Uploaded April 2023 | Updated September 2026, 6 days ago

---

Beagle Camera with Four Time-lapse Video Mode - Clean, Normal, Timer, and UV:

1. Clean Time-lapse Video Mode (For FDM 3D Printer):
This mode is designed for model growth. Once one layer is completed, the Beagle camera will send a command to move the hot end and capture the image.

2. Normal Time-lapse Video Mode (For FDM 3D Printer):
The camera captures an image when one layer is done, but the camera does not send the commands to move the hot end.

3. Timer Time-lapse Video Mode (Without 3D Printer):
This mode captures an image using a timer. You can use it to document the procedure of assembly, flower growth, sunrise, and more, making it suitable for a wide range of applications beyond 3D printing.

4. Beagle UV Time-lapse Video Mode (For LCD/Resin 3D Printer):
Designed especially for resin 3d printing. With UV sensor communication, the camera will capture the image when the UV sensor is active, creating a stable time-lapse video. An additional product- a UV sensor- is required to enable this feature.

For more detail, please reach this link to check: bit.ly/3vTP4Js

#3dprinting #3dprinted #3dprinter #3dprint #beagleprint #beaglecamera #3dprintercamera #timelaps #uvtimelapse #LCD #FDM #resin #filament

More about Mintion:
👉 mintion.net

Buy Mintion | Beagle Camera | 3D Printer Camera
👉 mintion.net/products/mintion-beagle-camera

Amazon for CA
👉 amzn.to/3JCqqVS

Amazon for the USA
👉 amzn.to/3ZZqDYi

Buy Mintion | Beagle V2 Camera | 3D Printer Camera
👉 mintion.net/products/mintion-beagle-v2-3d-printer-camera

Buy Mintion | Beagle V2 Camera | 3D Printer Camera from Amazon
👉bitly.ws/Kgat

Beagle UV Sensor
👉 reurl.cc/qLpMMp

3D Printer Tools Kit
👉 amzn.to/41aKKDg