rctestflight | 3D Printed RC Lifting Body Aircraft? - RCTESTFLIGHT @rctestflight | Uploaded 5 years ago | Updated 21 hours ago
Install Raid for Free ✅ IOS: clik.cc/rSEbJ ✅ ANDROID: clik.cc/MglMr Start with 50K silver and get a Free Epic Champion 💥 on day 7 of “New Player Rewards” program.
Testing my 3D printed lifting body aircraft. The point of this project was to design an aircraft that would only fly if it first dove straight down to build up enough speed to pull up to horizontal flight right before landing.
STL files for this Lifting Body: thingiverse.com/thing:3584543
I've since received enough lifting body submissions, but here were the requirements:
- Should be simple to build (few components)
- Can be printed on CR10 (300*300*500)
- Mounting holes for 20.5mm flight controller
- Mounting location for FPV cam
- Enough room in the front for enough weight to get the CG right
- Check my design in the link above for reference
- Send me the design at rctestflight@gmail.com
Install Raid for Free ✅ IOS: clik.cc/rSEbJ ✅ ANDROID: clik.cc/MglMr Start with 50K silver and get a Free Epic Champion 💥 on day 7 of “New Player Rewards” program.
Testing my 3D printed lifting body aircraft. The point of this project was to design an aircraft that would only fly if it first dove straight down to build up enough speed to pull up to horizontal flight right before landing.
STL files for this Lifting Body: thingiverse.com/thing:3584543
I've since received enough lifting body submissions, but here were the requirements:
- Should be simple to build (few components)
- Can be printed on CR10 (300*300*500)
- Mounting holes for 20.5mm flight controller
- Mounting location for FPV cam
- Enough room in the front for enough weight to get the CG right
- Check my design in the link above for reference
- Send me the design at rctestflight@gmail.com