
Don't breathe this!
Thanks to Sunlu for sponsoring a part of this video! Check out their resin and filament options at go.toms3d.org/sunlu
The Ikea filters I used are FΓRNUFTIG (EPA12 + carbon) and the more affordable UPPΓ TVIND (EPA only)
If you get a HEPA filter e.g. from Amazon, I'd recommend buying a reputable brand to make sure you actually get what you're paying for. Philips is trustworthy and seems to have reasonably priced replacement filters (important as you'll be swapping them multiple times a year): go.toms3d.org/HEPAmazon
Parts and sensors used:
ESP32 WROVER go.toms3d.org/WROVER
ESP32 breakout go.toms3d.org/ESPbreakout
2.4" LCD go.toms3d.org/24lcd
PMS5003S particle + formaldehyde sensor go.toms3d.org/PMS5003S (make sure you actually get the "S" variant if you want the formaldehyde sensor - they're a bit hard to find)
SDS011 particle sensor go.toms3d.org/SDS011
Bosch BME680 VOC, temperature and humidity sensor go.toms3d.org/bme680
SCD40 CO2 Sensor (optional) go.toms3d.org/SCD40
ScioSense ENS160 VOC sensor go.toms3d.org/ENS160
MQ-7 CO sensor go.toms3d.org/MQ-7
...modified with these instructions devices.esphome.io/devices/MQ-7
I also used an SHT40 temperature and humidity sensor in the front, but it is noticeably inaccurate. I'm currently trying a AHT21 as a replacement.Also check out 3D printing deals during Amazon's Prime Days! go.toms3d.org/AmazonPrimeDeals
Product links are affiliate links - I may earn a commission on qualifying purchases (at no extra cost to you)
Software and stls for the sensorbox printables.com/model/993949-3d-printer-emissions-sensor-array
Models shown:
Canister set by JamesThePrinter printables.com/model/952755-canister-set
Read the article to this video here:
toms3d.org/2024/10/07/3d-printers-are-worse-than-i-thought-time-to-do-something-about-it
Papers and sources referenced:
pubmed.ncbi.nlm.nih.gov/35744939
pubmed.ncbi.nlm.nih.gov/28165927
sciencedirect.com/science/article/pii/S0160412018323663?via%3Dihub#t0010
journals.sagepub.com/doi/10.1177/0192623307313011
ncbi.nlm.nih.gov/pmc/articles/PMC5791918
https://www.efsa.europa.eu/en/topics/topic/bisphenol
π©΅ Support the channel by shopping through my affiliate links
Buy Bambu Lab printers and printer accessories go.toms3d.org/Bambu
Buy Prusa Research printers and printer accessories go.toms3d.org/prusa
Tools I use:
π© Onshape Cloud-native CAD (free for Makers) https://onshape.pro/ThomasSanladerer
π΅ Epidemic Sound for video music (30-day trial) share.epidemicsound.com/MadeWithLayers
π· Camera gear and recording equipment (not free, unfortunately) toms3d.org/my-gear
π§ Check out the Meltzone Podcast (with CNC Kitchen)! youtube.com/channel/UCzUgJrG-w_KQexroYkJR9XQ
π Enjoying the videos? Support my work on Patreon! patreon.com/toms3dp
Don't breathe this!
Thanks to Sunlu for sponsoring a part of this video! Check out their resin and filament options at go.toms3d.org/sunlu
The Ikea filters I used are FΓRNUFTIG (EPA12 + carbon) and the more affordable UPPΓ TVIND (EPA only)
If you get a HEPA filter e.g. from Amazon, I'd recommend buying a reputable brand to make sure you actually get what you're paying for. Philips is trustworthy and seems to have reasonably priced replacement filters (important as you'll be swapping them multiple times a year): go.toms3d.org/HEPAmazon
Parts and sensors used:
ESP32 WROVER go.toms3d.org/WROVER
ESP32 breakout go.toms3d.org/ESPbreakout
2.4" LCD go.toms3d.org/24lcd
PMS5003S particle + formaldehyde sensor go.toms3d.org/PMS5003S (make sure you actually get the "S" variant if you want the formaldehyde sensor - they're a bit hard to find)
SDS011 particle sensor go.toms3d.org/SDS011
Bosch BME680 VOC, temperature and humidity sensor go.toms3d.org/bme680
SCD40 CO2 Sensor (optional) go.toms3d.org/SCD40
ScioSense ENS160 VOC sensor go.toms3d.org/ENS160
MQ-7 CO sensor go.toms3d.org/MQ-7
...modified with these instructions devices.esphome.io/devices/MQ-7
I also used an SHT40 temperature and humidity sensor in the front, but it is noticeably inaccurate. I'm currently trying a AHT21 as a replacement.Also check out 3D printing deals during Amazon's Prime Days! go.toms3d.org/AmazonPrimeDeals
Product links are affiliate links - I may earn a commission on qualifying purchases (at no extra cost to you)
Software and stls for the sensorbox printables.com/model/993949-3d-printer-emissions-sensor-array
Models shown:
Canister set by JamesThePrinter printables.com/model/952755-canister-set
Read the article to this video here:
toms3d.org/2024/10/07/3d-printers-are-worse-than-i-thought-time-to-do-something-about-it
Papers and sources referenced:
pubmed.ncbi.nlm.nih.gov/35744939
pubmed.ncbi.nlm.nih.gov/28165927
sciencedirect.com/science/article/pii/S0160412018323663?via%3Dihub#t0010
journals.sagepub.com/doi/10.1177/0192623307313011
ncbi.nlm.nih.gov/pmc/articles/PMC5791918
https://www.efsa.europa.eu/en/topics/topic/bisphenol
π©΅ Support the channel by shopping through my affiliate links
Buy Bambu Lab printers and printer accessories go.toms3d.org/Bambu
Buy Prusa Research printers and printer accessories go.toms3d.org/prusa
Tools I use:
π© Onshape Cloud-native CAD (free for Makers) https://onshape.pro/ThomasSanladerer
π΅ Epidemic Sound for video music (30-day trial) share.epidemicsound.com/MadeWithLayers
π· Camera gear and recording equipment (not free, unfortunately) toms3d.org/my-gear
π§ Check out the Meltzone Podcast (with CNC Kitchen)! youtube.com/channel/UCzUgJrG-w_KQexroYkJR9XQ
π Enjoying the videos? Support my work on Patreon! patreon.com/toms3dp










