Philippe Demerliac
Cyrob : Introduction aux MOS-FET épisode I
updated
Article, schéma, liens, etc... sur mon site:
http://philippe.demerliac.free.fr/Articles/CP0153/CP0153.htm
Visitez mon site: http://www.Cyrob.org
Sur Facebook: Cyrob.org
Discord : discord.gg/mNMSE53
Me contacter: info@cyrob.org
Rappel: Je ne vends rien et ne propose aucun service, même payant.
Supporter Cyrob.org :
http://philippe.demerliac.free.fr/Support.htm
00:00 Introduction
00:30 Démo
02:31 Schéma
08:04 Conclusion
10:12 Mo-Riss
Déontologie de la chaine:
http://philippe.demerliac.free.fr/Articles/Policy/Cyrob_Policy.htm
#Cyrob #robotique #electronique
Lien sur le biniou:
banggood.com/custlink/KGKZKG6gAA
Visitez mon site: http://www.Cyrob.org
Sur Facebook: Cyrob.org
Discord : discord.gg/mNMSE53
Me contacter: info@cyrob.org
Rappel: Je ne vends rien et ne propose aucun service, même payant.
Supporter Cyrob.org :
http://philippe.demerliac.free.fr/Support.htm
00:00 Introduction
00:45 Déballage
02:15 Présentation statique
04:36 Démo
14:57 Conclusion
20:05 Karo-Lynn
Déontologie de la chaine:
http://philippe.demerliac.free.fr/Articles/Policy/Cyrob_Policy.htm
#Cyrob #banggood #mesures #electronique
Article, schéma, liens, etc... sur mon site:
http://philippe.demerliac.free.fr/MecaLab/MecaLab.htm
Visitez mon site: http://www.Cyrob.org
Sur Facebook: Cyrob.org
Discord : discord.gg/mNMSE53
Me contacter: info@cyrob.org
Rappel: Je ne vends rien et ne propose aucun service, même payant.
Supporter Cyrob.org :
http://philippe.demerliac.free.fr/Support.htm
00:00 Introduction
06:24 Les premières étapes
17:19 Conclusion
20:54 Karo-Lynn
Déontologie de la chaine:
http://philippe.demerliac.free.fr/Articles/Policy/Cyrob_Policy.htm
#Cyrob #MecaLab #bricolage
Article, schéma, liens, etc... sur mon site:
http://philippe.demerliac.free.fr/Articles/CP0152/CP0152.htm
Ma vidéo sur CP0150: youtu.be/u_GX4E1fIdA
Mes vidéos sur les Mosfet :
youtu.be/32mKatRVO3U?si=MlletN2i951euczY
youtu.be/RBYD3U_6adI?si=85dWNhGugBX5sE1E
youtu.be/k5uxvcYcIsU?si=jI_GN9ryirSUgosA
Visitez mon site: http://www.Cyrob.org
Sur Facebook: Cyrob.org
Discord : discord.gg/mNMSE53
Me contacter: info@cyrob.org
Rappel: Je ne vends rien et ne propose aucun service, même payant.
Supporter Cyrob.org :
http://philippe.demerliac.free.fr/Support.htm
00:00 Introduction
03:23 Démo
12:04 Schéma
19:08 Construction
21:48 Conclusion
25:26 Mo-Riss
Déontologie de la chaine:
http://philippe.demerliac.free.fr/Articles/Policy/Cyrob_Policy.htm
#Cyrob #schematics #mesures #electronique
(A cause le la caméra latérale floue, sinon c'est un bon produit)
Lien sur le biniou : banggood.com/custlink/KDmPfU0WE8
Lien sur le chargeur : banggood.com/custlink/3m3tMzcmhf
Visitez mon site: http://www.Cyrob.org
Sur Facebook: Cyrob.org
Discord : discord.gg/mNMSE53
Me contacter: info@cyrob.org
Rappel: Je ne vends rien et ne propose aucun service, même payant.
Supporter Cyrob.org :
http://philippe.demerliac.free.fr/Support.htm
00:00 Introduction
01:19 Déballage
03:02 Réglages
06:08 Démo
09:03 Caméra latérale
11:18 Visualisation sur PC
12:04 Conclusion
13:31 Nouveau micro
13:58 News MecaLab
14:43 Mo-Riss
Déontologie de la chaine:
http://philippe.demerliac.free.fr/Articles/Policy/Cyrob_Policy.htm
#Cyrob #endoscopy #banggood
Sur Facebook: Cyrob.org
Discord : discord.gg/mNMSE53
Me contacter: info@cyrob.org
Rappel: Je ne vends rien et ne propose aucun service, même payant.
Supporter Cyrob.org :
http://philippe.demerliac.free.fr/Support.htm
Déontologie de la chaine:
http://philippe.demerliac.free.fr/Articles/Policy/Cyrob_Policy.htm
#Cyrob #Live
Les 3 lots : https://s.click.aliexpress.com/e/_DDwYANZ
Lot d'Electrobreitz : https://www.ebay.fr/itm/201125671881
Ma vidéo sur ces lots : youtu.be/YQyLtyDhpGY?si=leeBBh-8HVZ_TRK8
Visitez mon site: http://www.Cyrob.org
Sur Facebook: Cyrob.org
Discord : discord.gg/mNMSE53
Me contacter: info@cyrob.org
Rappel: Je ne vends rien et ne propose aucun service, même payant.
Supporter Cyrob.org :
http://philippe.demerliac.free.fr/Support.htm
00:00 Introduction
06:10 Contenu des lots
30:38 Conclusion
32:56 Annonce "Live"
33:27 Mo-Riss
Déontologie de la chaine:
http://philippe.demerliac.free.fr/Articles/Policy/Cyrob_Policy.htm
#Cyrob #aliexpress #ebay
Lien sur le biniou : https://s.vevor.com/bfQZi1
Visitez mon site: http://www.Cyrob.org
Sur Facebook: Cyrob.org
Discord : discord.gg/mNMSE53
Me contacter: info@cyrob.org
Rappel: Je ne vends rien et ne propose aucun service, même payant.
Supporter Cyrob.org :
http://philippe.demerliac.free.fr/Support.htm
00:00 Introduction
03:34 Déballage
05:02 Présentation détaillée
09:55 Mise en route
13:15 Conclusion
14:45 Annonce "Live"
15:16 Mo-Riss
Déontologie de la chaine:
http://philippe.demerliac.free.fr/Articles/Policy/Cyrob_Policy.htm
#Cyrob #vevor #bricolage
Merci à Denis pour ses questions inspirantes.
Visitez mon site: http://www.Cyrob.org
Sur Facebook: Cyrob.org
Discord : discord.gg/mNMSE53
Me contacter: info@cyrob.org
Rappel: Je ne vends rien et ne propose aucun service, même payant.
Supporter Cyrob.org :
http://philippe.demerliac.free.fr/Support.htm
00:00 Introduction
02:02 Alimentation
11:20 Signaux logiques et analogiques
24:28 Matériel
35:54 Logiciel
38:38 Conclusion
43:58 Karo-Lynn
Déontologie de la chaine:
http://philippe.demerliac.free.fr/Articles/Policy/Cyrob_Policy.htm
#Cyrob #electronique #cyrob #arduino #simulation
Lien sur l'ampli présenté :
Ampli: https://s.click.aliexpress.com/e/_DlacqUh
Excellente page de Sonelec sur les puissances audios:
sonelec-musique.com/electronique_theorie_audio_puissances.html
Datasheet de l'ampli utilisé:
datasheetspdf.com/pdf-file/378720/NXP/TDA7057AQ/1
HP de test CP0072:
http://philippe.demerliac.free.fr/Articles/CP0072/CP0072.htm
Visitez mon site: http://www.Cyrob.org
Sur Facebook: Cyrob.org
Discord : discord.gg/mNMSE53
Me contacter: info@cyrob.org
Rappel: Je ne vends rien et ne propose aucun service, même payant.
Supporter Cyrob.org :
http://philippe.demerliac.free.fr/Support.htm
00:00 Introduction
02:34 Rappels théoriques
10:42 Ampli bridge
16:15 Mesure puissance
21:31 Mesure du bruit
22:19 Bande passante
25:55 Mesure impédance d'entrée
30:30 Les entrailles de la bête
32:00 Datasheet du TDA7057AQ
33:41 Conclusion
37:21 Mo-Riss
Déontologie de la chaine:
http://philippe.demerliac.free.fr/Articles/Policy/Cyrob_Policy.htm
#Cyrob #electronique #audio
Les QDN ne sont PAS des vidéos de placement de produits.
Je ne suis sponsorisé par personne et j’ai acheté tout ce que j’y présente comme n’importe quel client.
Je n’achète pas des produits pour les montrer dans des QDN, j’achète des produits pour mon propre usage et en montre certains afin de faire profiter d’autres Internautes de mes expériences d’achats.
Que vous les achetiez ou non m’indiffère totalement.
Je donne mon avis à un instant T, et ne saurais être tenu responsable d’éventuelles déconvenues que vous pourriez rencontrer avec ces produits qu’il vous faudra régler avec votre fournisseur.
Merci de votre compréhension.
Infos pour retrouver les produits présentés:
Je mets le lien de là où je l'ai trouvé, pas forcément le moins cher
Ces objets se trouvent souvent sur plusieurs sites, à vous de chercher et faire jouer la concurrence.
NOTE : Certains objets ne SONT plus dispos et donc non listés ici
ATTENTION : Certaines pages proposent des options, bien sélectionner avant d'acheter !
Ali-Express----------------------------------
Pince plate large : https://s.click.aliexpress.com/e/_DlFhgXT
Pince rond Grad: https://s.click.aliexpress.com/e/_Dkotnd3
Lame de scie: https://s.click.aliexpress.com/e/_DCllmZb
Pince SMD Kelvin: https://s.click.aliexpress.com/e/_DnqDsDF
Carte SD: https://s.click.aliexpress.com/e/_DmX577j
Connecteurs aimant: https://s.click.aliexpress.com/e/_DllyhXF
Banane Snap Secu: https://s.click.aliexpress.com/e/_DeSSbZB
Tournevis spéciaux: https://s.click.aliexpress.com/e/_DBVh4BB
Tournevis 2 points: https://s.click.aliexpress.com/e/_DdB5HYV
Voltmétre +-: https://s.click.aliexpress.com/e/_DnrTPkH
Kit Horloge: https://s.click.aliexpress.com/e/_DerLvfj
Pinces coupantes: https://s.click.aliexpress.com/e/_DE0Cy5F
Prise alim snap: https://s.click.aliexpress.com/e/_DlqXIp3
Support CI: https://s.click.aliexpress.com/e/_DllbYJF
Header: https://s.click.aliexpress.com/e/_DBekRqV
Ruban PTouch: https://s.click.aliexpress.com/e/_DmDCDJf
Ruban PTouch: https://s.click.aliexpress.com/e/_DkeusF7
Cuivre autocollant: https://s.click.aliexpress.com/e/_DlQMZm9
Equerre angle: https://s.click.aliexpress.com/e/_DetzkNr
Equerre: https://s.click.aliexpress.com/e/_DeBTOj7
Couvercle vis: https://s.click.aliexpress.com/e/_DlaGcJ3
Diode 20A10: https://s.click.aliexpress.com/e/_DEDPgHX
Lot Reg SMD: https://s.click.aliexpress.com/e/_DdArCJL
Colle A+B: https://s.click.aliexpress.com/e/_DkeeINB
Aimants 10x2: https://s.click.aliexpress.com/e/_DFy90UV
Résine AB: https://s.click.aliexpress.com/e/_DEGcQOv
Moule silicon : https://s.click.aliexpress.com/e/_DEpEI81
Silicone liquide: https://s.click.aliexpress.com/e/_Dnd6z3j
Forets Mini: https://s.click.aliexpress.com/e/_DCW2DJn
Diode Schottky: https://s.click.aliexpress.com/e/_DlXkBDL
Presse étoupes: https://s.click.aliexpress.com/e/_DCoL2G9
Clé mince : https://s.click.aliexpress.com/e/_DBFrENf
Clé 90° : https://s.click.aliexpress.com/e/_DDibpzf
Fils silicon: https://s.click.aliexpress.com/e/_DeYfpXT
Mors étau: https://s.click.aliexpress.com/e/_DkYGAVj
Mors alu biseau: https://s.click.aliexpress.com/e/_DBGNa2V
Mors orange: https://s.click.aliexpress.com/e/_Dm8xUrJ
Mors tube : https://s.click.aliexpress.com/e/_DdZnXmD
Ampli: https://s.click.aliexpress.com/e/_DlacqUh
Support moule ajustable : https://s.click.aliexpress.com/e/_DeeikSd
Condensateurs lot : https://s.click.aliexpress.com/e/_DeMQBgN
Visitez mon site: http://www.Cyrob.org
Sur Facebook: Cyrob.org
Discord : discord.gg/mNMSE53
Me contacter: info@cyrob.org
Rappel: Je ne vends rien et ne propose aucun service, même payant.
Supporter Cyrob.org :
http://philippe.demerliac.free.fr/Support.htm
00:00 Introduction
00:30 Présentation des achats
30:55 Conclusion
31:15 Karo-Lynn
Déontologie de la chaine:
http://philippe.demerliac.free.fr/Articles/Policy/Cyrob_Policy.htm
#Cyrob #qdn
Lien sur le biniou :
banggood.com/custlink/KGKtwFIDJe
Coupon de réduction : BGRA157
(348,65€ / 352.35€)
Le site constructeur :
http://launchdigital.net/product-view2.aspx?t=28&ContentId=44
Le logiciel : http://launchdigital.net/DownFiles.aspx?ContentId=90
Visitez mon site: http://www.Cyrob.org
Sur Facebook: Cyrob.org
Discord : discord.gg/mNMSE53
Me contacter: info@cyrob.org
Rappel: Je ne vends rien et ne propose aucun service, même payant.
Supporter Cyrob.org :
http://philippe.demerliac.free.fr/Support.htm
00:00 Introduction
01:00 Déballage
05:37 Présentation du logiciel
31:36 Démo
16:43 Cas pratiques
22:33 Spécifications
24:24 Conclusion
31:05 Mo-Riss
Déontologie de la chaine:
http://philippe.demerliac.free.fr/Articles/Policy/Cyrob_Policy.htm
#Cyrob #banggood #launchdigital
Un super big up à Pascal pour ce beau colis !
Si vous aussi vous voulez m'envoyer un colis pour participer, contactez moi à info@cyrob.org
Infos sur le 1731 : w140.com/tekwiki/wiki/1731
Visitez mon site: http://www.Cyrob.org
Sur Facebook: Cyrob.org
Discord : discord.gg/mNMSE53
Me contacter: info@cyrob.org
Rappel: Je ne vends rien et ne propose aucun service, même payant.
Supporter Cyrob.org :
http://philippe.demerliac.free.fr/Support.htm
00:00 Introduction
00:17 Tektronix 1731
01:42 Multimètre
02:18 Sonde de Rogowski
04:08 Composants
17:25 Conclusion
17:44 Mo-Riss
Déontologie de la chaine:
http://philippe.demerliac.free.fr/Articles/Policy/Cyrob_Policy.htm
#Cyrob #electronique #tektronix #fans
Elles sont par exemple très présentes dans les fameux Ordinateurs virtuel NoWhereShell spécialisés dans l'intelligence artificielle. En effet pour toutes fonctions, il y a des effets positifs et négatifs et donc l'intelligence artificiel engendre aussi de la connerie artificielle.
L'idée pour limiter les effets néfastes de la connerie générée est de l'inscrire dans des WOM, mémoire à écriture seule, ce qui nous protège très efficacement de celle-ci.
Le modèle Barracuda produit par NS (National Starfish) permet de stocker pour plus de 1000 ans prés de 01042024 pétabyte de données. La connerie se compactant assez mal, de tels volumes sont necessaires. Comme il est impossible de relire ce qui a été écrit pour s'assurer que c'est bien inscris, un algo nommé B.A.R (Barometric Analysis Ridiculous) permet en quantifiant le niveau de connerie potentiellement en erreur de générer des données anti-coquilles.
Mo-Riss pense aussi que chez certains humains semble-t-il prédisposés à la politique et donc générateur de conneries de haute intensité, greffer une WOM à la place de leur claque-merde serait d'utilité publique.
Visitez mon site: http://www.Cyrob.org
Sur Facebook: Cyrob.org
Discord : discord.gg/mNMSE53
Me contacter: info@cyrob.org
Rappel: Je ne vends rien et ne propose aucun service, même payant.
Supporter Cyrob.org :
http://philippe.demerliac.free.fr/Support.htm
00:00 Introduction
00:27 Hack du F.I.S.H
02:31 Ultimatum
Déontologie de la chaine:
http://philippe.demerliac.free.fr/Articles/Policy/Cyrob_Policy.htm
#Cyrob #1stapril #jokes #blague
Sur Facebook: Cyrob.org
Discord : discord.gg/mNMSE53
Me contacter: info@cyrob.org
Rappel: Je ne vends rien et ne propose aucun service, même payant.
Supporter Cyrob.org :
http://philippe.demerliac.free.fr/Support.htm
Déontologie de la chaine:
http://philippe.demerliac.free.fr/Articles/Policy/Cyrob_Policy.htm
#Cyrob #Live
ERRATA
Certains Internautes m’ont fait remarquer avec raison que dans mes mesures, le néon de CP0145 était pris en compte. C’est en effet une grossière erreur de ma part. J’ai refait les mesures sans et la consommation descend à 0.8mA. Cela ne change rien au principe présenté mais montre que qu’avec de tels courants des couplages capacitifs rendent potentiellement plus probables le fait que cela pourrait venir d'une capacité parasite entre les fils présents dans les gaines. Je ne connais pas exactement la capacité entre les fils mais il me semble qu’il faudrait quand même une grande longueur ou que les fils soient très fortement serrés entre eux pour que cela advienne. C’est donc une cause de plus, même si, au vu des commentaires, c’est plus des inversions phase-neutre et les fuites à la terre même faibles qui sont les causes les plus fréquentes.
Visitez mon site: http://www.Cyrob.org
Sur Facebook: Cyrob.org
Discord : discord.gg/mNMSE53
Me contacter: info@cyrob.org
Rappel: Je ne vends rien et ne propose aucun service, même payant.
Supporter Cyrob.org :
http://philippe.demerliac.free.fr/Support.htm
00:00 Introduction
00:40 Le problème
02:44 Causes
08:15 Solutions
12:19 Conclusion
14:42 Annonce "Live"
14:54 Mo-Riss
Déontologie de la chaine:
http://philippe.demerliac.free.fr/Articles/Policy/Cyrob_Policy.htm
#Cyrob #electronique #ledlights
Note : Il y a bien une musique de fin sur cette vidéo.
C'est "An ode to silent flatulence" par Mo-Riss et Pin-7
Norme ESD : comptoir.bricozor.com/la-norme-esd-cest-quoi-exactement.html
Quelques produits de protection ESD:
https://s.click.aliexpress.com/e/_DlYLwBj
https://s.click.aliexpress.com/e/_DeqgPG1
https://s.click.aliexpress.com/e/_DFU16gH
https://s.click.aliexpress.com/e/_DFxxJkv
Visitez mon site: http://www.Cyrob.org
Sur Facebook: Cyrob.org
Discord : discord.gg/mNMSE53
Me contacter: info@cyrob.org
Rappel: Je ne vends rien et ne propose aucun service, même payant.
Supporter Cyrob.org :
http://philippe.demerliac.free.fr/Support.htm
00:00 Introduction
00:52 Rappel physique
02:56 Le risque
04:51 Précautions de base
10:04 Bracelet
13:47 Tapis
14:44 Autres dispositifs
17:08 Conclusion
20:31 Annonce "Live"
20:41 Mo-Riss
Déontologie de la chaine:
http://philippe.demerliac.free.fr/Articles/Policy/Cyrob_Policy.htm
#Cyrob #electronique #ESD
Lien sur le biniou : https://s.vevor.com/bfQUE7
Le code de réduction : VV2324
Lame de rechange (longueur 1140mm)
https://s.click.aliexpress.com/e/_DkGNnln
Visitez mon site: http://www.Cyrob.org
Sur Facebook: Cyrob.org
Discord : discord.gg/mNMSE53
Me contacter: info@cyrob.org
Rappel: Je ne vends rien et ne propose aucun service, même payant.
Supporter Cyrob.org :
http://philippe.demerliac.free.fr/Support.htm
00:00 Introduction
00:51 Déballage
01:51 Examen
04:23 Installation lame
06:46 Démo coupes
13:37 Conclusion
15:15 Mo-Riss
Déontologie de la chaine:
http://philippe.demerliac.free.fr/Articles/Policy/Cyrob_Policy.htm
#Cyrob #vevor #bricolage #usinage
Visitez mon site: http://www.Cyrob.org
Sur Facebook: Cyrob.org
Discord : discord.gg/mNMSE53
Me contacter: info@cyrob.org
Rappel: Je ne vends rien et ne propose aucun service, même payant.
Supporter Cyrob.org :
http://philippe.demerliac.free.fr/Support.htm
00:00 Introduction
02:44 Courant constant
05:43 Résistance constante
08:04 Puissance constante
09:44 Tension constante
13:57 Conclusion
14:29 Mo-Riss
Déontologie de la chaine:
http://philippe.demerliac.free.fr/Articles/Policy/Cyrob_Policy.htm
#Cyrob #Siglent #electronique
Lien sur le biniou : banggood.com/custlink/3m3tMzcmhf
Visitez mon site: http://www.Cyrob.org
Sur Facebook: Cyrob.org
Discord : discord.gg/mNMSE53
Me contacter: info@cyrob.org
Rappel: Je ne vends rien et ne propose aucun service, même payant.
Supporter Cyrob.org :
http://philippe.demerliac.free.fr/Support.htm
00:00 Introduction
01:14 Déballage
03:48 Démo
07:06 Charge sans fil
09:23 Mesure consommation
12:51 Conclusion
13:32 Mo-Riss
Déontologie de la chaine:
http://philippe.demerliac.free.fr/Articles/Policy/Cyrob_Policy.htm
#Cyrob #banggood #usb
Article, schéma, liens, etc... sur mon site:
http://philippe.demerliac.free.fr/Articles/CP0150/CP0150.htm
Liens sur certains matériels utilisés:
Module voltmètres bipolaire: https://s.click.aliexpress.com/e/_DC5P1ot
Convertisseur: https://s.click.aliexpress.com/e/_DEui9f3
Fils silicone: https://s.click.aliexpress.com/e/_DCvGKKN
Visitez mon site: http://www.Cyrob.org
Sur Facebook: Cyrob.org
Discord : discord.gg/mNMSE53
Me contacter: info@cyrob.org
Rappel: Je ne vends rien et ne propose aucun service, même payant.
Supporter Cyrob.org :
http://philippe.demerliac.free.fr/Support.htm
00:00 Introduction
03:28 Démo
04:54 Version alim standard
08:28 Version alim flyback
19:23 Calculs
25:19 Construction
38:41 Conclusion
39:21 Mo-Riss
Déontologie de la chaine:
http://philippe.demerliac.free.fr/Articles/Policy/Cyrob_Policy.htm
#Cyrob #schematics #voltmeter
Rappel :
Les QDN ne sont PAS des vidéos de placement de produits.
Je ne suis sponsorisé par personne et j’ai acheté tout ce que j’y présente comme n’importe quel client.
Je n’achète pas des produits pour les montrer dans des QDN, j’achète des produits pour mon propre usage et en montre certains afin de faire profiter d’autres Internautes de mes expériences d’achats.
Que vous les achetiez ou non m’indiffère totalement.
Je donne mon avis à un instant T, et ne saurais être tenu responsable d’éventuelles déconvenues que vous pourriez rencontrer avec ces produits qu’il vous faudra régler avec votre fournisseur.
Merci de votre compréhension.
Infos pour retrouver les produits présentés:
Je mets aussi le lien de là où je l'ai trouvé, pas forcément le moins cher
Ces objets se trouvent souvent sur plusieurs sites, à vous de chercher et faire jouer la concurrence.
NOTE : Certains objets ne SONT plus dispos et donc non listés ici
ATTENTION : Certaines pages proposent des options, bien sélectionner avant d'acheter !
Site LIDL: https://www.lidl.fr/p/parkside-set-de-pinces-a-sertir-2012-pieces/p100367458
Liens en rapport :
Kit de fils silicone : https://s.click.aliexpress.com/e/_DCvGKKN
Connecteurs Dupont rechange : https://s.click.aliexpress.com/e/_Dm9AlDR
Header droit : https://s.click.aliexpress.com/e/_DkfYi5j
Header coudé : https://s.click.aliexpress.com/e/_DkzFzOp
Dupont double : https://s.click.aliexpress.com/e/_DDEQ3b7
Header double droit : https://s.click.aliexpress.com/e/_DdG4aDF
Header double coudés : https://s.click.aliexpress.com/e/_DCfdpo5
Connecteur XH de rechange : https://s.click.aliexpress.com/e/_DFRmKt7
Modèle SMD : https://s.click.aliexpress.com/e/_DepYAz3
Autres pas : https://s.click.aliexpress.com/e/_DmtXRJL
Visitez mon site: http://www.Cyrob.org
Sur Facebook: Cyrob.org
Discord : discord.gg/mNMSE53
Me contacter: info@cyrob.org
Rappel: Je ne vends rien et ne propose aucun service, même payant.
00:00 Introduction
01:37 Déballage
05:43 Test Dupont
10:20 Test XH blancs
13:16 Site LIDL
13:45 Conclusion
18:16 Mo-Riss
Supporter Cyrob.org :
http://philippe.demerliac.free.fr/Support.htm
Déontologie de la chaine:
http://philippe.demerliac.free.fr/Articles/Policy/Cyrob_Policy.htm
#Cyrob #electronique #lidl #parkside
Merci à Jean pour ce schéma.
Vous pouvez m'envoyer des schémas pour analyse.
Ils doivent répondre aux critères suivants:
- Tenir sur une image unique - de 1Mb (Jpeg, Bmp, Gif) (Pdf d’une page)
- Être lisible
- Pas trop complexe pour que l’explication reste simple (Une sous partie d’un schéma complexe est acceptée)
- La fonction du schéma peut être indiquée ou non ce qui permet d’essayer de la deviner pour le fun….
- Sauf indication contraire, je citerai le prénom de l’envoyeur
- N’envoyez que des schémas « Public » ou dont vous êtes sûr d’avoir les droits.
En cas de litige, je donnerai votre mail comme source.
- Envoyez exclusivement à info@cyrob.org
Visitez mon site: http://www.Cyrob.org
Sur Facebook: Cyrob.org
Discord : discord.gg/mNMSE53
Me contacter: info@cyrob.org
Rappel: Je ne vends rien et ne propose aucun service, même payant.
Supporter Cyrob.org :
http://philippe.demerliac.free.fr/Support.htm
00:00 Introduction
00:44 Effet antenne
04:57 Effet résistif
07:40 Effet capacitif
11:10 Conclusion
12:43 Karo-Lynn
Déontologie de la chaine:
http://philippe.demerliac.free.fr/Articles/Policy/Cyrob_Policy.htm
#Cyrob #electronique #schematics
Visitez mon site: http://www.Cyrob.org
Sur Facebook: Cyrob.org
Discord : discord.gg/mNMSE53
Me contacter: info@cyrob.org
Rappel: Je ne vends rien et ne propose aucun service, même payant.
Supporter Cyrob.org :
http://philippe.demerliac.free.fr/Support.htm
00:00 Introduction
00:20 Rappel
01:16 Entrée bipolaire
03:57 Sortie bipolaire
07:25 Conclusion
07:41 Karo-Lynn
Déontologie de la chaine:
http://philippe.demerliac.free.fr/Articles/Policy/Cyrob_Policy.htm
#Cyrob #electronique #optocoupler
Sur Facebook: Cyrob.org
Discord : discord.gg/mNMSE53
Me contacter: info@cyrob.org
Rappel: Je ne vends rien et ne propose aucun service, même payant.
Supporter Cyrob.org :
http://philippe.demerliac.free.fr/Support.htm
Déontologie de la chaine:
http://philippe.demerliac.free.fr/Articles/Policy/Cyrob_Policy.htm
#Cyrob #live
Lien sur le biniou : https://s.vevor.com/bfQTeF
Coupon de réduction : VV2324
NOTE : dans bien des cas, le processus va "écrouir" le métal et le durcir. Il est parfois necessaire de le réchauffer pour le rendre à nouveau plus malléable.
Voir apprendre-la-bijouterie.com/ecrouir-et-recuire
Visitez mon site: http://www.Cyrob.org
Sur Facebook: Cyrob.org
Discord : discord.gg/mNMSE53
Me contacter: info@cyrob.org
Rappel: Je ne vends rien et ne propose aucun service, même payant.
Supporter Cyrob.org :
http://philippe.demerliac.free.fr/Support.htm
00:00 Introduction
01:00 Déballage
01:56 Présentation
10:24 Conclusion
12:28 Annonce "Live"
12:44 Mo-Riss
Déontologie de la chaine:
http://philippe.demerliac.free.fr/Articles/Policy/Cyrob_Policy.htm
#Cyrob #vevor #usinage
La vignette a été en partie générée par l'IA Copilot
Mea Culpa : Je m'apperçois avec horreur que j'ai oublié de mentionner les B.A (Business Analyst) qui ont aussi un rôle très important d'analyse des besoins métiers afin de guider les développeurs.
De plus, je me suis limité ici aux sites et applications pour les clients finaux, il y a aussi bien sûr tous les rôles techniques chez les fournisseurs d'infrastructure sans qui ces applications ne pourraient fonctionner.
Ndlr : Le son était vraiment trop faible, j'ai réussi à réencoder la vidéo en augmentant le volume, ça a ajouté un peu de bruit mais cela me semble quand même mieux.
Visitez mon site: http://www.Cyrob.org
Sur Facebook: Cyrob.org
Discord : discord.gg/mNMSE53
Me contacter: info@cyrob.org
Rappel: Je ne vends rien et ne propose aucun service, même payant.
Supporter Cyrob.org :
http://philippe.demerliac.free.fr/Support.htm
00:00 Introduction
01:28 Avertissement
03:48 Product manager
05:39 Architect
10:45 Security
11:51 Legal
15:18 Dev et lead dev
15:41 Product owner
18:10 UX
20:08 DevOps
23:37 QA
27:37 Marketing
28:30 DataScientist
29:06 PenTest
29:58 Customer Service
32:29 Autres tâches de l'architecte
38:05 Devenir architecte logiciel
49:09 Qui paye ?
53:00 Conclusion
53:30 Annonce "Live"
53:52 Karo-Lynn
Déontologie de la chaine:
http://philippe.demerliac.free.fr/Articles/Policy/Cyrob_Policy.htm
#Cyrob #software #devops
Liens :
http://reolink.com/lp/16mp-security-camera/?aff=41
reolink.com/product/rln12w/?aff=41
reolink.com/fr/product/reolink-duo-3-poe/?aff=41
Produits Reolink : store.reolink.com/fr/?aff=41
Généralité sur les caméras de vidéo-surveillance :
youtu.be/JEehOSy9kyI?si=kMPNt53licYonZCW
Visitez mon site: http://www.Cyrob.org
Sur Facebook: Cyrob.org
Discord : discord.gg/mNMSE53
Me contacter: info@cyrob.org
Rappel: Je ne vends rien et ne propose aucun service, même payant.
Supporter Cyrob.org :
http://philippe.demerliac.free.fr/Support.htm
00:00 Introduction
02:44 Déballage NVR
06:41 Déballage Dual Cam 3
11:34 Connection NVR
18:46 Connection LAN optionnelle
22:40 Conclusion
24:01 Pin-7
Déontologie de la chaine:
http://philippe.demerliac.free.fr/Articles/Policy/Cyrob_Policy.htm
#Cyrob #reolink #Reolink16MP #ReolinkDuo3 #vidéosurveillance
Les QDN ne sont PAS des vidéos de placement de produits.
Je ne suis sponsorisé par personne et j’ai acheté tout ce que j’y présente comme n’importe quel client.
Je n’achète pas des produits pour les montrer dans des QDN, j’achète des produits pour mon propre usage et en montre certains afin de faire profiter d’autres Internautes de mes expériences d’achats.
Que vous les achetiez ou non m’indiffère totalement.
Je donne mon avis à un instant T, et ne saurais être tenu responsable d’éventuelles déconvenues que vous pourriez rencontrer avec ces produits qu’il vous faudra régler avec votre fournisseur.
Merci de votre compréhension.
Infos pour retrouver les produits présentés:
Je mets aussi le lien de là où je l'ai trouvé, pas forcément le moins cher
Ces objets se trouvent souvent sur plusieurs sites, à vous de chercher et faire jouer la concurrence.
NOTE : Certains objets ne SONT plus dispos et donc non listés ici
ATTENTION : Certaines pages proposent des options, bien sélectionner avant d'acheter !
BMJ----------------------------------
bmjelec.com/produit/support-multifonction
RS ---------------------------------
Dénudeurs
fr.rs-online.com/web/p/pinces-a-denuder/2174412
fr.rs-online.com/web/p/pinces-a-denuder/1619560
fr.rs-online.com/web/p/pinces-a-denuder/1201945
fr.rs-online.com/web/p/pinces-a-denuder/1201973
fr.rs-online.com/web/p/pinces-a-denuder/2755285
fr.rs-online.com/web/p/pinces-a-denuder/1201967
Amazon ----------------------------------------
Pince em mainFormage: https://www.amazon.fr/gp/product/B00VX74O38
Ali-Express----------------------------------
Tiroirs de table : https://s.click.aliexpress.com/e/_DlEeFOz
Scalpel : https://s.click.aliexpress.com/e/_DF8mIbx
Cure dent titane : https://s.click.aliexpress.com/e/_DCIRoI1
Brucelles Ceramic : https://s.click.aliexpress.com/e/_DliTAXF
Brucelles Acier : https://s.click.aliexpress.com/e/_Dezojt3
Pince hémostatiques : https://s.click.aliexpress.com/e/_DEwFgXb
Pinces coupantes : https://s.click.aliexpress.com/e/_DlduIOh
Pince plate : https://s.click.aliexpress.com/e/_DBpSCAv
Forets miniatures : https://s.click.aliexpress.com/e/_Dcj6BjX
Porte-foret : https://s.click.aliexpress.com/e/_DdKXPsD
Feutres doubles : https://s.click.aliexpress.com/e/_DEXG7D3
Feutres blancs : https://s.click.aliexpress.com/e/_DchMdaN
Feutres pointes longues : https://s.click.aliexpress.com/e/_DCbonMZ
Clé plate : https://s.click.aliexpress.com/e/_DBwm24l
BanGGood-----------------------------------
Cure dent titane : banggood.com/custlink/v3Dy4dyg6h
Redresseur pattes CI
restorpinball.com/boutique/4395/62/outillage/redresseur-de-pattes-de-circuit-int%C3%A9gr%C3%A9s-detail
Visitez mon site: http://www.Cyrob.org
Sur Facebook: Cyrob.org
Discord : discord.gg/mNMSE53
Me contacter: info@cyrob.org
Rappel: Je ne vends rien et ne propose aucun service, même payant.
Supporter Cyrob.org :
http://philippe.demerliac.free.fr/Support.htm
00:00 Introduction
00:27 Tiroirs
02:28 Support BMJ
03:06 Outils divers
11:17 Conclusion
12:20 Mo-Riss
Déontologie de la chaine:
http://philippe.demerliac.free.fr/Articles/Policy/Cyrob_Policy.htm
#Cyrob #QDN
Un commutateur de central en action:
youtu.be/nnCSIEgguLM?si=UXWr1qINDW7oDUQe&t=64
Liens pour approfondir le sujet:
fr.wikipedia.org/wiki/Code_DTMF
fr.wikipedia.org/wiki/Ligne_t%C3%A9l%C3%A9phonique
fr.wikipedia.org/wiki/R%C3%A9seau_t%C3%A9l%C3%A9phonique_commut%C3%A9
fr.wikipedia.org/wiki/Commutateur_t%C3%A9l%C3%A9phonique
Vous pouvez m'envoyer des schémas pour analyse.
Ils doivent répondre aux critères suivants:
- Tenir sur une image unique - de 1Mb (Jpeg, Bmp, Gif) (Pdf d’une page)
- Être lisible
- Pas trop complexe pour que l’explication reste simple (Une sous partie d’un schéma complexe est acceptée)
- La fonction du schéma peut être indiquée ou non ce qui permet d’essayer de la deviner pour le fun….
- Sauf indication contraire, je citerai le prénom de l’envoyeur
- N’envoyez que des schémas « Public » ou dont vous êtes sûr d’avoir les droits.
En cas de litige, je donnerai votre mail comme source.
- Envoyez exclusivement à info@cyrob.org
Visitez mon site: http://www.Cyrob.org
Sur Facebook: Cyrob.org
Discord : discord.gg/mNMSE53
Me contacter: info@cyrob.org
Rappel: Je ne vends rien et ne propose aucun service, même payant.
00:00 Introduction
00:48 Fonctionnement téléphone
10:40 Logique PABX
14:38 Analogique PABX
23:18 Conclusion
26:01 Karo-Lynn
Supporter Cyrob.org :
http://philippe.demerliac.free.fr/Support.htm
Déontologie de la chaine:
http://philippe.demerliac.free.fr/Articles/Policy/Cyrob_Policy.htm
#Cyrob #telephone #electronique #schematics
Super rapport qualité prix
Lien sur le biniou :
banggood.com/custlink/GKGtkRNcWE
Visitez mon site: http://www.Cyrob.org
Sur Facebook: Cyrob.org
Discord : discord.gg/mNMSE53
Me contacter: info@cyrob.org
Rappel: Je ne vends rien et ne propose aucun service, même payant.
Supporter Cyrob.org :
http://philippe.demerliac.free.fr/Support.htm
00:00 Introduction
01:59 Déballage
05:05 Réglages
08:04 Multimètre
11:51 Caméra IR
16:05 Photos
17:08 Conclusion
20:01 Mo-Riss
Déontologie de la chaine:
http://philippe.demerliac.free.fr/Articles/Policy/Cyrob_Policy.htm
#Cyrob #banggood #mustool
Quelques liens :
fr.wikipedia.org/wiki/Sortie_%C3%A0_trois_%C3%A9tats
fr.wikipedia.org/wiki/Bus_informatique
fr.wikipedia.org/wiki/Tampon_trois_%C3%A9tats
Visitez mon site: http://www.Cyrob.org
Sur Facebook: Cyrob.org
Discord : discord.gg/mNMSE53
Me contacter: info@cyrob.org
Rappel: Je ne vends rien et ne propose aucun service, même payant.
Supporter Cyrob.org :
http://philippe.demerliac.free.fr/Support.htm
00:00 Introduction
00:42 Rappels de base
02:54 Le principe
07:13 Points principaux
9:58 Applications
13:22 Exemples bus Z80
16:43 Circuits de légende
20:47 Micro-contrôleurs
22:01 Conclusion
22:56 Karo-Lynn
Déontologie de la chaine:
http://philippe.demerliac.free.fr/Articles/Policy/Cyrob_Policy.htm
#Cyrob #electronique
Lien sur le biniou : https://s.vevor.com/bfQQjS
Le code de réduction est VV2324
La manuel :
https://manuals.plus/vevor/bs-0-precision-dividing-head-dividing-head-manual
Excellente vidéo en français qui explique le calcul et l'utilisation des plaques :
youtu.be/EFVvRACg_JY?si=psslkkOTIUuOhegv
Quelques vidéos en anglais :
Taille d'engrenages
youtu.be/rtgESIVpUPo?si=MeNPa2Io2y0d5chH
Démontage intégral :
youtu.be/4pZxH3NuLHY?si=2Nu8b-HKeZhc7Hcm
Autre présentation :
youtu.be/XRZjGo_oU5c?si=8KL5nHbvOCxQsQuB
Visitez mon site: http://www.Cyrob.org
Sur Facebook: Cyrob.org
Discord : discord.gg/mNMSE53
Me contacter: info@cyrob.org
Rappel: Je ne vends rien et ne propose aucun service, même payant.
00:00 Introduction
01:58 Déballage
17:58 Démo
21:45 Conclusion
24:27 Mo-Riss
Supporter Cyrob.org :
http://philippe.demerliac.free.fr/Support.htm
Déontologie de la chaine:
http://philippe.demerliac.free.fr/Articles/Policy/Cyrob_Policy.htm
#Cyrob #vevor #usinage #fraisage
Calculateur ondulation : https://www.changpuak.ch/electronics/power_supply_design.php
Sonelec : sonelec-musique.com/electronique_bases_alimentations.html
Data Sheet capa : docs.rs-online.com/d471/A700000009522808.pdf
Visitez mon site: http://www.Cyrob.org
Sur Facebook: Cyrob.org
Discord : discord.gg/mNMSE53
Me contacter: info@cyrob.org
Rappel: Je ne vends rien et ne propose aucun service, même payant.
Supporter Cyrob.org :
http://philippe.demerliac.free.fr/Support.htm
00:00 Introduction
00:59 Rappel ondulation
03:48 Utilisation avec régulateur
06:48 Démo
09:24 Inconvénients
14:51 Calcul de la capacité
18:42 Conclusion
20:46 Karo-Lyne
Déontologie de la chaine:
http://philippe.demerliac.free.fr/Articles/Policy/Cyrob_Policy.htm
#Cyrob #electronique #schematics
Super écran mais emballage un peu léger.
Lien sur le biniou : banggood.com/custlink/vDDFbqeqPc
(Prendre plutôt le modèle IPS)
Visitez mon site: http://www.Cyrob.org
Sur Facebook: Cyrob.org
Discord : discord.gg/mNMSE53
Me contacter: info@cyrob.org
Rappel: Je ne vends rien et ne propose aucun service, même payant.
Supporter Cyrob.org :
http://philippe.demerliac.free.fr/Support.htm
00:00 Introduction
00:55 Déballage
03:37 Démo
05:13 Conclusion
06:42 Oups!
Déontologie de la chaine:
http://philippe.demerliac.free.fr/Articles/Policy/Cyrob_Policy.htm
#Cyrob #rasberry #banggood
Sur Facebook: Cyrob.org
Discord : discord.gg/mNMSE53
Me contacter: info@cyrob.org
Rappel: Je ne vends rien et ne propose aucun service, même payant.
Supporter Cyrob.org :
http://philippe.demerliac.free.fr/Support.htm
Déontologie de la chaine:
http://philippe.demerliac.free.fr/Articles/Policy/Cyrob_Policy.htm
#Cyrob #Live
Merci à Maurice pour ce schéma.
Liens pour approfondir le sujet:
fr.wikipedia.org/wiki/Bootstrap_(%C3%A9lectronique)
http://res-nlp.univ-lemans.fr/NLP_C_M15_G02/co/Contenu_12.html
https://philipperoux.nexgate.ch/Resources/EC_boot1.pdf
ti.com/lit/gpn/cd4017b
ti.com/lit/gpn/cd40106b
Vous pouvez m'envoyer des schémas pour analyse.
Ils doivent répondre aux critères suivants:
- Tenir sur une image unique - de 1Mb (Jpeg, Bmp, Gif) (Pdf d’une page)
- Être lisible
- Pas trop complexe pour que l’explication reste simple (Une sous partie d’un schéma complexe est acceptée)
- La fonction du schéma peut être indiquée ou non ce qui permet d’essayer de la deviner pour le fun….
- Sauf indication contraire, je citerai le prénom de l’envoyeur
- N’envoyez que des schémas « Public » ou dont vous êtes sûr d’avoir les droits.
En cas de litige, je donnerai votre mail comme source.
- Envoyez exclusivement à info@cyrob.org
Visitez mon site: http://www.Cyrob.org
Sur Facebook: Cyrob.org
Discord : discord.gg/mNMSE53
Me contacter: info@cyrob.org
Rappel: Je ne vends rien et ne propose aucun service, même payant.
Supporter Cyrob.org :
http://philippe.demerliac.free.fr/Support.htm
00:00 Introduction
01:27 Analyse détaillée
11:27 Conclusion
12:56 Annonce "Live"
13:16 Karo-Lyne
Déontologie de la chaine:
http://philippe.demerliac.free.fr/Articles/Policy/Cyrob_Policy.htm
#Cyrob #electronique #schematics
ATTENTION : Si vous choisissez la version à souder vous même, il vous faut un minimum d'équipements, fers de qualité à pointe fine, brasure de qualité et microscope ad minima ( et de la patience et du self contrôle, si vous tremblez, c'est mort :) )
Lien sur le kit (PCB à souder) : banggood.com/custlink/vv3VnsWRCc
Lien sur le kit (PPCB monté) : banggood.com/custlink/DD3PAncyr8
Doc de montage : http://myosuploads3.banggood.com/products/20210624/20210624024140ThickfontanalogglowtubeLEDmusicspectrumdisplayDIYclockds3231productionkitEnglishweldinginstructions.pdf
Visitez mon site: http://www.Cyrob.org
Sur Facebook: Cyrob.org
Discord : discord.gg/mNMSE53
Me contacter: info@cyrob.org
Rappel: Je ne vends rien et ne propose aucun service, même payant.
Supporter Cyrob.org :
http://philippe.demerliac.free.fr/Support.htm
00:00 Introduction
01:05 Déballage
04:04 Montage PCB
13:28 Test PCB
14:25 Montage boitier
16:52 Présentation finale
19:52 Conclusion
22:17 Annonce "Live"
22:46 Mo-Riss
Déontologie de la chaine:
http://philippe.demerliac.free.fr/Articles/Policy/Cyrob_Policy.htm
#Cyrob #banggood #geekcreit
Merci à Alain pour ce schéma.
Vous pouvez m'envoyer des schémas pour analyse.
Ils doivent répondre aux critères suivants:
- Tenir sur une image unique - de 1Mb (Jpeg, Bmp, Gif) (Pdf d’une page)
- Être lisible
- Pas trop complexe pour que l’explication reste simple (Une sous partie d’un schéma complexe est acceptée)
- La fonction du schéma peut être indiquée ou non ce qui permet d’essayer de la deviner pour le fun….
- Sauf indication contraire, je citerai le prénom de l’envoyeur
- N’envoyez que des schémas « Public » ou dont vous êtes sûr d’avoir les droits.
En cas de litige, je donnerai votre mail comme source.
- Envoyez exclusivement à info@cyrob.org
Visitez mon site: http://www.Cyrob.org
Sur Facebook: Cyrob.org
Discord : discord.gg/mNMSE53
Me contacter: info@cyrob.org
Rappel: Je ne vends rien et ne propose aucun service, même payant.
Supporter Cyrob.org :
http://philippe.demerliac.free.fr/Support.htm
00:00 Introduction
01:46 Analyse détaillée
08:28 Conclusion
08:34 Karo-Line
Déontologie de la chaine:
http://philippe.demerliac.free.fr/Articles/Policy/Cyrob_Policy.htm
#Cyrob #electronique #schematics
Lien sur le biniou : https://s.vevor.com/bfQN3M
Visitez mon site: http://www.Cyrob.org
Sur Facebook: Cyrob.org
Discord : discord.gg/mNMSE53
Me contacter: info@cyrob.org
Rappel: Je ne vends rien et ne propose aucun service, même payant.
Supporter Cyrob.org :
http://philippe.demerliac.free.fr/Support.htm
00:00 Introduction
01:00 Déballage
04:02 Test
06:08 Mesure parasites
07:45 Conclusion
08:54 Mo-Riss
Déontologie de la chaine:
http://philippe.demerliac.free.fr/Articles/Policy/Cyrob_Policy.htm
#Cyrob #vevor #bricolage
1. Remove all time-related displays on the instrument
2. To modify the vertical interface, click the wiring diagram to modify the AC coupling function
3. Modify the delayed scan Chinese display as Zoom
4. Modify the order of the menu in the upper right corner, put the measurement in the front and Default in the back
5. The probe ratio interface is removed, and the probe ratio option is added to the vertical first-level menu
Téléchargeable ici: download.rigol.com/en/firmware/DHO800_DHO900(Software)UpdateV00.01.01.zip
Bras support :
https://s.click.aliexpress.com/e/_Dmfe7Gt
https://s.click.aliexpress.com/e/_Denm70h
Visitez mon site: http://www.Cyrob.org
Sur Facebook: Cyrob.org
Discord : discord.gg/mNMSE53
Me contacter: info@cyrob.org
Rappel: Je ne vends rien et ne propose aucun service, même payant.
Supporter Cyrob.org :
http://philippe.demerliac.free.fr/Support.htm
00:00 Introduction
00:41 Fil de terre intégré
01:38 Support CP0149
03:42 Mode Ultra-Acquire
07:38 Conclusion
07:58 Pin-7
Déontologie de la chaine:
http://philippe.demerliac.free.fr/Articles/Policy/Cyrob_Policy.htm
#Cyrob #rigol #oscilloscope
Lien sur le biniou: banggood.com/custlink/D3D5nRC3t7
Coupon: Code: BG5a2832
Autres vidéos sur le biniou (en Anglais):
youtu.be/9-EHjiijSA0?si=yMvMBev3mLFsstuc
youtu.be/HR6_Lp7fH_c?si=jro8MqgaR-aLbqxc
youtu.be/XoOh0gypVII?si=nSUC9QWISPqNt1wp
Visitez mon site: http://www.Cyrob.org
Sur Facebook: Cyrob.org
Discord : discord.gg/mNMSE53
Me contacter: info@cyrob.org
Rappel: Je ne vends rien et ne propose aucun service, même payant.
Supporter Cyrob.org :
http://philippe.demerliac.free.fr/Support.htm
00:00 Introduction
01:37 Déballage
03:16 Examen statique
05:26 Mesure secteur impossible
09:34 Mise en route
09:43 MAJ Firmware
11:08 Sondes et compensation
15:52 Géné intégré
16:41 Curseurs
18:33 Bande passante
24:12 Sensibilité X1
26:31 mode XY
27:11 Déclenchement One-Shoot
28:15 FFT
29:11 Color Temp
29:42 Appréciation globale
34:50 Conclusion
35:54 Karo-Line
Déontologie de la chaine:
http://philippe.demerliac.free.fr/Articles/Policy/Cyrob_Policy.htm
#Cyrob #FINIRSI #banggood #DPOX180H
Sur Facebook: Cyrob.org
Discord : discord.gg/mNMSE53
Me contacter: info@cyrob.org
Rappel: Je ne vends rien et ne propose aucun service, même payant.
Supporter Cyrob.org :
http://philippe.demerliac.free.fr/Support.htm
00:00 Introduction
02:36 Usinage
06:48 Tests
07:28 Conclusion
08:07 Mo-Riss
Déontologie de la chaine:
http://philippe.demerliac.free.fr/Articles/Policy/Cyrob_Policy.htm
#Cyrob #usinage
Sur Facebook: Cyrob.org
Discord : discord.gg/mNMSE53
Me contacter: info@cyrob.org
Rappel: Je ne vends rien et ne propose aucun service, même payant.
Supporter Cyrob.org :
http://philippe.demerliac.free.fr/Support.htm
Déontologie de la chaine:
http://philippe.demerliac.free.fr/Articles/Policy/Cyrob_Policy.htm
#Cyrob #vœux #2024
Bonnes fêtes de fin d'année à toutes et tous !
Visitez mon site: http://www.Cyrob.org
Sur Facebook: Cyrob.org
Discord : discord.gg/mNMSE53
Me contacter: info@cyrob.org
Rappel: Je ne vends rien et ne propose aucun service, même payant.
Supporter Cyrob.org :
http://philippe.demerliac.free.fr/Support.htm
00:00 Introduction
01:53 Recherche panne
04:09 Réparation
04:58 Test
05:53 Finalisation
07:18 Conclusion
08:53 Mo-Riss
Déontologie de la chaine:
http://philippe.demerliac.free.fr/Articles/Policy/Cyrob_Policy.htm
#Cyrob #reparations #electronique
Visitez mon site: http://www.Cyrob.org
Sur Facebook: Cyrob.org
Discord : discord.gg/mNMSE53
Me contacter: info@cyrob.org
Rappel: Je ne vends rien et ne propose aucun service, même payant.
Supporter Cyrob.org :
http://philippe.demerliac.free.fr/Support.htm
Déontologie de la chaine:
http://philippe.demerliac.free.fr/Articles/Policy/Cyrob_Policy.htm
#Cyrob #live
Lien sur le biniou: https://s.vevor.com/bfQLA0
Code réduction de 5%: VV2324
Liens sur les consommables associés :
Feuilles Vinyl : https://s.click.aliexpress.com/e/_DFF4nkV
Rouleaux Vinyl : https://s.click.aliexpress.com/e/_Dma8Bbb
Transfert : https://s.click.aliexpress.com/e/_DDxoNNn
Porte lame : https://s.click.aliexpress.com/e/_DCCP6AV
Lames : https://s.click.aliexpress.com/e/_DDIv0Cp
Lames : https://s.click.aliexpress.com/e/_DcfMyAH
Outils échenillage : https://s.click.aliexpress.com/e/_Dm7rGVL
Kit pose : https://s.click.aliexpress.com/e/_Dm70mJP
Plotter un peu moins cher : https://s.vevor.com/bfQNVj
Pour info, la réponse a été donnée pour le laser. C'est pour détecter des repères pour la découpe d'autocollants imprimés. Merci à ceux qui ont donné cette précision.
Je viens de faire l'essais, il n'y a pas de lecture optique, c'est fait pour régler l'origine en faisant coïncider le point du laser avec une marque imprimée.
Visitez mon site: http://www.Cyrob.org
Sur Facebook: Cyrob.org
Discord : discord.gg/mNMSE53
Me contacter: info@cyrob.org
Rappel: Je ne vends rien et ne propose aucun service, même payant.
Supporter Cyrob.org :
http://philippe.demerliac.free.fr/Support.htm
00:00 Introduction
03:55 Présentation globale
12:28 Premier test
19:00 Exemple de dessin
23:26 Exemple de découpe
25:17 Echenillage et pose
29:32 Test petits caractères
31:41 Test PCB
32:28 Découpe carton
34:11 Consommables et accessoires
37:43 Conclusion
40:31 Annonce "Live"
40:42 Karo-Lin
Déontologie de la chaine:
http://philippe.demerliac.free.fr/Articles/Policy/Cyrob_Policy.htm
#Cyrob #vevor #diy #Signmaster
Merci à Frédérique pour ce schéma.
Vous pouvez m'envoyer des schémas pour analyse.
Ils doivent répondre aux critères suivants:
- Tenir sur une image unique - de 1Mb (Jpeg, Bmp, Gif) (Pdf d’une page)
- Être lisible
- Pas trop complexe pour que l’explication reste simple (Une sous partie d’un schéma complexe est acceptée)
- La fonction du schéma peut être indiquée ou non ce qui permet d’essayer de la deviner pour le fun….
- Sauf indication contraire, je citerai le prénom de l’envoyeur
- N’envoyez que des schémas « Public » ou dont vous êtes sûr d’avoir les droits.
En cas de litige, je donnerai votre mail comme source.
- Envoyez exclusivement à info@cyrob.org
Visitez mon site: http://www.Cyrob.org
Sur Facebook: Cyrob.org
Discord : discord.gg/mNMSE53
Me contacter: info@cyrob.org
Rappel: Je ne vends rien et ne propose aucun service, même payant.
Supporter Cyrob.org :
http://philippe.demerliac.free.fr/Support.htm
00:00 Introduction
01:09 Analyse détaillée
18:53 Conclusion
20:08 Annonce "Live"
20:15 Karo-Lin
Déontologie de la chaine:
http://philippe.demerliac.free.fr/Articles/Policy/Cyrob_Policy.htm
#Cyrob #electronique #schematics
Les QDN ne sont PAS des vidéos de placement de produits.
Je ne suis sponsorisé par personne et j’ai acheté tout ce que j’y présente comme n’importe quel client.
Je n’achète pas des produits pour les montrer dans des QDN, j’achète des produits pour mon propre usage et en montre certains afin de faire profiter d’autres Internautes de mes expériences d’achats.
Que vous les achetiez ou non m’indiffère totalement.
Je donne mon avis à un instant T, et ne saurais être tenu responsable d’éventuelles déconvenues que vous pourriez rencontrer avec ces produits qu’il vous faudra régler avec votre fournisseur.
Merci de votre compréhension.
Infos pour retrouver les produits présentés:
Je mets le lien de là où je l'ai trouvé, pas forcément le moins cher
Ces objets se trouvent souvent sur plusieurs sites, à vous de chercher et faire jouer la concurrence.
NOTE : Certains objets ne SONT plus dispos et donc non listés ici
ATTENTION : Certaines pages proposent des options, bien sélectionner avant d'acheter !
BMJ----------------------------------
Support: bmjelec.com/produit/support-multifonction
Décolleur: bmjelec.com/produit/decolle-etiquette
Vapo Iso: bmjelec.com/produit/alcool-isopropylique-vaporisateur
Ali-Express----------------------------------
Pince plieuse: https://s.click.aliexpress.com/e/_Def3pIV
Gauge Filetage: https://s.click.aliexpress.com/e/_DmYZj2H
Test filetage: https://s.click.aliexpress.com/e/_DkzwMDJ
Feutres blanc: https://s.click.aliexpress.com/e/_DlxJRmN
Forets: https://s.click.aliexpress.com/e/_DBJxrxr
Insert: https://s.click.aliexpress.com/e/_DC9BueZ
Feutre métal: https://s.click.aliexpress.com/e/_DENRePT
Tournevis Triangle: https://s.click.aliexpress.com/e/_DlN3NrJ
Connecteurs SMA: https://s.click.aliexpress.com/e/_DB3jkFb
Atténuateurs SMA: https://s.click.aliexpress.com/e/_Dl9xZlj
PCB Attn: https://s.click.aliexpress.com/e/_DcjBrD3
Filtre: https://s.click.aliexpress.com/e/_DCoytPn
Pinces ER: https://s.click.aliexpress.com/e/_DdGoDct
CM2 ER25: https://s.click.aliexpress.com/e/_DCPFSdR
Prise USB: https://s.click.aliexpress.com/e/_DC0tc8V
Panel USB: https://s.click.aliexpress.com/e/_Dejzlw9
USB C M/F: https://s.click.aliexpress.com/e/_DEv2blT
USBC Rond: https://s.click.aliexpress.com/e/_DmF3mdf
Rondelles fines: https://s.click.aliexpress.com/e/_DdiKHC1
Foret Taraudeur: https://s.click.aliexpress.com/e/_Ddob5CD
Vis Hex: https://s.click.aliexpress.com/e/_DBbMkwD
Vis mini: https://s.click.aliexpress.com/e/_DFr84tB
Vis Inox: https://s.click.aliexpress.com/e/_DkNHVeV
Scratch: https://s.click.aliexpress.com/e/_DnMSW61
Prise Bat: https://s.click.aliexpress.com/e/_DBSG60l
Diode: https://s.click.aliexpress.com/e/_DCL0ymp
Régulateurs: https://s.click.aliexpress.com/e/_Dd6UCmh
Prises Bananes: https://s.click.aliexpress.com/e/_Ddk1TTr
Aiguilles: https://s.click.aliexpress.com/e/_DB4fwlP
Voltmètre signe: https://s.click.aliexpress.com/e/_DC5P1ot
Colle: https://s.click.aliexpress.com/e/_DlsgfXX
Pipette: https://s.click.aliexpress.com/e/_DBbaWbb
Presse montre: https://s.click.aliexpress.com/e/_DFJoa3b
Plateau élévateur: https://s.click.aliexpress.com/e/_De8YbJF
Visitez mon site: http://www.Cyrob.org
Sur Facebook: Cyrob.org
Discord : discord.gg/mNMSE53
Me contacter: info@cyrob.org
Rappel: Je ne vends rien et ne propose aucun service, même payant.
Supporter Cyrob.org :
http://philippe.demerliac.free.fr/Support.htm
00:00 Introduction
00:15 Présentation des objets
29:08 Conclusion
29:48 Annonce "Live"
30:04 Mo-Riss
Déontologie de la chaine:
http://philippe.demerliac.free.fr/Articles/Policy/Cyrob_Policy.htm
#Cyrob #QDN
Vidéo plus longue que d'habitude mais le sujet est vaste :)
Existe en 2 et 4 voies en 70 et 100MHz, soit 4 modèles
Les modèles DHO900 sont sur des bases identiques avec en plus un option d'analyse logique et de meilleurs performances.
Site Rigol : https://www.rigol.eu/products/oscillosopes/112.html
Page Polytech : jeulin.com/polytech_fr/297790.html
La gamme : jeulin.com/polytech_fr/polytech/oscilloscope/oscilloscope-numerique.html?att_107208=7%22&att_150129%5B0%5D=70+MHz&att_150129%5B1%5D=100+MHz&att_406490=1%2C25+G%C3%A9ch%2Fs&att_95716=Rigol
Pour info, Polytech accorde parfois des réductions aux "Cyrobiens", cela ne coûte rien de demander :)
Si vous voulez voir l'intérieur : youtu.be/KQF4UzLPpr0?si=MK39V5iYi0A7z7GJ
Visitez mon site: http://www.Cyrob.org
Sur Facebook: Cyrob.org
Discord : discord.gg/mNMSE53
Me contacter: info@cyrob.org
Rappel: Je ne vends rien et ne propose aucun service, même payant.
Supporter Cyrob.org :
http://philippe.demerliac.free.fr/Support.htm
00:00 Introduction
00:32 Déballage
03:47 Examen statique
08:04 Alimentation
11:44 Sonde
13:33 Première mise en route
16:00 Compensation sonde
18:28 Utilitaires
21:57 Utilisation avec navigateur
25:26 Exemples de mesures
35:18 Pass-Fail
38:40 Bande passante
42:24 Mode Roll
42:48 Mode XY
43:07 Réglages défaut
44:58 Les points forts et faibles
51:54 Conclusion
54:22 Mo-Riss
Déontologie de la chaine:
http://philippe.demerliac.free.fr/Articles/Policy/Cyrob_Policy.htm
#Cyrob #Rigol #polytech #oscilloscope