Uploaded February 2025 | Updated November 2026, 3 hours ago
STL's and design info: fpfdesigns.com
Fiber Laser (metal, plastic, glass): fpfdesigns.com/r/ga30mopafiber
LED Laser (wood): fpfdesigns.com/r/falcon2pro60w
PLA Filament: fpfdesigns.com/r/plabasicblack
Lathe: precisionmatthews.com/shop/pm-1022v-pm-1030v
Fiber Laser Settings for Stainless Steel Oxide Marking to Glass: 90% power, 1000mm/sec, 20 kHz, 250ns q-pulse, .01 line interval
Fiber Laser Settings for Marking PLA: 25% power, 3600mm/sec, 50 kHz, 80ns q-pulse, .03 line interval, cross-hatch
LED Laser Settings for Cutting 12mm Wood: 90% power, 250mm/sec
Outro music is "Quantum" by "Vapora", used with explicit permission from the artist. youtu.be/iuntoCBZJfA
Other music used is "Strangers" by "Vapora", used with explicit permission from the artist.
youtu.be/yH7oeynOLlE
New videos published every Friday, featuring a new 3D printed functional object, how I use it, and design considerations.
fpfdesigns.com
The design depicted in this video is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License or other non-commercial license.
Monport GA 30
GA30
stainless steel
marking on glass
Creality Falcon 60w
oxides
oxide
melt
fpf
PLA
Some of the links above are affiliate links. If you purchase through these links, you still pay the same price, but I also earn a small commission, which I really appreciate. Thank You.
STL's and design info: fpfdesigns.com
Fiber Laser (metal, plastic, glass): fpfdesigns.com/r/ga30mopafiber
LED Laser (wood): fpfdesigns.com/r/falcon2pro60w
PLA Filament: fpfdesigns.com/r/plabasicblack
Lathe: precisionmatthews.com/shop/pm-1022v-pm-1030v
Fiber Laser Settings for Stainless Steel Oxide Marking to Glass: 90% power, 1000mm/sec, 20 kHz, 250ns q-pulse, .01 line interval
Fiber Laser Settings for Marking PLA: 25% power, 3600mm/sec, 50 kHz, 80ns q-pulse, .03 line interval, cross-hatch
LED Laser Settings for Cutting 12mm Wood: 90% power, 250mm/sec
Outro music is "Quantum" by "Vapora", used with explicit permission from the artist. youtu.be/iuntoCBZJfA
Other music used is "Strangers" by "Vapora", used with explicit permission from the artist.
youtu.be/yH7oeynOLlE
New videos published every Friday, featuring a new 3D printed functional object, how I use it, and design considerations.
fpfdesigns.com
The design depicted in this video is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License or other non-commercial license.
Monport GA 30
GA30
stainless steel
marking on glass
Creality Falcon 60w
oxides
oxide
melt
fpf
PLA
Some of the links above are affiliate links. If you purchase through these links, you still pay the same price, but I also earn a small commission, which I really appreciate. Thank You.










