Uploaded May 2026 | Updated November 2026, 5 days ago
Stuff I used in the video:
Phosphoric Acid Rust Dissolver OSPHO: amzn.to/3RfuDVr
Triethanolamine (TEA) Flash Rust Inhibitor: amzn.to/42WhYcv
Citric Acid(makes great rust removers): amzn.to/4dwkyw2
PH test strips for the Rust Cleansers: amzn.to/3P4fu8R
My NEW 3m Mask w/quick drop: amzn.to/48NXvtX
After Thoughts about the Video: 70hours in so far to go from sandblasting to minor rust repair to dent metalworking to epoxy primer. Still a lot more steps and parts to go. The 3 step rust process worked amazingly well.
RUST CHEMICALS RECIPES video: youtu.be/qFr5E-CABUI?si=xlCidY3_Or_bKP76
TEA Triethanolamine as a rust inhibitor: You could mix it with distilled water at a ratio of 200:1(1 liter water:5ml/tsp T.E.A) and spray it over any bare steel surface to hold off rust. In the video the yellow/last spray I used was 500ml Ammonia(lemon scent which is not important) 500ml of distilled water and 5ml/1tsp T.E.A. How it Works: It removes surface contaminants like salts, oils, and grease, reducing the risk of premature rust. Natural salts in the water and air are what causes flash rust. The Ammonia is a great degreaser and helps remove any oils.
Ginger Wish list: amazon.com/registries/gl/guest-view/30KGVA882TZRA
Buy Ginger a new bone: paypal.com/donate/?hosted_button_id=NS699E56WTYHL
instagram.com/sixtyfiveford
facebook.com/sixtyfiveford
65 Ford 65Ford SFF
Stuff I used in the video:
Phosphoric Acid Rust Dissolver OSPHO: amzn.to/3RfuDVr
Triethanolamine (TEA) Flash Rust Inhibitor: amzn.to/42WhYcv
Citric Acid(makes great rust removers): amzn.to/4dwkyw2
PH test strips for the Rust Cleansers: amzn.to/3P4fu8R
My NEW 3m Mask w/quick drop: amzn.to/48NXvtX
After Thoughts about the Video: 70hours in so far to go from sandblasting to minor rust repair to dent metalworking to epoxy primer. Still a lot more steps and parts to go. The 3 step rust process worked amazingly well.
RUST CHEMICALS RECIPES video: youtu.be/qFr5E-CABUI?si=xlCidY3_Or_bKP76
TEA Triethanolamine as a rust inhibitor: You could mix it with distilled water at a ratio of 200:1(1 liter water:5ml/tsp T.E.A) and spray it over any bare steel surface to hold off rust. In the video the yellow/last spray I used was 500ml Ammonia(lemon scent which is not important) 500ml of distilled water and 5ml/1tsp T.E.A. How it Works: It removes surface contaminants like salts, oils, and grease, reducing the risk of premature rust. Natural salts in the water and air are what causes flash rust. The Ammonia is a great degreaser and helps remove any oils.
Ginger Wish list: amazon.com/registries/gl/guest-view/30KGVA882TZRA
Buy Ginger a new bone: paypal.com/donate/?hosted_button_id=NS699E56WTYHL
instagram.com/sixtyfiveford
facebook.com/sixtyfiveford
65 Ford 65Ford SFF










