Open Green Energy#diylithiumbattery #opengreenenergy #18650batterypack
In this video, I will show how to make a 12V Lithium battery by using 18650 and 32650 Batteries. I have designed 3D printed case for these batteries with a size nearly equal to the traditional 12V UPS battery. I have also added BMS to protect the battery pack from different abnormal situations. Also added a capacity meter to check the voltage and capacity of the battery pack.
Your one-stop PCB prototype Partner PCBWay: pcbway.com
For good quality Lithium batteries in India: https://voltalithiumhub.in/
Note: Before using these batteries check the charger specification of your UPS. Usually, the 4S LiFePo4 battery pack is more suitable for this application because of its nominal voltage of 3.2V.
How to Make 12V Lithium Battery to replace the Old 12V UPS Battery || 12V LiFePo4 || 12V Li-IonOpen Green Energy2022-06-21 | #diylithiumbattery #opengreenenergy #18650batterypack
In this video, I will show how to make a 12V Lithium battery by using 18650 and 32650 Batteries. I have designed 3D printed case for these batteries with a size nearly equal to the traditional 12V UPS battery. I have also added BMS to protect the battery pack from different abnormal situations. Also added a capacity meter to check the voltage and capacity of the battery pack.
Your one-stop PCB prototype Partner PCBWay: pcbway.com
For good quality Lithium batteries in India: https://voltalithiumhub.in/
Note: Before using these batteries check the charger specification of your UPS. Usually, the 4S LiFePo4 battery pack is more suitable for this application because of its nominal voltage of 3.2V.
Soldering SMD LED by using a mini Hot Plate 🔥Short Tour of My Electronics LabOpen Green Energy2022-11-03 | #shorts #studiotour #opengreenenergy
A short tour to my Electronics LabDIY Solar Mason Jar LightOpen Green Energy2022-11-03 | #solarlamp #masonjarcraft #shorts Made this PCB which can turn a jar into a solar lamp.3D printed Solar Bottle LampOpen Green Energy2022-11-02 | #solarlight #shorts #opengreenenergy
I made this 3D printed bottle cap to reuse the plastic bottles to make a Solar Lamp.
Full YouTube Video:Smartphone controlled LED SignOpen Green Energy2022-11-02 | #shorts #ledsign #opengreenenergy
have a 3D printed RGB LED sign board for my studio. The sign board can be controlled from smartphone or desktop PC. I will also guide step by step to configure it with WLED to get awesome effects. You can also pair it with Amazon Alexa or Google Home Assistant.
👉 Buy it from Tindie store : tindie.com/products/opengreenergy/diy-solar-mason-jarDIY Solar Bottle Lamp V2.0Open Green Energy2022-10-24 | #hackadayprize #solarbottlelamps #diwalilightideas In this video, I will show you how to reuse waste plastic bottles to make a beautiful Solar Lamp. I will also explain how the circuit works. I have made a custom PCB and 3D printed enclosure for this project.
The Lamp has 4 working modes: 1. MODE - 1: LOW Brightness ( 24 hours of backup ) 1. MODE - 2: MEDIUM Brightness ( 12 hours of backup ) 1. MODE - 3: HIGH Brightness (6 hours of backup ) 1. MODE - 4: OFF
Place the Solar Bottle Lamp under the sunlight for charging it. You can also charge it through a USB-C cable. The charging time through solar is 8-10 hours and through USB - C is 3hrs.
Your one-stop PCB prototype Partner PCBWay: pcbway.com
Download or Buy PCB : pcbway.com/project/shareproject/DIY_Solar_Bottle_Lamp_Upgraded_Version_e2879ef8.html Download 3D printable enclosure files: thingiverse.com/thing:5584204 ----------------------------- Video Time Stamp ----------------------------- 00:00 - Intro 00:13 - 2 Problems in Society 00:54 - Solution 01:58 - PCB Assembly 02:39 - Hot Plate Reflow Soldering 04:37 - 18650 Battery Pack Building 05:21 - Testing the PCB 06:21 - Enclosure Assembly 09:14 - How to Use 09:42 - Final Product TestingHow to Make a 12V Lead Acid Battery Charger with CC & CV || PCB for 12V Automatic Battery ChargerOpen Green Energy2022-10-16 | #12VUPS #12vbatterycharger #lm317
In this video I will show you how to make a battery charger for 12V lead acid battery commonly used in UPS for desktop PC. The circuit is based on the most popular IC LM317 and few passive components like resistor and capacitors. The charger implements constant current and constant charging mode.
Your one-stop PCB prototype Partner PCBWay: pcbway.com
Following are the Changes from earlier design: 1. Used a 0.5W SMD led with customised pcb instead of strawhat LED 2. Added USB C port for optional charging input 3.Used 18650 battery instead of 14500 battery
In this video, I will show you how I have a 3D printed RGB LED sign board for my studio. The sign board can be controlled from smartphone or desktop PC. I will also guide step by step to configure it with WLED to get awesome effects. You can also pair it with Amazon Alexa or Google Home Assistant.
Your one-stop PCB prototype Partner PCBWay: pcbway.com
5. Hot Air Blower : amzn.to/3RCyEPvDIY Mini Bluetooth Speaker BuildOpen Green Energy2022-07-07 | #DIYBluetoothSpeaker #bluetoothspeakerkaisebanaye #bluetoothspeaker I have made this mini-Bluetooth speaker, the sound and bass quality is awesome.
Full assembling video: youtu.be/y_AffkR5_H8Build 2 Simple DIY Power SuppliesOpen Green Energy2022-07-06 | #powersupply #variablepowersupply #18650batterycharger
This video is about making of 2 easy Power Supplies.
Your one-stop PCB prototype Partner PCBWay: pcbway.com
These power supply can be used for the following purposes: 1. Variable Power Supply 2. Battery Charger 3. LED Driver 4. Solar Charge Controller ------------------------------- Video Time Stamp ------------------------------- 00:00 - Intro 00:33 - Making of Power Supply -1 02:04 - PCBWay Sponsorship 09:08 - Testing of Power Supply-1 10:20 - Making Of Power Supply -2 18:40 - Testing of Power Supply-2 -------------------------------------------------------------------------------------------------- Instructables Link: 1. instructables.com/DIY-Mini-Lab-Power-Supply 2. instructables.com/DIY-Bench-Power-SupplyHow to Make 12V Lithium Battery || 18650 Battery PackOpen Green Energy2022-06-30 | #12voltbattery #18650batterycharger #18650batterypack
Make your 12V Lithium Battery to replace the old lead acid battery. It is lighter and gives more backup time to run the equipment. Full tutorial link: youtu.be/37AjUrUMTNw3 DIY Power Bank Ideas | How to Make Power Bank from Laptop Battery ( 18650 )Open Green Energy2022-06-26 | #18650Powerbank #DIYPowerbank #18650batterypack
In this video, I will share you 3 awesome ideas to make DIY Power Banks by 18650 batteries salvaged from old laptop battery. I have also made the enclosure by using my 3D printer.
Your one-stop PCB prototype Partner PCBWay: pcbway.com
5. Hot Air Blower: amzn.to/3pzzSh2DIY Powerwall by Using 18650 BatteriesOpen Green Energy2022-06-16 | I have tried to make a DIY version of Powerwall. Full video link: youtu.be/2EFopbHgxI0Make this awesome 3D printed Solar Lamp || STEM Education KitOpen Green Energy2022-05-30 | #diykit #stemeducation #diysolarlamp
In this video, I have shown how to make a 3D printed Solar Mason Jar. The building process is super simple. This is an excellent DIY kit for children's STEM education.
Your one-stop PCB prototype Partner PCBWay: pcbway.com
Video Time Stamp -------------------------------------------------- 00:00 - Intro 00:38 - Materials Required 01:14 - PCB received from PCBWay 01:28 - Assembling the PCB 03:55 - 3 variants of PCBs 04:00 - 3D printing of Mason Jar 04:47 - Assembly Instruction for Lamp 07:04 - Testing the Circuit 07:38 - Lamp in OperationTried to Make a Mini DIY Power Wall using 18650 Batteries || 0.5 kWh Battery Pack BuildingOpen Green Energy2022-05-22 | #DIYPowerwall #18650batterypack #diypowerbank
In this video, I have explained what is a tesla powerwall and how a powerwall works. I have also covered the different components of the powerwall and at last, showed the making of a 0.5kWh Li-Ion battery pack by using 18650 batteries. The best thing is that you don't need a spot welder or soldering iron to make the battery pack.
Your one-stop PCB prototype Partner PCBWay: pcbway.com
For Lithium battery: https://voltalithiumhub.in/Make Solar Lamp Using TP4056 | Reuse Plastic Bottles to Make Solar Lamp | Celebrate World Earth DayOpen Green Energy2022-04-25 | #solarbottlelamp #worldearthday #opengreenenergy
In this video, I will show you how to reuse waste plastic bottles to make a beautiful Solar Lamp. I have modified my original design to make the PCB simpler by using TP4056 charger module. The new PCB doesn't have any SMD components, so beginners can make it easily. I have made a custom PCB and 3D printed enclosure for this project. This project can be used for STEM education for children.
Your one-stop PCB prototype Partner PCBWay: pcbway.com
4. Hot glue Gun: amzn.to/3qE8i3OSolar Bottle Lamp by using TP4056 | बेकार प्लास्टिक की बोतल से बनाएं सोलर लैंप | DIY Solar LampOpen Green Energy2022-04-11 | #solarbottlelamp #diysolarlamp #opengreenenergy
In this video, I will show you how to reuse waste plastic bottles to make a beautiful Solar Lamp. I have modified my original design to make the PCB simpler by using TP4056 charger module. The new PCB doesn't have any SMD components, so beginners can make it easily. I have made a custom PCB and 3D printed enclosure for this project. This project can be used for STEM education for children.
Your one-stop PCB prototype Partner PCBWay: pcbway.com
12. 24 AWG Wires: bit.ly/3qKmlFbReuse Plastic Bottle to Make a Solar Bottle LampOpen Green Energy2022-03-25 | #solarbottlelamp #diysolarlamp #reuse
In this video, I will show you how to reuse waste plastic bottles to make a beautiful Solar Lamp. I will also explain how the circuit works. I have made a custom PCB and 3D printed enclosure for this project.
Your one-stop PCB prototype Partner PCBWay: pcbway.com
In this video, I will show you how I have made an Arduino-based capacity tester. This device can be used to check the true capacity of the fake Li-Ion, AA, and AAA rechargeable batteries.
Your one-stop PCB prototype Partner PCBWay: pcbway.com
12. PCB Stand-off: amzn.to/2MYg2ccBest Portable Spot Welding Machine Under $100 || SEQURE SQ-SW2 mini Rechargeable Spot WelderOpen Green Energy2022-01-21 | In this video, I am going to show unboxing and test SQ-SW2 spot welder from SEQURE.
👉 Discount 3% Coupon Code : OGE2021 ================================================= Features: 1. Built-in 10000mAh high-rate battery. 2. Support automatic and manual working modes. 3. The buzzer function reminds. 4. Programmable firmware upgrade. 5. Small size and easy to carry. 6. 1.8-inch LCD color screen, support forward and reverse displayDIY Mini UPS for WiFi Router V5.0 || Multiple Outputs 12V / 9V / 5VOpen Green Energy2021-08-30 | #12vminiups #upsforWiFiRouter #WorkFromHome
This video shows how to make a DIY Mini UPS for WiFi Router. I will guide you step by step on how to make a DIY Mini UPS for WiFi Router by using cheap converter modules and 18650 batteries. I am getting around 7- 8 Hours back in my WiFi Router ( 7W ). I am explaining the schematic also.
Your one-stop PCB prototype Partner PCBWay: pcbway.com
If you have a cool PCB project, you may participate in the 4th PCB Design Contest. bit.ly/2VGFQ4P
Video Time Stamp -------------------------------------------------- 00:00 - Intro 00:50 - Parts List 01:10 - Schematic Diagram and Working 02:14 - Making of 3S battery pack with BMS 05:58 - Enclosure design and 3D printing 06:35 - Preparing the components and Wiring 09:04 - Components Installation in Enclosure 10:04 - Setting Voltage and Current 15:36 - Final Testing ----------------------------------------------------
Disclaimer: I cannot be held responsible for any loss of property, damage, or loss of life if it comes to that. This tutorial was written for those who have knowledge of rechargeable lithium-ion technology. Please do not attempt this if you are a novice. Stay Safe.
7. Nitecore Charger: amzn.to/2GBbMQW / amzn.to/2VoBmMvESP8266 Weather Widget V2.0 || How to Make a Desktop Weather DisplayOpen Green Energy2021-08-10 | In this video, I will show you how to make a weather widget by using ESP8266 and a 2.8" touch screen TFT display.
Your one-stop PCB prototype Partner PCBWay: pcbway.com
If you have a cool PCB project, you may participate in the 4th PCB Design Contest. bit.ly/2VGFQ4P
Note: The TFT display is available in two variants ( With Touch Screen and Without Touch Screen), both will work for this project. In this video, I have used the touch screen variant.
Video Time Stamp -------------------------------------------------- 00:00 - Intro 00:32 - Parts List 01:03 - Preparing the components and Wiring 01:50 - 3D printing Enclosure 03:29 - Getting API Key from Openweathermap website 03:47- Preparing Arduino IDE and Uploading the Code 04:33 - Components Installation in Enclosure 05:24 - Final Testing ----------------------------------------------------
4. Wire Stripper : amzn.to/3yBu1etSEQURE Spot Welder Review and Unboxing || DIY LiFePO4 Battery Pack ( 12.8V / 12Ah )Open Green Energy2021-08-01 | In this video, I will unbox and review a compact spot welder from SEQURE. The spot welder is really nice for making DIY battery packs.
👉 You can buy the spot welder from the following link: 1. Sequre website: bit.ly/2TRmp8O 2. Aliexpress: bit.ly/3AonCFw
👉 Use coupon code SQWELDER to get a discount of 10% ( Offer Valid Upto 7th Aug 2021 )
#DIYbatterypack #diyspotwelder #LiFePo4BatterypackMakingBuild Your Own DIY Soldering Fume Extractor || How to Make Fume Extractor by Using PC FanOpen Green Energy2021-07-16 | DIY Fume Extractor by using a 120mm PC cooling fan and 3D printed enclosure.
This project is successfully completed because of the help and support from NextPCB. Guys if you have a PCB project, please visit their website and get exciting discounts and coupons.
If you are an electronics hobbyist, soldering is essential in almost all of your project, but the smoke/fumes from burnt solder and flux isn’t something you want to breathe. It smells bad and can be very dangerous to your health but you can reduce the hazards by employing a fume extractor. Even if you only solder things once in a while, it's a good idea to have a solder fume extractor to suck in those toxic fumes.
Credit: I found online an amazing 3D printed model that I tweaked and customized in Autodesk Fusion360 according to my needs (source: "instructables.com/Minimalist-3D-Printed-Fume-Extractor" by rdmmkr used under CC BY-NC-SA 4.0 / Modifications: size, 120mm fan, speed control ). CC BY-NC-SA 4.0: creativecommons.org/licenses/by-nc-sa/4.0 I have used a 120 x 25 mm fan whereas the original design is suitable for an 80 x 38 mm fan.
5. Hot Air Blower: amzn.to/3kA9d3cDIY Fast Charging Power Bank from 18650 Battery ( QC3.0) || 3S 12.6V Li-ion 18650 Battery PackOpen Green Energy2021-07-03 | In this video, I will show you how to make a fast-charging power bank by using 18650 laptop battery. The charger can support multiple fast-charging protocols (AFC, QC2.0, QC3.0, FCP/SCP).
NextPCB is one of the most experienced PCB manufacturers in Global, has specialized in the PCB and assembly industry for over 15 years. Not only could NextPCB provide the most innovative printed circuit boards and assembly technologies in the highest quality standards, the fastest delivery turnaround as fast as 24 hours.
7. Multimeter: amzn.to/3t9ULzdMake a 15000 mAh Power Bank from Laptop Battery ( 18650 ) | QC Mobile Power BankOpen Green Energy2021-06-20 | #18650powerbank #diypowerbank #18650laptop battery
In this video, I will show you how to make a 15000mAh Power Bank by using 18650 batteries salvaged from old laptop battery.
I have also made the enclosure by using my 3D printer.
★ Charging cable: support three USB data cable charging, including iPhone and Android.
Note : The positive pole of the battery is connected to B+ and the negative pole is connected to B-, do not reverse it. If it is reversed, it will burn out!!!!
3. 3D printer: amzn.to/3xvblfuDIY Mini UPS for WiFi Router V4.0 || Use Powerbank as UPS for your WiFi router || Work From HomeOpen Green Energy2021-06-14 | #diyupsforwifirouter #12VMiniUps #powerbankUPS
In this video, I will show you how to make a mini UPS for WiFi Router by using a Power bank. The UPS will automatically switch from mains to power bank during the power failure. A 12V relay is used for the changeover, which may cause the router to reboot once because of the slow switching. Your power bank will take around half a second to power up.
5. Hot Air Blower: amzn.to/3pzzSh2DIY 5000 mAh Power Bank | How to Make Power Bank from Laptop Battery ( 18650 )Open Green Energy2021-06-08 | #18650Powerbank #DIYPowerbank #18650Battery
In this video, I will show you how I have built a 5000 mAh Power Bank by using 2 x 18650 Li-Ion battery. The voltage and capacity of each cell are 3.7V and 2500 mAh. I will also show you how to make the 3D printed enclosure for the power bank.
5. Hot Air Blower: amzn.to/3pzzSh2TOP 5 Easy Electronic Projects ( 2021 ) | Electronic Projects by Using LED, DC Motor and TransistorOpen Green Energy2021-06-04 | #electronicprojects #opengreenenergy In this video, I will show you how to make 5 Easy Electronic Projects by using basic parts like motor, led, transistor, resistor, buzzer, and battery.
1. USB Fan by using DC motor and Coke Can 2. Non Contact AC Voltage detector 3. Continuity Tester 4. Polarity Tester 5. Door Bell by using 555 timer
#TOP_5_Electronic_Projects #2021
WARNING: This video is for demonstration and educational purposes only. Each demonstration presents risks and hazards that must be fully understood before attempting. It should be performed only by professionals.
About Music Track: Track Name: Cinematic Documentary Music by AShamaluevMusicDIY Non-Contact Infrared Thermometer | Top DIY IR Thermometer ( 2021 )Open Green Energy2021-05-29 | In this video, I will show you how to make a Non-Contact Infrared Thermometer to measure body temperature without having to come into direct contact with the person's body. The MLX 90614 sensor and Arduino Nano are used to measure body temperature.
NextPCB is one of the most experienced PCB manufacturers in Global, has specialized in the PCB and assembly industry for over 15 years. Not only could NextPCB provide the most innovative printed circuit boards and assembly technologies in the highest quality standards, the fastest delivery turnaround as fast as 24 hours.
12. Jumper Wires: amzn.to/3feRcEw Top 3 Mini UPS for WiFi Router | 12V Mini UPS | Router UPS for Work for HomeOpen Green Energy2021-05-13 | #MiniUPS #UPSforWiFIRouter #UPSforWorkFromHome
In this video, I will share all the 3 versions of my Mini UPS for WiFi Router. This little gadget is really helpful for this work-from-home time.
Disclaimer: ------------------ I cannot be held responsible for any loss of property, damage, or loss of life if it comes to that. This tutorial was written for those who have knowledge of rechargeable lithium-ion technology. Please do not attempt this if you are a novice. Stay Safe.
************************************************************************** Parts Used:
15. 1N5822 Diode: amzn.to/2GOQRJKMake a Solar Panel Monitoring System | ESP32 Energy MonitoringOpen Green Energy2021-05-10 | In this video, I will show you how to make a simple solar panel monitoring system.
JLCPCB: $2 for 1-4 Layer PCBs, Free SMT Coupons:- jlcpcb.com/IYB
By using this device you can monitor the following parameters: 1. Voltage 2. Current 3. Power 4. Energy 5. Ambient Temperature You can also know how much money you are saying by using the Solar Panel.
Specifications:
Input Voltage - 24V ( Max ) Current - 15A ( Max )
You can increase the input voltage range, by selecting appropriate resistors on the voltage divider circuit.
13. Soldering Paste: bit.ly/3eBgxImHow to Make a LiFePO4 Battery Pack with BMS | DIY Battery Pack for Electric Bike and Solar PowerOpen Green Energy2021-05-02 | In this video, I will explain how to make a LiFePO4 battery pack for an electric bike. I will guide step by step, how to connect each cell and how to connect the BMS. This video is made exclusively on the building process of a 12.8V Lithium Iron Phosphate battery for Solar application.
NextPCB is one of the most experienced PCB manufacturers in Global, has specialized in the PCB and assembly industry for over 15 years. Not only could NextPCB provide the most innovative printed circuit boards and assembly technologies in the highest quality standards, the fastest delivery turnaround as fast as 24 hours.
Disclaimer: I cannot be held responsible for any loss of property, damage, or loss of life if it comes to that. This tutorial was written for those who have knowledge of rechargeable lithium-ion technology. Please do not attempt this if you are a novice. Stay Safe.
7. Multimeter: amzn.to/3t9ULzdDIY Solar Powered WiFi Weather Station V3.0 || Monitoring Wind and RainfallOpen Green Energy2021-03-29 | #DIY #WeatherStation #ESP32
Your one-stop PCB prototype Partner PCBWay: pcbway.com
This video is about making my own Solar-powered wireless weather station by using an ESP32 Wifi Module and few common weather sensors available in the market. The weather station is fully solar-powered, so no need to worry about the external power supply. You can install it in a remote place without laying long cables to provide power.
This Weather Station is such compact weather station that consists of several meteorological sensors that measure the following parameters: 1. Internal Temperature (BME280) 2.Humidity (BME280) 3. Barometric Pressure (BME280) 4.External Temperature (DS18B20) 5. Wind Speed ( Sparkfun Weather Meter ) 6. Wind Direction ( Sparkfun Weather Meter ) 7. Rain Gauge ( Sparkfun Weather Meter ) 8. UV Index ( SI1145) 9. Lux Level ( BH1750 )
23. Slide Switch :bit.ly/39oJjZGHow to Make an Automatic Emergency Light || Power Failure Backup LightOpen Green Energy2021-03-07 | #emergencyLight #SolarLampMaking #diyBatteryCharger
This video is about making an emergency light by using an LM317 regulator.
JLCPCB: $2 for 2Layer, 5pcs & $5 for 4Layer, 5pcs: jlcpcb.com
Here I will guide you on how to make a battery charger and later explain the circuit for automatic switching of LED during the power failure. This is a very simple and useful project for college and school.
4. Nose Plier: amzn.to/39El765DIY Mason Jar Solar Lantern || Easy Home Made Solar LampOpen Green Energy2021-02-17 | #diylantern #SolarDecorativeLamp #EasySolarLampMaking
In this video, I will show you how I have made a decorative solar lamp by using a glass jar and solar panel. I have made a custom PCB for this project, so it can be solder easily. I have also shown how to get a different lighting effect by using different LED.
This is project is very useful for STEAM education for kids.
JLCPCB: $2 for 2Layer, 5pcs & $5 for 4Layer, 5pcs: jlcpcb.com
14. Glass Jar: amzn.to/2CPEwTLHow to Make a Solar Emergency Light at Home || DIY 6V Battery Charger with ProtectionOpen Green Energy2021-02-02 | #emergencyLight #SolarLampMaking #diyBatteryCharger
This video is about making of an emergency light by using LM317 regulator.
JLCPCB: $2 for 2Layer, 5pcs & $5 for 4Layer, 5pcs: jlcpcb.com
Here I will guide you how to make a battery charger and later explain the circuit for automatic switching of LED during the power failure. This is a very simple and useful project for college and school.
4. Nose Plier: amzn.to/39El765Simple Battery Charger with Auto Cut-Off Protection | Automatic charger for 12V & 6V BatteryOpen Green Energy2021-01-22 | This video is about making a simple battery charger for 12V and 6V lead-acid batteries. JLCPCB: $2 for 2Layer, 5pcs & $5 for 4Layer, 5pcs: jlcpcb.com
The charger is equipped with the auto cut-off circuit to protect the battery from overcharging. This is a simple battery charging circuit with protection. I have explained the entire circuit step by step. You can use this project for college or school projects.
15. PCB Standoffs: amzn.to/3c2oNA9Universal Battery Charger that can charge any Battery | Liitokala Lii-S6 Battery Charger ReviewOpen Green Energy2021-01-09 | #LiitokalaCharger #UniversalBatteryCharger #ChargerReview
In this video, I will review and unbox a Liitokala Battery Charger. The charger can charge all cylindrical rechargeable batteries 3.7V Li-Ion, 3.8V IMR, 1.2V Ni-MH/Cd, 3.2VLiFePO4. It identifies Li-ion and Ni-MH batteries automatically and adjusts manually the charging mode for LiFePO4 and 3.80V li-ion batteries(IMR). It detects the battery polarity automatically, so don't have to worry about in which direction inserting into the charger.
Amazon Link: amzn.to/3bmFbLBDIY 10,000 mAh Power Bank | How to Make 18650 Battery PackOpen Green Energy2020-12-22 | This video is about making a 10,000mAh power bank by using 4 nos of 18650 batteries. JLCPCB: $2 for 2Layer, 5pcs & $5 for 4Layer, 5pcs: jlcpcb.com
I will also show you how I have prepared the 18650 battery pack.
The power bank has the following features: 1. Dual USB output ports ( 5V / 2A ) 2. 4-level LED display to indicate the charging status 3. Flashlight 4. Built-in lithium battery protection IC, over-current, over-voltage, under-voltage protection
******************************************************************************************** Components Used 1. Power Bank PCB Module: amzn.to/37DMr3g 2. 4 x 18650 Batteries: amzn.to/2WBmsU3 3. 20AWG Wires: amzn.to/380lXYI 4. Enclosure
Tools Used 1. Soldering Iron: amzn.to/3hem5bh 2. Wire Cutter / Stripper: amzn.to/3mAzeN2 3. 3D printer: amzn.to/2WCrEa3DIY Mini Lab Power Supply | Battery Charger | Constant Current LED DriverOpen Green Energy2020-12-12 | This video is about making a Mini Power Supply by using an XL4015 buck converter module. JLCPCB: $2 for 2Layer, 5pcs & $5 for 4Layer, 5pcs: jlcpcb.com
The power supply can be used for the following purposes: 1. Variable Power Supply 2. Battery Charger 3. LED Driver 4. Solar Charge Controller
12. 12-30V DC Power supply: amzn.to/379476ODIY Mini UPS for WiFi Router V3.0 | 12V Mini UPS | Work From HomeOpen Green Energy2020-11-29 | #12vminiups #upsforWiFiRouter #12vups This video shows how to make a DIY Mini UPS for WiFi Router. JLCPCB: $2 for 2Layer, 5pcs & $5 for 4Layer, 5pcs: jlcpcb.com
I will guide you step by step on how to make a DIY Mini UPS for WiFi Router by using an XL4015 buck converter module and XL6019 Boost Converter. I am getting around 5 Hours back in my WiFi Router ( 7W ). I am explaining the schematic also. ----------------------------------------------------------------------------------------------------------------------------------------------------- Instructables link: instructables.com/DIY-Mini-UPS-for-WiFi-Router-V20
Disclaimer: I cannot be held responsible for any loss of property, damage, or loss of life if it comes to that. This tutorial was written for those who have knowledge of rechargeable lithium-ion technology. Please do not attempt this if you are a novice. Stay Safe.
7. Nitecore Charger: amzn.to/2GBbMQW / amzn.to/2VoBmMvPCB Design for DIY Solar Lamp | Automatic Solar Light | 3D printed Solar LampOpen Green Energy2020-11-24 | In this video, I will show you how I have designed the PCB for DIY Solar Lamp by using Autodesk Fusion 360.
This small lamp is mainly designed to get the basic light required for rural people by replacing their harmful kerosine lamp.
******************************************************************************* This project was presented on AU2020, you can watch the full video on the Autodesk page:
12. 1W Solar Panel ( 3 - 5V ): amzn.to/2IXsQBqDIY Solar Lamp | Solar Lamp for Home | Automatic Solar Light | 3D printed Solar LampOpen Green Energy2020-11-20 | #diysolarlamp #solaremergencylight #solargardenlight
In this video, I will show you how I have made a Solar Lamp by using few electronics components. I have made the PCB in Autodesk Fusion 360. Then made the customized 3D printed enclosure for the Lamp.
This small lamp is mainly designed to get the basic light required for rural people by replacing their harmful kerosine lamp.
******************************************************************************* This project was presented on AU2020, you can watch the full video on the Autodesk page: