Uploaded April 2020 | Updated November 2026, 2 hours ago
In this episode, we will be looking at curing ELEGOO Water Washable 3D Printer Rapid Resin LCD UV-Curing Resin 405nm Standard Photopolymer Resin (see more here: amzn.to/2X9yJR3 ) with a UV light (see more here: amzn.to/34fdui5 ) and wow did this off gas! For the testing used our Air Quality Meter (see more here: amzn.to/3aIKVw8 ) to measure formaldehyde, VOC's and particles.
Want to see what we are up to daily? Check out our regular YouTube Blog posts at: diy3dtech.com/blog
Please visit DIY3DTech.com for more information on this and many other projects!
Check us out on Social Media to see what we are up too as we always have something cooking in the shop!
-Follow us on Instagram:
instagram.com/diy3dtech
-Follow us on Tumblr:
tumblr.com/blog/diy3dtech
-Follow us on Reddit:
reddit.com/user/DIY3Dtech
Subscribe to the DIY3DTech YouTube Channel:
YouTube.DIY3DTech.com
Subscribe to the DIY3DTech OpenSCAD Channel:
openscad-youtube.diy3dtech.com
If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: swag.DIY3DTech.com
Are you a retailer or product manufacture and would like your product reviewed? Please contact us at info[at]diy3dtech.com
Tags: #DIY3Dtech
In this episode, we will be looking at curing ELEGOO Water Washable 3D Printer Rapid Resin LCD UV-Curing Resin 405nm Standard Photopolymer Resin (see more here: amzn.to/2X9yJR3 ) with a UV light (see more here: amzn.to/34fdui5 ) and wow did this off gas! For the testing used our Air Quality Meter (see more here: amzn.to/3aIKVw8 ) to measure formaldehyde, VOC's and particles.
Want to see what we are up to daily? Check out our regular YouTube Blog posts at: diy3dtech.com/blog
Please visit DIY3DTech.com for more information on this and many other projects!
Check us out on Social Media to see what we are up too as we always have something cooking in the shop!
-Follow us on Instagram:
instagram.com/diy3dtech
-Follow us on Tumblr:
tumblr.com/blog/diy3dtech
-Follow us on Reddit:
reddit.com/user/DIY3Dtech
Subscribe to the DIY3DTech YouTube Channel:
YouTube.DIY3DTech.com
Subscribe to the DIY3DTech OpenSCAD Channel:
openscad-youtube.diy3dtech.com
If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: swag.DIY3DTech.com
Are you a retailer or product manufacture and would like your product reviewed? Please contact us at info[at]diy3dtech.com
Tags: #DIY3Dtech
![Shop Talk - 3D Printing Saved My Band Saw!
In this episode, we will be taking a look at how 3D printed new wheels for my Delta 28-195 Band Saw! I designed up a replacement set in Fusion 360 and printed with TPU (see more here: http://diy3dtech.com/tpu ) on my Creality CR-10 (see more here: https://amzn.to/2Ka6fyZ ). You can also check as there are several other version of this desktop band saw which have been re-branded that this should also work for.
Thingiverse Files: https://www.thingiverse.com/thing:4277849
Want to see what we are up to daily? Check out our regular YouTube Blog posts at: http://diy3dtech.com/blog
Please visit http://www.DIY3DTech.com for more information on this and many other projects!
Check us out on Social Media to see what we are up too as we always have something cooking in the shop!
-Follow us on Instagram:
https://www.instagram.com/diy3dtech/
-Follow us on Tumblr:
https://www.tumblr.com/blog/diy3dtech
-Follow us on Reddit:
https://www.reddit.com/user/DIY3Dtech
Subscribe to the DIY3DTech YouTube Channel:
http://YouTube.DIY3DTech.com
Subscribe to the DIY3DTech OpenSCAD Channel:
http://openscad-youtube.diy3dtech.com
If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: http://swag.DIY3DTech.com
Are you a retailer or product manufacture and would like your product reviewed? Please contact us at info[at]diy3dtech.com
Tags: #DIY3Dtech Shop Talk - 3D Printing Saved My Band Saw!](https://i.ytimg.com/vi/WyL9hQkn1s0/mqdefault.jpg)
![Shop Talk - I Kissed Cura Goodbye!
In this episode, we will be talking about why I kissed CURA Goodbye and why you might want to also! Also you can see in the video, I was having issues with my llarger printer and I was pulling my hair out (Note I need all the hair I can keep) and nothing was working till switched slicers and Boom as Titan Gilroy would say the issue went away! Also yes before you ask I fresh installs, different machines no luck so much like the The Piña Colada Song by Rupert Holmes I decided it was time for a change and change I did and I couldnt be happier!
Here is where you can go to get the Kiss Slicer: http://www.kisslicer.com/ However you will need to watch the video for the selection criteria.
Also, there are many things I have found in the past couple months of using it which amaze me! One is the circular infill, as I have had many positive experiences with this!
Want to see what we are up to daily? Check out our regular YouTube Blog posts at: http://diy3dtech.com/blog
Please visit http://www.DIY3DTech.com for more information on this and many other projects!
Follow us on Instagram:
https://www.instagram.com/diy3dtech/ to what we are up too as we always have something cooking in the shop!
Subscribe to the DIY3DTech YouTube Channel:
http://YouTube.DIY3DTech.com
Subscribe to the DIY3DTech OpenSCAD Channel:
http://openscad-youtube.diy3dtech.com
If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: http://swag.DIY3DTech.com
Are you a retailer or product manufacture and would like your product reviewed? Please contact us at info[at]diy3dtech.com
Tags: #DIY3Dtech Shop Talk - I Kissed Cura Goodbye!](https://i.ytimg.com/vi/XOQGim_Fng8/mqdefault.jpg)
![JGAURORA Magic - Stress Tested WIth Success!
In this episode, we will be stress testing the JG Maker Magic as many of you have been asking to see more so here it is this is printing a zillion tiny cubes on the surface of this block (the design is for another video) and I selected the JGAURORA Magic as I wanted to see just good this printer to could stand up to these tightly printed blocks! Well I was NOT disappointed as this was a 10 hour plus print and came out great!
If your looking to get into 3D printing, I would recommend this simple to build semi-kit and its super affordable! Also if your looking for a high quality affordable printer for your print farm (as I was) then this also fits the bill! You can see much here: http://diy3dtech.com/JGAURORA_Magic_High_Presicion_3D_Printer
Want to see more about this 3D Printer, well check out this playlist: https://www.youtube.com/playlist?list=PLInTrkIbj69nH_nCP2iCZz2b3SYNk6lgc&disable_polymer=true for more videos!
Looking for the best deals on 3D Printers or maybe just want to see what new, this link is for you: http://diy3dtech.com/Current_GearBest_3D_Printer_Deals
Want to see what we are up to daily? Check out our regular YouTube Blog posts at: http://diy3dtech.com/blog
Please visit http://www.DIY3DTech.com for more information on this and many other projects!
Follow us on Instagram:
https://www.instagram.com/diy3dtech/ to what we are up too as we always have something cooking in the shop!
Subscribe to the DIY3DTech YouTube Channel:
http://YouTube.DIY3DTech.com
Subscribe to the DIY3DTech OpenSCAD Channel:
http://openscad-youtube.diy3dtech.com
If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: http://swag.DIY3DTech.com
Are you a retailer or product manufacture and would like your product reviewed? Please contact us at info[at]diy3dtech.com JGAURORA Magic - Stress Tested WIth Success!](https://i.ytimg.com/vi/XUmBB-nctOc/mqdefault.jpg)


![Ortur Laser - Adjustable Air Assist (Diode Laser)!
In this episode, we will be looking at a new adjustable air-assist module for the Ortur Laser and and basically any other similar diode lasers! As covered out in other videos, air assist modules are must haves for any laser!
Pieces required for this project:
-Download Model: https://designstore.diy3dtech.com/adjustable-ortur-laser-air-assist-module/
-6mm Hose: https://amzn.to/31vTgkb
-M3 Bolts: https://amzn.to/3dOEI3P
-MK8 Nozzles: https://amzn.to/31OkP8z
-1/4-20 Nylon Bolt: https://amzn.to/3eMK7J6
-Small Air Compressor: https://amzn.to/3iZ5nfU
Want to see what we are up to daily? Check out our regular YouTube Blog posts at: http://diy3dtech.com/blog
Please visit http://www.DIY3DTech.com for more information on this and many other projects!
Check us out on Social Media to see what we are up too as we always have something cooking in the shop!
-Follow us on Instagram:
https://www.instagram.com/diy3dtech/
-Follow us on Tumblr:
https://www.tumblr.com/blog/diy3dtech
-Follow us on Reddit:
https://www.reddit.com/user/DIY3Dtech
Subscribe to the DIY3DTech YouTube Channel:
http://YouTube.DIY3DTech.com
Subscribe to the DIY3DTech OpenSCAD Channel:
http://openscad-youtube.diy3dtech.com
If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: http://swag.DIY3DTech.com
Are you a retailer or product manufacture and would like your product reviewed? Please contact us at info[at]diy3dtech.com
Tags: #DIY3Dtech Ortur Laser - Adjustable Air Assist (Diode Laser)!](https://i.ytimg.com/vi/Z8M3MkM7mbk/mqdefault.jpg)
![eBay K40 CO2 Laser - Shimming and Gantry Adjustment Part 4!
In this episode, we will be showing how to shim and adjust the gantry of the eBay / k40 CO2 laser to optimize the cutting of area of what is typically a very small area.
Want to see what we are up to daily? Check out our regular YouTube Blog posts at: http://diy3dtech.com/blog
Please visit http://www.DIY3DTech.com for more information on this and many other projects!
Check us out on Social Media to see what we are up too as we always have something cooking in the shop!
-Follow us on Instagram:
https://www.instagram.com/diy3dtech/
-Follow us on Tumblr:
https://www.tumblr.com/blog/diy3dtech
-Follow us on Reddit:
https://www.reddit.com/user/DIY3Dtech
Subscribe to the DIY3DTech YouTube Channel:
http://YouTube.DIY3DTech.com
Subscribe to the DIY3DTech OpenSCAD Channel:
http://openscad-youtube.diy3dtech.com
If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: http://swag.DIY3DTech.com
Are you a retailer or product manufacture and would like your product reviewed? Please contact us at info[at]diy3dtech.com
Tags: #DIY3Dtech eBay K40 CO2 Laser - Shimming and Gantry Adjustment Part 4!](https://i.ytimg.com/vi/ZRTQO6XrIqE/mqdefault.jpg)
![Inkscape Tutorial - Easy Map Creation for Laser Engraving!
In this episode, we will be showing you the easy way to create maps for laser engraving various projects. This is supper simple and best of all uses free resources! As we will use https://mapstyle.withgoogle.com/ to create a customized map and Inkscape (a free vector design program: https://inkscape.org/ ) which we will use to the raster screen captured image to an SVG.
Also be sure to check our Ortur Laser Resource Page: http://diy3dtech.com/ortur-laser-resource-page/
Our Preferred 450nm laser safety glasses: http://diy3dtech.com/Professional_Violet_Blue_Laser_Safety_Glasses
Must have G8 replacement lens: http://diy3dtech.com/G8-Laser-Lens
3D Printable Ortur Large Format Laser Upgrade Parts:
-Leg Retainers: https://www.thingiverse.com/thing:4487570
-Cable Management: https://www.thingiverse.com/thing:4488811
-Laser Focus Knob: https://www.thingiverse.com/thing:4487510
-Laser Air Assist: https://www.thingiverse.com/thing:4575561
Other useful parts:
-9mm x 0.5mm lens barrel tap: https://amzn.to/3ld5CpA
-Slicone tubing for air assist: https://amzn.to/2Qd8xAh
-Small Air Compressor: https://amzn.to/3iZ5nfU
SVG Grid: http://diy3dtech.com/wp-content/uploads/2020/07/Ortur_Grid_02.zip
Ventilation Components:
-4 Inch Desktop Hood: https://amzn.to/3eETmcI
-4 Inch x 25 Foot Hose: https://amzn.to/2OyhXp1
-4 Inch Blast Gate: https://amzn.to/3eDxjDh
-4 Inch In-Line DC Fan: https://amzn.to/2CkUuFp
-4 Inch Adjustable Clamps: https://amzn.to/397sjWv
Preferred Control Software (LightBurn): https://lightburnsoftware.com/
Also if you want to learn more about laser safety, we have linked a PDF form Laser Vision which we recommend as well as their products too: http://diy3dtech.com/guide-to-laser-safety-glasses/
Want to see what we are up to daily? Check out our regular YouTube Blog posts at: http://diy3dtech.com/blog
Please visit http://www.DIY3DTech.com for more information on this and many other projects!
Check us out on Social Media to see what we are up too as we always have something cooking in the shop!
-Follow us on Instagram:
https://www.instagram.com/diy3dtech/
-Follow us on Tumblr:
https://www.tumblr.com/blog/diy3dtech
-Follow us on Reddit:
https://www.reddit.com/user/DIY3Dtech
Subscribe to the DIY3DTech YouTube Channel:
http://YouTube.DIY3DTech.com
Subscribe to the DIY3DTech OpenSCAD Channel:
http://openscad-youtube.diy3dtech.com
If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: http://swag.DIY3DTech.com
Are you a retailer or product manufacture and would like your product reviewed? Please contact us at info[at]diy3dtech.com
Tags: #DIY3Dtech Inkscape Tutorial - Easy Map Creation for Laser Engraving!](https://i.ytimg.com/vi/ZTEzOqq5RF8/mqdefault.jpg)
![At The Printer Talking Phenolic Sheeting for PETG!
In this episode, we will be taking a quick look at using Phenolic Sheet (see more here: http://diy3dtech.com/Phenolic_Sheet_PETG ) to print PETG on! This was suggested by several views so figured I would give it a shot and it worked and worked well in that!
Want to see what we are up to daily? Check out our regular YouTube Blog posts at: http://diy3dtech.com/blog
Please visit http://www.DIY3DTech.com for more information on this and many other projects!
Check us out on Social Media to see what we are up too as we always have something cooking in the shop!
-Follow us on Instagram:
https://www.instagram.com/diy3dtech/
-Follow us on Tumblr:
https://www.tumblr.com/blog/diy3dtech
-Follow us on Reddit:
https://www.reddit.com/user/DIY3Dtech
Subscribe to the DIY3DTech YouTube Channel:
http://YouTube.DIY3DTech.com
Subscribe to the DIY3DTech OpenSCAD Channel:
http://openscad-youtube.diy3dtech.com
If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: http://swag.DIY3DTech.com
Are you a retailer or product manufacture and would like your product reviewed? Please contact us at info[at]diy3dtech.com
Tags: #DIY3Dtech At The Printer Talking Phenolic Sheeting for PETG!](https://i.ytimg.com/vi/ZzgUK91MzDM/mqdefault.jpg)
![3018 CNC - Amazing 3D Printed Work Holding Clamp!
In this episode, we will be looking at a new work-holding solution which we designed for our 3018 CNC (see more here: ) which we designed in Fusion 360 and printed in PETG (see more here: ) . This unique design allows for effective work holding on this small CNC on the cheap as you can grab this design off of Thingiverse or My Mini Factory with the links below! However please if you make one post a MAKE on either site as a sign of appreciation!
Thnigiverse: https://www.thingiverse.com/thing:4344869
My Mini Factory: https://www.myminifactory.com/object/3d-print-3018-clamping-fixture-121123
Want to see what we are up to daily? Check out our regular YouTube Blog posts at: http://diy3dtech.com/blog
Please visit http://www.DIY3DTech.com for more information on this and many other projects!
Check us out on Social Media to see what we are up too as we always have something cooking in the shop!
-Follow us on Instagram:
https://www.instagram.com/diy3dtech/
-Follow us on Tumblr:
https://www.tumblr.com/blog/diy3dtech
-Follow us on Reddit:
https://www.reddit.com/user/DIY3Dtech
Subscribe to the DIY3DTech YouTube Channel:
http://YouTube.DIY3DTech.com
Subscribe to the DIY3DTech OpenSCAD Channel:
http://openscad-youtube.diy3dtech.com
If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: http://swag.DIY3DTech.com
Are you a retailer or product manufacture and would like your product reviewed? Please contact us at info[at]diy3dtech.com
Tags: #DIY3Dtech 3018 CNC - Amazing 3D Printed Work Holding Clamp!](https://i.ytimg.com/vi/_N2sE2KgyfY/mqdefault.jpg)
![Design Talk - 3D Printable Cabinet Handle Jig!
So we have been building a house over the 2 years and while the bulk is done there seems like a ton of small details and one was adding handles to new cabinetry which was added afterwards, however we needed to ensure the handles match perfectly in location (my wife is super picky when it comes to symmetry) so we designed this! Its a blank Hardware Knob Handle Pull Drill Mounting Template for Cabinet Doors (see more here: https://amzn.to/3d5yKtv ). Now I have a commercial set (again as shown here: Hardware Knob Handle Pull Drill Mounting Template for Cabinet Doors and Drawers ) however since this is our retirement home we went with large spaced handles so our arthritic hands would have an easy time grasping the handles, however the hole spacing was too far off to match the commercial templates. So I printed these, removed the handle from one door, held the blank template up by hand and drilled out the holes. This left us with a perfect match to drill out the new cabinets to match!
I also added the Fusion 360 files so if you want to modify it for either size or programmaticly your own holes you can!
Want to see what we are up to daily? Check out our regular YouTube Blog posts at: http://diy3dtech.com/blog
Please visit http://www.DIY3DTech.com for more information on this and many other projects!
Check us out on Social Media to see what we are up too as we always have something cooking in the shop!
-Follow us on Instagram:
https://www.instagram.com/diy3dtech/
-Follow us on Tumblr:
https://www.tumblr.com/blog/diy3dtech
-Follow us on Reddit:
https://www.reddit.com/user/DIY3Dtech
Subscribe to the DIY3DTech YouTube Channel:
http://YouTube.DIY3DTech.com
Subscribe to the DIY3DTech OpenSCAD Channel:
http://openscad-youtube.diy3dtech.com
If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: http://swag.DIY3DTech.com
Are you a retailer or product manufacture and would like your product reviewed? Please contact us at info[at]diy3dtech.com
Tags: #DIY3Dtech Design Talk - 3D Printable Cabinet Handle Jig!](https://i.ytimg.com/vi/_bzhwKQIFdY/mqdefault.jpg)