Uploaded January 2020 | Updated November 2026, 1 day ago
This is project 31 from the 200-in-One Kit from Tandy/Radio Shack. Of course, I made it on breadboard, as my kit had parts removed from it years ago. Plus, I much prefer breadboards anyway.
This shows charging and discharging electrolytic capacitors. The charge time and switch time... The light seems to fade out at the same speed whether I keep the switch in Position A for short or long. That's because there is no series resistor with the capacitor, so the time constant, RC, is extremely small, as resistance is essentially zero. So it charges so fast, that even if I do the switch really quickly, it is the same fade-out of the LED as when I do the switch charging for longer. If I stuck a resistor in series with the capacitor, the charge time could be made long.
Remember, I am not the author of this text or circuit!! This is from the kit's manual. I am simply reading the text and building the circuit.
Microphone: Shure SM57 with foam around it as a homemade pop filter. Then voice processed through a Symetrix 528E.
This is project 31 from the 200-in-One Kit from Tandy/Radio Shack. Of course, I made it on breadboard, as my kit had parts removed from it years ago. Plus, I much prefer breadboards anyway.
This shows charging and discharging electrolytic capacitors. The charge time and switch time... The light seems to fade out at the same speed whether I keep the switch in Position A for short or long. That's because there is no series resistor with the capacitor, so the time constant, RC, is extremely small, as resistance is essentially zero. So it charges so fast, that even if I do the switch really quickly, it is the same fade-out of the LED as when I do the switch charging for longer. If I stuck a resistor in series with the capacitor, the charge time could be made long.
Remember, I am not the author of this text or circuit!! This is from the kit's manual. I am simply reading the text and building the circuit.
Microphone: Shure SM57 with foam around it as a homemade pop filter. Then voice processed through a Symetrix 528E.





![Bye Bye 2020 [Speaker Destruction with SpeakerFreak95!]
Yes. A speaker harmed in this video. Yes. I am aware. No. They were not in a pair. This one was all by itself.
This speaker is a scapegoat, or a scapespeaker for the horrible year of 2020. In honour of 2020 coming to a close, Jordan did the Last Rites of this speaker, blowing it out, once and for all, but not until after writing 2020 on its cone.
The destroyed unit was a Realistic MC-800. Please dont stone me!
The song at the end is a song I made earlier this year called Corona-Scare. Jordan and I will be doing a radio show tonight for the turn of the year, where I play more of my hits (many that are not on YouTube), and I will put a link into that once it is uploaded, into this description box.
Shoutout to Lord Dookster!
RADIO SHOW OF ME AND JORDAN PLAYING MANY TRKE SONGS DOWNLOAD:
https://www.mediafire.com/file/rynid8bhoximcvm/New+Years+Show+2021+-+TRKE+-+JTRADIO.wav/file Bye Bye 2020 [Speaker Destruction with SpeakerFreak95!]](https://i.ytimg.com/vi/DMvC78XnPoY/mqdefault.jpg)

![At My Desk 6 Mechanical Pencils from Old to New [ASMR Writing]
Here is the sixth installment of the AT MY DESK series, complete with low voice.
Showing old pencils such as a baseball bat (maker unknown), Quickpoint, Ritepoint, a Bell Telephone (Ma Bell!), Brass, and Muji pencils.
Decades include the 1940s to the 2010s!
VIDEO ID: 7803857868242545876208756405250-48956456 At My Desk 6 Mechanical Pencils from Old to New [ASMR Writing]](https://i.ytimg.com/vi/DxMv-fQDsRE/mqdefault.jpg)


