Uploaded June 2019 | Updated November 2026, 3 hours ago
Overview of Mods to my Tevo Tornado and Reprap Atom X Printers:
Link to 433Mhz Shutoff System:
Video: youtu.be/n-JgQ3SaVME
Files: drive.google.com/open?id=1nXcDwCVmPUcDuk1CiX6P3krTGfCGPx34
Octopi Temp Failsafe & Smartplug Howto:
Video: youtu.be/6kWmHCm7L8I
Octopi 3d Printer Monitor Wemos D1:
thingiverse.com/thing:2884823
Tevo Tornado Bed Cable Strain Relief Options:
thingiverse.com/search?q=tevo+tornado+strain+relief&dwh=985cf9868a4fef0
Box End TPU Strain Relief:
drive.google.com/open?id=19u7NFEU0l3z4JmzPm4mFaS9OcBOtrpKh
My Logitech C270 Simple Camera Mount:
thingiverse.com/thing:3662572
Hacked FireAngel Smoke Alarm Code (still draft but works fine for me - feel free to modify and improve):
drive.google.com/open?id=139xRYbk741onWTzqSe_t0VkfEefZBje1
(Schematic to follow)
Bed Level Reminder:
thingiverse.com/thing:2685349
My Tornado Firmware:
drive.google.com/open?id=1D324ZTjnWXQDUAdmHwy0ywlf3zv1T10W
My AtomX Files:
drive.google.com/open?id=0BzujMMpM5EE4NUNkU3F3RW9XSk0
Spool Holder:
thingiverse.com/thing:2740809
Y Motor Brace:
thingiverse.com/thing:2734468
Tornado Filament Guide:
thingiverse.com/thing:2829160?fbclid=IwAR1t_g1HzWxLiN7tM3pNzixcdAbhVKNHjxCUk89EapdIU5YO8LAOGhEPtjc
SSRs:
What I used (No affiliation. not saying it is the best, cheapest or safest. Others maybe better/cheaper):
uk.farnell.com/crydom/cwd2425/ssr-25a-240vac/dp/1613781
Discussion Link for other options and Ideas re SSR Setups:
facebook.com/groups/TEVO.Tornado.Owners/search/?query=ssr&epa=SEARCH_BOX
Power Supply (no afiliation):
Meanwell LRS-150-24 (This is 220v - Check if you are 110v)
Old Moaning Tornado Safety Video:
youtu.be/fsY-H7bZ9x0
These smoke alarm and shut-off systems are hobby grade projects made in my spare time and are not intended to be a substitute for monitoring your 3d printer. Use at your own risk and never leave your 3d printer unattended. If you are in doubt about working with mains power then leave it alone and ask somebody who is qualified to help you.
Good luck all.
Overview of Mods to my Tevo Tornado and Reprap Atom X Printers:
Link to 433Mhz Shutoff System:
Video: youtu.be/n-JgQ3SaVME
Files: drive.google.com/open?id=1nXcDwCVmPUcDuk1CiX6P3krTGfCGPx34
Octopi Temp Failsafe & Smartplug Howto:
Video: youtu.be/6kWmHCm7L8I
Octopi 3d Printer Monitor Wemos D1:
thingiverse.com/thing:2884823
Tevo Tornado Bed Cable Strain Relief Options:
thingiverse.com/search?q=tevo+tornado+strain+relief&dwh=985cf9868a4fef0
Box End TPU Strain Relief:
drive.google.com/open?id=19u7NFEU0l3z4JmzPm4mFaS9OcBOtrpKh
My Logitech C270 Simple Camera Mount:
thingiverse.com/thing:3662572
Hacked FireAngel Smoke Alarm Code (still draft but works fine for me - feel free to modify and improve):
drive.google.com/open?id=139xRYbk741onWTzqSe_t0VkfEefZBje1
(Schematic to follow)
Bed Level Reminder:
thingiverse.com/thing:2685349
My Tornado Firmware:
drive.google.com/open?id=1D324ZTjnWXQDUAdmHwy0ywlf3zv1T10W
My AtomX Files:
drive.google.com/open?id=0BzujMMpM5EE4NUNkU3F3RW9XSk0
Spool Holder:
thingiverse.com/thing:2740809
Y Motor Brace:
thingiverse.com/thing:2734468
Tornado Filament Guide:
thingiverse.com/thing:2829160?fbclid=IwAR1t_g1HzWxLiN7tM3pNzixcdAbhVKNHjxCUk89EapdIU5YO8LAOGhEPtjc
SSRs:
What I used (No affiliation. not saying it is the best, cheapest or safest. Others maybe better/cheaper):
uk.farnell.com/crydom/cwd2425/ssr-25a-240vac/dp/1613781
Discussion Link for other options and Ideas re SSR Setups:
facebook.com/groups/TEVO.Tornado.Owners/search/?query=ssr&epa=SEARCH_BOX
Power Supply (no afiliation):
Meanwell LRS-150-24 (This is 220v - Check if you are 110v)
Old Moaning Tornado Safety Video:
youtu.be/fsY-H7bZ9x0
These smoke alarm and shut-off systems are hobby grade projects made in my spare time and are not intended to be a substitute for monitoring your 3d printer. Use at your own risk and never leave your 3d printer unattended. If you are in doubt about working with mains power then leave it alone and ask somebody who is qualified to help you.
Good luck all.



![eBay C64: Numerous Faults & Repairs (250407)
This C64 had been in the wars. After cleaning and fixing some obvious faults, it lead me a merry dance, despite repeatedly passing diagnostic tests! The diag cart reported the bad RAM (which I should have paid more attention to) but missed a flaky PLA and a glitchy SID.
List of faults & fixes with timestamps:
Pre-powerup tests 00:35
Graft new leg onto VIC II Chip 02:38
Out of Memory Piggyback RAM tests 03:44
Case repair using Acetone 06:07
Strange PLA graphics issue 06:56
Gitchy SID 09:04
Cleanup montage 05:54
Good Luck All
SID Test Program:
http://hackjunk.com/tag/c64-sid-test/
Memtest Program:
https://csdb.dk/release/?id=158763
Music Credits:
––––––––––––––––––––––––––––––
Track: Affect — Vishmak [Audio Library Release]
Music provided by Audio Library Plus
Watch: https://youtu.be/5uh7qw3NPWA
Free Download / Stream: http://alplus.io/AffectVishmak
––––––––––––––––––––––––––––––
🎵 Track Info:
Title: Affect by Vishmak
Genre and Mood: Dance & Electronic + Dramatic
License: Royalty free music for YouTube, Facebook and Instagram videos giving the appropriate credit.
——— eBay C64: Numerous Faults & Repairs (250407)](https://i.ytimg.com/vi/aId19TE2P68/mqdefault.jpg)


![Making and Testing a DodgyPLA (Open Source CPLD PLA for C64)
Thought I would test the limits of my home etching and build a few CPLD PLAs for the Commodore 64.
Video shows cold toner transfer method, building of board from scratch, programming with a Xilinx programmer and iMPACT and then a quick test in one of my fussiest C64s with an especially fussy Super Zaxxon cartridge.
Good Luck All.
Links:
DodgyPLA (board, schematics, .jed files):
https://github.com/desaster/c64-dodgypla
Cold Toner Transfer better explanation:
https://www.youtube.com/watch?v=HBIxvwZ_0og
Xilinx Software:
Making Xilinx Software work on Windows 10:
https://www.youtube.com/watch?v=VMEIPCjqinA
Firmware Used: (.jed file)
https://github.com/hackup/c64-dodgypla (link to .jed file used here)
Other DodgyPLA Builds:
XCPLA Build:
https://www.hackup.net/2019/06/the-xcpla-yet-another-pla-replacement/nggallery/slideshow
Kludge Build: (.jed, gerbers for fab house etc)
https://gitlab.com/kludge/dodgypla
All of these are based on original work by skoe:
https://bitbucket.org/skoe/pla/src/default/
Detailed Analysis of the C64 PLA:
http://skoe.de/docs/c64-dissected/pla/c64_pla_dissected_a4ds.pdf
Music:
––––––––––––––––––––––––––––––
Track: Affect — Vishmak [Audio Library Release]
Music provided by Audio Library Plus
Watch: https://youtu.be/5uh7qw3NPWA
Free Download / Stream: http://alplus.io/AffectVishmak
––––––––––––––––––––––––––––––
🎵 Track Info:
Title: Affect by Vishmak
Genre and Mood: Dance & Electronic + Dramatic
License: Royalty free music for YouTube, Facebook and Instagram videos giving the appropriate credit.
———
😊 Vishmak:
Spotify: https://open.spotify.com/artist/18xeE...
YouTube: https://www.youtube.com/channel/UC7QU...
Instagram: https://www.instagram.com/the_vishmak/
SoundCloud: https://soundcloud.com/vishmak
———
🎧 Listen to all our releases on our Spotify playlist: http://alplus.io/spotify
——— Making and Testing a DodgyPLA (Open Source CPLD PLA for C64)](https://i.ytimg.com/vi/cS_TPp0BAB8/mqdefault.jpg)



