Uploaded January 2017 | Updated November 2026, 1 day ago
These 3 handbrakes can be easily converted for your sim racing rig for drifting or rally. By adding a switch or converting to analog with minimal fabrication. All these cheap Ebrakes can be found on Ebay
Best Hydro Handbrake to use - ebay.us/6Lgwxy
This site contains affiliate links for which I may be compensated
You can buy a good Fanatec handbrake here:
https://www.fanatec.com?utm_medium=FAP+Banner&utm_source=AMSTUDIO&utm_campaign=General+Links&a_aid=AMSTUDIO
| REVIEW |
The model at 0:43 has an adjustable handle. But is the worst of the bunch. The handle is badly designed and has 2 edges that stick out just below the grip, and unless you grab the foam grip in the exact spot, these dig into your hand and will be annoying mid race or drift. Also not to mention the handle is flat. The lever action was ok but it will need alot of grease on the rollers to keep it quiet. I do not recommend buying this one unless you plan on swapping the handle.
The model at 1:28 was the smoothest operating. Has a nice solid handle with holes. A good choice if you don't want to have a foam grip. Most expensive of the group. The action of rod/bolt pushing the cylinder wasn't quite as linear compare to the next model.
The model at 1:04 was the easiest to mod, had a nice cylinder handle with foam grip, which also fits higher quality MTB silicon grips. The push onto the cylinder stayed linear and is a great option for an USB analogue mod / hack. It did need some greasing in the pivot points but worked very smooth once adjusted. Also has the ability to flip the handle for vertical or horizontal mounting options.
THANK YOU for watching, all your question and comments are welcome.
Adapt this USB handbrake mod.
youtu.be/NQaogjVaQek
Adapt this Analog Mod
youtu.be/kv0FTpRLFMY
Enjoyed the content consider supporting here patreon.com/AMSTUDIO
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
creativecommons.org/licenses/by-nc-nd/4.0
These 3 handbrakes can be easily converted for your sim racing rig for drifting or rally. By adding a switch or converting to analog with minimal fabrication. All these cheap Ebrakes can be found on Ebay
Best Hydro Handbrake to use - ebay.us/6Lgwxy
This site contains affiliate links for which I may be compensated
You can buy a good Fanatec handbrake here:
https://www.fanatec.com?utm_medium=FAP+Banner&utm_source=AMSTUDIO&utm_campaign=General+Links&a_aid=AMSTUDIO
| REVIEW |
The model at 0:43 has an adjustable handle. But is the worst of the bunch. The handle is badly designed and has 2 edges that stick out just below the grip, and unless you grab the foam grip in the exact spot, these dig into your hand and will be annoying mid race or drift. Also not to mention the handle is flat. The lever action was ok but it will need alot of grease on the rollers to keep it quiet. I do not recommend buying this one unless you plan on swapping the handle.
The model at 1:28 was the smoothest operating. Has a nice solid handle with holes. A good choice if you don't want to have a foam grip. Most expensive of the group. The action of rod/bolt pushing the cylinder wasn't quite as linear compare to the next model.
The model at 1:04 was the easiest to mod, had a nice cylinder handle with foam grip, which also fits higher quality MTB silicon grips. The push onto the cylinder stayed linear and is a great option for an USB analogue mod / hack. It did need some greasing in the pivot points but worked very smooth once adjusted. Also has the ability to flip the handle for vertical or horizontal mounting options.
THANK YOU for watching, all your question and comments are welcome.
Adapt this USB handbrake mod.
youtu.be/NQaogjVaQek
Adapt this Analog Mod
youtu.be/kv0FTpRLFMY
Enjoyed the content consider supporting here patreon.com/AMSTUDIO
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
creativecommons.org/licenses/by-nc-nd/4.0










