Uploaded May 2018 | Updated September 2026, 3 hours ago
Today we'll be building this awesome design spiral speakers!
They look and sound absolutely brilliant! Is this best looking 3D printed speaker? Let me know in the comments bellow.
Disclaimer:
The authors of this design, concept and 3D model - formerly called Akemake, now operating as DEEPTIME - are manufacturing professional version of Spirula speakers with enclosures 3d printed from sand. What you are seeing in the video is a cheap plastic filament DIY hobby version of the Spirula speakers that is not comparable in audio or enclosure material quality with the professionally produced speakers by DEEPTIME. The DEEPTIME studio produces Spirula speakers optimized for specific drivers and with enclosures printed from one piece without split lines, seams or bolts holding them together. If you are curious how such spiral-shaped 3D printed speakers could look and sound like when done properly, please visit http://www.deeptime.limited
List of parts and components for cheap DIY version of these spiral speakers:
Audio labs 4 inch (8ohm) Speakers -- goo.gl/EVTZP4
Mini Bluetooth Amplifier -- bit.ly/2td5Jvd
Recommended 3D printer for this project:
Get the new Creality CR10 V2 3D printer from:
Amazon - amzn.to/33y8DYi
Banggood - bit.ly/34Ju9Jz
WOOD/PURE Filament (You need at least 2 rolls 30% infill)
Aprintapro PURE Filament sadly is no longer available.
Print time with simplified 3D is around 16 hours per one side enclosure at 30% infill. With Cura 3.2.1 is around 24 hours as CURA use much more traveling.
Speaker seal ring(3D printed flex) -- goo.gl/G4YREY
Speaker spikes(3D printed) -- goo.gl/tvdeXG
Sadly STL files are no longer available but I found similar design:
thingiverse.com/thing:1328923
thingiverse.com/thing:1236574
Popular Online retailers:
Amazon.com - amzn.to/3k08g0K
Amazon.ca - amzn.to/3c3efiJ
Amazon.de - amzn.to/3rnvj9l
Amazon.co.uk - amzn.to/3blB2qY
Amazon.se - amzn.to/3bhU55l
Aliexpress - bit.ly/2GWF50w
Banggood - bit.ly/2T0R8fG
Ebay - ebay.us/OJuoTs
Gear that I use for my videos:
nexi-tech.com/gear-that-i-use-for-my-videos
You like what I do? Support me on Patreon
patreon.com/Nexi_Tech
I put a lot of effort and time in my videos and I would appreciate if you click on the ''Like'' and ''subscribe'' button.
Thank you so much for your support.
Best Regards!
Nexi
Music in video:
Background music:
Ambient song in video:
Envato Market
Licensor's Author Username:
FreeHands
Licensee:
NexiTech
Item Title:
Kyushu Sunset
Vocal samples from: -- audioblocks.com
Song: Disclosure - Latch (Ehrling Remix) (Vlog No Copyright
Music)
Music provided by Vlog No Copyright Music.
Video Link: youtu.be/VUZmwZ6aPVE
Song: Young Believer - Running Back to You ft.Kylé
Music provided by Twin Pillars Records
Video Link: youtu.be/VPKF7u6-7P8
Today we'll be building this awesome design spiral speakers!
They look and sound absolutely brilliant! Is this best looking 3D printed speaker? Let me know in the comments bellow.
Disclaimer:
The authors of this design, concept and 3D model - formerly called Akemake, now operating as DEEPTIME - are manufacturing professional version of Spirula speakers with enclosures 3d printed from sand. What you are seeing in the video is a cheap plastic filament DIY hobby version of the Spirula speakers that is not comparable in audio or enclosure material quality with the professionally produced speakers by DEEPTIME. The DEEPTIME studio produces Spirula speakers optimized for specific drivers and with enclosures printed from one piece without split lines, seams or bolts holding them together. If you are curious how such spiral-shaped 3D printed speakers could look and sound like when done properly, please visit http://www.deeptime.limited
List of parts and components for cheap DIY version of these spiral speakers:
Audio labs 4 inch (8ohm) Speakers -- goo.gl/EVTZP4
Mini Bluetooth Amplifier -- bit.ly/2td5Jvd
Recommended 3D printer for this project:
Get the new Creality CR10 V2 3D printer from:
Amazon - amzn.to/33y8DYi
Banggood - bit.ly/34Ju9Jz
WOOD/PURE Filament (You need at least 2 rolls 30% infill)
Aprintapro PURE Filament sadly is no longer available.
Print time with simplified 3D is around 16 hours per one side enclosure at 30% infill. With Cura 3.2.1 is around 24 hours as CURA use much more traveling.
Speaker seal ring(3D printed flex) -- goo.gl/G4YREY
Speaker spikes(3D printed) -- goo.gl/tvdeXG
Sadly STL files are no longer available but I found similar design:
thingiverse.com/thing:1328923
thingiverse.com/thing:1236574
Popular Online retailers:
Amazon.com - amzn.to/3k08g0K
Amazon.ca - amzn.to/3c3efiJ
Amazon.de - amzn.to/3rnvj9l
Amazon.co.uk - amzn.to/3blB2qY
Amazon.se - amzn.to/3bhU55l
Aliexpress - bit.ly/2GWF50w
Banggood - bit.ly/2T0R8fG
Ebay - ebay.us/OJuoTs
Gear that I use for my videos:
nexi-tech.com/gear-that-i-use-for-my-videos
You like what I do? Support me on Patreon
patreon.com/Nexi_Tech
I put a lot of effort and time in my videos and I would appreciate if you click on the ''Like'' and ''subscribe'' button.
Thank you so much for your support.
Best Regards!
Nexi
Music in video:
Background music:
Ambient song in video:
Envato Market
Licensor's Author Username:
FreeHands
Licensee:
NexiTech
Item Title:
Kyushu Sunset
Vocal samples from: -- audioblocks.com
Song: Disclosure - Latch (Ehrling Remix) (Vlog No Copyright
Music)
Music provided by Vlog No Copyright Music.
Video Link: youtu.be/VUZmwZ6aPVE
Song: Young Believer - Running Back to You ft.Kylé
Music provided by Twin Pillars Records
Video Link: youtu.be/VPKF7u6-7P8
